Features of the geomagnetic field during the Holocene and Proterozoic

The geomagnetic field is one of the most fundamental geophysical properties of the Earth and has significantly contributed to our understanding of the internal structure of the Earth and its evolution. Paleomagnetic and paleointensity data have been crucial in shaping concepts like continental drift, magnetic reversals, as well as estimating the time when the Earth's core and associated geodynamo processes begun. The work of this dissertation is based on reliable Proterozoic and Holocene geomagnetic field intensity data obtained from rocks and archeological artifacts. New archeomagnetic field intensity results are presented for Finland, Estonia, Bulgaria, Italy and Switzerland. The data were obtained using sophisticated laboratory setups as well as various reliability checks and corrections. Inter-laboratory comparisons between three laboratories (Helsinki, Sofia and Liverpool) were performed in order to check the reliability of different paleointensity methods. The new intensity results fill up considerable gaps in the master curves for each region investigated. In order to interpret the paleointensity data of the Holocene period, a novel and user-friendly database (GEOMAGIA50) was constructed. This provided a new tool to independently test the reliability of various techniques and materials used in paleointensity determinations. The results show that archeological artifacts, if well fired, are the most suitable materials. Also lavas yield reliable paleointensity results, although they appear more scattered. This study also shows that reliable estimates are obtained using the Thellier methodology (and its modifications) with reliability checks. Global paleointensity curves during Paleozoic and Proterozoic have several time gaps with few or no intensity data. To define the global intensity behavior of the Earth's magnetic field during these times new rock types (meteorite impact rocks) were investigated. Two case histories are presented. The Ilyinets (Ukraine) impact melt rocks yielded a reliable paleointensity value at 440 Ma (Silurian), whereas the results from Jänisjärvi impact melts (Russian Karelia, ca. 700 Ma) might be biased towards high intensity values because of non-ideal magnetic mineralogy. The features of the geomagnetic field at 1.1 Ga are not well defined due to problems related to reversal asymmetries observed in Keweenawan data of the Lake Superior region. In this work new paleomagnetic, paleosecular variation and paleointensity results are reported from coeval diabases from Central Arizona and help understanding the asymmetry. The results confirm the earlier preliminary observations that the asymmetry is larger in Arizona than in Lake Superior area. Two of the mechanisms proposed to explain the asymmetry remain plausible: the plate motion and the non-dipole influence.

Aerosol Particle Formation: Meteorological and Synoptic Processes behind the Event

Aerosol particles in the atmosphere are known to significantly influence ecosystems, to change air quality and to exert negative health effects. Atmospheric aerosols influence climate through cooling of the atmosphere and the underlying surface by scattering of sunlight, through warming of the atmosphere by absorbing sun light and thermal radiation emitted by the Earth surface and through their acting as cloud condensation nuclei. Aerosols are emitted from both natural and anthropogenic sources. Depending on their size, they can be transported over significant distances, while undergoing considerable changes in their composition and physical properties. Their lifetime in the atmosphere varies from a few hours to a week. New particle formation is a result of gas-to-particle conversion. Once formed, atmospheric aerosol particles may grow due to condensation or coagulation, or be removed by deposition processes. In this thesis we describe analyses of air masses, meteorological parameters and synoptic situations to reveal conditions favourable for new particle formation in the atmosphere. We studied the concentration of ultrafine particles in different types of air masses, and the role of atmospheric fronts and cloudiness in the formation of atmospheric aerosol particles. The dominant role of Arctic and Polar air masses causing new particle formation was clearly observed at Hyytiälä, Southern Finland, during all seasons, as well as at other measurement stations in Scandinavia. In all seasons and on multi-year average, Arctic and North Atlantic areas were the sources of nucleation mode particles. In contrast, concentrations of accumulation mode particles and condensation sink values in Hyytiälä were highest in continental air masses, arriving at Hyytiälä from Eastern Europe and Central Russia. The most favourable situation for new particle formation during all seasons was cold air advection after cold-front passages. Such a period could last a few days until the next front reached Hyytiälä. The frequency of aerosol particle formation relates to the frequency of low-cloud-amount days in Hyytiälä. Cloudiness of less than 5 octas is one of the factors favouring new particle formation. Cloudiness above 4 octas appears to be an important factor that prevents particle growth, due to the decrease of solar radiation, which is one of the important meteorological parameters in atmospheric particle formation and growth. Keywords: Atmospheric aerosols, particle formation, air mass, atmospheric front, cloudiness

