Pathological changes at the target tissue level in Sjögren's syndrome and their effect on the exocrine function of the salivary glands

Sjögren s syndrome (SS) is a common autoimmune disease affecting the lacrimal and salivary glands. SS is characterized by a considerable female predominance and a late age of onset, commonly at the time of adreno- and menopause. The levels of the androgen prohormone dehydroepiandrosterone-sulphate (DHEA-S) in the serum are lower in patients with SS than in age- and sex-matched healthy control subjects. The eventual systemic effects of low androgen levels in SS are not currently well understood. Basement membranes (BM) are specialized layers of extracellular matrix and are composed of laminin (LM) and type IV collagen matrix networks. BMs deliver messages to epithelial cells via cellular LM-receptors including integrins (Int) and Lutheran blood group antigen (Lu). The composition of BMs and distribution of LM-receptors in labial salivary glands (LSGs) of normal healthy controls and patients with SS was assessed. LMs have complex and highly regulated distribution in LSGs. LMs seem to have specific tasks in the dynamic regulation of acinar cell function. LM-111 is important for the normal acinar cell differentiation and its expression is diminished in SS. Also LM-211 and -411 seem to have some acinar specific functional tasks in LSGs. LM-311, -332 and -511 seem to have more general structure maintaining and supporting roles in LSGs and are relatively intact also in SS. Ints α3β1, α6β1, α6β4 and Lu seem to supply structural basis for the firm attachment of epithelial cells to the BM in LSGs. The expression of Ints α1β1 and α2β1 differed clearly from other LM-receptors in that they were found almost exclusively around the acini and intercalated duct cells in salivons suggesting some type of acinar cell compartment-specific or dominant function. Expression of these integrins was lower in SS compared to healthy controls suggesting that the LM-111 and -211-to-Int α1β1 and α2β1 interactions are defective in SS and are crucial to the maintenance of the acini in LSGs. DHEA/DHEA-S concentration in serum and locally in saliva of patients with SS seems to have effects on the salivary glands. These effects were first detected using the androgen-dependent CRISP-3 protein, the production and secretion of which were clearly diminished in SS. This might be due to the impaired function of the intracrine DHEA prohormone metabolizing machinery, which fails to successfully convert DHEA into its active metabolites in LSGs. The progenitor epithelial cells from the intercalated ductal area of LSGs migrate to the acinar compartment and then undergo a phenotype change into secretory acinar cells. This migration and phenotype change seem to be regulated by the LM-111-to-Int α1β1/Int α2β1 interactions. Lack of these interactions could be one factor limiting the normal remodelling process. Androgens are effective stimulators of Int α1β1 and α2β1 expression in physiologic concentrations. Addition of DHEA to the culture medium had effective stimulating effect on the Int α1β1 and α2β1 expression and its effect may be deficient in the LSGs of patients with SS.

IgA nephropathy and Henoch-Schönlein nephritis in adults : with special reference to factors affecting outcome

IgA nephropathy (IgAN) is the most common primary glomerulonephritis. In one third of the patients the disease progresses, and they eventually need renal replacement therapy. IgAN is in most cases a slowly progressing disease, and the prediction of progression has been difficult, and the results of studies have been conflicting. Henoch-Schönlein nephritis (HSN) is rare in adults, and prediction of the outcome is even more difficult than in IgAN. This study was conducted to evaluate the clinical and histopathological features and predictors of the outcome of IgAN and HSN diagnosed in one centre (313 IgAN patients and 38 HSN patients), and especially in patients with normal renal function at the time of renal biopsy. The study also aimed to evaluate whether there is a difference in the progression rates in four countries (259 patients from Finland, 112 from UK, 121 from Australia and 274 from Canada), and if so, can this be explained by differences in renal biopsy policy. The third aim was to measure urinary excretions of cytokines interleukin 1ß (IL-1ß) and interleukin 1 receptor antagonist (IL-1ra) in patients with IgAN and HSN and the correlations of excretion of these substances with histopathological damage and clinical factors. A large proportion of the patients diagnosed in Helsinki as having IgAN had normal renal function (161/313 patients). Four factors, (hypertension, higher amounts of urinary erythrocytes, severe arteriolosclerosis and a higher glomerular score) which independently predicted progression (logistic regression analysis), were identified in mild disease. There was geographic variability in renal survival in patients with IgAN. When age, levels of renal function, proteinuria and blood pressure were taken into account, it showed that the variability related mostly to lead-time bias and renal biopsy indications. Amount of proteinuria more than 0.4g/24h was the only factor that was significantly related to the progression of HSN. the Hypertension and the level of renal function were found to be factors predicting outcome in patients with normal renal function at the time of diagnosis. In IgAN patients, IL-1ra excretion into urine was found to be decreased as compared with HSN patients and healthy controls. Patients with a high IL-1ra/IL-1ß ratio had milder histopathological changes in renal biopsy than patients with a low/normal IL-1ra/IL-1ß ratio. It was also found that the excretion of IL-1ß and especially IL-1ra were significantly higher in women. In conclusion, it was shown that factors associated with outcome can reliably be identified even in mild cases of IgAN. Predicting outcome in adult HSN, however, remains difficult.

