Ultrasound-assisted surface engineering of pharmaceutical powders

Effective processing of powdered particles can facilitate powder handling and result in better drug product performance, which is of great importance in the pharmaceutical industry where the majority of active pharmaceutical ingredients (APIs) are delivered as solid dosage forms. The purpose of this work was to develop a new ultrasound-assisted method for particle surface modification and thin-coating of pharmaceutical powders. The ultrasound was used to produce an aqueous mist with or without a coating agent. By using the proposed technique, it was possible to decrease the interparticular interactions and improve rheological properties of poorly-flowing water-soluble powders by aqueous smoothing of the rough surfaces of irregular particles. In turn, hydrophilic polymer thin-coating of a hydrophobic substance diminished the triboelectrostatic charge transfer and improved the flowability of highly cohesive powder. To determine the coating efficiency of the technique, the bioactive molecule β-galactosidase was layered onto the surface of powdered lactose particles. Enzyme-treated materials were analysed by assaying the quantity of the reaction product generated during enzymatic cleavage of the milk sugar. A near-linear increase in the thickness of the drug layer was obtained during progressive treatment. Using the enzyme coating procedure, it was confirmed that the ultrasound-assisted technique is suitable for processing labile protein materials. In addition, this pre-treatment of milk sugar could be used to improve utilization of lactose-containing formulations for populations suffering from severe lactose intolerance. Furthermore, the applicability of the thin-coating technique for improving homogeneity of low-dose solid dosage forms was shown. The carrier particles coated with API gave rise to uniform distribution of the drug within the powder. The mixture remained homogeneous during further tabletting, whereas the reference physical powder mixture was subject to segregation. In conclusion, ultrasound-assisted surface engineering of pharmaceutical powders can be effective technology for improving formulation and performance of solid dosage forms such as dry powder inhalers (DPI) and direct compression products.

Ethics in a Technological World : Framing the Questions and Three Approaches

This study addresses the following question: How to think about ethics in a technological world? The question is treated first thematically by framing central issues in the relationship between ethics and technology. This relationship has three distinct facets: i) technological advance poses new challenges for ethics, ii) traditional ethics may become poorly applicable in a technologically transformed world, and iii) the progress in science and technology has altered the concept of rationality in ways that undermine ethical thinking itself. The thematic treatment is followed by the description and analysis of three approaches to the questions framed. First, Hans Jonas s thinking on the ontology of life and the imperative of responsibility is studied. In Jonas s analysis modern culture is found to be nihilistic because it is unable to understand organic life, to find meaning in reality, and to justify morals. At the root of nihilism Jonas finds dualism, the traditional Western way of seeing consciousness as radically separate from the material world. Jonas attempts to create a metaphysical grounding for an ethic that would take the technologically increased human powers into account and make the responsibility for future generations meaningful and justified. The second approach is Albert Borgmann s philosophy of technology that mainly assesses the ways in which technological development has affected everyday life. Borgmann admits that modern technology has liberated humans from toil, disease, danger, and sickness. Furthermore, liberal democracy, possibilities for self-realization, and many of the freedoms we now enjoy would not be possible on a large scale without technology. Borgmann, however, argues that modern technology in itself does not provide a whole and meaningful life. In fact, technological conditions are often detrimental to the good life. Integrity in life, according to him, is to be sought among things and practices that evade technoscientific objectification and commodification. Larry Hickman s Deweyan philosophy of technology is the third approach under scrutiny. Central in Hickman s thinking is a broad definition of technology that is nearly equal to Deweyan inquiry. Inquiry refers to the reflective and experiential way humans adapt to their environment by modifying their habits and beliefs. In Hickman s work, technology consists of all kinds of activities that through experimentation and/or reflection aim at improving human techniques and habits. Thus, in addition to research and development, many arts and political reforms are technological for Hickman. He argues for recasting such distinctions as fact/value, poiesis/praxis/theoria, and individual/society. Finally, Hickman does not admit a categorical difference between ethics and technology: moral values and norms need to be submitted to experiential inquiry as well as all the other notions. This study mainly argues for an interdisciplinary approach to the ethics of technology. This approach should make use of the potentialities of the research traditions in applied ethics, the philosophy of technology, and the social studies on science and technology and attempt to overcome their limitations. This study also advocates an endorsement of mid-level ethics that concentrate on the practices, institutions, and policies of temporal human life. Mid-level describes the realm between the instantaneous and individualistic micro-level and the universal and global macro level.

