Kirjan tie lukijalle : Kirjakauppojen vakiintuminen Suomessa 1740 - 1860

Books Paths to Readers describes the history of the origins and consolidation of modern and open book stores in Finland 1740 1860. The thesis approaches the book trade as a part of a print culture. Instead of literary studies choice to concentrate on texts and writers, book history seeks to describe the print culture of a society and how the literary activities and societies interconnect. For book historians, printed works are creations of various individuals and groups: writers, printers, editors, book sellers, censors, critics and finally, readers. They all take part in the creation, delivery and interpretation of printed works. The study reveals the ways selling and distributing books have influenced the printed works and the literary and print culture. The research period 1740 1860 covers the so-called second revolution of the book, or the modernisation of the print culture. The thesis describes the history of 60 book stores and their 96 owners. The study concentrates on three themes: firstly, how the particular book trade network became a central institution for printed works distribution, secondly what were the relations between cosmopolitan European book markets and the national cultural sphere, and thirdly how book stores functioned as cultural institutions and business enterprises. Book stores that have a varied assortment and are targeted to all readers became the main institution for book trade in Finland during 1740 1860. It happened because of three features. First, the book binders monopoly on selling bound copies in Sweden was abolished in 1740s. As a consequence entrepreneurs could concentrate solely to trade activities and offer copies from various publishers at their stores. Secondly the common business model of bartering was replaced by selling copies for cash, first in the German book trade centre Leipzig in 1770s. The change intensified book markets activities and Finnish book stores foreign connections. Thirdly, after Finland was annexed to the Russian empire in 1809, the Grand duchy s administration steered foreign book trade to book stores (because of censorship demands). Up to 1830 s book stores were available only in Helsinki and Turku. During next ten years book stores opened in six regional centres. The early entrepreneurs ran usually vertical businesses consisting of printing, publishing and distribution activities. This strategy lowered costs, eased the delivery of printed works and helped to create elaborated centres for all book activities. These book stores main clientele consisted of the Swedish speaking gentry. During late 1840s various opinion leaders called for the development of a national Finnish print culture, and also book stores. As a result, during the five years before the beginning of the Crimean war (1853 1856) book stores were opened in almost all Finnish towns: at the beginning of the war 36 book stores operated in 21 towns. The later book sellers, mainly functioning in small towns among Finnish speaking people, settled usually strictly for selling activities. Book stores received most of their revenues from selling foreign titles. Swedish, German, French and Belgian (pirate editions of popular French novels) books were widely available for the multilingual gentry. Foreign titles and copies brought in most of the revenues. Censorship inspections or unfavourable custom fees would not limit the imports. Even if the local Finnish print production steadily rose, many copies, even titles, were never delivered via book stores. Only during the 1840 s and 1850 s the most advanced publishers would concentrate on creating publishing programmes and delivering their titles via book stores. Book sellers regulated commissions were small. They got even smaller because of large amounts of unsold copies, various and usual misunderstandings of consignments and accounts or plain accidents that destroyed shipments and warehouses. Also, the cultural aim of a creating large and assortments and the tendency of short selling periods demanded professional entrepreneurship, which many small town book sellers however lacked. In the midst of troublesome business efforts, co-operation and mutual concern of the book market s entrepreneurs were the key elements of the trade, although on local level book sellers would compete, sometimes even ferociously. The difficult circumstances (new censorship decree of 1850, Crimean war) and lack of entrepreneurship, experience and customers meant that half of the book stores opened in 1845 1860 was shut in less than five years. In 1858 the few leading publishers established The Finnish Book Publishers Association. Its first task was to create new business rules and manners for the book trade. The association s activities began to professionalise the whole network, but at the same time the earlier independence of regional publishing and selling enterprises diminished greatly. The consolidation of modern and open book store network in Finland is a history of a slow and complex development without clear signs of a beginning or an end. The ideal book store model was rarely accomplished in its all features. Nevertheless, book stores became the norm of the book trade. They managed to offer larger selections, reached larger clienteles and maintained constant activity better than any other book distribution model. In essential, the book stores methods have not changed up to present times.

