Precipitation-induced runoff and leaching from milled peat mining mires by peat types : a comparative method for estimating the loading of water bodies during peat pruduction

Precipitation-induced runoff and leaching from milled peat mining mires by peat types: a comparative method for estimating the loading of water bodies during peat production. This research project in environmental geology has arisen out of an observed need to be able to predict more accurately the loading of watercourses with detrimental organic substances and nutrients from already existing and planned peat production areas, since the authorities capacity for insisting on such predictions covering the whole duration of peat production in connection with evaluations of environmental impact is at present highly limited. National and international decisions regarding monitoring of the condition of watercourses and their improvement and restoration require more sophisticated evaluation methods in order to be able to forecast watercourse loading and its environmental impacts at the stage of land-use planning and preparations for peat production.The present project thus set out from the premise that it would be possible on the basis of existing mire and peat data properties to construct estimates for the typical loading from production mires over the whole duration of their exploitation. Finland has some 10 million hectares of peatland, accounting for almost a third of its total area. Macroclimatic conditions have varied in the course of the Holocene growth and development of this peatland, and with them the habitats of the peat-forming plants. Temperatures and moisture conditions have played a significant role in determining the dominant species of mire plants growing there at any particular time, the resulting mire types and the accumulation and deposition of plant remains to form the peat. The above climatic, environmental and mire development factors, together with ditching, have contributed, and continue to contribute, to the existence of peat horizons that differ in their physical and chemical properties, leading to differences in material transport between peatlands in a natural state and mires that have been ditched or prepared for forestry and peat production. Watercourse loading from the ditching of mires or their use for peat production can have detrimental effects on river and lake environments and their recreational use, especially where oxygen-consuming organic solids and soluble organic substances and nutrients are concerned. It has not previously been possible, however, to estimate in advance the watercourse loading likely to arise from ditching and peat production on the basis of the characteristics of the peat in a mire, although earlier observations have indicated that watercourse loading from peat production can vary greatly and it has been suggested that differences in peat properties may be of significance in this. Sprinkling is used here in combination with simulations of conditions in a milled peat production area to determine the influence of the physical and chemical properties of milled peats in production mires on surface runoff into the drainage ditches and the concentrations of material in the runoff water. Sprinkling and extraction experiments were carried out on 25 samples of milled Carex (C) and Sphagnum (S) peat of humification grades H 2.5 8.5 with moisture content in the range 23.4 89% on commencement of the first sprinkling, which was followed by a second sprinkling 24 hours later. The water retention capacity of the peat was best, and surface runoff lowest, with Sphagnum and Carex peat samples of humification grades H 2.5 6 in the moisture content class 56 75%. On account of the hydrophobicity of dry peat, runoff increased in a fairly regular manner with drying of the sample from 55% to 24 30%. Runoff from the samples with an original moisture content over 55% increased by 63% in the second round of sprinkling relative to the first, as they had practically reached saturation point on the first occasion, while those with an original moisture content below 55% retained their high runoff in the second round, due to continued hydrophobicity. The well-humified samples (H 6.5 8.5) with a moisture content over 80% showed a low water retention capacity and high runoff in both rounds of sprinkling. Loading of the runoff water with suspended solids, total phosphorus and total nitrogen, and also the chemical oxygen demand (CODMn O2), varied greatly in the sprinkling experiment, depending on the peat type and degree of humification, but concentrations of the same substances in the two sprinklings were closely or moderately closely correlated and these correlations were significant. The concentrations of suspended solids in the runoff water observed in the simulations of a peat production area and the direct surface runoff from it into the drainage ditch system in response to rain (sprinkling intensity 1.27 mm/min) varied c. 60-fold between the degrees of humification in the case of the Carex peats and c. 150-fold for the Sphagnum peats, while chemical oxygen demand varied c. 30-fold and c. 50-fold, respectively, total phosphorus c. 60-fold and c. 66-fold, total nitrogen c. 65-fold and c. 195-fold and ammonium nitrogen c. 90-fold and c. 30-fold. The increases in concentrations in the runoff water were very closely correlated with increases in humification of the peat. The correlations of the concentrations measured in extraction experiments (48 h) with peat type and degree of humification corresponded to those observed in the sprinkler experiments. The resulting figures for the surface runoff from a peat production area into the drainage ditches simulated by means of sprinkling and material concentrations in the runoff water were combined with statistics on the mean extent of daily rainfall (0 67 mm) during the frost-free period of the year (May October) over an observation period of 30 years to yield typical annual loading figures (kg/ha) for suspended solids (SS), chemical oxygen demand of organic matter (CODmn O2), total phosphorus (tot. P) and total nitrogen (tot. N) entering the ditches with respect to milled Carex (C) and Sphagnum (S) peats of humification grades H 2.5 8.5. In order to calculate the loading of drainage ditches from a milled peat production mire with the aid of these annual comparative values (in kg/ha), information is required on the properties of the intended production mire and its peat. Once data are available on the area of the mire, its peat depth, peat types and their degrees of humification, dry matter content, calorific value and corresponding energy content, it is possible to produce mutually comparable estimates for individual mires with respect to the annual loading of the drainage ditch system and the surrounding watercourse for the whole service life of the production area, the duration of this service life, determinations of energy content and the amount of loading per unit of energy generated (kg/MWh). In the 8 mires in the Köyhäjoki basin, Central Ostrobothnia, taken as an example, the loading of suspended solids (SS) in the drainage ditch networks calculated on the basis of the typical values obtained here and existing mire and peat data and expressed per unit of energy generated varied between the mires and horizons in the range 0.9 16.5 kg/MWh. One of the aims of this work was to develop means of making better use of existing mire and peat data and the results of corings and other field investigations. In this respect combination of the typical loading values (kg/ha) obtained here for S, SC, CS and C peats and the various degrees of humification (H 2.5 8.5) with the above mire and peat data by means of a computer program for the acquisition and handling of such data would enable all the information currently available and that deposited in the system in the future to be used for defining watercourse loading estimates for mires and comparing them with the corresponding estimates of energy content. The intention behind this work has been to respond to the challenge facing the energy generation industry to find larger peat production areas that exert less loading on the environment and to that facing the environmental authorities to improve the means available for estimating watercourse loading from peat production and its environmental impacts in advance. The results conform well to the initial hypothesis and to the goals laid down for the research and should enable watercourse loading from existing and planned peat production to be evaluated better in the future and the resulting impacts to be taken into account when planning land use and energy generation. The advance loading information available in this way would be of value in the selection of individual peat production areas, the planning of their exploitation, the introduction of water protection measures and the planning of loading inspections, in order to achieve controlled peat production that pays due attention to environmental considerations.