Ethics of Justification : A Defence of Contractualism

In What We Owe to Each Other, T.M. Scanlon formulated a new version of the ethical theory called contractualism. This theory took reasons considerations that count in favour of judgment-sensitive attitudes to be the fundamental normative notion. It then used normative reasons to first account for evaluative properties. For an object to be valuable, on this view, is for it to have properties that provide reasons to have favourable attitudes towards the bearer of value. Scanlon also used reasons to account for moral wrongness. His contractualism claims that an act is morally wrong if it is forbidden by any set of moral principles that no one could reasonably reject. My thesis consists of five previously published articles which attempt to clarify Scanlon s theory and to defend it against its critics. The first article defends the idea that normative reason-relations are fundamental against Joshua Gert. Gert argues that rationality is a more basic notion than reasons and that reasons can be analysed in terms of their rationally requiring and justifying dimensions. The second article explores the relationship between value and reasons. It defends Scanlon s view according to which reasons are the more basic than value against those who think that reasons are based on the evaluative realm. The last three articles defend Scanlon s views about moral wrongness. The first one of them discusses a classic objection to contractualist theories. This objection is that principles which no one could reasonably reject are redundant in accounting for wrongness. This is because we need a prior notion of wrongness to select those principles and because such principles are not required to make actions wrong or to provide reasons against wrong actions. The fourth article explores the distinctive reasons which contractualists claim there are for avoiding the wrong actions. The last article argues against the critics of contractualism who claim that contractualism has implausible normative consequences for situations related to the treatment of different-sized groups of people.

Ethics and Aesthetics : Intersections in Iris Murdoch's Philosophy

The study addresses the question concerning the relationship between ethics and aesthetics in the philosophy of Iris Murdoch. The main argument is that Murdoch s philosophy cannot be accurately understood without an understanding of the relationship she sees between the aesthetic experience and morality. Reading Murdoch s philosophy with this relationship in mind shows that it must be considered as a relevant alternative to the main forms of aesthetic-ethical theories. The study consists of seven previously published articles and a summary. It shows that Murdoch belongs to a tradition of philosophers who seek to broaden the scope of ethics by reference to aesthetic value and aesthetic experience. She sees an attitude responsible for aesthetic experiences as relevant for morality. However, she does not collapse morality into aesthetic experience. The two meet on the level of the subject s attitude towards its object, but there is a distinction between the experiences that accompany the attitudes. Aesthetic experiences can function as a clue to morals in that they present in a pleasing manner moral truths which otherwise might be psychologically too difficult to face. Murdoch equates the aesthetic attitude with virtuous love characterized by unselfish attention to its object. The primary object of such love is in Murdoch s account another human individual in her particularity. She compares the recognition of the other person as a particular existence to the experience of the Kantian sublime and offers her own version of the true sublime which is the experience of awe in the face of the infinity of the task of understanding others. One of the most central claims in Murdoch s philosophy is that human consciousness is evaluatively structured. This claim challenges the distinction between facts and values which has had an immense influence on modern moral philosophy. One argument with which Murdoch supports her claim is the nature of great literature. According to her, the standard of greatness in literature is the authors awareness of the independent existence of individuals in the particularity of their evaluative consciousnesses. The analysis of the standard of greatness in literature is also Murdoch s only argument for the claim that the primary object of the loving unselfish attention is the other particular individual. She is convinced that great literature reveals a deep truth about the human condition with its capacity to capture the particular. Abstract philo¬sophical discourse cannot compete with this capacity but it should take truths revealed by literature seriously in its theorising. Recognising this as Murdoch s stand on the question of the relation between philosophy and literature as forms of human discourse settles whether she is part of what has been called philosophy s turn to literature. The answer is yes.

