TOTEM Physics

This article discusses the physics programme of the TOTEM experiment at the LHC. A new special beam optics with beta* = 90 m, enabling the measurements of the total cross-section, elastic pp scattering and diffractive phenomena already at early LHC runs, is explained. For this and the various other TOTEM running scenarios, the acceptances of the leading proton detectors and of the forward tracking stations for some physics processes are described.

Search for new physics in the μμ+e/μ+E̸T channel with a low-pT lepton threshold at the Collider Detector at Fermilab

A search for new physics using three-lepton (trilepton) data collected with the CDF II detector and corresponding to an integrated luminosity of 976 pb-1 is presented. The standard model predicts a low rate of trilepton events, which makes some supersymmetric processes, such as chargino-neutralino production, measurable in this channel. The mu+mu+l signature is investigated, where l is an electron or a muon, with the additional requirement of large missing transverse energy. In this analysis, the lepton transverse momenta with respect to the beam direction (pT) are as low as 5 GeV/c, a selection that improves the sensitivity to particles which are light as well as to ones which result in leptonically decaying tau leptons. At the same time, this low-p_T selection presents additional challenges due to the non-negligible heavy-quark background at low lepton momenta. This background is measured with an innovative technique using experimental data. Several dimuon and trilepton control regions are investigated, and good agreement between experimental results and standard-model predictions is observed. In the signal region, we observe one three-muon event and expect 0.4+/-0.1 mu+mu+l events

Expected Performance of the ATLAS Experiment - Detector, Trigger and Physics

A detailed study is presented of the expected performance of the ATLAS detector. The reconstruction of tracks, leptons, photons, missing energy and jets is investigated, together with the performance of b-tagging and the trigger. The physics potential for a variety of interesting physics processes, within the Standard Model and beyond, is examined. The study comprises a series of notes based on simulations of the detector and physics processes, with particular emphasis given to the data expected from the first years of operation of the LHC at CERN.

First Measurement of the b-Jet Cross Section in Events with a W Boson in pp̅ Collisions at √s=1.96 TeV

The cross section for jets from b quarks produced with a W boson has been measured in ppbar collision data from 1.9/fb of integrated luminosity recorded by the CDF II detector at the Tevatron. The W+b-jets process poses a significant background in measurements of top quark production and prominent searches for the Higgs boson. We measure a b-jet cross section of 2.74 +- 0.27(stat.) +- 0.42(syst.) pb in association with a single flavor of leptonic W boson decay over a limited kinematic phase space. This measured result cannot be accommodated in several available theoretical predictions.

Top polarization as a probe of new physics

We investigate the effects of new physics scenarios containing a high mass vector resonance on top pair production at the LHC, using the polarization of the produced top. In particular we use kinematic distributions of the secondary lepton coming from top decay, which depends on top polarization, as it has been shown that the angular distribution of the decay lepton is insensitive to the anomalous tbW vertex and hence is a pure probe of new physics in top quark production. Spin sensitive variables involving the decay lepton are used to probe top polarization. Some sensitivity is found for the new couplings of the top.

Enhancing Physics Education in the National Defence University : A design based research approach in the production of learning material

This research is connected with an education development project for the four-year-long officer education program at the National Defence University. In this curriculum physics was studied in two alternative course plans namely scientific and general. Observations connected to the later one e.g. student feedback and learning outcome gave indications that action was needed to support the course. The reform work was focused on the production of aligned course related instructional material. The learning material project produced a customized textbook set for the students of the general basic physics course. The research adapts phases that are typical in Design Based Research (DBR). The research analyses the feature requirements for physics textbook aimed at a specific sector and frames supporting instructional material development, and summarizes the experiences gained in the learning material project when the selected frames have been applied. The quality of instructional material is an essential part of qualified teaching. The goal of instructional material customization is to increase the product's customer centric nature and to enhance its function as a support media for the learning process. Textbooks are still one of the core elements in physics teaching. The idea of a textbook will remain but the form and appearance may change according to the prevailing technology. The work deals with substance connected frames (demands of a physics textbook according to the PER-viewpoint, quality thinking in educational material development), frames of university pedagogy and instructional material production processes. A wide knowledge and understanding of different frames are useful in development work, if they are to be utilized to aid inspiration without limiting new reasoning and new kinds of models. Applying customization even in the frame utilization supports creative and situation aware design and diminishes the gap between theory and practice. Generally, physics teachers produce their own supplementary instructional material. Even though customization thinking is not unknown the threshold to produce an entire textbook might be high. Even though the observations here are from the general physics course at the NDU, the research gives tools also for development in other discipline related educational contexts. This research is an example of an instructional material development work together the questions it uncovers, and presents thoughts when textbook customization is rewarding. At the same time, the research aims to further creative customization thinking in instruction and development. Key words: Physics textbook, PER (Physics Education Research), Instructional quality, Customization, Creativity

Inhomogeneous Structures in Holographic Superfluids I

We begin an investigation of inhomogeneous structures in holographic superfluids. As a first example, we study domain wall like defects in the 3+1 dimensional Einstein-Maxwell-Higgs theory, which was developed as a dual model for a holographic superconductor. In [1], we reported on such "dark solitons" in holographic superfluids. In this work, we present an extensive numerical study of their properties, working in the probe limit. We construct dark solitons for two possible condensing operators, and find that both of them share common features with their standard superfluid counterparts. However, both are characterized by two distinct coherence length scales (one for order parameter, one for charge condensate). We study the relative charge depletion factor and find that solitons in the two different condensates have very distinct depletion characteristics. We also study quasiparticle excitations above the holographic superfluid, and find that the scale of the excitations is comparable to the soliton coherence length scales.

