Sukupuoli ja organisaatiot liikkeessä? Gender and Organisations in Flux?

Viimeaikainen sukupuolta ja organisaatiota käsittelevä tutkimus ja kirjallisuus on saanut paljon (toisinaan epäsuoria) vaikutteita feminismiä ympäröivistä keskusteluista. Lisäksi naisten aseman ja kokemuksien tunnistaminen organisaatioissa ja johtamisessa on vaikuttanut tutkimukseen. Erilaisten kansainvälisesti tutkittujen aiheiden kirjo on laaja: sukupuolisuhteet organisaatioiden ja johtoryhmien kulttuureissa ja kommunikaatiossa; sukupuolittunut työnjako; sukupuolittuneet hierarkiat, valta, auktoriteetti ja johtajuus organisaatioissa ja johtamisessa; sukupuolittuneet markkinat; sukupuolittuneet kuvat, symbolit ja mainokset; sukupuoli ja IT teknologia; seksuaalisuus, häirintä, kiusaaminen ja väkivalta organisaatioissa; työn ja kodin yhteensovittaminen; ja niin edelleen. Myös akateemiset organisaatiot sekä niiden sukupuolittuneet valtasuhteet ja johtaminen kaipaavat kipeästi huomiota. Useimpia mainituista alueista on tutkittu ainakin jonkin verran mutta paljon työtä on vielä myös jäljellä. Tämä kokoelma esittelee ajankohtaista suomalaista tutkimusta seuraavista teemoista: tasa-arvo organisaatioissa, naisjohtajuus, yrittäjyyden sukupuoli, verkostot, sukupuolen representaatio sekä sukupuoli ja uusi teknologia. Kokoelma on työryhmän yhdessä koostama joten se on ennen kaikkea yhteistyön tulos. Recent research and literature on the gendering of organisations has been strongly influenced, though sometimes indirectly, by debates in and around feminism, and on recognising women and women’s situations, experiences and voices in organisations and management. The range of topics and issues that have been studied internationally is vast: gender relations in organizational and management groups, cultures and communication; gender divisions of labour; gender divisions of hierarchy, power, authority and leadership in organizations and management; gendered markets; gender imagery, symbols and advertising; gender and information technology; sexuality, harassment, bullying and violence in organisations; home-work relations; and so on. There are also key issues of gender power relations in academic organizations and management themselves, which need urgent attention. Though most of these areas have been researched to some extent, much remains to be done. This collection brings together current Finnish research on: Equality in Organisations, Women in Management, Gender and Entrepreneurship, Networks, Representation of Gender, Gender and ICTs. The book has been put together by an editorial team and is thus first and foremost a collective effort.

Appropriate Institutions and Economic Growth - one size fits no-one

Modern-day economics is increasingly biased towards believing that institutions matter for growth, an argument that has been further enforced by the recent economic crisis. There is also a wide consensus on what these growth-promoting institutions should look like, and countries are periodically ranked depending on how their institutional structure compares with the best-practice institutions, mostly in place in the developing world. In this paper, it is argued that ”non-desirable” or “second-best” institutions can be beneficial for fostering investment and thus providing a starting point for sustained growth, and that what matters is the appropriateness of institutions to the economy’s distance to the frontier or current phase of development. Anecdotal evidence from Japan and South-Korea is used as a motivation for studying the subject and a model is presented to describe this phenomenon. In the model, the rigidity or non-rigidity of the institutions is described by entrepreneurial selection. It is assumed that entrepreneurs are the ones taking part in the imitation and innovation of technologies, and that decisions on whether or not their projects are refinanced comes from capitalists. The capitalists in turn have no entrepreneurial skills and act merely as financers of projects. The model has two periods, and two kinds of entrepreneurs: those with high skills and those with low skills. The society’s choice of whether an imitation or innovation – based strategy is chosen is modeled as the trade-off between refinancing a low-skill entrepreneur or investing in the selection of the entrepreneurs resulting in a larger fraction of high-skill entrepreneurs with the ability to innovate but less total investment. Finally, a real-world example from India is presented as an initial attempt to test the theory. The data from the example is not included in this paper. It is noted that the model may be lacking explanatory power due to difficulties in testing the predictions, but that this should not be seen as a reason to disregard the theory – the solution might lie in developing better tools, not better just better theories. The conclusion presented is that institutions do matter. There is no one-size-fits-all-solution when it comes to institutional arrangements in different countries, and developing countries should be given space to develop their own institutional structures that cater to their specific needs.

