Rural Income Generation and Diversification : A Case Study in Eastern Zambia

Rural income diversification has been found to be rather the norm than the exception in developing countries. Smallholder households tend to diversify their income sources because of the need to manage risks, secure a smooth flow of income, allocate surplus labour, respond to various kinds of market failures, and apply coping strategies. The Agricultural Household Model provides a theoretical rationale for income diversification in that rural households aim at maximising their utility. There are several elements involved, such as agricultural production for their own consumption and markets, leisure activities and income from non-farm sources. The aim of the present study is to enhance understanding of the processes of rural income generation and diversification in eastern Zambia. Specifically, it explores the relationship between household characteristics, asset endowments and income-generation patterns. According to the sustainable- rural-livelihoods framework, the assets a household possesses shape its capacity to seize new economic opportunities. The study is based on two surveys conducted among rural smallholder households in four districts of Eastern Province in Zambia in 1985/86 and 2003. Sixty-seven of the interviewed households were present in both surveys and this panel allows comparison between the two points of time. The initial descriptive analysis is complemented with an econometric analysis of the relationships between household assets and income sources. The results show that, on average, 30 per cent of the households income originated from sources outside their own agriculture. There was a slight increase in the proportion of non-farm income from 1985/86 to 2003, but total income clearly declined mainly on account of diminishing crop income. The land area the household was able to cultivate, which is often dependent on the available labour, was the most significant factor affecting both the household-income level and the diversification patterns. Diversification was, in most cases, a coping strategy rather than a voluntary choice. Measured as income/capita/day, all households were below the poverty line in 2003. The agricultural reforms in Zambia, combined with other trends such as changes in rainfall pattern, the worsening livestock situation and the incidence of human disease, had a negative impact on agricultural productivity and income between 1985/86 and 2003. Sources of non-farm income were closely linked to agriculture either upstream or downstream and the income they generated was not enough to compensate for the decline of agricultural income. Household assets and characteristics had a smaller impact on diversification patterns than expected, which could reflect the lack of opportunities in the remote rural environment.

Käsityöläisyyden kuva kultasepän ammatissa : Käsityöläisyys Suomen Kultaseppien Liiton lehdessä 1990-luvun lopussa

The aim of this study is to survey the meaning of craftmanship in goldsmith occupation. The image of craftmanship is built theoretically as well as researcher's own practical experience. The study describes a dialogue between self-employed goldsmith s everyday work and trade union's opinion. Suomen Kultaseppien Liitto (The Goldsmith Assosiation of Finland) was chosen forthe trade union, because it is the biggest, the oldest and the most influential on the occupational area. The research data are volumes 1995 - 1998 of occupational membership journal of Suomen Kultaseppien Liitto. The data analyzed with Adapted Content Analysis and Grounded Theory. The professional occupation of goldsmiths, the role of craftmanship and the future of the occupation are discussed. Additionally, the relationship between the Suomen Kultaseppien Liitto and occupational culture and profession of goldsmiths was studied. Craft and craftmanship is most often discussed in articles related to tradition and education.Craftmanship is understood very idealistically, with little meaning in practical life. St. Eligius and the skill and art of goldsmiths in St Petersburg are raised to symbols of craftmanship. The occupational image is broken and a clear conflict between education and occupation is visible. Education produces artist-craftsmen, while handicraft workers are required in industry, and retailers or specially trained store assistant in business. Computer-aided design and manufacture render handicraft workmanship unnecessary. In a pessimistic view, the future possibilities of the goldsmith occupational profession are dim, because the artist-craftsmen are bound to lose to fast-paced machines. On the other hand, people involved in goldsmith education see the future light, designer-goldsmiths developing the occupational to new dimensions. Suomen Kultaseppien Liitto represents goldsmiths in public. The union, however is governed by non-artisan goldsmiths. The union stresses business attitudes and enterpreneurship, and has succeeded in protecting the privileges of retailers and industry. Goldsmiths profession is seen in the research data as a combination of precious-metal industry, jewellery and watch stores, anda goldsmith shop is considered a specialized giftstore. The goldsmiths occupation is not a profession, and the Suomen Kultaseppien Liitto is not a trade union for artist and craftmen. Accordingly, part of the representative authority of the union could be transferred from the Association to Taidekäsityöläiset Taiko ry, a member of organization of Ornamo. Results of this study show the importance of defining the images of the goldsmith occupational profession and the trade union. The results could be applied to goldsmith education to examine what would be the optimal education and training for present employment opportunities. The important background theories has been the theories of Habermas and Lévi-Strauss.