Accuracy of absorbed dose in external photon beam radiotherapy : what level is sufficient and how to approach it?

Radiation therapy (RT) plays currently significant role in curative treatments of several cancers. External beam RT is carried out mostly by using megavoltage beams of linear accelerators. Tumor eradication and normal tissue complications correlate to dose absorbed in tissues. Normally this dependence is steep and it is crucial that actual dose within patient accurately correspond to the planned dose. All factors in a RT procedure contain uncertainties requiring strict quality assurance. From hospital physicist´s point of a view, technical quality control (QC), dose calculations and methods for verification of correct treatment location are the most important subjects. Most important factor in technical QC is the verification that radiation production of an accelerator, called output, is within narrow acceptable limits. The output measurements are carried out according to a locally chosen dosimetric QC program defining measurement time interval and action levels. Dose calculation algorithms need to be configured for the accelerators by using measured beam data. The uncertainty of such data sets limits for best achievable calculation accuracy. All these dosimetric measurements require good experience, are workful, take up resources needed for treatments and are prone to several random and systematic sources of errors. Appropriate verification of treatment location is more important in intensity modulated radiation therapy (IMRT) than in conventional RT. This is due to steep dose gradients produced within or close to healthy tissues locating only a few millimetres from the targeted volume. The thesis was concentrated in investigation of the quality of dosimetric measurements, the efficacy of dosimetric QC programs, the verification of measured beam data and the effect of positional errors on the dose received by the major salivary glands in head and neck IMRT. A method was developed for the estimation of the effect of the use of different dosimetric QC programs on the overall uncertainty of dose. Data were provided to facilitate the choice of a sufficient QC program. The method takes into account local output stability and reproducibility of the dosimetric QC measurements. A method based on the model fitting of the results of the QC measurements was proposed for the estimation of both of these factors. The reduction of random measurement errors and optimization of QC procedure were also investigated. A method and suggestions were presented for these purposes. The accuracy of beam data was evaluated in Finnish RT centres. Sufficient accuracy level was estimated for the beam data. A method based on the use of reference beam data was developed for the QC of beam data. Dosimetric and geometric accuracy requirements were evaluated for head and neck IMRT when function of the major salivary glands is intended to be spared. These criteria are based on the dose response obtained for the glands. Random measurement errors could be reduced enabling lowering of action levels and prolongation of measurement time interval from 1 month to even 6 months simultaneously maintaining dose accuracy. The combined effect of the proposed methods, suggestions and criteria was found to facilitate the avoidance of maximal dose errors of up to even about 8 %. In addition, their use may make the strictest recommended overall dose accuracy level of 3 % (1SD) achievable.