Temporality of the Face-to-Face in Levinas' Ethics

This thesis focuses on a connection between temporality and ethics in the philosophy of Emmanuel Levinas. I argue that Levinas understanding of temporality is rooted in the function of pra-impression which in its turn does not belong to the intentional consciousness but reveals a subject as being open to the Other. In the face-to-face situation with the Other the pra-impression is an essential and constitutive force: it fractures the moment of the present, questions subjectivity and generates a new meaning of temporality. As a result a responsible subject is revealed; responsibility for the Other marks a latent birth of the subject which is prior to any origin of subjectivity, it discloses a meaning of time that does not belong to the subject but is found in the Other. In this study I suggest that pra-impression finds its productive force in language, the function of the feminine, and what Levinas calls the other in the same .

Engineering the pentose phosphate pathway of Saccharomyces cerevisiae for production of ethanol and xylitol

The baker s yeast Saccharomyces cerevisiae has a long tradition in alcohol production from D-glucose of e.g. starch. However, without genetic modifications it is unable to utilise the 5-carbon sugars D-xylose and L arabinose present in plant biomass. In this study, one key metabolic step of the catabolic D-xylose pathway in recombinant D-xylose-utilising S. cerevisiae strains was studied. This step, carried out by xylulokinase (XK), was shown to be rate-limiting, because overexpression of the xylulokinase-encoding gene XKS1 increased both the specific ethanol production rate and the yield from D xylose. In addition, less of the unwanted side product xylitol was produced. Recombinant D-xylose-utilizing S. cerevisiae strains have been constructed by expressing the genes coding for the first two enzymes of the pathway, D-xylose reductase (XR) and xylitol dehydrogenase (XDH) from the D-xylose-utilising yeast Pichia stipitis. In this study, the ability of endogenous genes of S. cerevisiae to enable D-xylose utilisation was evaluated. Overexpression of the GRE3 gene coding for an unspecific aldose reductase and the ScXYL2 gene coding for a xylitol dehydrogenase homologue enabled growth on D-xylose in aerobic conditions. However, the strain with GRE3 and ScXYL2 had a lower growth rate and accumulated more xylitol compared to the strain with the corresponding enzymes from P. stipitis. Use of the strictly NADPH-dependent Gre3p instead of the P. stipitis XR able to utilise both NADH and NADPH leads to a more severe redox imbalance. In a S. cerevisiae strain not engineered for D-xylose utilisation the presence of D-xylose increased xylitol dehydrogenase activity and the expression of the genes SOR1 or SOR2 coding for sorbitol dehydrogenase. Thus, D-xylose utilisation by S. cerevisiae with activities encoded by ScXYL2 or possibly SOR1 or SOR2, and GRE3 is feasible, but requires efficient redox balance engineering. Compared to D-xylose, D-glucose is a cheap and readily available substrate and thus an attractive alternative for xylitol manufacture. In this study, the pentose phosphate pathway (PPP) of S. cerevisiae was engineered for production of xylitol from D-glucose. Xylitol was formed from D-xylulose 5-phosphate in strains lacking transketolase activity and expressing the gene coding for XDH from P. stipitis. In addition to xylitol, ribitol, D-ribose and D-ribulose were also formed. Deletion of the xylulokinase-encoding gene increased xylitol production, whereas the expression of DOG1 coding for sugar phosphate phosphatase increased ribitol, D-ribose and D-ribulose production. Strains lacking phosphoglucose isomerase (Pgi1p) activity were shown to produce 5 carbon compounds through PPP when DOG1 was overexpressed. Expression of genes encoding glyceraldehyde 3-phosphate dehydrogenase of Bacillus subtilis, GapB, or NAD-dependent glutamate dehydrogenase Gdh2p of S. cerevisiae, altered the cellular redox balance and enhanced growth of pgi1 strains on D glucose, but co-expression with DOG1 reduced growth on higher D-glucose concentrations. Strains lacking both transketolase and phosphoglucose isomerase activities tolerated only low D-glucose concentrations, but the yield of 5-carbon sugars and sugar alcohols on D-glucose was about 50% (w/w).