Characterization of New Viruses from Hypersaline Environments

Viruses of Archaea are the least studied group of viruses. Fewer than 50 archaeal viruses have been reported which constitutes less than one percent of all the isolated prokaryotic viruses. Only about one third of the isolated archaeal viruses infect halophiles. The diversity of haloviruses, virus ecology in highly saline environments and the interactions of haloviruses with their hosts have been little studied. The exiguous knowledge available on halophilic systems is not only due to inadequate sampling but also reflects the extra challenge highly saline systems set on biochemical studies. In this study six new haloviruses were isolated and characterized. Viruses included four archaeal viruses and two bacteriophages. All of the other isolates exhibited head-tail morphology, except SH1 which was the first tailless icosahedral virus isolated from a high salt environment. Production and purification procedures were set up for all of these viruses and they were subjected to stability determinations. Archaeal virus SH1 was studied in more detail. Biochemical studies revealed an internal membrane underneath the protein capsid and a linear dsDNA genome. The overall structure of SH1 resembles phages PRD1, PM2 and Bam35 as well as an archaeal virus STIV. SH1 possesses about 15 structural proteins that form complexes under non-reducing conditions. Quantitative dissociation provided information about the positions of these proteins in the virion. The life cycle of SH1 was also studied. This lytic virus infects Haloarcula hispanica. Adsorption to the host cells is fairly inefficient and the life cycle rather long. Finally, virus responses in a variety of ionic conditions were studied. It was discovered that all of the studied viruses from low salt, marine and high salt environments tolerated larger range of salinities than their bacterial or archaeal hosts. The adsorption efficiency was not determined by the natural environment of a virus. Even though viruses with the slowest binding kinetics were among the haloviruses, fast binders were observed in viruses from all environments. When the salinity was altered, the virus adsorption responses were diverse. Four different behavioral patterns were observed: virus binding increased or decreased in increasing salinity, adsorption maximum was at a particular salt concentration or the salinity did not affect the binding. The way the virus binding was affected did not correlate with the environment, virus morphology or the organism the virus infects.

Characterisation of cellulose- and lignin-based materials using x-ray scattering methods

Wood is an important material for the construction and pulping industries. Using x-ray diffraction the microfibril angle of Sitka spruce wood was studied in the first part of this thesis. Sitka spruce (Picea sitchensis [Bong.] Carr.) is native to the west coast of North America, but due to its fast growth rate, it has also been imported to Europe. So far, its nanometre scale properties have not been systematically characterised. In this thesis the microfibril angle of Sitka spruce was shown to depend significantly on the origin of the tree in the first annual rings near the pith. Wood can be further processed to separate lignin from cellulose and hemicelluloses. Solid cellulose can act as a reducer for metal ions and it is also a porous support for nanoparticles. By chemically reducing nickel or copper in the solid cellulose support it is possible to get small nanoparticles on the surfaces of the cellulose fibres. Cellulose supported metal nanoparticles can potentially be used as environmentally friendly catalysts in organic chemistry reactions. In this thesis the size of the nickel and copper containing nanoparticles were studied using anomalous small-angle x-ray scattering and wide-angle x-ray scattering. The anomalous small-angle x-ray scattering experiments showed that the crystallite size of the copper oxide nanoparticles was the same as the size of the nanoparticles, so the nanoparticles were single crystals. The nickel containing nanoparticles were amorphous, but crystallised upon heating. The size of the nanoparticles was observed to be smaller when the reduction of nickel was done in aqueous ammonium hydrate medium compared to reduction made in aqueous solution. Lignin is typically seen as the side-product of wood industries. Lignin is the second most abundant natural polymer on Earth, and it possesses potential to be a useful material for many purposes in addition to being an energy source for the pulp mills. In this thesis, the morphology of several lignins, which were produced by different separation methods from wood, was studied using small-angle and ultra small-angle x-ray scattering. It was shown that the fractal model previously proposed for the lignin structure does not apply to most of the extracted lignin types. The only lignin to which the fractal model could be applied was kraft lignin. In aqueous solutions the average shape of the low molar mass kraft lignin particles was observed to be elongated and flat. The average shape does not necessarily correspond to the shape of the individual particles because of the polydispersity of the fraction and due to selfassociation of the particles. Lignins, and especially lignosulfonate, have many uses as dispersants, binders and emulsion stabilisers. In this thesis work the selfassociation of low molar mass lignosulfonate macromolecules was observed using small-angle x-ray scattering. By taking into account the polydispersity of the studied lignosulfonate fraction, the shape of the lignosulfonate particles was determined to be flat by fitting an oblate ellipsoidal model to the scattering intensity.