Irradiation-mediated tailoring of carbon nanotubes

The ever-increasing demand for faster computers in various areas, ranging from entertaining electronics to computational science, is pushing the semiconductor industry towards its limits on decreasing the sizes of electronic devices based on conventional materials. According to the famous law by Gordon E. Moore, a co-founder of the world s largest semiconductor company Intel, the transistor sizes should decrease to the atomic level during the next few decades to maintain the present rate of increase in the computational power. As leakage currents become a problem for traditional silicon-based devices already at sizes in the nanometer scale, an approach other than further miniaturization is needed to accomplish the needs of the future electronics. A relatively recently proposed possibility for further progress in electronics is to replace silicon with carbon, another element from the same group in the periodic table. Carbon is an especially interesting material for nanometer-sized devices because it forms naturally different nanostructures. Furthermore, some of these structures have unique properties. The most widely suggested allotrope of carbon to be used for electronics is a tubular molecule having an atomic structure resembling that of graphite. These carbon nanotubes are popular both among scientists and in industry because of a wide list of exciting properties. For example, carbon nanotubes are electronically unique and have uncommonly high strength versus mass ratio, which have resulted in a multitude of proposed applications in several fields. In fact, due to some remaining difficulties regarding large-scale production of nanotube-based electronic devices, fields other than electronics have been faster to develop profitable nanotube applications. In this thesis, the possibility of using low-energy ion irradiation to ease the route towards nanotube applications is studied through atomistic simulations on different levels of theory. Specifically, molecular dynamic simulations with analytical interaction models are used to follow the irradiation process of nanotubes to introduce different impurity atoms into these structures, in order to gain control on their electronic character. Ion irradiation is shown to be a very efficient method to replace carbon atoms with boron or nitrogen impurities in single-walled nanotubes. Furthermore, potassium irradiation of multi-walled and fullerene-filled nanotubes is demonstrated to result in small potassium clusters in the hollow parts of these structures. Molecular dynamic simulations are further used to give an example on using irradiation to improve contacts between a nanotube and a silicon substrate. Methods based on the density-functional theory are used to gain insight on the defect structures inevitably created during the irradiation. Finally, a new simulation code utilizing the kinetic Monte Carlo method is introduced to follow the time evolution of irradiation-induced defects on carbon nanotubes on macroscopic time scales. Overall, the molecular dynamic simulations presented in this thesis show that ion irradiation is a promisingmethod for tailoring the nanotube properties in a controlled manner. The calculations made with density-functional-theory based methods indicate that it is energetically favorable for even relatively large defects to transform to keep the atomic configuration as close to the pristine nanotube as possible. The kinetic Monte Carlo studies reveal that elevated temperatures during the processing enhance the self-healing of nanotubes significantly, ensuring low defect concentrations after the treatment with energetic ions. Thereby, nanotubes can retain their desired properties also after the irradiation. Throughout the thesis, atomistic simulations combining different levels of theory are demonstrated to be an important tool for determining the optimal conditions for irradiation experiments, because the atomic-scale processes at short time scales are extremely difficult to study by any other means.

Metrology of gaseous air pollutants

The need for mutual recognition of accurate measurement results made by competent laboratories has been very widely accepted at the international level e.g., at the World Trade Organization. A partial solution to the problem was made by the International Committee for Weights and Measures (CIPM) in setting up the Mutual Recognition Arrangement (CIPM MRA), which was signed by National Metrology Institutes (NMI) around the world. The core idea of the CIPM MRA is to have global arrangements for the mutual acceptance of the calibration certificates of National Metrology Institutes. The CIPM MRA covers all the fields of science and technology for which NMIs have their national standards. The infrastructure for the metrology of the gaseous compounds carbon monoxide (CO), nitrogen monoxide (NO), nitrogen dioxide (NO2), sulphur dioxide (SO2) and ozone (O3) has been constructed at the national level at the Finnish Meteorological Institute (FMI). The calibration laboratory at the FMI was constructed for providing calibration services for air quality measurements and to fulfil the requirements of a metrology laboratory. The laboratory successfully participated, with good results, in the first comparison project, which was aimed at defining the state of the art in the preparation and analysis of the gas standards used by European metrology institutes and calibration laboratories in the field of air quality. To confirm the competence of the laboratory, the international external surveillance study was conducted at the laboratory. Based on the evidence, the Centre for Metrology and Accreditation (MIKES) designated the calibration laboratory at the Finnish Meteorological Institute (FMI) as a National Standard Laboratory in the field of air quality. With this designation, the MIKES-FMI Standards Laboratory became a member of CIPM MRA, and Finland was brought into the internationally-accepted forum in the field of gas metrology. The concept of ‘once measured - everywhere accepted’ is the leading theme of the CIPM MRA. The calibration service of the MIKES-FMI Standards Laboratory realizes the SI traceability system for the gas components, and is constructed to enable it to meet the requirements of the European air quality directives. In addition, all the relevant uncertainty sources that influence the measurement results have been evaluated, and the uncertainty budgets for the measurement results have been created.