Functional Surfaces for Microfluidics in Proteomic Analysis

Microchips for use in biomolecular analysis show a lot of promise for medical diagnostics and biomedical basic research. Among the potential advantages are more sensitive and faster analyses as well as reduced cost and sample consumption. Due to scaling laws, the surface are to volume ratios of microfluidic chips is very high. Because of this, tailoring the surface properties and surface functionalization are very important technical issues for microchip development. This thesis studies two different types of functional surfaces, surfaces for open surface capillary microfluidics and surfaces for surface assisted laser desorption ionization mass spectrometry, and combinations thereof. Open surface capillary microfluidics can be used to transport and control liquid samples on easily accessible open surfaces simply based on surface forces, without any connections to pumps or electrical power sources. Capillary filling of open partially wetting grooves is shown to be possible with certain geometries, aspect ratios and contact angles, and a theoretical model is developed to identify complete channel filling domains, as well as partial filling domains. On the other hand, partially wetting surfaces with triangular microstructures can be used for achieving directional wetting, where the water droplets do not spread isotropically, but instead only spread to a predetermined sector. Furthermore, by patterning completely wetting and superhydrophobic areas on the same surface, complex droplet shapes are achieved, as the water stretches to make contact with the wetting surface, but does not enter into the superhydrophobic domains. Surfaces for surface assisted laser desorption ionization mass spectrometry are developed by applying various active thin film coatings on multiple substrates, in order to separate surface and bulk effects. Clear differences are observed between both surface and substrate layers. The best performance surfaces consisted of amorphous silicon coating and an inorganic-organic hybrid substrate, with nanopillars and nanopores. These surfaces are used for matrix-free ionization of drugs, peptides and proteins, and for some analytes, the detection limits were in the high attomoles. Microfluidics and laser desorption ionization surfaces are combined on a functionalized drying platforms, where the surface is used to control the shape of the deposited analyte droplet, and the shape of the initial analyte droplet affects the dried droplet solute deposition pattern. The deposited droplets can then directly detected by mass spectrometry. Utilizing this approach, results of analyte concentration, splitting and separation are demonstrated.

Hila- ja kuviotason laskennan vaikutus kuvion kokonaistilavuuteen, tallennustilaan ja laskentaaikaan teoreettista läpimittajakaumaa ja runkolukusarjaa käyttämällä

Metsäsuunnittelussa tarvittavan metsävaratiedon keräämisessä ollaan Suomessa siirtymässä kuvioittaisesta arvioinnista laserkeilaus- ja ilmakuvapohjaiseen kaukokartoitukseen. Tämän tutkimuksen tarkoitus oli selvittää kuvion kokonaistilavuuden ja läpimittajakauman ennustamisen tarkkuus koealan metsikkö- ja puustotunnuksista MSN-, PRM-, ML- ja FMM-menetelmiä sekä Weibull-jakaumaa hyödyntäen seuraavilla tavoilla: 1. PRM-menetelmällä hilatasolla, 2. PRMmenetelmällä kuviotasolla, 3. ML-menetelmällä hilatasolla ja 4. ML-menetelmällä kuviotasolla. Lisäksi kuvion kokonaistilavuuden ennustamisen tarkkuus selvitettiin hyödyntäen kuviolle tuotettua runkolukusarjaa. Tulokset laskettiin puulajikohtaisesti männylle, kuuselle, koivulle ja muille puulajeille. Puulajien tulokset laskettiin kuviotasolla yhteen. Lisäksi selvitettiin menetelmien laskenta-ajan ja tallennustilan tarve. Tutkimuksen aineistona käytettiin Hämeen ammattikorkeakoulun Evon toimipisteen metsistä mitattuja kiinteäsäteisiä ympyräkoealoja, joita oli 249 kappaletta. Hakkuukoneella mitattiin 12kuvion, joiden pinta-alat vaihtelivat välillä 0,2 – 1,94 hehtaaria, puustotiedot. Aluepohjaisen laserkeilausaineiston pulssin tiheys oli 1,8/m2 ja ilmakuvien pikselikoko 0,5 metriä. Kuvion kokonaistilavuus ennustettiin tai estimoitiin laserkeilaus- ja ilmakuva-aineiston piirteiden avulla koealojen puustotunnuksista. Tulokset laskettiin erikseen kaikille kuvioille ja kuvioille, joiden pinta-ala oli yli 0,5 hehtaaria. Yli 0,5 hehtaarin kuvioita oli 8 kappaletta. Kuvion hilojen naapureina käytettiin 1 - 10 koealaa. Menetelmästä ja naapurien määrästä riippuen kokonaistilavuuden suhteellinen RMSE ja harha vaihtelivat välillä 20,76 – 52,86 prosenttia ja -12,04 – 46,54 prosenttia. Vastaavat luvut yli 0,5 hehtaarin kuvioilla olivat 6,74 – 59,41 prosenttia ja -8,04 – 49,59 prosenttia. Laskenta-aika vaihteli menetelmien ja käytettyjen naapurien määrän mukaan voimakkaasti. Kehittyneemmällä ohjelmoinnilla ja ohjelmistolla laskenta-ajat voivat laskea merkittävästi. Tallennustila ei testatuilla menetelmillä ole rajoittava tekijä laajassakaan mittakaavassa. Läpimittajakauman perusteella PRM-menetelmä ennustaa puulajille erittäin kapean läpimittajakauman, jos koeala koostuu vain muutamasta lähes samankokoisesta puusta. Tämä vaikutti tuloksiin erityisesti menetelmällä PRM2.