Investigations of planetary boundary layer processes and particle formation in the atmosphere of planet Mars

The planet Mars is the Earth's neighbour in the Solar System. Planetary research stems from a fundamental need to explore our surroundings, typical for mankind. Manned missions to Mars are already being planned, and understanding the environment to which the astronauts would be exposed is of utmost importance for a successful mission. Information of the Martian environment given by models is already now used in designing the landers and orbiters sent to the red planet. In particular, studies of the Martian atmosphere are crucial for instrument design, entry, descent and landing system design, landing site selection, and aerobraking calculations. Research of planetary atmospheres can also contribute to atmospheric studies of the Earth via model testing and development of parameterizations: even after decades of modeling the Earth's atmosphere, we are still far from perfect weather predictions. On a global level, Mars has also been experiencing climate change. The aerosol effect is one of the largest unknowns in the present terrestrial climate change studies, and the role of aerosol particles in any climate is fundamental: studies of climate variations on another planet can help us better understand our own global change. In this thesis I have used an atmospheric column model for Mars to study the behaviour of the lowest layer of the atmosphere, the planetary boundary layer (PBL), and I have developed nucleation (particle formation) models for Martian conditions. The models were also coupled to study, for example, fog formation in the PBL. The PBL is perhaps the most significant part of the atmosphere for landers and humans, since we live in it and experience its state, for example, as gusty winds, nightfrost, and fogs. However, PBL modelling in weather prediction models is still a difficult task. Mars hosts a variety of cloud types, mainly composed of water ice particles, but also CO2 ice clouds form in the very cold polar night and at high altitudes elsewhere. Nucleation is the first step in particle formation, and always includes a phase transition. Cloud crystals on Mars form from vapour to ice on ubiquitous, suspended dust particles. Clouds on Mars have a small radiative effect in the present climate, but it may have been more important in the past. This thesis represents an attempt to model the Martian atmosphere at the smallest scales with high resolution. The models used and developed during the course of the research are useful tools for developing and testing parameterizations for larger-scale models all the way up to global climate models, since the small-scale models can describe processes that in the large-scale models are reduced to subgrid (not explicitly resolved) scale.

Dynamical processes in the stratosphere and upper troposphere and their influence on the distribution of trace gases in the polar atmosphere

Transport plays an important role in the distribution of long-lived gases such as ozone and water vapour in the atmosphere. Understanding of observed variability in these gases as well as prediction of the future changes depends therefore on our knowledge of the relevant atmospheric dynamics. This dissertation studies certain dynamical processes in the stratosphere and upper troposphere which influence the distribution of ozone and water vapour in the atmosphere. The planetary waves that originate in the troposphere drive the stratospheric circulation. They influence both the meridional transport of substances as well as parameters of the polar vortices. In turn, temperatures inside the polar vortices influence abundance of the Polar Stratospheric Clouds (PSC) and therefore the chemical ozone destruction. Wave forcing of the stratospheric circulation is not uniform during winter. The November-December averaged stratospheric eddy heat flux shows a significant anticorrelation with the January-February averaged eddy heat flux in the midlatitude stratosphere and troposphere. These intraseasonal variations are attributable to the internal stratospheric vacillations. In the period 1979-2002, the wave forcing exhibited a negative trend which was confined to the second half of winter only. In the period 1958-2002, area, strength and longevity of the Arctic polar vortices do not exhibit significant long-term changes while the area with temperatures lower than the threshold temperature for PSC formation shows statistically significant increase. However, the Arctic vortex parameters show significant decadal changes which are mirrored in the ozone variability. Monthly ozone tendencies in the Northern Hemisphere show significant correlations (|r|=0.7) with proxies of the stratospheric circulation. In the Antarctic, the springtime vortex in the lower stratosphere shows statistically significant trends in temperature, longevity and strength (but not in area) in the period 1979-2001. Analysis of the ozone and water vapour vertical distributions in the Arctic UTLS shows that layering below and above the tropopause is often associated with poleward Rossby wave-breaking. These observations together with calculations of cross-tropopause fluxes emphasize the importance of poleward Rossby wave breaking for the stratosphere-troposphere exchange in the Arctic.