Mu in vitro transposition applications in protein engineering

Transposons, mobile genetic elements that are ubiquitous in all living organisms have been used as tools in molecular biology for decades. They have the ability to move into discrete DNA locations with no apparent homology to the target site. The utility of transposons as molecular tools is based on their ability to integrate into various DNA sequences efficiently, producing extensive mutant clone libraries that can be used in various molecular biology applications. Bacteriophage Mu is one of the most useful transposons due to its well-characterized and simple in vitro transposition reaction. This study establishes the properties of the Mu in vitro transposition system as a versatile multipurpose tool in molecular biology. In addition, this study describes Mu-based applications for engineering proteins by random insertional transposon mutagenesis in order to study structure-function relationships in proteins. We initially characterized the properties of the minimal Mu in vitro transposition system. We showed that the Mu transposition system works efficiently and accurately and produces insertions into a wide spectrum of target sites in different DNA molecules. Then, we developed a pentapeptide insertion mutagenesis strategy for inserting random five amino acid cassettes into proteins. These protein variants can be used especially for screening important sites for protein-protein interactions. Also, the system may produce temperature-sensitive variants of the protein of interest. Furthermore, we developed an efficient screening system for high-resolution mapping of protein-protein interfaces with the pentapeptide insertion mutagenesis. This was accomplished by combining the mutagenesis with subsequent yeast two-hybrid screening and PCR-based genetic footprinting. This combination allows the analysis of the whole mutant library en masse, without the need for producing or isolating separate mutant clones, and the protein-protein interfaces can be determined at amino acid accuracy. The system was validated by analysing the interacting region of JFC1 with Rab8A, and we show that the interaction is mediated via the JFC1 Slp homology domain. In addition, we developed a procedure for the production of nested sets of N- and C-terminal deletion variants of proteins with the Mu system. These variants are useful in many functional studies of proteins, especially in mapping regions involved in protein-protein interactions. This methodology was validated by analysing the region in yeast Mso1 involved in an interaction with Sec1. The results of this study show that the Mu in vitro transposition system is versatile for various applicational purposes and can efficiently be adapted to random protein engineering applications for functional studies of proteins.