Balancing Social Citizenship and New Paternalism : Finnish activation policy and street-level practice in a comparative perspective

The study examines the origin and development of the Finnish activation policy since the mid-1990s by using the 2001 activation reform as a benchmark. The notion behind activation is to link work obligations to welfare benefits for the unemployed. The focus of the thesis is policy learning and the impact of ideas on the reform of the welfare state. The broader research interests of the thesis are summarized by two groups of questions. First, how was the Finnish activation policy developed and what specific form did it receive in the 2001 activation reform? Second, how does the Finnish activation policy compare to the welfare reforms in the EU and in the US? What kinds of ideas and instruments informed the Finnish policy? To what extent can we talk about a restructuring or transformation of the Nordic welfare policy? Theoretically, the thesis is embedded in the comparative welfare state research and the concepts used in the contemporary welfare state discourse. Activation policy is analysed against the backdrop of the theories about the welfare state, welfare state governance and citizenship. Activation policies are also analysed in the context of the overall modernization and individualization of lifestyles and its implications for the individual citizen. Further, the different perspectives of the policy analysis are applied to determine the role of implementation and street-level practice within the whole. Empirically, the policy design, its implementation and the experiences of the welfare staff and recipients in Finland are examined. The policy development, goals and instruments of the activation policies have followed astonishingly similar paths in the different welfare states and regimes over the last two decades. In Finland, the policy change has been manifested through several successive reforms that have been introduced since the mid-1990s. The 2001 activation reform the Act on Rehabilitative Work Experience illustrates the broader trend towards stricter work requirements and draws its inspiration from the ideas of new paternalism. The ideas, goals and instruments of the international activation trend are clearly visible in the reform. Similarly, the reform has implications for the traditional Nordic social policies, which incorporate institutionalised social rights and the provision of services.

Towards a United States of Africa? Combining Zambian and AU level debate.

Globalisaatio on luonut uuden maailmanjärjestelmän jonka myötä yksittäisten valtioiden vaikutusvalta on vähentynyt entisestään. Tämä pitää paikkansa erityisesti kehittyvien maiden kohdalla, esimerkiksi Afrikassa. Afrikka on pyrkinyt taistelemaan globalisaation tuomia negatiivisia vaikutuksia vastaan alueellistumisen ja maanosan yhtenäisyyttä ajavien hankkeiden kautta jo vuosikymmenien ajan, mutta toistaiseksi tulokset eivät ole olleet vakuttavia. Tällä hetkellä Afrikan Unionissa keskustellaan hankkeesta muodostaa Afrikan Yhdysvallat. Aiemmista hankkeista poiketen tämän uuden aloitteen ajatus perustuu ylikansallisuudelle, jossa yksittäiset valtiot luovuttavat valtaansa ylikansallisille elimille, kuten Afrikan Unionin hallitukselle. Näin ollen on tärkeää tarkastella aloitetta Afrikan Yhdysvaltojen perustamiseksi ja arvioida, voisiko tällainen ylikansallinen organisaatio auttaa Afrikkaa kääntämään globalisaation haittavaikutukset myönteisiksi. Tämä Pro Gradu-tutkielma väittää sen olevan mahdollista, mutta vain siinä tapauksessa että Afrikka on valmis hyväksymään yhtenäisyyden rajoitukset. Aiemman tutkimuksen vähyyden vuoksi on myös tarpeen tutkia Afrikan Yhdysvalloista kansallisilla tasoilla käytävää keskustelua. Tämän vuoksi tässä tutkielmassa painotetaan esimerkkimaa Sambian kautta yhden Afrikan Unionin jäsenmaan keskinäistä keskustelua aiheesta ja verrataan sitä Afrikan Unionin tason keskusteluun. Tutkielma sisältää kirjallisuuskatsauksen sekä tapaustutkimuksen. Tutkimusaineisto koostuu sambialaisista sanomalehtiotteista sekä Sambian valtion ja Afrikan Unionin virallisista asiakirjoista. Pääasiallisena tutkimusmenetelmänä on laadullinen sisällönanalyysi. Teoreettinen viitekehys perustuu afrikkalaisen valtion ja kansalaisyhteiskunnan, alueellistumisen, globalisaation hallinnan, pan-afrikkalaisuuden ja poliittisen integraation teorioihin sekä historialliseen katsaukseen Afrikan yhtenäisyydestä. Perimmäisenä tarkoituksena on lisätä ymmärrystä afrikkalaisesta valtiosta ja politiikasta. Tutkimuksen tulosten mukaan on havaittavissa aukko valtioiden virallisten toimijoiden näkemysten ja kansalaisyhteiskunnan huolenaiheiden välillä. Viralliset toimijat näyttävät olevan kansalaisyhteiskuntaa vahvemmin Afrikan Yhdysvaltojen kannalla. Virallisten toimijoiden korostaessa Afrikan aatteellista yhtenäisyyttä kansalaisyhteiskunta on huolissaan sen toteutumisesta käytännössä. Esiin nousee myös kysymys 'afrikkalaisesta' identiteetistä ja kansalaisuudesta sekä kommunikaatiosta valtion ja kansalaisten välillä.