Hard Custom, Hard Dance : Social Organisation, (Un)Differentiation and Notions of Power in a Tabiteuean Community, Southern Kiribati

Hard Custom, Hard Dance: Social Organisation, (Un)Differentiation and Notions of Power in a Tabiteuean Community, Southern Kiribati is an ethnographic study of a village community. This work analyses social organisation on the island of Tabiteuea in the Micronesian state of Kiribati, examining the intertwining of hierarchical and egalitarian traits, meanwhile bringing a new perspective to scholarly discussions of social differentiation by introducing the concept of undifferentiation to describe non-hierarchical social forms and practices. Particular attention is paid to local ideas concerning symbolic power, abstractly understood as the potency for social reproduction, but also examined in one of its forms; authority understood as the right to speak. The workings of social differentiation and undifferentiation in the village are specifically studied in two contexts connected by local notions of power: the meetinghouse institution (te maneaba) and traditional dancing (te mwaie). This dissertation is based on 11 months of anthropological fieldwork in 1999‒2000 in Kiribati and Fiji, with an emphasis on participant observation and the collection of oral tradition (narratives and songs). The questions are approached through three distinct but interrelated topics: (i) A key narrative of the community ‒ the story of an ancestor without descendants ‒ is presented and discussed, along with other narratives. (ii) The Kiribati meetinghouse institution, te maneaba, is considered in terms of oral tradition as well as present-day practices and customs. (iii) Kiribati dancing (te mwaie) is examined through a discussion of competing dance groups, followed by an extended case study of four dance events. In the course of this work the community of close to four hundred inhabitants is depicted as constructed primarily of clans and households, but also of churches, work co-operatives and dance groups, but also as a significant and valued social unit in itself, and a part of the wider island district. In these partly cross-cutting and overlapping social matrices, people are alternatingly organised by the distinct values and logic of differentiation and undifferentiation. At different levels of social integration and in different modes of social and discursive practice, there are heightened moments of differentiation, followed by active undifferentiation. The central notions concerning power and authority to emerge are, firstly, that in order to be valued and utilised, power needs to be controlled. Secondly, power is not allowed to centralize in the hands of one person or group for any long period of time. Thirdly, out of the permanent reach of people, power/authority is always, on the one hand, left outside the factual community and, on the other, vested in community, the social whole. Several forms of differentiation and undifferentiation emerge, but these appear to be systematically related. Social differentiation building on typically Austronesian complementary differences (such as male:female, elder:younger, autochtonous:allotochtonous) is valued, even if eventually restricted, whereas differentiation based on non-complementary differences (such as monetary wealth or level of education) is generally resisted, and/or is subsumed by the complementary distinctions. The concomitant forms of undifferentiation are likewise hierarchically organised. On the level of the society as a whole, undifferentiation means circumscribing and ultimately withholding social hierarchy. Potential hierarchy is both based on a combination of valued complementary differences between social groups and individuals, but also limited by virtue of the undoing of these differences; for example, in the dissolution of seniority (elder-younger) and gender (male-female) into sameness. Like the suspension of hierarchy, undifferentiation as transformation requires the recognition of pre-existing difference and does not mean devaluing the difference. This form of undifferentiation is ultimately encompassed by the first one, as the processes of the differentiation, whether transformed or not, are always halted. Finally, undifferentiation can mean the prevention of non-complementary differences between social groups or individuals. This form of undifferentiation, like the differentiation it works on, takes place on a lower level of societal ideology, as both the differences and their prevention are always encompassed by the complementary differences and their undoing. It is concluded that Southern Kiribati society be seen as a combination of a severely limited and decentralised hierarchy (differentiation) and of a tightly conditional and contextual (intra-category) equality (undifferentiation), and that it is distinctly characterised by an enduring tension between these contradicting social forms and cultural notions. With reference to the local notion of hardness used to characterise custom on this particular island as well as dance in general, it is argued in this work that in this Tabiteuean community some forms of differentiation are valued though strictly delimited or even undone, whereas other forms of differentiation are a perceived as a threat to community, necessitating pre-emptive imposition of undifferentiation. Power, though sought after and displayed - particularly in dancing - must always remain controlled.

