Luova mieli : lähikuvassa muusikoiden luomisprosessit

This work studied the creative process of musicians. The subject was chosen partly due to the attention given to creativity in social discussion. The approach was material-based, because during the work it became clear that the theoretical models describing the creative process in general did not provide adequate tools for the examination of musical creation. In this study, the creative process was defined as a process, which generated a work found by the musician novel to him or her. There were two principal research questions: 1) How does the creative process of musicians progress? 2) What makes a process creative? The main emphasis was on the first question, because the study aimed at modeling the creative process of musicians. The material for this study was collected by interviewing five professional musicians, each qualified by an expert of music to be creative. The interviews were thematically linked with each musician’s recently implemented creative process. The work generated in the process was used as a stimulant in the interview. The main themes of the interview dealt with the musician’s concrete action, cognitive functioning and affective experience during the process. Secondary themes included his or her goals as well as the factors that enhanced or inhibited the process. A material-based analysis was made of the interviews. The conceptualization and modelling of the creative process was founded on a phenomenological-hermeneutic interpretation. In addition to the primary interviews, also supplementary interviews were made in order to ensure that the description of the musician was understood correctly. Further supplementary interviews were made when the material was analyzed and results were deduced. This aimed at increasing the reliability of interpretations and conclusions. The study resulted in a four-level model representing the progress of a creative process. The levels were defined by means of the conception of state. The levels used in defining the process were 1) the state determining the potential of the process, 2) the state delimiting the process, 3) the state orienting the process, and 4) the state determined by the process. The progress of the process was described as changes taking place in the state. It was discovered that the factors having an effect on the creativity of the process were the dynamism of the process, the musician’s work in relation to his or her inner standard and the impulses that caused variation in the musician’s thinking. The interview method used in this study proved to be a very suitable tool in an examination of a creative process. Thus it may well be applicable in other research contexts associated with creative processes. The outcome of this study, the model of the progress of a creative process, should also provide a feasible basis for the examination of different kinds of creative processes. It enables a comprehensive examination of a creative process, simultaneously justifying the dynamic nature of the process.

Onnistuneen ikääntymisen ymmärrystä rakentamassa : Fysioterapeuttiopiskelijoiden oppiminen kestävää kehitystä edistävän kasvatuksen kehyksessä