Lahopuumäärän ennustaminen ja kartoitus lentokonelaserkeilauksen avulla

Lahopuun määrästä ja sijoittumisesta ollaan kiinnostuneita paitsi elinympäristöjen monimuotoisuuden, myös ilmakehän hiilen varastoinnin kannalta. Tutkimuksen tavoitteena oli kehittää aluepohjainen laserkeilausdataa hyödyntävä malli lahopuukohteiden paikantamiseksi ja lahopuun määrän estimoimiseksi. Samalla tutkittiin mallin selityskyvyn muuttumista mallinnettavan ruudun kokoa suurennettaessa. Tutkimusalue sijaitsi Itä-Suomessa Sonkajärvellä ja koostui pääasiassa nuorista hoidetuista talousmetsistä. Tutkimuksessa käytettiin harvapulssista laserkeilausdataa sekä kaistoittain mitattua maastodataa kuolleesta puuaineksesta. Aineisto jaettiin siten, että neljäsosa datasta oli käytössä mallinnusta varten ja loput varattiin valmiiden mallien testaamiseen. Lahopuun mallintamisessa käytettiin sekä parametrista että ei-parametrista mallinnusmenetelmää. Logistisen regression avulla erikokoisille (0,04, 0,20, 0,32, 0,52 ja 1,00 ha) ruuduille ennustettiin todennäköisyys lahopuun esiintymiselle. Muodostettujen mallien selittävät muuttujat valittiin 80 laserpiirteen ja näiden muunnoksien joukosta. Mallien selittävät muuttujat valittiin kolmessa vaiheessa. Aluksi muuttujia tarkasteltiin visuaalisesti kuvaamalla ne lahopuumäärän suhteen. Ensimmäisessä vaiheessa sopivimmiksi arvioitujen muuttujien selityskykyä testattiin mallinnuksen toisessa vaiheessa yhden muuttujan mallien avulla. Lopullisessa usean muuttujan mallissa selittävien muuttujien kriteerinä oli tilastollinen merkitsevyys 5 % riskitasolla. 0,20 hehtaarin ruutukoolle luotu malli parametrisoitiin muun kokoisille ruuduille. Logistisella regressiolla toteutetun parametrisen mallintamisen lisäksi, 0,04 ja 1,0 hehtaarin ruutukokojen aineistot luokiteltiin ei-parametrisen CART-mallinnuksen (Classification and Regression Trees) avulla. CARTmenetelmällä etsittiin aineistosta vaikeasti havaittavia epälineaarisia riippuvuuksia laserpiirteiden ja lahopuumäärän välillä. CART-luokittelu tehtiin sekä lahopuustoisuuden että lahopuutilavuuden suhteen. CART-luokituksella päästiin logistista regressiota parempiin tuloksiin ruutujen luokituksessa lahopuustoisuuden suhteen. Logistisella mallilla tehty luokitus parani ruutukoon suurentuessa 0,04 ha:sta(kappa 0,19) 0,32 ha:iin asti (kappa 0,38). 0,52 ha:n ruutukoolla luokituksen kappa-arvo kääntyi laskuun (kappa 0,32) ja laski edelleen hehtaarin ruutukokoon saakka (kappa 0,26). CART-luokitus parani ruutukoon kasvaessa. Luokitustulokset olivat logistista mallinnusta parempia sekä 0,04 ha:n (kappa 0,24) että 1,0 ha:n (kappa 0,52) ruutukoolla. CART-malleilla määritettyjen ruutukohtaisten lahopuutilavuuksien suhteellinen RMSE pieneni ruutukoon kasvaessa. 0,04 hehtaarin ruutukoolla koko aineiston lahopuumäärän suhteellinen RMSE oli 197,1 %, kun hehtaarin ruutukoolla vastaava luku oli 120,3 %. Tämän tutkimuksen tulosten perusteella voidaan todeta, että maastossa mitatun lahopuumäärän ja tutkimuksessa käytettyjen laserpiirteiden yhteys on pienellä ruutukoolla hyvin heikko, mutta vahvistuu hieman ruutukoon kasvaessa. Kun mallinnuksessa käytetty ruutukoko kasvaa, pienialaisten lahopuukeskittymien havaitseminen kuitenkin vaikeutuu. Tutkimuksessa kohteen lahopuustoisuus pystyttiin kartoittamaan kohtuullisesti suurella ruutukoolla, mutta pienialaisten kohteiden kartoittaminen ei onnistunut käytetyillä menetelmillä. Pienialaisten kohteiden paikantaminen laserkeilauksen avulla edellyttää jatkotutkimusta erityisesti tiheäpulssisen laserdatan käytöstä lahopuuinventoinneissa.