Ultrastructure of Biofilms Formed by Bacteria from Industrial Processes

Microorganisms exist predominantly as sessile multispecies communities in natural habitats. Most bacterial species can form these matrix-enclosed microbial communities called biofilms. Biofilms occur in a wide range of environments, on every surface with sufficient moisture and nutrients, also on surfaces in industrial settings and engineered water systems. This unwanted biofilm formation on equipment surfaces is called biofouling. Biofouling can significantly decrease equipment performance and lifetime and cause contamination and impaired quality of the industrial product. In this thesis we studied bacterial adherence to abiotic surfaces by using coupons of stainless steel coated or not coated with fluoropolymer or diamond like carbon (DLC). As model organisms we used bacterial isolates from paper machines (Meiothermus silvanus, Pseudoxanthomonas taiwanensis and Deinococcus geothermalis) and also well characterised species isolated from medical implants (Staphylococcus epidermidis). We found that coating of steel surface with these materials reduced its tendency towards biofouling: Fluoropolymer and DLC coatings repelled all four biofilm formers on steel. We found great differences between bacterial species in their preference of surfaces to adhere as well as their ultrastructural details, like number and thickness of adhesion organelles they expressed. These details responded differently towards the different surfaces they adhered to. We further found that biofilms of D. geothermalis formed on titanium dioxide coated coupons of glass, steel and titanium, were effectively removed by photocatalytic action in response to irradiation at 360 nm. However, on non-coated glass or steel surfaces irradiation had no detectable effect on the amount of bacterial biomass. We showed that the adhesion organelles of bacteria on illuminated TiO2 coated coupons were complety destroyed whereas on non-coated coupons they looked intact when observed by microscope. Stainless steel is the most widely used material for industrial process equipments and surfaces. The results in this thesis showed that stainless steel is prone to biofouling by phylogenetically distant bacterial species and that coating of the steel may offer a tool for reduced biofouling of industrial equipment. Photocatalysis, on the other hand, is a potential technique for biofilm removal from surfaces in locations where high level of hygiene is required. Our study of natural biofilms on barley kernel surfaces showed that also there the microbes possessed adhesion organelles visible with electronmicroscope both before and after steeping. The microbial community of dry barley kernels turned into a dense biofilm covered with slimy extracellular polymeric substance (EPS) in the kernels after steeping in water. Steeping is the first step in malting. We also presented evidence showing that certain strains of Lactobacillus plantarum and Wickerhamomyces anomalus, when used as starter cultures in the steeping water, could enter the barley kernel and colonise the tissues of the barley kernel. By use of a starter culture it was possible to reduce the extensive production of EPS, which resulted in a faster filtration of the mash.

