The structure of Norway spruce (Picea abies [L.] Karst.) stems in relation to wood properties of sawn timber

An important challenge in forest industry is to get the appropriate raw material out from the forests to the wood processing industry. Growth and stem reconstruction simulators are therefore increasingly integrated in industrial conversion simulators, for linking the properties of wooden products to the three-dimensional structure of stems and their growing conditions. Static simulators predict the wood properties from stem dimensions at the end of a growth simulation period, whereas in dynamic approaches, the structural components, e.g. branches, are incremented along with the growth processes. The dynamic approach can be applied to stem reconstruction by predicting the three-dimensional stem structure from external tree variables (i.e. age, height) as a result of growth to the current state. In this study, a dynamic growth simulator, PipeQual, and a stem reconstruction simulator, RetroSTEM, are adapted to Norway spruce (Picea abies [L.] Karst.) to predict the three-dimensional structure of stems (tapers, branchiness, wood basic density) over time such that both simulators can be integrated in a sawing simulator. The parameterisation of the PipeQual and RetroSTEM simulators for Norway spruce relied on the theoretically based description of tree structure developing in the growth process and following certain conservative structural regularities while allowing for plasticity in the crown development. The crown expressed both regularity and plasticity in its development, as the vertical foliage density peaked regularly at about 5 m from the stem apex, varying below that with tree age and dominance position (Study I). Conservative stem structure was characterized in terms of (1) the pipe ratios between foliage mass and branch and stem cross-sectional areas at crown base, (2) the allometric relationship between foliage mass and crown length, (3) mean branch length relative to crown length and (4) form coefficients in branches and stem (Study II). The pipe ratio between branch and stem cross-sectional area at crown base, and mean branch length relative to the crown length may differ in trees before and after canopy closure, but the variation should be further analysed in stands of different ages and densities with varying site fertilities and climates. The predictions of the PipeQual and RetroSTEM simulators were evaluated by comparing the simulated values to measured ones (Study III, IV). Both simulators predicted stem taper and branch diameter at the individual tree level with a small bias. RetroSTEM predictions of wood density were accurate. For focusing on even more accurate predictions of stem diameters and branchiness along the stem, both simulators should be further improved by revising the following aspects in the simulators: the relationship between foliage and stem sapwood area in the upper stem, the error source in branch sizes, the crown base development and the height growth models in RetroSTEM. In Study V, the RetroSTEM simulator was integrated in the InnoSIM sawing simulator, and according to the pilot simulations, this turned out to be an efficient tool for readily producing stand scale information about stem sizes and structure when approximating the available assortments of wood products.

Management of multi-scale forest resource data over time

During the last decades there has been a global shift in forest management from a focus solely on timber management to ecosystem management that endorses all aspects of forest functions: ecological, economic and social. This has resulted in a shift in paradigm from sustained yield to sustained diversity of values, goods and benefits obtained at the same time, introducing new temporal and spatial scales into forest resource management. The purpose of the present dissertation was to develop methods that would enable spatial and temporal scales to be introduced into the storage, processing, access and utilization of forest resource data. The methods developed are based on a conceptual view of a forest as a hierarchically nested collection of objects that can have a dynamically changing set of attributes. The temporal aspect of the methods consists of lifetime management for the objects and their attributes and of a temporal succession linking the objects together. Development of the forest resource data processing method concentrated on the extensibility and configurability of the data content and model calculations, allowing for a diverse set of processing operations to be executed using the same framework. The contribution of this dissertation to the utilisation of multi-scale forest resource data lies in the development of a reference data generation method to support forest inventory methods in approaching single-tree resolution.

Econometric models of Finnish non-industrial private forest owners' timber supply and timber stock

This dissertation examines the short- and long-run impacts of timber prices and other factors affecting NIPF owners' timber harvesting and timber stocking decisions. The utility-based Faustmann model provides testable hypotheses of the exogenous variables retained in the timber supply analysis. The timber stock function, derived from a two-period biomass harvesting model, is estimated using a two-step GMM estimator based on balanced panel data from 1983 to 1991. Timber supply functions are estimated using a Tobit model adjusted for heteroscedasticity and nonnormality of errors based on panel data from 1994 to 1998. Results show that if specification analysis of the Tobit model is ignored, inconsistency and biasedness can have a marked effect on parameter estimates. The empirical results show that owner's age is the single most important factor determining timber stock; timber price is the single most important factor in harvesting decision. The results of the timber supply estimations can be interpreted using utility-based Faustmann model of a forest owner who values a growing timber in situ.