Jauheiden erottuminen

Partikkelisysteemien segregaatio eli erottuminen on ilmiö, jossa tasalaatuisen jauheseoksen komponenteilla on taipumus erota toisistaan. Jauheen erottumistaipumus riippuu partikkelien ominaisuuksista, ympäröivistä olosuhteista ja partikkelien välisistä vuorovaikutuksista. Segregaatiomekanismeja on esitetty kirjallisuudessa valtava määrä ja pienetkin erot partikkelien välisissä ominaisuuksissa ja vuorovaikutuksissa voivat johtaa täysin eri segregaatiomekanismeihin. Segregaatioilmiö on lääketeollisuuden näkökulmasta hyvin keskeinen, eikä sitä tunneta vielä riittävän hyvin, jotta siltä osattaisiin systemaattisesti välttyä. Nykyinen segregaatiotutkimus perustuu suurelta osin yrityksen ja erehdyksen kautta tapahtuvaan oppimiseen. Todellisen segregaatioilmiön ymmärtämiseen tarvittaisiin innovatiivisia tutkimusmenetelmiä. Kokeellisen osan tarkoituksena oli kehittää ja perustestata menetelmä, jolla voidaan tutkia erilaisten partikkelisysteemien erottumiskäyttäytymistä, ja käyttää tätä menetelmää farmaseuttisten rae- ja pellettiseosten segregaation tutkimiseen. Tavoitteena oli todistaa kehitetyn Babel-laitteen toimintaperiaatteen soveltuvuus partikkelisysteemien erottumiskäyttäytymisen tutkimiseen, mutta suoritetut kokeet olivat lähinnä menetelmän ja laitteen testausta. Ongelmiksi muodostuivat Babel-laitteen asettamat rajoitukset, partikkelien sähköistyminen ja partikkelien väliset vuorovaikutukset. Käytetyt suoraviivaiset lähestymistavat eivät riittäneet segregaation aiheuttamiseen Babel-laitteella. Vertikaalisen ravistelun seurauksena syntynyt konvektiopyörre esti segregaation syntymisen. Johtopäätöksenä voidaan sanoa, että Babel-laite mittaa hyvin ja toistettavasti sekä se kykenee erottamaan erikokoiset partikkelit ja erilaiset kokojakaumat toisistaan. Laitteen kehittämistavoitteena olisi saada segregaatio paremmin näkyviin jauheseoksissa ravistelun seurauksena. Tällöin voitaisiin tehdä päätelmiä jauheseoksen erottumistaipumuksesta ja systeemissä vallitsevista erottumismekanismeista. Laitteen ja menetelmän jatkokehittäminen voisi tuottaa hyödyllistä lisätietoa, mikä edesauttaisi segregaation ymmärtämistä ilmiönä entistä paremmin

Polymeereillä stabiloitu amorfinen formulaatio

Nowadays growing number of new active pharmaceutical ingredients (API) have large molecular weight and are hydrophobic. The energy of their crystal lattice is bigger and polarity has decreased. This leads to weakened solubility and dissolution rate of the drug. These properties can be enhanced for example by amorphization. Amorphous form has the best dissolution rate in the solid state. In the amorphous form drug molecules are randomly arranged, so the energy required to dissolve molecules is lower compared to the crystalline counterpart. The disadvantage of amorphous form is that it is unstable. Amorphous form tends to crystallize. Stability of amorphous form can be enhanced by adding an adjuvant to drug product. Adjuvant is usually a polymer. Polymers prevent crystallization both by forming bonds with API molecules and by steric hindrance. The key thing in stabilizing amorphous form is good miscibility between API and polymer. They have to be mixed in a molecular level so that the polymer is able to prevent crystallization. The aim of this work was to study miscibility of drug and polymer and stability of their dispersion with different analytical methods. Amorphous dispersions were made by rotary evaporator and freeze dryer. Amorphicity was confirmed with X-ray powder diffraction (XRPD) right after preparation. Itraconazole and theophylline were the chosen molecules to be stabilized. Itraconazole was expected to be easier and theophylline more difficult to stabilize. Itraconazole was stabilized with HPMC and theophylline was stabilized with PVP. Miscibility was studied with XRPD and differential scanning calorimetry (DSC). In addition it was studied with polarized light microscope if miscibility was possible to see visually. Dispersions were kept in stressed conditions and the crystallization was analyzed with XRPD. Stability was also examined with isothermal microcalorimetry (IMC). The dispersion of itraconazole and theophylline 40/60 (w/w) was completely miscible. It was proved by linear combination of XRPD results and single glass transition temperature in DSC. Homogenic well mixed film was observed with light microscope. Phase separation was observed with other compositions. Dispersions of theophylline and PVP mixed only partly. Stability of itraconazole dispersions were better than theophylline dispersions which were mixed poorer. So miscibility was important thing considering stability. The results from isothermal microcalorimetry were similar to results from conventional stability studies. Complementary analytical methods should be used when studying miscibility so that the results are more reliable. Light microscope is one method in addition to mostly used XRPD and DSC. Analyzing light microscope photos is quite subjective but it gives an idea of miscibility. Isothermal microcalorimetry can be one option for conventional stability studies. If right conditions can be made where the crystallization is not too fast, it may be possible to predict stability with isothermal microcalorimetry.