Carbon dynamics in peatlands under changing hydrology : Effects of water level drawdown on litter quality, microbial enzyme activities and litter decomposition rates

Pristine peatlands are carbon (C) accumulating wetland ecosystems sustained by a high water level (WL) and consequent anoxia that slows down decomposition. Persistent WL drawdown as a response to climate and/or land-use change directly affects decomposition: increased oxygenation stimulates decomposition of the old C (peat) sequestered under prior anoxic conditions. Responses of the new C (plant litter) in terms of quality, production and decomposability, and the consequences for the whole C cycle of peatlands are not fully understood. WL drawdown induces changes in plant community resulting in shift in dominance from Sphagnum and graminoids to shrubs and trees. There is increasing evidence that the indirect effects of WL drawdown via the changes in plant communities will have more impact on the ecosystem C cycling than any direct effects. The aim of this study is to disentangle the direct and indirect effects of WL drawdown on the new C by measuring the relative importance of 1) environmental parameters (WL depth, temperature, soil chemistry) and 2) plant community composition on litter production, microbial activity, litter decomposition rates and, consequently, on the C accumulation. This information is crucial for modelling C cycle under changing climate and/or land-use. The effects of WL drawdown were tested in a large-scale experiment with manipulated WL at two time scales and three nutrient regimes. Furthermore, the effect of climate on litter decomposability was tested along a north-south gradient. Additionally, a novel method for estimating litter chemical quality and decomposability was explored by combining Near infrared spectroscopy with multivariate modelling. WL drawdown had direct effects on litter quality, microbial community composition and activity and litter decomposition rates. However, the direct effects of WL drawdown were overruled by the indirect effects via changes in litter type composition and production. Short-term (years) responses to WL drawdown were small. In long-term (decades), dramatically increased litter inputs resulted in large accumulation of organic matter in spite of increased decomposition rates. Further, the quality of the accumulated matter greatly changed from that accumulated in pristine conditions. The response of a peatland ecosystem to persistent WL drawdown was more pronounced at sites with more nutrients. The study demonstrates that the shift in vegetation composition as a response to climate and/or land-use change is the main factor affecting peatland ecosystem C cycle and thus dynamic vegetation is a necessity in any models applied for estimating responses of C fluxes to changes in the environment. The time scale for vegetation changes caused by hydrological changes needs to extend to decades. This study provides grouping of litter types (plant species and part) into functional types based on their chemical quality and/or decomposability that the models could utilize. Further, the results clearly show a drop in soil temperature as a response to WL drawdown when an initially open peatland converts into a forest ecosystem, which has not yet been considered in the existing models.