The purpose of the present study was to investigate the possibilities and interconnec-tions that exist concerning the relationship between the University of Applied Sci-ences and the Learning by Developing action model (LbD), on the one hand, and education for sustainable development and high-quality learning as a part of profes-sional competence development on the other. The research and learning environment was the Coping at Home research project and its Caring TV project, which provided the context of the Physiotherapy for Elderly People professional study unit. The re-searcher was a teacher and an evaluator of her own students learning. The aims of the study were to monitor and evaluate learning at the individual and group level using tools of high-quality learning − improved concept maps − related to understanding the projects core concept of successful ageing. Conceptions were evaluated through aspects of sustainable development and a conceptual basis of physiotherapy. As edu-cational research this was a multi-method case study design experiment. The three research questions were as follows. 1. What kind of individual conceptions and conceptual structures do students build concerning the concept of successful ageing? How many and what kind of concepts and propositions do they have a) before the study unit, b) after the study unit, c) after the social-knowledge building? 2. What kind of social-knowledge building exists? a) What kind of social learn-ing process exists? b) What kind of socially created concepts, propositions and conceptual structures do the students possess after the project? c) What kind of meaning does the social-knowledge building have at an individual level? 3. How do physiotherapy competences develop according to the results of the first and second research questions? The subjects were 22 female, third-year Bachelor of Physiotherapy students in Laurea University of Applied Sciences in Finland. Individual learning was evaluated in 12 of the 22 students. The data was collected as a part of the learning exercises of the Physiotherapy for Elderly People study unit, with improved concept maps both at individual and group levels. The students were divided into two social-knowledge building groups: the first group had 15 members and second 7 members. Each group created a group-level concept map on the theme of successful ageing. These face-to-face interactions were recorded with CMapTools and videotaped. The data consists of both individually produced concept maps and group-produced concept maps of the two groups and the videotaped material of these processes. The data analysis was carried out at the intersection of various research traditions. Individually produced data was analysed based on content analysis. Group-produced data was analysed based on content analysis and dialogue analysis. The data was also analysed by simple statistical analysis. In the individually produced improved concept maps the students conceptions were comprehensive, and the first concept maps were found to have many concepts unrelated to each other. The conceptual structures were between spoke structures and chain structures. Only a few professional concepts were evident. In the second indi-vidual improved concept maps the conception was more professional than earlier, particulary from the functional point of view. The conceptual structures mostly re-sembled spoke structures. After the second individual concept mapping social map-ping interventions were made in the two groups. After this, multidisciplinary concrete links were established between all concepts in almost all individual concept maps, and the interconnectedness of the concepts in different subject areas was thus understood. The conceptual structures were mainly net structures. The concepts in these individual concept maps were also found to be more professional and concrete than in the previ-ous concept maps of these subjects. In addition, the wider context dependency of the concepts was recognized in many individual concept maps. This implies a conceptual framework for specialists. The social-knowledge building was similar to a social learning process. Both socio-cultural processes and cognitive processes were found to develop students conceptual awareness and the ability to engage in intentional learning. In the knowl-edge-building process two aspects were found: knowledge creation and pedagogical action. The discussion during the concept-mapping process was similar to a shared thinking process. In visualising the process with CMapTools, students easily comple-mented each others thoughts and words, as if mutually telepathic . Synthesizing, supporting, asking and answering, peer teaching and counselling, tutoring, evaluating and arguing took place, and students were very active, self-directed and creative. It took hundreds of conversations before a common understanding could be found. The use of concept mapping in particular was very effective. The concepts in these group-produced concept maps were found to be professional, and values of sustainable development were observed. The results show the importance of developing the contents and objectives of the European Qualification Framework as well as education for sustainable development, especially in terms of the need for knowledge creation, global responsibility and systemic, holistic and critical thinking in order to develop clinical practice. Keywords: education for sustainable development, learning, knowledge building, improved concept map, conceptual structure, competence, successful ageing