Effect of water vapour stabilization of raw materials on the quality of the inhalation product

Generation of raw materials for dry powder inhalers by different size reduction methods can be expected to influence physical and chemical properties of the powders. This can cause differences in particle size, size distribution, shape, crystalline properties, surface texture and energy. These physical properties of powders influence the behaviour of particles before and after inhalation. Materials with an amorphous surface have different surface energy compared to materials with crystalline surface. This can affect the adhesion and cohesion of particles. Changes in the surface nature of the drug particles results in a change in product performance. By stabilization of the raw materials the amorphous surfaces are converted into crystalline surfaces. The primary aim of the study was to investigate the influence of the surface properties of the inhalation particles on the quality of the product. The quality of the inhalation product is evaluated by measuring the fine particle dose (FPD). FDP is the total dose of particles with aerodynamic diameters smaller than 5,0 μm. The secondary aim of this study was to achieve the target level of the FPD and the stability of the FPD. This study was also used to evaluate the importance of the stabilization of the inhalation powders. The study included manufacturing and analysing drug substance 200 μg/dose inhalation powder batches using non-stabilized or stabilized raw materials. The inhaler formulation consisted of micronized drug substance, lactose <100μm and micronized lactose <10μm. The inhaler device was Easyhaler®. Stabilization of the raw materials was done in different relative humidity, temperature and time. Surface properties of the raw materials were studied by dynamic vapour sorption, scanning electron microscopy and three-point nitrogen adsorption technique. Particle size was studied by laser diffraction particle size analyzer. Aerodynamic particle size distribution from inhalers was measured by new generation impactor. Stabilization of all three raw materials was successful. A clear difference between nonstabilized and stabilized raw materials was achieved for drug substance and lactose <10μm. However for lactose <100μm the difference wasn’t as clear as wanted. The surface of the non-stabilized drug substance was more irregular and the particles had more roughness on the surface compared to the stabilized drug substances particles surface. The surface of the stabilized drug particles was more regular and smoother than non-stabilized. Even though a good difference between stabilized and non-stabilized raw materials was achieved, a clear evidence of the effect of the surface properties of the inhalation particles on the quality of the product was not observed. Stabilization of the raw materials didn’t lead to a higher FPD. Possible explanations for the unexpected result might be too rough conditions in the stabilization of the drug substance or smaller than wanted difference in the degree of stabilization of the main component of the product <100μm. Despite positive effects on the quality of the product were not seen there appears to be some evidence that stabilized drug substance results in smaller particle size of dry powder inhalers.

Detection, epidemiology and host spectrum of cowpox and Borna disease virus infections

Several orthopoxviruses (OPV) and Borna disease virus (BDV) are enveloped, zoonotic viruses with a wide geographical distribution. OPV antibodies cross-react, and former smallpox vaccination has therefore protected human populations from another OPV infection, rodent-borne cowpox virus (CPXV). Cowpox in humans and cats usually manifests as a mild, self-limiting dermatitis and constitutional symptoms, but it can be severe and even life-threatening in the immunocompromised. Classical Borna disease is a progressive meningoencephalomyelitis in horses and sheep known in central Europe for centuries. Nowadays the virus or its close relative infects humans and also several other species in central Europe and elsewhere, but the existence of human Borna disease with its suspected neuropsychiatric symptoms is controversial. The epidemiology of BDV is largely unknown, and the present situation is even more intriguing following the recent detection of several-million-year-old, endogenized BDV genes in primate and various other vertebrate genomes. The aims of this study were to elucidate the importance of CPXV and BDV in Finland and in possible host species, and particularly to 1) establish relevant methods for the detection of CPXV and other OPVs as well as BDV in Finland, 2) determine whether CPXV and BDV exist in Finland, 3) discover how common OPV immunity is in different age groups in Finland, 4) characterize possible disease cases and clarify their epidemiological context, 5) establish the hosts and possible reservoir species of these viruses and their geographical distribution in wild rodents, and 6) elucidate the infection kinetics of BDV in the bank vole. An indirect immunofluorescence assay and avidity measurement were established for the detection, timing and verification of OPV or BDV antibodies in thousands of blood samples from humans, horses, ruminants, lynxes, gallinaceous birds, dogs, cats and rodents. The mostly vaccine-derived OPV seroprevalence was found to decrease gradually according to the year of birth of the sampled human subjects from 100% to 10% in those born after 1977. On the other hand, OPV antibodies indicating natural contact with CPXV or other OPVs were commonly found in domestic and wild animals: the horse, cow, lynx, dog, cat and, with a prevalence occasionally even as high as 92%, in wild rodents, including some previously undetected species and new regions. Antibodies to BDV were detected in humans, horses, a dog, cats, and for the first time in wild rodents, such as bank voles (Myodes glareolus). Because of the controversy within the human Borna disease field, extra verification methods were established for BDV antibody findings: recombinant nucleocapsid and phosphoproteins were produced in Escherichia coli and in a baculovirus system, and peptide arrays were additionally applied. With these verification assays, Finnish human, equine, feline and rodent BDV infections were confirmed. Taken together, wide host spectra were evident for both OPV and BDV infections based on the antibody findings, and OPV infections were found to be geographically broadly distributed. PCR amplification methods were utilised for hundreds of blood and tissue samples. The methods included conventional, nested and real-time PCRs with or without the reverse transcription step and detecting four or two genes of OPVs and BDV, respectively. OPV DNA could be amplified from two human patients and three bank voles, whereas no BDV RNA was detected in naturally infected individuals. Based on the phylogenetic analyses, the Finnish OPV sequences were closely related although not identical to a Russian CPXV isolate, and clearly different from other CPXV strains. Moreover, the Finnish sequences only equalled each other, but the short amplicons obtained from German rodents were identical to monkeypox virus, in addition to German CPXV variants. This reflects the close relationship of all OPVs. In summary, RNA of the Finnish BDV variant could not be detected with the available PCR methods, but OPV DNA infrequently could. The OPV species infecting the patients of this study was proven to be CPXV, which is most probably also responsible for the rodent infections. Multiple cell lines and some newborn rodents were utilised in the isolation of CPXV and BDV from patient and wildlife samples. CPXV could be isolated from a child with severe, generalised cowpox. BDV isolation attempts from rodents were unsuccessful in this study. However, in parallel studies, a transient BDV infection of cells inoculated with equine brain material was detected, and BDV antigens discovered in archival animal brains using established immunohistology. Thus, based on several independent methods, both CPXV and BDV (or a closely related agent) were shown to be present in Finland. Bank voles could be productively infected with BDV. This experimental infection did not result in notable pathological findings or symptoms, despite the intense spread of the virus in the central and peripheral nervous system. Infected voles commonly excreted the virus in urine and faeces, which emphasises their possible role as a BDV reservoir. Moreover, BDV RNA was regularly reverse transcribed into DNA in bank voles, which was detected by amplifying DNA by PCR without reverse transcription, and verified with nuclease treatments. This finding indicates that BDV genes could be endogenized during an acute infection. Although further transmission studies are needed, this experimental infection demonstrated that the bank vole can function as a potential BDV reservoir. In summary, multiple methods were established and applied in large panels to detect two zoonoses novel to Finland: cowpox virus and Borna disease virus. Moreover, new information was obtained on their geographical distribution, host spectrum, epidemiology and infection kinetics.