Lihaluujauhon soveltuvuus sokerijuurikkaan lannoitteeksi

Lihaluujauho muodostaa maatilojen myytävien kasvi- ja eläinperäisten tuotteiden jälkeen tärkeimmän agroekosysteemeistä poispäin suuntautuvan ravinnevirran. Se sisältää runsaasti pääkasvinravinteita typpeä, fosforia ja kalsiumia (N ~8%, P ~5%, Ca yleensä ~10-15% luuaineksen määrästä riippuen), sekä kaliumia n.1% tai alle. Lihaluujauho on todettu tehokkaaksi lannoitteeksi useilla viljelykasveilla ja sen käyttö on sallittu myös luomuviljelyssä EU-alueella. Lihaluujauhoon ja erityisesti sen rehukäyttöön liittyvistä riskeistä merkittävin on TSE-tautien riski (naudan BSE-, lampaiden ja vuohien scrapie-, sekä ihmisen vCJD-taudit). Rehukäyttöä on monissa maissa rajoitettu 1980-luvulla puhjenneen BSE-kriisin myötä. BSE-taudin leviäminen yhdistettiin tilanteeseen, jossa nautaperäistä lihaluujauhoa käytettiin nautaeläinten rehun ainesosana. Myös lihaluujauhon käytössä turkiseläinrehuna saattaa piillä BSE:n tai muun TSE-taudin riski. Oikein käsitellyn lihaluujauhon lannoitekäyttöön ei kuitenkaan näytä tarkastelemieni tutkimusten perusteella sisältyvän huomattavaa TSEriskiä, jos huolehditaan asianmukaisista varotoimista ja menettelyistä sekä tuotteen valmistusprosessissa, että käytettäessä lannoitetta. Lihaluujauhon lannoitekäytön lisääminen edistäisi ruokajärjestelmämme ravinnekierron sulkemista etenkin fosforin osalta. Lihaluujauho on uusiutuva luonnonvara, jonka lannoitekäytöllä voitaisiin korvata huomattava osa lannoiteaineena kulutettavista fosforipitoisista kiviaineista. Sokerijuurikkaan lannoituskokeissa Varsinais-Suomen Kaarinassa vuosina 2008 ja 2009 lihaluujauhokäsittelyt eivät menestyneet aivan yhtä hyvin satotasovertailussa kuin kontrollikäsittelyiden NPK-väkilannoitteet, mutta laatuominaisuuksiltaan (sokeripitoisuus, amino-N, K, ja Na-pitoisuudet) joiltakin osin kontrollikäsittelyjä paremmin. Kokeissa käytetyt lajikkeet olivat ’Jesper’ vuonna 2008 ja ’Lincoln’ vuonna 2009. Käytetty lihaluujauholannoite oli Honkajoki Oy:n Viljo Yleislannoite 8-4-3, joka sisälsi noin 10% kaliumsulfaatin ja kasviperäisten sivutuotteiden seosta. Viljo-lannoitetta käytettiin sekä yksistään, että yhdistettynä 10-25%:iin väkilannoitetta. Vuoden 2009 Viljo-koejäseniin vielä lisättiin kaliumsulfaattilannoitetta (42% K, 18% S), jotta päästiin annetun kaliumin määrässä päästiin lannoitussuosituksen (60 kg K/ha) tasolle. Pelkkä Viljo-lannoite tuotti merkitsevästi alhaisemmat sadot kuin kontrollikäsittelyt molempina vuosina. Kuitenkin kun Viljolannoitteen ohella käytettiin väkilannoitetta (10-25% kasvin typentarpeesta) päästiin varsin lähelle kontrollikäsittelyiden satotasoja. Myös pelkän LLJ-lannoitteen tuottamat satotasot olivat kuitenkin selvästi paremmat kuin Suomen keskimääräiset juurikassadot. Viljo-käsittelyillä oli selvästi positiivinen vaikutus laatutekijöihin amino-N, K ja Na vuonna 2008, mutta vuonna 2009 näiden pitoisuudet jäivät kontrollikäsittelyjen tasolle. Viljo-käsittelyiden sokeripitoisuudet olivat vuonna 2008 kontrollikäsittelyn luokkaa ja Viljo77%+NK1:n osalta kontrollia merkitsevästi paremmat. Vuoden 2009 sokeripitoisuudet olivat kaikilla koejäsenillä erinomaiset, ja käsittelyiden välillä ei ilmennyt merkitseviä eroja. Kokeiden perusteella kaliumsulfaatilla täydennetty lihaluujauho on hyvin toimiva lannoite sokerijuurikkaalla Suomen olosuhteissa, etenkin yhdistettynä väkilannoitteeseen.