Holistic Spirituality in the Thinking of Ellen White

Spiritualiteetti viittaa syvälliseen, inhimilliseen ulottuvuuteen ja ominaisuuteen, jonka tarkka määritteleminen on haasteellista, ellei mahdotonta. Sitä vastaa yhtäältä uskonnollisuuden kautta toteutuva, elämän tarkoitukseen ja syvemmän olemuksen etsintään liittyvä hengellisyys, mutta toisaalta myös kaikkea muuta hengen viljelyä ja mielekkään olemisen tavoittelua tarkoittava henkisyys. John Swintonin mukaan hengen ulottuvuus on se inhimilliseen olemukseen kuuluva, dynaaminen elinvoima, joka virkistää ja elävöittää ihmistä ja motivoi häntä etsimään Jumalaa, arvoja, merkitystä, tarkoitusta ja toivoa. Tämä tutkimus nostaa tarkastelun kohteeksi kokonaisvaltaisen hengellisyyden, jolloin huomio kiinnitetään niihin sidoksiin, joiden kautta hengen ulottuvuus liittyy muihin inhimillisen elämän olennaisiin toimintoihin ja näkökulmiin. Tällaisia ovat 1) ajattelu 2) teot ja käytännön toiminta 3) suhteet ja vuorovaikutusverkostot 4) tunteet ja kanssakäymistä ohjaavat asenteet 5) olemassaolon ja olemisen ulottuvuudet. Kokemusten merkitys, arvo ja mielekkyys hahmottuvat juuri hengen alueella, toisin sanoen sisäisesti, hengellisenä ja henkisenä asiana. Tutkimusmateriaalina tässä tutkimuksessa on amerikkalaisen vuosina 1827 1915 eläneen Ellen Whiten kuusi myöhäiskauden teosta vuosilta 1892 1905 ja tutkimusmenetelmänä on käytetty systemaattista analyysiä. Olennaista Whiten tavassa käsitellä uskonnon harjoitukseen liittyviä aiheita on hänen käytännöllinen ja elämän arkeen kiinteästi niveltyvä otteensa. Tutkimus paljastaa, että Martti Lutherin käsitykset ovat merkittävästi vaikuttaneet Whiten ajatteluun. Lähteistä paljastuu samankaltaisuutta hänen näkemystensä ja uusimman suomalaisen Luther-tutkimuksen Martti Lutherin tuotannosta esiin nostaman ajattelutavan välillä. Vaikka teologisen oppineisuuden kannalta White ja Luther ovat eri tasoilla, kummankin käsitys ihmisen ja Jumalan välisen suhteen perusolemuksesta on samankaltainen: Lähtökohtana sille on Jumalan rakkaus ja hänen armostaan lähtenyt toiminta. Toiseksi, ihmisen ja Kristuksen välinen, olemuksellinen yhteys, unio , on perustana sille, että Jumala hyväksyy ihmisen ja huolehtii hänestä nyt ja ikuisesti. Kolmanneksi, tämä ihmisen ja Kristuksen liittoutuminen ja yhdistyminen ilmenee yhteistoimintana ja kumppanuutena yhteisten tavoitteiden saavuttamiseksi maailmassa. White korostaa ihmisen ja Kristuksen välisen hengellisen suhteen vuorovaikutteista ja toiminnallista luonnetta, joka tulee ilmi epäitsekkyytenä, toisten ihmisten ja heidän tarpeittensa huomioimisena sekä myötätuntona ja kykynä asettua toisen asemaan. Terveellistä elämäntapaa ja kasvatusta koskevat ajatuksensa White liittää siihen laaja-alaiseen näkemykseen hengellisyydestä, jonka tavoitteena on ihmisen kokonaisvaltainen hyvinvointi. Hän ei näe spiritualiteettia elämän arjesta irrallisena tai erillisenä saarekkeena, vaan ihmistä kaikessa ohjaavana, voimaannuttavana ja mielekkyyttä tuottavana, ensisijaisena ulottuvuutena. Tutkimuksen kuluessa myös Whiten usein käyttämät Jumalalle antautumisen ja luonteen käsitteet nousevat tarkastelun kohteiksi. Hänen mukaansa ihminen ei tahdonponnistuksillaan yksin pysty tavoittamaan Jumalaa vaan hänen on lakattava Jumalan rakastavan kutsun edessä itse tahtomasta ja suostuttava liittymään Jumalan tahtoon ja tarkoitukseen. Tämä liittyy siihen sisäiseen muutokseen, jota White kuvaa luonteen käsitteen avulla. Jumalan armon vaikuttama tahdon uudelleen suuntaaminen muuttaa ihmisen olemusta, arvoja, asennoitumisen tapaa ja myötätuntoisen vuorovaikutuksen kykyä niin ettei ihminen ole enää aivan sama kuin ennen. Kysymys on toisaalta yhtäkkisestä ja kertakaikkisesta olemuksellisesta muuttumisesta, mutta samalla myös hiljaisesta, elämänmittaisesta kasvusta ja kypsymisestä. Juuri luonteen käsitteen avulla White kuvaa hengellisyyttä ja siihen kuuluvaa sisästä matkaa. Tässä tutkimuksessa spiritualiteettia lähestytään yleisinhimillisenä piirteenä ja ominaisuutena, jolloin huomio ei ole ensisijaisesti yksittäisissä opillisissa käsityksissä tai uskonnollisuuden harjoittamisen muodoissa. Tarkoituksena on luoda kokoava rakenne, jonka puitteissa holistinen spiritualiteetti voidaan selkeämmin hahmottaa ja yksilöidymmin ymmärtää.