Essays on Economic Integration and Labour Demand

This dissertation consists of an introductory section and three essays investigating the effects of economic integration on labour demand by using theoretical models and by empirical analysis. The essays adopt an intra-industry trade approach to specify a theoretical framework of estimation for determining the effects of economic integration on employment. In all the essays the empirical aim is to explore the labour demand consequences of European integration. The first essay analyzes how labour-demand elasticities with own price have changed during the process of economic integration. As a theoretical result, intensified trade competition increases labour-demand elasticity, whereas better advantage of economies of scale decreases labour-demand elasticity by decreasing the elasticity of substitution between differentiated products. Furthermore, if integration gives rise to an increase in input-substitutability and/or outsourcing activities, labour demand will become more elastic. Using data from the manufacturing sector from 1975 to 2002, the empirical results provide support for the hypothesis that European integration has contributed to increased elasticities of total labour demand in Finland. The second essay analyzes how economic integration affects the impact of welfare poli-cies on employment. The essay considers the viability of financing the public sector, i.e. public consumption and social security expenses, by general labour taxation in an economy which has become more integrated into international product markets. The theoretical results of the second essay indicate that, as increased trade competition crowds out better economies of scale, it becomes more costly to maintain welfare systems financed by labour taxation. Using data from European countries for the years 1975 to 2004, the empirical results provide inconsistent evidence for the hypothesis that economic integration has contributed to the distortion effects of welfare policies on employment. The third essay analyzes the impact of profit sharing on employment as a way to introduce wage flexibility into the process of economic integration. The results of the essay suggest that, in theory, the effects of economic integration on the impact of profit sharing on employment clearly depend on a trade-off between intensified competition and better advantage of economies of scale. If product market competition increases, the ability of profit sharing to improve employment through economic integration increases with moderated wages. While, the economic integration associating with market power in turn decrease the possibilities of profit sharing with higher wages to improve employment. Using data from the manufacturing sector for the years 1996 to 2004, the empirical results show that profit-sharing has a positive impact on employment during the process of European integration, but can have ambiguous effects on the stability of employment in Finland.