Canopy processes, fluxes and microclimate in a pine forest

Interaction between forests and the atmosphere occurs by radiative and turbulent transport. The fluxes of energy and mass between surface and the atmosphere directly influence the properties of the lower atmosphere and in longer time scales the global climate. Boreal forest ecosystems are central in the global climate system, and its responses to human activities, because they are significant sources and sinks of greenhouse gases and of aerosol particles. The aim of the present work was to improve our understanding on the existing interplay between biologically active canopy, microenvironment and turbulent flow and quantify. In specific, the aim was to quantify the contribution of different canopy layers to whole forest fluxes. For this purpose, long-term micrometeorological and ecological measurements made in a Scots pine (Pinus sylvestris) forest at SMEAR II research station in Southern Finland were used. The properties of turbulent flow are strongly modified by the interaction between the canopy elements: momentum is efficiently absorbed in the upper layers of the canopy, mean wind speed and turbulence intensities decrease rapidly towards the forest floor and power spectra is modulated by spectral short-cut . In the relative open forest, diabatic stability above the canopy explained much of the changes in velocity statistics within the canopy except in strongly stable stratification. Large eddies, ranging from tens to hundred meters in size, were responsible for the major fraction of turbulent transport between a forest and the atmosphere. Because of this, the eddy-covariance (EC) method proved to be successful for measuring energy and mass exchange inside a forest canopy with exception of strongly stable conditions. Vertical variations of within canopy microclimate, light attenuation in particular, affect strongly the assimilation and transpiration rates. According to model simulations, assimilation rate decreases with height more rapidly than stomatal conductance (gs) and transpiration and, consequently, the vertical source-sink distributions for carbon dioxide (CO2) and water vapor (H2O) diverge. Upscaling from a shoot scale to canopy scale was found to be sensitive to chosen stomatal control description. The upscaled canopy level CO2 fluxes can vary as much as 15 % and H2O fluxes 30 % even if the gs models are calibrated against same leaf-level dataset. A pine forest has distinct overstory and understory layers, which both contribute significantly to canopy scale fluxes. The forest floor vegetation and soil accounted between 18 and 25 % of evapotranspiration and between 10 and 20 % of sensible heat exchange. Forest floor was also an important deposition surface for aerosol particles; between 10 and 35 % of dry deposition of particles within size range 10 30 nm occurred there. Because of the northern latitudes, seasonal cycle of climatic factors strongly influence the surface fluxes. Besides the seasonal constraints, partitioning of available energy to sensible and latent heat depends, through stomatal control, on the physiological state of the vegetation. In spring, available energy is consumed mainly as sensible heat and latent heat flux peaked about two months later, in July August. On the other hand, annual evapotranspiration remains rather stable over range of environmental conditions and thus any increase of accumulated radiation affects primarily the sensible heat exchange. Finally, autumn temperature had strong effect on ecosystem respiration but its influence on photosynthetic CO2 uptake was restricted by low radiation levels. Therefore, the projected autumn warming in the coming decades will presumably reduce the positive effects of earlier spring recovery in terms of carbon uptake potential of boreal forests.

Searching the inclusive ℓγE̸T+b-quark signature for radiative top quark decay and non-standard-model processes

In a search for new phenomena in a signature suppressed in the standard model of elementary particles (SM), we compare the inclusive production of events containing a lepton, a photon, significant transverse momentum imbalance (MET), and a jet identified as containing a b-quark, to SM predictions. The search uses data produced in proton-antiproton collisions at 1.96 TeV corresponding to 1.9 fb-1 of integrated luminosity taken with the CDF detector at the Fermilab Tevatron. We find 28 lepton+photon+MET+b events versus an expectation of 31.0+4.1/-3.5 events. If we further require events to contain at least three jets and large total transverse energy, simulations predict that the largest SM source is top-quark pair production with an additional radiated photon, ttbar+photon. In the data we observe 16 ttbar+photon candidate events versus an expectation from SM sources of 11.2+2.3/-2.1. Assuming the difference between the observed number and the predicted non-top-quark total is due to SM top quark production, we estimate the ttg cross section to be 0.15 +- 0.08 pb.

Global processes, local strategies : migration of educated Dominicans.