The Restless Love of Thinking : The Concept Liebe in Hegel's Philosophy

The German philosopher G.W.F.Hegel (1770–1831) is best known for his idealistic system philosophy, his concept of spirit [Geist] and for his dictum that the existing and the rational overlap. This thesis offers a new perspective: it examines the working of the concept ‘love’ in Hegel’s philosophy by looking at the contexts and function he puts it to, from his earliest writings to the very last lectures he gave. The starting point of the inquiry is that he applied the concept Liebe to different contexts for different purposes, but each time to provide an answer to a specific philosophical problem. His formulation, reformulation and use of ‘love’ give possible solutions to problems the solving of which was crucial to the development of his thought as a whole. The study is divided into three parts, each analysing the different problems and solutions to which Hegel applied the concept of love. The first part, "Love, morality and ethical life", examines these interconnected themes in Hegel’s early work. The main questions he addressed during this period concerned how to unite Kant’s philosophy and the Greek ideal of the good life. In this context, the concept ‘love’ did three things. First, it served to formulate his grounding idea of the relation between unity and difference, or the manifold. Secondly, it was the key to his attempt to base an ideal folk religion on Christianity interpreted as a religion of love. Finally, it provided the means to criticise Kant’s moral philosophy. The question of the moral value of love helped Hegel to break away from Kant’s thought and develop his own theory about love and ethical life. The second part of the study, "Love and the political realm", considers the way 'Liebe' functions in connection with questions concerning the community and political life in Hegel’s work. In addition to questioning the universal applicability of the concept of recognition as a key to his theory of social relations, the chapters focus on gender politics and the way he conceptualised the gender category ‘woman’ through the concept ‘love’. Another line of inquiry is the way the figure of Antigone was used to conceptualise the differentiated spheres of action for men and women, and the part ‘love’ played in Hegel’s description of Antigone’s motives. Thirdly, Hegel’s analogy of the family and the state and the way ‘love’ functions in an attempt to promote understanding of the relation between citizens and the state are examined. The third and final part of the study, "Love as absolute spirit", focuses on ‘love’ within Hegel’s systemic thought and the way he continued to characterise Geist through the language of Liebe up until and including his very last works. It is shown how Liebe functions in his hierarchical organisation of the domains of art, religion and philosophy, and how both art and religion end up in similar structural positions with regard to philosophy. One recurrent theme in the third part is Hegel’s complex relation to Romantic thought. Another line of investigation is how he reconstructed Christianity as a religion of love in his mature work. In striking contrast to his early thought, in his last works Hegel introduced a new concept of love that incorporated negativity, and that could also function as the root of political action.

Enhancing Physics Education in the National Defence University : A design based research approach in the production of learning material

This research is connected with an education development project for the four-year-long officer education program at the National Defence University. In this curriculum physics was studied in two alternative course plans namely scientific and general. Observations connected to the later one e.g. student feedback and learning outcome gave indications that action was needed to support the course. The reform work was focused on the production of aligned course related instructional material. The learning material project produced a customized textbook set for the students of the general basic physics course. The research adapts phases that are typical in Design Based Research (DBR). The research analyses the feature requirements for physics textbook aimed at a specific sector and frames supporting instructional material development, and summarizes the experiences gained in the learning material project when the selected frames have been applied. The quality of instructional material is an essential part of qualified teaching. The goal of instructional material customization is to increase the product's customer centric nature and to enhance its function as a support media for the learning process. Textbooks are still one of the core elements in physics teaching. The idea of a textbook will remain but the form and appearance may change according to the prevailing technology. The work deals with substance connected frames (demands of a physics textbook according to the PER-viewpoint, quality thinking in educational material development), frames of university pedagogy and instructional material production processes. A wide knowledge and understanding of different frames are useful in development work, if they are to be utilized to aid inspiration without limiting new reasoning and new kinds of models. Applying customization even in the frame utilization supports creative and situation aware design and diminishes the gap between theory and practice. Generally, physics teachers produce their own supplementary instructional material. Even though customization thinking is not unknown the threshold to produce an entire textbook might be high. Even though the observations here are from the general physics course at the NDU, the research gives tools also for development in other discipline related educational contexts. This research is an example of an instructional material development work together the questions it uncovers, and presents thoughts when textbook customization is rewarding. At the same time, the research aims to further creative customization thinking in instruction and development. Key words: Physics textbook, PER (Physics Education Research), Instructional quality, Customization, Creativity