Relationship Drivers in Provider - Consumer Relationships. Empirical Studies of Customer Loyalty Programs (första upplagan slutsåld / first edition sold out, 'print on demand' 60 €)

The study addressed a phenomenon that has become common marketing practice, customer loyalty programs. Although a common type of consumer relationship, there is limited knowledge of its nature. The purpose of the study was to create structured understanding of the nature of customer relationships from both the provider’s and the consumer’s viewpoints by studying relationship drivers and proposing the concept of relational motivation as a provider of a common framework for the analysis of these views. The theoretical exploration focused on reasons for engaging in customer relationships for both the consumer and the provider. The themes of buying behaviour, industrial and network marketing and relationship marketing, as well as the concepts of a customer relationship, customer loyalty, relationship conditions, relational benefits, bonds and commitment were explored and combined in a new way. Concepts from the study of business-to-business relationships were brought over and their power in explaining the nature of consumer relationships examined. The study provided a comprehensive picture of loyalty programs, which is an important contribution to the academic as well as the managerial discussions. The consumer study provided deep insights into the nature of customer relationships. The study provides a new frame of reference to support the existing concepts of loyalty and commitment with the introduction of the relationship driver and relational motivation concepts. The result is a novel view of the nature of customer relationships that creates new understanding of the forces leading to loyal behaviour and commitment. The study concludes with managerial implications.

Understanding Customer Loyalty and Disloyalty The Effect of Loyalty-Supporting and -Repressing Factors (first edition sold out, 'print on demand' 60 €)

Customer loyalty has been a central topic of both marketing theory and practice for several decades. Customer disloyalty, or relationship ending, has received much less attention. Despite the close relation between customer loyalty and disloyalty, they have rarely been addressed in the same study. The thesis bridges this gap by focusing on both loyal and disloyal customers and the factors characterising them. Based on a qualitative study of loyal and disloyal bank customers in the Finnish retail banking market, both factors that are common to the groups and factors that differentiate between them are identified. A conceptual framework of factors that affect customer loyalty or disloyalty is developed and used to analyse the empirical data. According to the framework, customers’ loyalty status (behavioural and attitudinal loyalty) is influenced by positive, loyalty-supporting, and negative, loyalty-repressing factors. Loyalty-supporting factors either promote customer dedication, making the customer want to remain loyal, or act as constraints, hindering the customer from switching. Among the loyalty-repressing factors it is especially important to identify those that act as triggers of disloyal behaviour, making customers switch service providers. The framework further suggests that by identifying the sources of loyalty-supporting and -repressing factors (the environment, the provider, the customer, the provider-customer interaction, or the core service) one can determine which factors are within the control of the service provider. Attitudinal loyalty is approached through a customer’s “feeling of loyalty”, as described by customers both orally and graphically. By combining the graphs with behavioural loyalty, seven customer groups are identified: Stable Loyals, Rescued Loyals, Loyals at Risk, Positive Disloyals, Healing Disloyals, Fading Disloyals, and Abrupt Disloyals. The framework and models of the thesis can be used to analyse factors that affect customer loyalty and disloyalty in different service contexts. Since the empirical study was carried out in a retail bank setting, the thesis has managerial relevance especially for banks. Christina Nordman is associated with CERS, Center for Relationship Marketing and Service Management at the Swedish School of Economics and Business Administration. The doctoral thesis is part of the Göran Collert Research Project in Customer Relationships and Retail Banking and has been funded by The Göran Collert Foundation.