Solubility and physical stability improvement of natiral xanthine derivatives

Use of natural xanthine derivates in medicine is complicated with their physical properties. Theobromine is poorly soluble while theophylline is highly sensitive to hydration. The aim of this study was to improve bioavailability of xanthines by co-crystallization, theophylline was also cocrystallized with carboxylic acids (capric, citric, glutaric, malenic, malonic, oxalic, stearic, succinic) and HPMC. Co-crystallization was performed by slow evaporation and ball milling. Physical stability was checked by wet granulation and water sorption methods, solubility was measured by intrinsic tablet dissolution. Theobromine formed co-crystal with other xanthines and theophylline interacted with all acids except stearic and HPMC, the latter showed alternative interactions based on hydrogen bonding. Hydration resistance was good in theophylline:succinic acid co-crystal and excellent in complexes containing capric, stearic acids and HPMC. Theophylline:HPMC showed improved solubility. The reported approach can promote use of xanthines and can be recommended for other compounds with similar problems.

Effect of GPS on understanding relationship between mobile map and environment : A field experiment

Objectives: GPS technology enables the visualisation of a map reader s location on a mobile map. Earlier research on the cognitive aspects of map reading identified that searching for map-environment points is an essential element for the process of determining one s location on a mobile map. Map-environment points refer to objects that are visualized on the map and are recognizable in the environment. However, because the GPS usually adds only one point to the map that has a relation to the environment, it does not provide a sufficient amount of information for self-location. The aim of the present thesis was to assess the effect of GPS on the cognitive processes involved in determining one s location on a map. Methods: The effect of GPS on self-location was studied in a field experiment. The subjects were shown a target on a mobile map, and they were asked to point in the direction of the target. In order for the map reader to be able to deduce the direction of the target, he/she has to locate himself/herself on the map. During the pointing tasks, the subjects were asked to think aloud. The data from the experiment were used to analyze the effect of the GPS on the time needed to perform the task. The subjects verbal data was used to assess the effect of the GPS on the number of landmark concepts mentioned during a task (landmark concepts are words referring to objects that can be recognized both on the map and in the environment). Results and conclusions: The results from the experiment indicate that the GPS reduces the time needed to locate oneself on a map. The analysis of the verbal data revealed that the GPS reduces the number of landmark concepts in the protocols. The findings suggest that the GPS guides the subject s search for the map-environment points and narrows the area on the map that must be searched for self-location.