Jatkuvasatoisten mansikoiden lannoitus rajoitetussa kasvualustassa

Mansikka (Fragaria × ananassa Duch.) on tärkein Suomessa viljelty marja sekä määrällisesti että taloudellisesti. Suomessa ongelmana on lyhyt satokausi ja matala satotaso. Pääsadon aikaan runsas mansikan tarjonta markkinoilla laskee huomattavasti mansikan hintaa. Paras hinta saadaan normaalin satokauden ulkopuolella. Jatkuvasatoiset mansikkalajikkeet mahdollistaisivat pidemmän ja tasaisen satokauden, mikä vakauttaisi mansikan hintaa. Jatkuvasatoinen mansikka sopii viljelyyn kausihuoneissa korotetuilla kasvualustoilla, jolloin lannoitus ja kastelu hoidetaan tippukastelulla. Jatkuvasatoinen mansikka tuottaa kukkia ja marjoja koko satokauden, mikä vaikuttaa sen ravinnetarpeeseen. Tehdyssä tutkimuksessa testattiin kolmea eri lannoitustasoa 1,5 mS/cm, 2,3mS/cm ja 3,0 mS/cm, joiden N:K –suhde marjojen kypsymisvaiheessa oli 1:1,5. Neljäs käsittely oli kastelu johtokyvyllä 2,3 mS/cm N:K –suhteen ollessa 1:2 marjojen kypsyessä. Tutkimuksessa havainnointiin taimien vegetatiivista kasvua sekä sadon muodostusta ja marjojen laatua. Samalla seurattiin ylivaluntaveden määrää sekä veden mukana huuhtoutunutta fosforia ja typpeä. Tutkimuksessa käytetyt lajikkeet olivat ’Malling Opal’ ja ’Rondo’. Tämän tutkimuksen tulokset tukevat aikaisempia tutkimuksia, että mansikan ravinnetarve on suhteellisen matala. Voimakkain vegetatiivinen kasvu, suurin sato ja suurimmat marjat saatiin alimmalla testatulla johtokyvyllä (1,5 mS/cm). Lannoitustasolla oli hyvin vähän vaikutusta marjan laatuun tai sadon ajoittumiseen. Myöskään N:K – suhteen muutoksella ei ollut vaikutusta marjan laatuun. Taimien veden otto oli suurinta alimmalla lannoitustasolla, ja mahdollisesti kasteluveden korkea ionipitoisuus vaikeutti kasvin veden ottoa korkeilla veden johtokyvyillä. Valumaveden mukana poistuneet typpi- ja fosforipäästöt kasvoivat huomattavasti kasteluveden johtokyvyn noustessa.