Search for New Physics with a Dijet Plus Missing ET Signature in pp̅ Collisions at √s=1.96 TeV

We present results of a signature-based search for new physics using a dijet plus missing transverse energy data sample collected in 2 fb-1 of p-pbar collisions at sqrt(s) = 1.96 TeV with the CDF II detector at the Fermilab Tevatron. We observe no significant event excess with respect to the standard model prediction and extract a 95% C.L. upper limit on the cross section times acceptance for a potential contribution from a non-standard model process. Based on this limit the mass of a first or second generation scalar leptoquark is constrained to be above 187 GeV/c^2.

Didactical reconstructions for organizing knowledge in physics teacher education

Physics teachers are in a key position to form the attitudes and conceptions of future generations toward science and technology, as well as to educate future generations of scientists. Therefore, good teacher education is one of the key areas of physics departments education program. This dissertation is a contribution to the research-based development of high quality physics teacher education, designed to meet three central challenges of good teaching. The first challenge relates to the organization of physics content knowledge. The second challenge, connected to the first one, is to understand the role of experiments and models in (re)constructing the content knowledge of physics for purposes of teaching. The third challenge is to provide for pre-service physics teachers opportunities and resources for reflecting on or assessing their knowledge and experience about physics and physics education. This dissertation demonstrates how these challenges can be met when the content knowledge of physics, the relevant epistemological aspects of physics and the pedagogical knowledge of teaching and learning physics are combined. The theoretical part of this dissertation is concerned with designing two didactical reconstructions for purposes of physics teacher education: the didactical reconstruction of processes (DRoP) and the didactical reconstruction of structures (DRoS). This part starts with taking into account the required professional competencies of physics teachers, the pedagogical aspects of teaching and learning, and the benefits of the graphical ways of representing knowledge. Then it continues with the conceptual and philosophical analysis of physics, especially with the analysis of experiments and models role in constructing knowledge. This analysis is condensed in the form of the epistemological reconstruction of knowledge justification. Finally, these two parts are combined in the designing and production of the DRoP and DRoS. The DRoP captures the knowledge formation of physical concepts and laws in concise and simplified form while still retaining authenticity from the processes of how concepts have been formed. The DRoS is used for representing the structural knowledge of physics, the connections between physical concepts, quantities and laws, to varying extents. Both DRoP and DRoS are represented in graphical form by means of flow charts consisting of nodes and directed links connecting the nodes. The empirical part discusses two case studies that show how the three challenges are met through the use of DRoP and DRoS and how the outcomes of teaching solutions based on them are evaluated. The research approach is qualitative; it aims at the in-depth evaluation and understanding about the usefulness of the didactical reconstructions. The data, which were collected from the advanced course for prospective physics teachers during 20012006, consisted of DRoP and DRoS flow charts made by students and student interviews. The first case study discusses how student teachers used DRoP flow charts to understand the process of forming knowledge about the law of electromagnetic induction. The second case study discusses how student teachers learned to understand the development of physical quantities as related to the temperature concept by using DRoS flow charts. In both studies, the attention is focused on the use of DRoP and DRoS to organize knowledge and on the role of experiments and models in this organization process. The results show that students understanding about physics knowledge production improved and their knowledge became more organized and coherent. It is shown that the flow charts and the didactical reconstructions behind them had an important role in gaining these positive learning results. On the basis of the results reported here, the designed learning tools have been adopted as a standard part of the teaching solutions used in the physics teacher education courses in the Department of Physics, University of Helsinki.

Sneutrino-antisneutrino oscillations at colliders

Modern elementary particle physics is based on quantum field theories. Currently, our understanding is that, on the one hand, the smallest structures of matter and, on the other hand, the composition of the universe are based on quantum field theories which present the observable phenomena by describing particles as vibrations of the fields. The Standard Model of particle physics is a quantum field theory describing the electromagnetic, weak, and strong interactions in terms of a gauge field theory. However, it is believed that the Standard Model describes physics properly only up to a certain energy scale. This scale cannot be much larger than the so-called electroweak scale, i.e., the masses of the gauge fields W^+- and Z^0. Beyond this scale, the Standard Model has to be modified. In this dissertation, supersymmetric theories are used to tackle the problems of the Standard Model. For example, the quadratic divergences, which plague the Higgs boson mass in the Standard model, cancel in supersymmetric theories. Experimental facts concerning the neutrino sector indicate that the lepton number is violated in Nature. On the other hand, the lepton number violating Majorana neutrino masses can induce sneutrino-antisneutrino oscillations in any supersymmetric model. In this dissertation, I present some viable signals for detecting the sneutrino-antisneutrino oscillation at colliders. At the e-gamma collider (at the International Linear Collider), the numbers of the electron-sneutrino-antisneutrino oscillation signal events are quite high, and the backgrounds are quite small. A similar study for the LHC shows that, even though there are several backrounds, the sneutrino-antisneutrino oscillations can be detected. A useful asymmetry observable is introduced and studied. Usually, the oscillation probability formula where the sneutrinos are produced at rest is used. However, here, we study a general oscillation probability. The Lorentz factor and the distance at which the measurement is made inside the detector can have effects, especially when the sneutrino decay width is very small. These effects are demonstrated for a certain scenario at the LHC.