The aim of this thesis is to examine migration of educated Dominicans in light of global processes. Current global developments have resulted in increasingly global movements of people, yet people tend to come from certain places in large numbers rather than others. At the same time, international migration is increasingly selective, which shows in the disproportional number of educated migrants. This study discovers individual and societal motivations that explain why young educated Dominicans decide to migrate and return. The theoretical framework of this thesis underlines that migration is a dynamic process rooted in other global developments. Migratory movements should be seen as a result of interacting macro- and microstructures, which are linked by a number of intermediate mechanisms, meso-structures. The way individuals perceive opportunity structures concretises the way global developments mediate to the micro-level. The case of the Dominican Republic shows that there is a diversity of local responses to the world system, as Dominicans have produced their own unique historical responses to global changes. The thesis explains that Dominican migration is importantly conditioned by socioeconomic and educational background. Migration is more accessible for the educated middle class, because of the availability of better resources. Educated migrants also seem less likely to rely on networks to organize their migrations. The role of networks in migration differs by socioeconomic background on the one hand, and by the specific connections each individual has to current and previous migrants on the other hand. The personal and cultural values of the migrant are also pivotal. The central argument of this thesis is that a veritable culture of migration has evolved in the Dominican Republic. The actual economic, political and social circumstances have led many Dominicans to believe that there are better opportunities elsewhere. The globalisation of certain expectations on the one hand, and the development of the specifically Dominican feeling of ‘externalism’ on the other, have for their part given rise to the Dominican culture of migration. The study also suggests that the current Dominican development model encourages migration. Besides global structures, local structures are found to ve pivotal in determining how global processes are materialised in a specific place. The research for this thesis was conducted by using qualitative methodology. The focus of this thesis was on thematic interviews that reveal the subject’s point of view and give a fuller understanding of migration and mobility of the educated. The data was mainly collected during a field research phase in Santo Domingo, the Dominican Republic in December 2009 and January 2010. The principal material consists of ten thematic interviews held with educated Dominican current or former migrants. Four expert interviews, relevant empirical data, theoretical literature and newspaper articles were also comprehensively used.

Psychosocial processes of health behaviour change in a lifestyle intervention : Influences of gender, socioeconomic status and personality

Background: The onset of many chronic diseases such as type 2 diabetes can be delayed or prevented by changes in diet, physical activity and obesity. Known predictors of successful behaviour change include psychosocial factors such as selfefficacy, action and coping planning, and social support. However, gender and socioeconomic differences in these psychosocial mechanisms underlying health behaviour change have not been examined, despite well-documented sociodemographic differences in lifestyle-related mortality and morbidity. Additionally, although stable personality traits (such as dispositional optimism or pessimism and gender-role orientation: agency and communion) are related to health and health behaviour, to date they have rarely been studied in the context of health behaviour interventions. These personality traits might contribute to health behaviour change independently of the more modifiable domain-specific psychosocial factors, or indirectly through them, or moderated by them. The aims were to examine in an intervention setting: (1) whether changes (during the three-month intervention) in psychological determinants (self-efficacy beliefs, action planning and coping planning) predict changes in exercise and diet behaviours over three months and 12 months, (2) the universality assumption of behaviour change theories, i.e. whether preintervention levels and changes in psychosocial determinants are similar among genders and socioeconomic groups, and whether they predict changes in behaviour in a similar way in these groups, (3) whether the personality traits optimism, pessimism, agency and communion predict changes in abdominal obesity, and the nature of their interplay with modifiable and domain-specific psychosocial factors (self-efficacy and social support). Methods: Finnish men and women (N = 385) aged 50 65 years who were at an increased risk for type 2 diabetes were recruited from health care centres to participate in the GOod Ageing in Lahti Region (GOAL) Lifestyle Implementation Trial. The programme aimed to improve participants lifestyle (physical activity, eating) and decrease their overweight. The measurements of self-efficacy, planning, social support and dispositional optimism/pessimism were conducted pre-intervention at baseline (T1) and after the intensive phase of the intervention at three months (T2), and the measurements of exercise at T1, T2 and 12 months (T3) and healthy eating at T1 and T3. Waist circumference, an indicator of abdominal obesity, was measured at T1 and at oneyear (T3) and three-year (T4) follow-ups. Agency and communion were measured at T4 with the Personal Attributes Questionnaire (PAQ). Results: (1) Increases in self-efficacy and planning were associated with three-month increases in exercise (Study I). Moreover, both the post-intervention level and three-month increases (during the intervention) in self-efficacy in dealing with barriers predicted the 12-month increase in exercise, and a high postintervention level of coping plans predicted the 12-month decrease in dietary fat (Study II). One- and three-year waist circumference reductions were predicted by the initial three-month increase in self-efficacy (Studies III, IV). (2) Post-intervention at three months, women had formed more action plans for changing their exercise routines and received less social support for behaviour change than men had. The effects of adoption self-efficacy were similar but change in planning played a less significant role among men (Study I). Examining the effects of socioeconomic status (SES), psychosocial determinants at baseline and their changes during the intervention yielded largely similar results. Exercise barriers self-efficacy was enhanced slightly less among those with low SES. Psychosocial determinants predicted behaviour similarly across all SES groups (Study II). (3) Dispositional optimism and pessimism were unrelated to waist circumference change, directly or indirectly, and they did not influence changes in self-efficacy (Study III). Agency predicted 12-month waist circumference reduction among women. High communion coupled with high social support was associated with waist circumference reduction. However, the only significant predictor of three-year waist circumference reduction was an increase in health-related self-efficacy during the intervention (Study IV). Conclusions: Interventions should focus on improving participants self-efficacy early on in the intervention as well as prompting action and coping planning for health behaviour change. Such changes are likely to be similarly effective among intervention participants regardless of gender and educational level. Agentic orientation may operate via helping women to be less affected by the demands of the self-sacrificing female role and enabling them to assertively focus on their own goals. The earlier mixed results regarding the role of social support in behaviour change may be in part explained by personality traits such as communion.