Water-ethanol mixtures by molecular dynamics and x-ray Compton scattering

Water-ethanol mixtures are commonly used in industry and house holds. However, quite surprisingly their molecular-level structure is still not completely understood. In particular, there is evidence that the local intermolecular geometries depend significantly on the concentration. The aim of this study was to gain information on the molecular-level structures of water-ethanol mixtures by two computational methods. The methods are classical molecular dynamics (MD), where the movement of molecules can be studied, and x-ray Compton scattering, in which the scattering cross section is sensitive to the electron momentum density. Firstly, the water-ethanol mixtures were studied with MD simulations, with the mixture concentration ranging from 0 to 100%. For the simulations well-established force fields were used for the water and ethanol molecules (TIP4P and OPLS-AA, respectively). Moreover, two models were used for ethanol, rigid and non-rigid. In the rigid model the intramolecular bond lengths are fixed, whereas in the non-rigid model the lengths are determined by harmonic potentials. Secondly, mixtures with three different concentrations employing both ethanol models were studied by calculating the experimentally observable x-ray quantity, the Compton profile. In the MD simulations a slight underestimation in the density was observed as compared to experiment. Furthermore, a positive excess of hydrogen bonding with water molecules and a negative one with ethanol was quantified. Also, the mixture was found more structured when the ethanol concentration was higher. Negligible differences in the results were found between the two ethanol models. In contrast, in the Compton scattering results a notable difference between the ethanol models was observed. For the rigid model the Compton profiles were similar for all the concentrations, but for the non-rigid model they were distinct. This leads to two possibilities of how the mixing occurs. Either the mixing is similar in all concentrations (as suggested by the rigid model) or the mixing changes for different concentrations (as suggested by the non-rigid model). Either way, this study shows that the choice of the force field is essential in the microscopic structure formation in the MD simulations. When the sources of uncertainty in the calculated Compton profiles were analyzed, it was found that more statistics needs to be collected to reduce the statistical uncertainty in the final results. The obtained Compton scattering results can be considered somewhat preliminary, but clearly indicative of the behaviour of the water-ethanol mixtures when the force field is modified. The next step is to collect more statistics and compare the results with experimental data to decide which ethanol model describes the mixture better. This way, valuable information on the microscopic structure of water-ethanol mixtures can be found. In addition, information on the force fields in the MD simulations and on the ability of the MD simulations to reproduce the microscopic structure of binary liquids is obtained.

Polymerization of Ethene and Branched α-olefins with Group IV Metal Complexes Bearing Nitrogen- and Oxygen-Based Ligands

The commodity plastics that are used in our everyday lives are based on polyolefin resins and they find wide variety of applications in several areas. Most of the production is carried out in catalyzed low pressure processes. As a consequence polymerization of ethene and α-olefins has been one of the focus areas for catalyst research both in industry and academia. Enormous amount of effort have been dedicated to fine tune the processes and to obtain better control of the polymerization and to produce tailored polymer structures The literature review of the thesis concentrates on the use of Group IV metal complexes as catalysts for polymerization of ethene and branched α-olefins. More precisely the review is focused on the use of complexes bearing [O,O] and [O,N] type ligands which have gained considerable interest. Effects of the ligand framework as well as mechanical and fluxional behaviour of the complexes are discussed. The experimental part consists mainly of development of new Group IV metal complexes bearing [O,O] and [O,N] ligands and their use as catalysts precursors in ethene polymerization. Part of the experimental work deals with usage of high-throughput techniques in tailoring properties of new polymer materials which are synthesized using Group IV complexes as catalysts. It is known that the by changing the steric and electronic properties of the ligand framework it is possible to fine tune the catalyst and to gain control over the polymerization reaction. This is why in this thesis the complex structures were designed so that the ligand frameworks could be fairly easily modified. All together 14 complexes were synthesised and used as catalysts in ethene polymerizations. It was found that the ligand framework did have an impact within the studied catalyst families. The activities of the catalysts were affected by the changes in complex structure and also effects on the produced polymers were observed: molecular weights and molecular weight distributions were depended on the used catalyst structure. Some catalysts also produced bi- or multi-modal polymers. During last decade high-throughput techniques developed in pharmaceutical industries have been adopted into polyolefin research in order to speed-up and optimize the catalyst candidates. These methods can now be regarded as established method suitable for both academia and industry alike. These high-throughput techniques were used in tailoring poly(4-methyl-1-pentene) polymers which were synthesized using Group IV metal complexes as catalysts. This work done in this thesis represents the first successful example where the high-throughput synthesis techniques are combined with high-throughput mechanical testing techniques to speed-up the discovery process for new polymer materials.

