Agreeable Agreement : An Examination into the Quest for a Solid Consensus in Light of Bilateral Doctrinal Dialogues among Anglicans, Lutherans and Roman Catholics

The purpose of this study is to analyse the development and understanding of the idea of consensus in bilateral dialogues among Anglicans, Lutherans and Roman Catholics. The source material consists of representative dialogue documents from the international, regional and national dialogues from the 1960s until 2006. In general, the dialogue documents argue for agreement/consensus based on commonality or compatibility. Each of the three dialogue processes has specific characteristics and formulates its argument in a unique way. The Lutheran-Roman Catholic dialogue has a particular interest in hermeneutical questions. In the early phases, the documents endeavoured to describe the interpretative principles that would allow the churches to together proclaim the Gospel and to identify the foundation on which the agreement in the church is based. This investigation ended up proposing a notion of basic consensus , which later developed into a form of consensus that seeks to embrace, not to dismiss differences (so-called differentiated consensus ). The Lutheran-Roman Catholic agreement is based on a perspectival understanding of doctrine. The Anglican-Roman Catholic dialogue emphasises the correctness of interpretations. The documents consciously look towards a common future , not the separated past. The dialogue s primary interpretative concept is koinonia. The texts develop a hermeneutics of authoritative teaching that has been described as the rule of communion . The Anglican-Lutheran dialogue is characterised by an instrumental understanding of doctrine. Doctrinal agreement is facilitated by the ideas of coherence, continuity and substantial emphasis in doctrine. The Anglican-Lutheran dialogue proposes a form of sufficient consensus that considers a wide set of doctrinal statements and liturgical practices to determine whether an agreement has been reached to the degree that, although not complete , is sufficient for concrete steps towards unity. Chapter V discusses the current challenges of consensus as an ecumenically viable concept. In this part, I argue that the acceptability of consensus as an ecumenical goal is based not only the understanding of the church but more importantly on the understanding of the nature and function of the doctrine. The understanding of doctrine has undergone significant changes during the time of the ecumenical dialogues. The major shift has been from a modern paradigm towards a postmodern paradigm. I conclude with proposals towards a way to construct a form of consensus that would survive philosophical criticism, would be theologically valid and ecumenically acceptable.

Self-assembly of hydrophobin proteins from the fungus Trichoderma reesei

Hydrophobins are small surface active proteins that are produced by filamentous fungi. The surface activity of hydrophobin proteins leads to the formation of a film at the air-water interface and adsorption to surfaces. The formation of these hydrophobin films and coatings is important in many stages of fungal development. Furthermore, these properties make hydrophobins interesting for potential use in technical applications. The surfactant-like properties of hydrophobins from Trichoderma reesei were studied at the air-water interface, at solid surfaces, and in solution. The hydrophobin HFBI was observed to spontaneously form a cohesive film on a water drop. The film was imaged using atomic force microscopy from both sides, revealing a monomolecular film with a defined molecular structure. The use of hydrophobins as surface immobilization carriers for enzymes was studied using fusion proteins of HFBI or HFBII and an enzyme. Furthermore, sitespecifically modified variants of HFBI were shown to retain their ability to selfassemble at interfaces and to be able to bind a second layer of proteins by biomolecular recognition. In order to understand the function of hydrophobins at interfaces, an understanding of their overall behavior and self-assembly is needed. HFBI and HFBII were shown to associate in solution into dimers and tetramers in a concentration-dependent manner. The association dynamics and protein-protein interactions of HFBI and HFBII were studied using Förster resonance energy transfer and size exclusion chromatography. It was shown that the surface activity of HFBI is not directly dependent on the formation of multimers in solution.

Bone Health in Children and Adolescents with Juvenile Idiopathic Arthritis and Solid Organ Transplant

Osteoporosis is a skeletal disorder characterized by compromised bone strength that predisposes to increased fracture risk. Childhood and adolescence are critical periods for bone mass gain. Peak bone mass is mostly acquired by the age of 18 years and is an important determinant of adult bone health and lifetime risk for fractures. Medications, especially glucocorticoids (GCs), chronic inflammation, decreased physical activity, hormonal deficiencies, delayed puberty, and poor nutrition may predispose children and adolescents with a chronic disease to impaired bone health. In this work, we studied overall bone health, the incidence and prevalence of fractures in children and adolescents who were treated for juvenile idiopathic arthritis (JIA) or had undergone solid organ transplantation. The first study cohort included 62 patients diagnosed with JIA and treated with GCs. The epidemiology of fractures after transplantation was investigated in 196 patients and a more detailed analysis of bone health determinants was performed on 40 liver (LTx) and 106 renal (RTx) transplantation patients. Bone mineral density (BMD) and vertebral morphology were assessed by dual-energy x-ray absorptiometry. Standard radiographs were obtained to detect vertebral fractures and to determine bone age; BMD values were adjusted for skeletal maturity. Our study showed that median BMD values were subnormal in all patient cohorts. The values were highest in patients with JIA and lowest in patients with LTx. Age at transplantation influenced BMD values in LTx but not RTx patients; BMD values were higher in patients who had LTx before the age of two years. BMD was lowest during the immediate posttransplantation years and increased subnormally during puberty. Delayed skeletal maturation was common in all patient groups. The prevalence of vertebral fractures ranged from 10% to 19% in the cohorts. Most of the fractures were asymptomatic and diagnosed only at screening. Vertebral fractures were most common in LTx patients. Vitamin D deficiency was common in all patient groups, and only 3% of patients with JIA and 25% of transplantation patients were considered to have adequate serum vitamin D levels. The total cumulative weight-adjusted dose of GC was not associated with BMD values in JIA or LTx patients. The combination of female gender and age over 15 years, parathyroid hormone concentration over 100 ng/L, and cumulative weight-adjusted methylprednisolone dose over 150 mg/kg during the three preceding years were found to be important predictors for low lumbar spine BMD in RTx patients. Based on the high prevalence of osteoporosis in the study cohorts more efforts should be put to prevention and early diagnosis of osteoporosis in these pediatric patients.