Towards Understanding Powder Behavior Via Simulation

The aim of this study was to investigate powder and tablet behavior at the level of mechanical interactions between single particles. Various aspects of powder packing, mixing, compression, and bond formation were examined with the aid of computer simulations. The packing and mixing simulations were based on spring forces interacting between particles. Packing and breakage simulations included systems in which permanent bonds were formed and broken between particles, based on their interaction strengths. During the process, a new simulation environment based on Newtonian mechanics and elementary interactions between the particles was created, and a new method for evaluating mixing was developed. Powder behavior is a complicated process, and many of its aspects are still unclear. Powders as a whole exhibit some aspects of solids and others of liquids. Therefore, their physics is far from clear. However, using relatively simple models based on particle-particle interaction, many powder properties could be replicated during this work. Simulated packing densities were similar to values reported in the literature. The method developed for describing powder mixing correlated well with previous methods. The new method can be applied to determine mixing in completely homogeneous materials, without dividing them into different components. As such, it can describe the efficiency of the mixing method, regardless of the powder's initial setup. The mixing efficiency at different vibrations was examined, and we found that certain combinations of amplitude, direction, and frequencies resulted in better mixing while using less energy. Simulations using exponential force potentials between particles were able to explain the elementary compression behavior of tablets, and create force distributions that were similar to the pressure distributions reported in the literature. Tablet-breaking simulations resulted in breaking strengths that were similar to measured tablet breaking strengths. In general, many aspects of powder behavior can be explained with mechanical interactions at the particle level, and single particle properties can be reliably linked to powder behavior with accurate simulations.

Mesoporous silica- and silicon-based materials as carriers for poorly water soluble drugs

New chemical entities with unfavorable water solubility properties are continuously emerging in drug discovery. Without pharmaceutical manipulations inefficient concentrations of these drugs in the systemic circulation are probable. Typically, in order to be absorbed from the gastrointestinal tract, the drug has to be dissolved. Several methods have been developed to improve the dissolution of poorly soluble drugs. In this study, the applicability of different types of mesoporous (pore diameters between 2 and 50 nm) silicon- and silica-based materials as pharmaceutical carriers for poorly water soluble drugs was evaluated. Thermally oxidized and carbonized mesoporous silicon materials, ordered mesoporous silicas MCM-41 and SBA-15, and non-treated mesoporous silicon and silica gel were assessed in the experiments. The characteristic properties of these materials are the narrow pore diameters and the large surface areas up to over 900 m²/g. Loading of poorly water soluble drugs into these pores restricts their crystallization, and thus, improves drug dissolution from the materials as compared to the bulk drug molecules. In addition, the wide surface area provides possibilities for interactions between the loaded substance and the carrier particle, allowing the stabilization of the system. Ibuprofen, indomethacin and furosemide were selected as poorly soluble model drugs in this study. Their solubilities are strongly pH-dependent and the poorest (< 100 µg/ml) at low pH values. The pharmaceutical performance of the studied materials was evaluated by several methods. In this work, drug loading was performed successfully using rotavapor and fluid bed equipment in a larger scale and in a more efficient manner than with the commonly used immersion methods. It was shown that several carrier particle properties, in particular the pore diameter, affect the loading efficiency (typically ~25-40 w-%) and the release rate of the drug from the mesoporous carriers. A wide pore diameter provided easier loading and faster release of the drug. The ordering and length of the pores also affected the efficiency of the drug diffusion. However, these properties can also compensate the effects of each other. The surface treatment of porous silicon was important in stabilizing the system, as the non-treated mesoporous silicon was easily oxidized at room temperature. Different surface chemical treatments changed the hydrophilicity of the porous silicon materials and also the potential interactions between the loaded drug and the particle, which further affected the drug release properties. In all of the studies, it was demonstrated that loading into mesoporous silicon and silica materials improved the dissolution of the poorly soluble drugs as compared to the corresponding bulk compounds (e.g. after 30 min ~2-7 times more drug was dissolved depending on the materials). The release profile of the loaded substances remained similar also after 3 months of storage at 30°C/56% RH. The thermally carbonized mesoporous silicon did not compromise the Caco-2 monolayer integrity in the permeation studies and improved drug permeability was observed. The loaded mesoporous silica materials were also successfully compressed into tablets without compromising their characteristic structural and drug releasing properties. The results of this research indicated that mesoporous silicon/silica-based materials are promising materials to improve the dissolution of poorly water soluble drugs. Their feasibility in pharmaceutical laboratory scale processes was also confirmed in this thesis.