Ways of Explaining Workplace Bullying: A Review of Enabling, Motivating, and Precipitating Structures and Processes in the Work Environment

This paper summarizes literature explaining workplace bullying and focuses on organisational antecedents of bullying. In order to better understand the logic behind bullying, a model discussing different types of explanations is put forward. Thus, explanations for and factors associated with bullying are classified into three groups, i.e. enabling structures or necessary antecedents (e.g. perceived power imbalances, low perceived costs, and dissatisfaction and frustration), motivating structures or incentives (e.g. internal competition, reward systems, and expected benefits), and precipitating processes or triggering circumstances (e.g. downsizing and restructuring, organisational changes, changes in the composition of the workgroup). The paper concludes that bullying is often an interaction between structures and processes from all three groupings.

When sharing becomes a liability: An intellectual capital approach to describing the dichotomy of knowledge protection versus sharing in intra- and interorganizational relationships

The tension created when companies are collaborating with competitors – sometimes termed co-opetition - has been subject of research within the network approach. As companies are collaborating with competitors, they need to simultaneously share and protect knowledge. The opportunistic behavior and learning intent of the partner may be underestimated, and collaboration may involve significant risks of loss of competitive edge. Contrastingly, the central tenet within the Intellectual Capital approach is that knowledge grows as it flows. The person sharing does not lose the knowledge and therefore knowledge has doubled from a company’s point of view. Value is created through the interplay of knowledge flows between and within three forms of intellectual capital: human, structural and relational capital. These are the points of departure for the research conducted in this thesis. The thesis investigates the tension between collaboration and competition through an Intellectual Capital lens, by identifying the actions taken to share and protect knowledge in interorganizational collaborative relationships. More specifically, it explores the tension in knowledge flows aimed at protecting and sharing knowledge, and their effect on the value creation of a company. It is assumed, that as two companies work closely together, the collaborative relationship becomes intertwined between the two partners and the intellectual capital flows of both companies are affected. The research finds that companies commonly protect knowledge also in close and long-term collaborative relationships. The knowledge flows identified are both collaborative and protective, with the result that they sometimes are counteracting and neutralize each other. The thesis contributes to the intellectual capital approach by expanding the understanding of knowledge protection in interorganizational relationships in three ways. First, departing from the research on co-opetition it shifts the focus from the internal view of the company as a repository of intellectual capital onto the collaborative relationships between competing companies. Second, instead of the traditional collaborative and sharing point of departure, it takes a competitive and protective perspective. Third, it identifies the intellectual capital flows as assets or liabilities depending on their effect on the value creation of the company. The actions taken to protect knowledge in an interorganizational relationship may decrease the value created in the company, which would make them liabilities.