Aspergillus niger -proliiniendopeptidaasi prolamiinien eliminoinnissa

Tutkielman kirjallisuusosassa perehdyttiin vehnän, rukiin ja ohran, eli Triticeaeprolamiinien erityisasemaan keliakianäkökulmasta tarkasteltuna ja prolamiinien hydrolyysiin proliinispesifeillä entsyymeillä. Lisäksi tarkasteltiin prolamiinien immunologisia määritysmenetelmiä. Keliakiassa haitalliset gluteenipeptidit sisältävät runsaasti proliinia ja ovat hankalia pilkkoa muilla kuin proliinispesifeillä peptidaaseilla. Suurin osa immunologisen reaktion aiheuttavista gluteenilähtöisistä peptideistä voidaan pilkkoa idätetyn viljan endogeenisilla entsyymeillä happamissa olosuhteissa, mutta jäljellejäävä prolamiinipitoisuus ylittää edelleen gluteenittomille tuotteille sallitun rajan. Kokeellisen työn tavoitteena oli eliminoida happamalla mallasinkubaatiolla valmistettujen vehnä-, ohra- ja ruismallasautolysaattien sisältämä jäännösprolamiini Aspergillus niger -homeen tuottamalla proliinispesifillä endopeptidaasilla (AN-PEP) siten, että hydrolysaattia voitaisiin käyttää gluteenittomissa leivontasovelluksissa. Proteiinien hydrolyysiä tarkkailtiin kokoekskluusiokromatografialla (SEC), vapaan aminotypen (FAN) muodostumisena ja SDS-PAGE-elektroforeesilla. Jäännösprolamiinien pilkkoutumista seurattiin immunologisella R5-ELISA-menetelmällä. AN-PEP-inkubaatiolla saatiin aikaan voimakasta prolamiinien pilkkoutumista; mallasautolysaattien jäännösprolamiinista pilkkoutui yli 96 %. SEC- ja FAN-analyysien perusteella inkubaatioaikaa kannatti jatkaa yli 4 h, jolloin polypeptidit pilkkoutuivat edelleen pienemmiksi hydrolyysituotteiksi. Vehnä- ja ruismallashydrolysaattien prolamiinipitoisuuden todettiin laskevan 22 h inkubaation aikana alle tason 100 mg/kg R5-ELISA-menetelmällä määritettynä. Matalimmat prolamiinipitoisuudet saavutettiin AN-PEP-pitoisuudella 35 ?l / g mallasautolysaattia. Codex Alimentarius -komission säädöksen mukaan keliakiaruokavalioon soveltuvat ns. erittäin vähägluteeniset tuotteet saavat sisältää gluteenia enintään 100 mg/kg. Erityisesti AN-PEP-käsiteltyä ruismallasraaka-ainetta voitaisiin mahdollisesti käyttää tuomaan rukiista aromia gluteenittomiin leipiin. Ennen kuin mallashydrolysaatit ovat valmiita kaupallisiin sovelluksiin, on tarkasteltava niiden todellisia mahdollisuuksia parantaa elintarvikkeiden makua ja aromia sekä todettava uuden teknologian turvallisuus keliaakikoille.

Effect of water vapour stabilization of raw materials on the quality of the inhalation product

Generation of raw materials for dry powder inhalers by different size reduction methods can be expected to influence physical and chemical properties of the powders. This can cause differences in particle size, size distribution, shape, crystalline properties, surface texture and energy. These physical properties of powders influence the behaviour of particles before and after inhalation. Materials with an amorphous surface have different surface energy compared to materials with crystalline surface. This can affect the adhesion and cohesion of particles. Changes in the surface nature of the drug particles results in a change in product performance. By stabilization of the raw materials the amorphous surfaces are converted into crystalline surfaces. The primary aim of the study was to investigate the influence of the surface properties of the inhalation particles on the quality of the product. The quality of the inhalation product is evaluated by measuring the fine particle dose (FPD). FDP is the total dose of particles with aerodynamic diameters smaller than 5,0 μm. The secondary aim of this study was to achieve the target level of the FPD and the stability of the FPD. This study was also used to evaluate the importance of the stabilization of the inhalation powders. The study included manufacturing and analysing drug substance 200 μg/dose inhalation powder batches using non-stabilized or stabilized raw materials. The inhaler formulation consisted of micronized drug substance, lactose <100μm and micronized lactose <10μm. The inhaler device was Easyhaler®. Stabilization of the raw materials was done in different relative humidity, temperature and time. Surface properties of the raw materials were studied by dynamic vapour sorption, scanning electron microscopy and three-point nitrogen adsorption technique. Particle size was studied by laser diffraction particle size analyzer. Aerodynamic particle size distribution from inhalers was measured by new generation impactor. Stabilization of all three raw materials was successful. A clear difference between nonstabilized and stabilized raw materials was achieved for drug substance and lactose <10μm. However for lactose <100μm the difference wasn’t as clear as wanted. The surface of the non-stabilized drug substance was more irregular and the particles had more roughness on the surface compared to the stabilized drug substances particles surface. The surface of the stabilized drug particles was more regular and smoother than non-stabilized. Even though a good difference between stabilized and non-stabilized raw materials was achieved, a clear evidence of the effect of the surface properties of the inhalation particles on the quality of the product was not observed. Stabilization of the raw materials didn’t lead to a higher FPD. Possible explanations for the unexpected result might be too rough conditions in the stabilization of the drug substance or smaller than wanted difference in the degree of stabilization of the main component of the product <100μm. Despite positive effects on the quality of the product were not seen there appears to be some evidence that stabilized drug substance results in smaller particle size of dry powder inhalers.