From Creative Ideas to New Emerging Ventures: Entrepreneurial Processes among Finnish Design Entrepreneurs

This study focuses on self-employed industrial designers and how they emerge new venture ideas. More specifically, this study strives to determine what design entrepreneurs do when they create new venture ideas, how venture ideas are nurtured into being, and how the processes are organized to bring such ideas to the market in the given industrial context. In contemporary times when the concern for the creative class is peaking, the research and business communities need more insight of the kind that this study provides, namely how professionals may contribute to their entrepreneurial processes and other agents’ business processes. On the one hand, the interviews underlying this study suggest that design entrepreneurs may act as reactive service providers who are appointed by producers or marketing parties to generate product-related ideas on their behalf. On the other hand, the interviews suggest that proactive behaviour that aims on generating own venture ideas, may force design entrepreneurs to take considerable responsibility in organizing their entrepreneurial processes. Another option is that they strive to bring venture ideas to the market in collaboration, or by passing these to other agents’ product development processes. Design entrepreneurs’ venture ideas typically emerge from design related starting points and observations. Product developers are mainly engaged with creating their own ideas, whereas service providers refer mainly to the development of other agents’ venture ideas. In contrast with design entrepreneurs, external actors commonly emphasize customer demand as their primary source for new venture ideas, as well as development of these in close interaction with available means of production and marketing. Consequently, design entrepreneurs need to address market demand since without sales their venture ideas may as well be classified as art. In case, they want to experiment with creative ideas, then there should be another source of income to support this typically uncertain and extensive process. Currently, it appears like a lot of good venture ideas and resources are being wasted, when venture ideas do not suite available production or business procedures. Sufficient communication between design entrepreneurs and other agents would assist all parties in developing production efficient and distributable venture ideas. Overall, the findings suggest that design entrepreneurs are often involved simultaneously in several processes that aim at emerging new product related ventures. Consequently, design entrepreneurship is conceptualized in this study as a dual process. This implies that design entrepreneurs can simultaneously be in charge of their entrepreneurial processes, as they operate as resources in other agents’ business processes. The interconnection between activities and agents suggests that these kinds of processes tend to be both complex and multifaceted to their nature.

Lean Thinking in Software Development : Impacts of Kanban on Projects

The history of software development in a somewhat systematical way has been performed for half a century. Despite this time period, serious failures in software development projects still occur. The pertinent mission of software project management is to continuously achieve more and more successful projects. The application of agile software methods and more recently the integration of Lean practices contribute to this trend of continuous improvement in the software industry. One such area warranting proper empirical evidence is the operational efficiency of projects. In the field of software development, Kanban as a process management method has gained momentum recently, mostly due to its linkages to Lean thinking. However, only a few empirical studies investigate the impacts of Kanban on projects in that particular area. The aim of this doctoral thesis is to improve the understanding of how Kanban impacts on software projects. The research is carried out in the area of Lean thinking, which contains a variety of concepts including Kanban. This article-type thesis conducts a set of case studies expanded with the research strategy of quasi-controlled experiment. The data-gathering techniques of interviews, questionnaires, and different types of observations are used to study the case projects, and thereby to understand the impacts of Kanban on software development projects. The research papers of the thesis are refereed, international journal and conference publications. The results highlight new findings regarding the application of Kanban in the software context. The key findings of the thesis suggest that Kanban is applicable to software development. Despite its several benefits reported in this thesis, the empirical evidence implies that Kanban is not all-encompassing but requires additional practices to keep development projects performing appropriately. Implications for research are given, as well. In addition to these findings, the thesis contributes in the area of plan-driven software development by suggesting implications both for research and practitioners. As a conclusion, Kanban can benefit software development projects but additional practices would increase its potential for the projects.