From Creative Ideas to New Emerging Ventures: Entrepreneurial Processes among Finnish Design Entrepreneurs

This study focuses on self-employed industrial designers and how they emerge new venture ideas. More specifically, this study strives to determine what design entrepreneurs do when they create new venture ideas, how venture ideas are nurtured into being, and how the processes are organized to bring such ideas to the market in the given industrial context. In contemporary times when the concern for the creative class is peaking, the research and business communities need more insight of the kind that this study provides, namely how professionals may contribute to their entrepreneurial processes and other agents’ business processes. On the one hand, the interviews underlying this study suggest that design entrepreneurs may act as reactive service providers who are appointed by producers or marketing parties to generate product-related ideas on their behalf. On the other hand, the interviews suggest that proactive behaviour that aims on generating own venture ideas, may force design entrepreneurs to take considerable responsibility in organizing their entrepreneurial processes. Another option is that they strive to bring venture ideas to the market in collaboration, or by passing these to other agents’ product development processes. Design entrepreneurs’ venture ideas typically emerge from design related starting points and observations. Product developers are mainly engaged with creating their own ideas, whereas service providers refer mainly to the development of other agents’ venture ideas. In contrast with design entrepreneurs, external actors commonly emphasize customer demand as their primary source for new venture ideas, as well as development of these in close interaction with available means of production and marketing. Consequently, design entrepreneurs need to address market demand since without sales their venture ideas may as well be classified as art. In case, they want to experiment with creative ideas, then there should be another source of income to support this typically uncertain and extensive process. Currently, it appears like a lot of good venture ideas and resources are being wasted, when venture ideas do not suite available production or business procedures. Sufficient communication between design entrepreneurs and other agents would assist all parties in developing production efficient and distributable venture ideas. Overall, the findings suggest that design entrepreneurs are often involved simultaneously in several processes that aim at emerging new product related ventures. Consequently, design entrepreneurship is conceptualized in this study as a dual process. This implies that design entrepreneurs can simultaneously be in charge of their entrepreneurial processes, as they operate as resources in other agents’ business processes. The interconnection between activities and agents suggests that these kinds of processes tend to be both complex and multifaceted to their nature.

Value Creation in Professional Service Processes. Propositions for Understanding Financial Value from a Customer Perspective

Many service management studies have suggested that service providers benefit from having long-term relationships with customers, but the argument from a customer perspective has been vague. However, especially in the business-to-business context, an analysis of financial value creation seems appropriate also from a customer perspective. Hence, the aim of this study is to develop a framework for understanding monetary value creation in professional service assignments from a customer perspective. The contribution of this study is an improved insight and framework for understanding financial value creation from a customer perspective in a professional service delivery process. The sources for monetary differences between transactional and long-term service providers are identified and quantified in case settings. This study contributes to the existing literature in service and relationship management by extending the customer’s viewpoint from perceived value to measurable monetary value. The contribution to the professional services lies in the process focus as opposed to the outcome focus, which is often accentuated in the existing professional services literature. The findings from the qualitative data suggest that a customer company may benefit from having an improved understanding of the service delivery (service assignment) process and the factors affecting the monetary value creation during the process. It is suggested that long-term relationships with service providers create financial value in the case settings in the short term. The findings also indicate that by using the improved understanding, a customer company can make more informed decisions when selecting a service provider for a specific assignment. Mirel Leino is associated with CERS, the Center for Relationship Marketing and Service Management at the Swedish School of Economics and Business Administration

Time Dimension in Consumers’ Image Construction Processes: Introducing Image Heritage and Image-in-use

This paper focuses on the time dimension in consumers’ image construction processes. Two new concepts are introduced to cover past consumer experiences about the company – image heritage, and the present image construction process - image-in-use. Image heritage and image-in-use captures the dynamic, relational, social, and contextual features of corporate image construction processes. Qualitative data from a retailing context were collected and analysed following a grounded theory approach. The study demonstrates that consumers’ corporate images have long roots in past experiences. Understanding consumers’ image heritage provides opportunities for understanding how consumers might interpret management initiatives and branding activities in the present.