Corporate Environmental Responsibility in Demand Networks (summary section only)

Research on corporate responsibility has traditionally focused on the responsibilities of companies within their corporate boundaries only. Yet this view is challenged today as more and more companies face the situation in which the environmental and social performance of their suppliers, distributors, industry or other associated partners impacts on their sales performance and brand equity. Simultaneously, policy-makers have taken up the discussion on corporate responsibility from the perspective of globalisation, in particular of global supply chains. The category of selecting and evaluating suppliers has also entered the field of environmental reporting. Companies thus need to tackle their responsibility in collaboration with different partners. The aim of the thesis is to further the understanding of collaboration and corporate environmental responsibility beyond corporate boundaries. Drawing on the fields of supply chain management and industrial ecology, the thesis sets out to investigate inter-firm collaboration on three different levels, between the company and its stakeholders, in the supply chain, and in the demand network of a company. The thesis is comprised of four papers: Paper A discusses the use of different research approaches in logistics and supply chain management. Paper B introduces the study on collaboration and corporate environmental responsibility from a focal company perspective, looking at the collaboration of companies with their stakeholders, and the salience of these stakeholders. Paper C widens this perspective to an analysis on the supply chain level. The focus here is not only beyond corporate boundaries, but also beyond direct supplier and customer interfaces in the supply chain. Paper D then extends the analysis to the demand network level, taking into account the input-output, competitive and regulatory environments, in which a company operates. The results of the study broaden the view of corporate responsibility. By applying this broader view, different types of inter-firm collaboration can be highlighted. Results also show how environmental demand is extended in the supply chain regardless of the industry background of the company.

Simulating and Forecasting the Demand for New Consumer Durables

A diffusion/replacement model for new consumer durables designed to be used as a long-term forecasting tool is developed. The model simulates new demand as well as replacement demand over time. The model is called DEMSIM and is built upon a counteractive adoption model specifying the basic forces affecting the adoption behaviour of individual consumers. These forces are the promoting forces and the resisting forces. The promoting forces are further divided into internal and external influences. These influences are operationalized within a multi-segmental diffusion model generating the adoption behaviour of the consumers in each segment as an expected value. This diffusion model is combined with a replacement model built upon the same segmental structure as the diffusion model. This model generates, in turn, the expected replacement behaviour in each segment. To be able to use DEMSIM as a forecasting tool in early stages of a diffusion process estimates of the model parameters are needed as soon as possible after product launch. However, traditional statistical techniques are not very helpful in estimating such parameters in early stages of a diffusion process. To enable early parameter calibration an optimization algorithm is developed by which the main parameters of the diffusion model can be estimated on the basis of very few sales observations. The optimization is carried out in iterative simulation runs. Empirical validations using the optimization algorithm reveal that the diffusion model performs well in early long-term sales forecasts, especially as it comes to the timing of future sales peaks.

Does Uncertainty Affect Investment and Labor Demand?

This paper analyzes the effect of uncertainty on investment and labor demand for Finnish firms during the time period 1987 – 2000. Utilizing a stock return based measure of uncertainty decomposed into systematic and idiosyncratic components, the results reveal that idiosyncratic uncertainty significantly reduces both investment and labor demand. Idiosyncratic uncertainty seems to influence investment in the current period, whereas the depressing effect on labor demand appears with a one-year lag. The results provide support that the depressing effect of idiosyncratic uncertainty on investment is stronger for small firms in comparison to large firms. Some evidence is reported regarding differential effects of uncertainty on labor demand conditional on firm characteristics. Most importantly, the depressing effect of lagged idiosyncratic uncertainty on labor demand tends to be stronger for diversified firms compared with focused firms.

Essays on labour demand and wage formation

The first essay in this thesis is on gender wage differentials among manufacturing sector white-collar workers. The wage differential is decomposed into firm, job (within-firm) and individ-ual-level components. Job-level gender segregation explains over half of the gap, while firm-level segregation is not important. After controlling for firm, job and individual characteristics, the remaining unexplained wage cap to the advantage of men is six per cent of men s mean wage. In the second essay, I study how the business cycle and gender affect the distribution of the earnings losses of displaced workers. The negative effect of displacement is large, persistent and strongest in the lowest earnings deciles. The effect is larger in a recession than in a recov-ery period, and in all periods women s earnings drop more than men s earnings. The third essay shows that the transition from steady employment to disability pension de-pends on the stringency of medical screening and the degree of experience-rating of pension costs applied to the employer. The fact that firms have to bear part of the cost of employees disability pension costs lowers both the incidence of long sick leave periods and the probabil-ity that sick leave ends in a disability pension. The fourth and fifth essays are studies on the employment, wage and profit effects of a re-gional payroll tax cut experiment conducted in northern and eastern Finland. The results show no statistically significant effect on any of the response variables.