Irradiation-mediated tailoring of carbon nanotubes

The ever-increasing demand for faster computers in various areas, ranging from entertaining electronics to computational science, is pushing the semiconductor industry towards its limits on decreasing the sizes of electronic devices based on conventional materials. According to the famous law by Gordon E. Moore, a co-founder of the world s largest semiconductor company Intel, the transistor sizes should decrease to the atomic level during the next few decades to maintain the present rate of increase in the computational power. As leakage currents become a problem for traditional silicon-based devices already at sizes in the nanometer scale, an approach other than further miniaturization is needed to accomplish the needs of the future electronics. A relatively recently proposed possibility for further progress in electronics is to replace silicon with carbon, another element from the same group in the periodic table. Carbon is an especially interesting material for nanometer-sized devices because it forms naturally different nanostructures. Furthermore, some of these structures have unique properties. The most widely suggested allotrope of carbon to be used for electronics is a tubular molecule having an atomic structure resembling that of graphite. These carbon nanotubes are popular both among scientists and in industry because of a wide list of exciting properties. For example, carbon nanotubes are electronically unique and have uncommonly high strength versus mass ratio, which have resulted in a multitude of proposed applications in several fields. In fact, due to some remaining difficulties regarding large-scale production of nanotube-based electronic devices, fields other than electronics have been faster to develop profitable nanotube applications. In this thesis, the possibility of using low-energy ion irradiation to ease the route towards nanotube applications is studied through atomistic simulations on different levels of theory. Specifically, molecular dynamic simulations with analytical interaction models are used to follow the irradiation process of nanotubes to introduce different impurity atoms into these structures, in order to gain control on their electronic character. Ion irradiation is shown to be a very efficient method to replace carbon atoms with boron or nitrogen impurities in single-walled nanotubes. Furthermore, potassium irradiation of multi-walled and fullerene-filled nanotubes is demonstrated to result in small potassium clusters in the hollow parts of these structures. Molecular dynamic simulations are further used to give an example on using irradiation to improve contacts between a nanotube and a silicon substrate. Methods based on the density-functional theory are used to gain insight on the defect structures inevitably created during the irradiation. Finally, a new simulation code utilizing the kinetic Monte Carlo method is introduced to follow the time evolution of irradiation-induced defects on carbon nanotubes on macroscopic time scales. Overall, the molecular dynamic simulations presented in this thesis show that ion irradiation is a promisingmethod for tailoring the nanotube properties in a controlled manner. The calculations made with density-functional-theory based methods indicate that it is energetically favorable for even relatively large defects to transform to keep the atomic configuration as close to the pristine nanotube as possible. The kinetic Monte Carlo studies reveal that elevated temperatures during the processing enhance the self-healing of nanotubes significantly, ensuring low defect concentrations after the treatment with energetic ions. Thereby, nanotubes can retain their desired properties also after the irradiation. Throughout the thesis, atomistic simulations combining different levels of theory are demonstrated to be an important tool for determining the optimal conditions for irradiation experiments, because the atomic-scale processes at short time scales are extremely difficult to study by any other means.

Hiippakunta diakoniatyön tekijänä ja tukijana : Diakoniatyön kehitys Mikkelin hiippakunnassa 1945-1991

ABSTRACT The diocese as the agent and advocate of diaconial work. The development of diaconial work in the Mikkeli diocese 1945–1991. The roots of Finnish diacony are in the individual devotional life of Pietism. An acting faith had to be evident in acts of love. Following German institutional diacony, diaconial institutions were established in Finland until congregational diacony emerged alongside these institutions in the 1890s. Pastor Otto Aarnisalo acted as a pathfinder in this. He aimed to unite diacony with the Church and the life of the congregation. Diacony had been based on the idea of volunteering to separate it from statutory social work. In 1944 the church law was amended, which made diacony the concern of every member of the congregation. In the years immediately following the Second World War, discussion took place in the Church of Finland about the direction that diacony should take. In the consequential debate, caritative services overcame social diacony. The diocese administration moved to Mikkeli in 1945, when the majority of the Vyborg diocese became part of the USSR in the armistice negotiations. The Mikkeli diocese acted in its diaconial work with the same objectives as the diaconial solutions of the whole church. The acting principle of the diocese diacony became a form of helping which emphasised assistance of the individual. Especially from the 1960s onwards, the country's industrialisation and the reduction of agricultural trade had an effect on the Mikkeli diocese. The diocese administration, specifically Bishop Martti Simojoki and his successor Osmo Alaja, aimed to open up connections to the political left and people working in industry. At least indirectly this helped the diaconial work in industrial localities. In the Mikkeli diocese, a diaconial committee was established in 1971, and its work was overseen by the diocesan chapter of the bishop's office. This enabled the work of the diocese to be organised for the different areas of diacony. Previously, the diaconial work of the Finnish church had primarily been in nursing. The Health Insurance Law of 1972 brought a change to this when the responsibility for health services was transferred to the municipalities. Diacony began to move towards a psychological and spiritual emphasis. Beginning in the 1970s, the diocese started holding diaconial themed days at prescribed intervals. Although these did not result in great realignments, they did help clarify the direction that diacony would take. Large international collections were also carried out, especially in the 1980s. At the same time, socio-ethical activity vitalised and diversified Christian services. The idea that every member of the congregation should practice diacony was a strong factor in the Mikkeli diocese as well. The diocese's vision for diacony was holistic; Christian service was the responsibility of every member of the congregation. During the period of study (1945–1991), the theology of diacony was rather tenuous. Bishop Kalevi Toiviainen, however, brought forth the viewpoint of church doctrine and officially sanctioned theology. Diacony was part of the complete faith of the Church.