Dynamics of free-running, pump-modulated and coupled semiconductor and solid-state lasers

The output of a laser is a high frequency propagating electromagnetic field with superior coherence and brightness compared to that emitted by thermal sources. A multitude of different types of lasers exist, which also translates into large differences in the properties of their output. Moreover, the characteristics of the electromagnetic field emitted by a laser can be influenced from the outside, e.g., by injecting an external optical field or by optical feedback. In the case of free-running solitary class-B lasers, such as semiconductor and Nd:YVO4 solid-state lasers, the phase space is two-dimensional, the dynamical variables being the population inversion and the amplitude of the electromagnetic field. The two-dimensional structure of the phase space means that no complex dynamics can be found. If a class-B laser is perturbed from its steady state, then the steady state is restored after a short transient. However, as discussed in part (i) of this Thesis, the static properties of class-B lasers, as well as their artificially or noise induced dynamics around the steady state, can be experimentally studied in order to gain insight on laser behaviour, and to determine model parameters that are not known ab initio. In this Thesis particular attention is given to the linewidth enhancement factor, which describes the coupling between the gain and the refractive index in the active material. A highly desirable attribute of an oscillator is stability, both in frequency and amplitude. Nowadays, however, instabilities in coupled lasers have become an active area of research motivated not only by the interesting complex nonlinear dynamics but also by potential applications. In part (ii) of this Thesis the complex dynamics of unidirectionally coupled, i.e., optically injected, class-B lasers is investigated. An injected optical field increases the dimensionality of the phase space to three by turning the phase of the electromagnetic field into an important variable. This has a radical effect on laser behaviour, since very complex dynamics, including chaos, can be found in a nonlinear system with three degrees of freedom. The output of the injected laser can be controlled in experiments by varying the injection rate and the frequency of the injected light. In this Thesis the dynamics of unidirectionally coupled semiconductor and Nd:YVO4 solid-state lasers is studied numerically and experimentally.

Polymeereillä stabiloitu amorfinen formulaatio

Nowadays growing number of new active pharmaceutical ingredients (API) have large molecular weight and are hydrophobic. The energy of their crystal lattice is bigger and polarity has decreased. This leads to weakened solubility and dissolution rate of the drug. These properties can be enhanced for example by amorphization. Amorphous form has the best dissolution rate in the solid state. In the amorphous form drug molecules are randomly arranged, so the energy required to dissolve molecules is lower compared to the crystalline counterpart. The disadvantage of amorphous form is that it is unstable. Amorphous form tends to crystallize. Stability of amorphous form can be enhanced by adding an adjuvant to drug product. Adjuvant is usually a polymer. Polymers prevent crystallization both by forming bonds with API molecules and by steric hindrance. The key thing in stabilizing amorphous form is good miscibility between API and polymer. They have to be mixed in a molecular level so that the polymer is able to prevent crystallization. The aim of this work was to study miscibility of drug and polymer and stability of their dispersion with different analytical methods. Amorphous dispersions were made by rotary evaporator and freeze dryer. Amorphicity was confirmed with X-ray powder diffraction (XRPD) right after preparation. Itraconazole and theophylline were the chosen molecules to be stabilized. Itraconazole was expected to be easier and theophylline more difficult to stabilize. Itraconazole was stabilized with HPMC and theophylline was stabilized with PVP. Miscibility was studied with XRPD and differential scanning calorimetry (DSC). In addition it was studied with polarized light microscope if miscibility was possible to see visually. Dispersions were kept in stressed conditions and the crystallization was analyzed with XRPD. Stability was also examined with isothermal microcalorimetry (IMC). The dispersion of itraconazole and theophylline 40/60 (w/w) was completely miscible. It was proved by linear combination of XRPD results and single glass transition temperature in DSC. Homogenic well mixed film was observed with light microscope. Phase separation was observed with other compositions. Dispersions of theophylline and PVP mixed only partly. Stability of itraconazole dispersions were better than theophylline dispersions which were mixed poorer. So miscibility was important thing considering stability. The results from isothermal microcalorimetry were similar to results from conventional stability studies. Complementary analytical methods should be used when studying miscibility so that the results are more reliable. Light microscope is one method in addition to mostly used XRPD and DSC. Analyzing light microscope photos is quite subjective but it gives an idea of miscibility. Isothermal microcalorimetry can be one option for conventional stability studies. If right conditions can be made where the crystallization is not too fast, it may be possible to predict stability with isothermal microcalorimetry.