Interfacial Phenomena in Pharmaceutical Low Moisture Content Powder Processing

Powders are essential materials in the pharmaceutical industry, being involved in majority of all drug manufacturing. Powder flow and particle size are central particle properties addressed by means of particle engineering. The aim of the thesis was to gain knowledge on powder processing with restricted liquid addition, with a primary focus on particle coating and early granule growth. Furthermore, characterisation of this kind of processes was performed. A thin coating layer of hydroxypropyl methylcellulose was applied on individual particles of ibuprofen in a fluidised bed top-spray process. The polymeric coating improved the flow properties of the powder. The improvement was strongly related to relative humidity, which can be seen as an indicator of a change in surface hydrophilicity caused by the coating. The ibuprofen used in the present study had a d50 of 40 μm and thus belongs to the Geldart group C powders, which can be considered as challenging materials in top-spray coating processes. Ibuprofen was similarly coated using a novel ultrasound-assisted coating method. The results were in line with those obtained from powders coated in the fluidised bed process mentioned above. It was found that the ultrasound-assisted method was capable of coating single particles with a simple and robust setup. Granule growth in a fluidised bed process was inhibited by feeding the liquid in pulses. The results showed that the length of the pulsing cycles is of importance, and can be used to adjust granule growth. Moreover, pulsed liquid feed was found to be of greater significance to granule growth in high inlet air relative humidity. Liquid feed pulsing can thus be used as a tool in particle size targeting in fluidised bed processes and in compensating for changes in relative humidity of the inlet air. The nozzle function of a two-fluid external mixing pneumatic nozzle, typical for small scale pharmaceutical fluidised bed processes, was studied in situ in an ongoing fluidised bed process with particle tracking velocimetry. It was found that the liquid droplets undergo coalescence as they proceed away from the nozzle head. The coalescence was expected to increase droplet speed, which was confirmed in the study. The spray turbulence was studied, and the results showed turbulence caused by the event of atomisation and by the oppositely directed fluidising air. It was concluded that particle tracking velocimetry is a suitable tool for in situ spray characterisation. The light transmission through dense particulate systems was found to carry information on particle size and packing density as expected based on the theory of light scattering by solids. It was possible to differentiate binary blends consisting of components with differences in optical properties. Light transmission showed potential as a rapid, simple and inexpensive tool in characterisation of particulate systems giving information on changes in particle systems, which could be utilised in basic process diagnostics.

Hallinnonalariippumattoman palvelumallin jäljillä. Yhteispalvelun näkökulma toimivaltaan, asiakkuuteen ja hallinnon kehittämiseen.

Tutkielman tutkimusongelmana on hallinnonalariippumattoman palvelumallin toteuttaminen julkisessa hallinnossa. Hallinnonalariippumattomalle palvelumallille määritellään tutkielmassa kolme teoreettista lähtökohtaa, jotka ovat toimivalta, asiakkuus ja hallinnon kehittäminen. Tutkimusongelmaan vastataan ottamalla suomalainen yhteispalvelumalli empiirisen ja aineistolähtöisen tutkimuksen kohteeksi ja peilaamalla siitä saatuja kokemuksia määriteltyihin teoreettisiin lähtökohtiin. Samassa yhteydessä tutkimuksen kohteena oleva suomalainen yhteispalvelumalli asettuu osaksi laajempaa hallinnon tutkimuksen viitekehystä ja teoreettista keskustelua. Tutkielman teoreettisia lähtökohtia koskien aineistona on tutkielmassa tarkemman tarkastelun kohteiksi valittuja käsitteitä käsittelevä hallinto- ja organisaatlotieteellinen kirjallisuus. Empiirinen tutkimuskohde, yhteispalvelu, määritellään hallinnon tuottamia virallisasiakirjoja ja voimassa olevaa lainsäädäntöä aineistona käyttäen. Tutkimuskohteen empiirisen analyysin edellyttämän aineiston keräämisen metodina on sovellettu teemahaastattelua. Haastatteluja on tehty yhteensä kuusi tutkimuskohteena olevan aiheen asiantuntijoille, ja haastatellut edustavat kuntakenttää sekä valtion keskus- ja paikallishallintoa. Empiirisen aineiston analyysissa sovelletaan aineistolähtöisen kuvan muodostamiseksi grounded theorya. Tutkielman johtopäätökset muodostuvat tarkasteltaessa tutkimusongelman teoreettisia lähtökohtia yhteispalvelusta aineistolähtöisesti ja ilman teoriaohjautuvuutta muodostuneen kuvan valossa. Toimivaltaa koskien keskeinen johtopäätös on, että kun tavoitellaan kokonaisvaltaista ja laajasti sovellettavaa hallinnonalariippumatonta palvelumallia, ei toimivallan kysymystä voida jättää huomiotta. Yhtenä ratkaisumahdollisuutena on määritellä perinteisen asiallisen toimivallan ohella hallinnonalariippumattomalle palvelujen tarjoamisen menetelmälle toimivaltainen ja keskitetty omistaja- ja vastuutaho. Asiakkuutta koskien hallinnonalariippumaton palvelumalli edellyttää kokonaisvaltaista Citizen Relationship Management -käsitteen kaltaista ymmärrystä asiakkuuksista ja asiakaslähtöisyydestä. Näin ollen New Public Managementin mukainen kulttuurinen siirtymä pois perinteisestä julkisen hallinnon paradigmasta ei ole riittävä, vaan asiakkuuden suhteen olisi huomioitava myös organisaatio-, teknologia- ja prosessinäkökulmat. Hallinnon kehittämisestä voidaan todeta sen sisältyvän implisiittisesti ajatukseen hallinnonalariippumattomasta palvelumallista. Tämä koskee erityisesti eGovemment -käsitteen mukaista informaatioteknologian hyödyntämistä. Vasta informaatioteknologian kehitys on mahdollistanut hallinnonalariippumattoman palvelumallin visioimisen ja tavoittelemisen käytännössä. Samalla hallinnon kehittäminen kohtaa toimintana kuitenkin monia haasteita, joista hallinnonalariippumattoman palvelumallin tapauksessa erityisen relevantteja ovat yhteispalvelusta saatujen kokemusten perusteella rakenteelliset, kulttuuriset ja toiminnalliset haasteet.