Atomic scale engineering of carbon nanotubes

Carbon nanotubes, seamless cylinders made from carbon atoms, have outstanding characteristics: inherent nano-size, record-high Young’s modulus, high thermal stability and chemical inertness. They also have extraordinary electronic properties: in addition to extremely high conductance, they can be both metals and semiconductors without any external doping, just due to minute changes in the arrangements of atoms. As traditional silicon-based devices are reaching the level of miniaturisation where leakage currents become a problem, these properties make nanotubes a promising material for applications in nanoelectronics. However, several obstacles must be overcome for the development of nanotube-based nanoelectronics. One of them is the ability to modify locally the electronic structure of carbon nanotubes and create reliable interconnects between nanotubes and metal contacts which likely can be used for integration of the nanotubes in macroscopic electronic devices. In this thesis, the possibility of using ion and electron irradiation as a tool to introduce defects in nanotubes in a controllable manner and to achieve these goals is explored. Defects are known to modify the electronic properties of carbon nanotubes. Some defects are always present in pristine nanotubes, and naturally are introduced during irradiation. Obviously, their density can be controlled by irradiation dose. Since different types of defects have very different effects on the conductivity, knowledge of their abundance as induced by ion irradiation is central for controlling the conductivity. In this thesis, the response of single walled carbon nanotubes to ion irradiation is studied. It is shown that, indeed, by energy selective irradiation the conductance can be controlled. Not only the conductivity, but the local electronic structure of single walled carbon nanotubes can be changed by the defects. The presented studies show a variety of changes in the electronic structures of semiconducting single walled nanotubes, varying from individual new states in the band gap to changes in the band gap width. The extensive simulation results for various types of defect make it possible to unequivocally identify defects in single walled carbon nanotubes by combining electronic structure calculations and scanning tunneling spectroscopy, offering a reference data for a wide scientific community of researchers studying nanotubes with surface probe microscopy methods. In electronics applications, carbon nanotubes have to be interconnected to the macroscopic world via metal contacts. Interactions between the nanotubes and metal particles are also essential for nanotube synthesis, as single walled nanotubes are always grown from metal catalyst particles. In this thesis, both growth and creation of nanotube-metal nanoparticle interconnects driven by electron irradiation is studied. Surface curvature and the size of metal nanoparticles is demonstrated to determine the local carbon solubility in these particles. As for nanotube-metal contacts, previous experiments have proved the possibility to create junctions between carbon nanotubes and metal nanoparticles under irradiation in a transmission electron microscope. In this thesis, the microscopic mechanism of junction formation is studied by atomistic simulations carried out at various levels of sophistication. It is shown that structural defects created by the electron beam and efficient reconstruction of the nanotube atomic network, inherently related to the nanometer size and quasi-one dimensional structure of nanotubes, are the driving force for junction formation. Thus, the results of this thesis not only address practical aspects of irradiation-mediated engineering of nanosystems, but also contribute to our understanding of the behaviour of point defects in low-dimensional nanoscale materials.

The EU and Institutional Twinning in Morocco - An inquiry into the motives of cooperation through discourse ethics

This study examines Institutional Twinning in Morocco as a case of EU cooperation through the pragmatic, ethical and moral logics of reason in Jürgen Habermas’s discourse ethics. As a former accession tool, Twinning was introduced in 2004 for legal approximation in the context of the European Neighborhood Policy. Twinning is a unique instrument in development cooperation from a legal perspective. With its long historical and cultural ties to Europe, Morocco presents an interesting case study of this new form of cooperation. We will analyse motives behind the Twinning projects on illegal immigration, environment legislation and customs reform. As Twinning is a new policy instrument within the ENP context, there is relatively little preceding research, which, in itself, constitutes a reason to inquire into the subject. While introducing useful categories, the approaches discussing “normative power Europe” do not offer methodological tools precise enough to analyse the motives of the Twinning cooperation from a broad ethical standpoint. Helene Sjursen as well as Esther Barbé and Elisabeth Johansson-Nogués have elaborated on Jürgen Habermas’ discourse ethics in determining the extent of altruism in the ENP in general. Situating the analysis in the process-oriented framework of Critical Theory, discourse ethics provides the methodological framework for our research. The case studies reveal that the context in which they operate affects the pragmatic, ethical and moral aspirations of the actors. The utilitarian notion of profit maximization is quite pronounced both in terms of the number of Twinning projects in the economic sphere and the pragmatic logics of reason instrumental to security and trade-related issues. The historical background as well internal processes, however, contribute to defining areas of mutual interest to the actors as well as the motives Morocco and the EU sometimes described as the external projection of internal values. Through its different aspects, Twinning cooperation portrays the functioning of the pragmatic, ethical and moral logics of reason in international relations.

Major Events and the European Code of Police Ethics

Examines the symbolic significance of major events and their security provision in the historical and contemporary context of the European Code of Police Ethics. Stresses the potential of major events to set new practical policing and security standards of technology and in doing so necessitiate the maintenance of professional ethical standards for policing in Europe.