Devolution of forest-related rights: Comparative analyses of six developing countries

The study focused on the different ways that forest-related rights can be devolved to the local level according to the current legal frameworks in Laos, Nepal, Vietnam, Kenya, Mozambique and Tanzania. The eleven case studies represented the main ways in which forest-related rights can be devolved to communities or households in these countries. The objectives of this study were to 1) analyse the contents and extent of forest-related rights that can be devolved to the local level, 2) develop an empirical typology that represents the main types of devolution, and 3) compare the cases against a theoretical ideal type to assess in what way and to what extent the cases are similar to or differ from the theoretical construct. Fuzzy set theory, Qualitative Comparative Analysis and ideal type analysis were used in analysing the case studies and in developing an empirical typology. The theoretical framework, which guided data collection and analyses, was based on institutional economics and theories on property rights, common pool resources and collective action. On the basis of the theoretical and empirical knowledge, the most important attributes of rights were defined as use rights, management rights, exclusion rights, transfer rights and the duration and security of the rights. The ideal type was defined as one where local actors have been devolved comprehensive use rights, extensive management rights, rights to exclude others from the resource and rights to transfer these rights. In addition, the rights are to be secure and held perpetually. The ideal type was used to structure the analysis and as a tool against which the cases were analysed. The contents, extent and duration of the devolved rights varied greatly. In general, the results show that devolution has mainly meant the transfer of use rights to the local level, and has not really changed the overall state control over forest resources. In most cases the right holders participate, or have a limited role in the decision making regarding the harvesting and management of the resource. There was a clear tendency to devolve the rights to enforce rules and to monitor resource use and condition more extensively than the powers to decide on the management and development of the resource. The empirical typology of the cases differentiated between five different types of devolution. The types can be characterised by the devolution of 1) restricted use and control rights, 2) extensive use rights but restricted control rights, 3) extensive rights, 4) insecure, short term use and restricted control rights, and 5) insecure extensive rights. Overall, the case studies conformity to the ideal type was very low: only two cases were similar to the ideal type, all other cases differed considerably from the ideal type. The restricted management rights were the most common reason for the low conformity to the ideal type (eight cases). In three cases, the short term of the rights, restricted transfer rights, restricted use rights or restricted exclusion rights were the reason or one of the reasons for the low conformity to the ideal type. In two cases the rights were not secure.

Uncertainty in forest simulators and forest planning systems

The forest simulator is a computerized model for predicting forest growth and future development as well as effects of forest harvests and treatments. The forest planning system is a decision support tool, usually including a forest simulator and an optimisation model, for finding the optimal forest management actions. The information produced by forest simulators and forest planning systems is used for various analytical purposes and in support of decision making. However, the quality and reliability of this information can often be questioned. Natural variation in forest growth and estimation errors in forest inventory, among other things, cause uncertainty in predictions of forest growth and development. This uncertainty stemming from different sources has various undesirable effects. In many cases outcomes of decisions based on uncertain information are something else than desired. The objective of this thesis was to study various sources of uncertainty and their effects in forest simulators and forest planning systems. The study focused on three notable sources of uncertainty: errors in forest growth predictions, errors in forest inventory data, and stochastic fluctuation of timber assortment prices. Effects of uncertainty were studied using two types of forest growth models, individual tree-level models and stand-level models, and with various error simulation methods. New method for simulating more realistic forest inventory errors was introduced and tested. Also, three notable sources of uncertainty were combined and their joint effects on stand-level net present value estimates were simulated. According to the results, the various sources of uncertainty can have distinct effects in different forest growth simulators. The new forest inventory error simulation method proved to produce more realistic errors. The analysis on the joint effects of various sources of uncertainty provided interesting knowledge about uncertainty in forest simulators.

Design and testing of stand-specific bucking instructions for use on modern cut-to-length harvesters

This study addresses three important issues in tree bucking optimization in the context of cut-to-length harvesting. (1) Would the fit between the log demand and log output distributions be better if the price and/or demand matrices controlling the bucking decisions on modern cut-to-length harvesters were adjusted to the unique conditions of each individual stand? (2) In what ways can we generate stand and product specific price and demand matrices? (3) What alternatives do we have to measure the fit between the log demand and log output distributions, and what would be an ideal goodness-of-fit measure? Three iterative search systems were developed for seeking stand-specific price and demand matrix sets: (1) A fuzzy logic control system for calibrating the price matrix of one log product for one stand at a time (the stand-level one-product approach); (2) a genetic algorithm system for adjusting the price matrices of one log product in parallel for several stands (the forest-level one-product approach); and (3) a genetic algorithm system for dividing the overall demand matrix of each of the several log products into stand-specific sub-demands simultaneously for several stands and products (the forest-level multi-product approach). The stem material used for testing the performance of the stand-specific price and demand matrices against that of the reference matrices was comprised of 9 155 Norway spruce (Picea abies (L.) Karst.) sawlog stems gathered by harvesters from 15 mature spruce-dominated stands in southern Finland. The reference price and demand matrices were either direct copies or slightly modified versions of those used by two Finnish sawmilling companies. Two types of stand-specific bucking matrices were compiled for each log product. One was from the harvester-collected stem profiles and the other was from the pre-harvest inventory data. Four goodness-of-fit measures were analyzed for their appropriateness in determining the similarity between the log demand and log output distributions: (1) the apportionment degree (index), (2) the chi-square statistic, (3) Laspeyres quantity index, and (4) the price-weighted apportionment degree. The study confirmed that any improvement in the fit between the log demand and log output distributions can only be realized at the expense of log volumes produced. Stand-level pre-control of price matrices was found to be advantageous, provided the control is done with perfect stem data. Forest-level pre-control of price matrices resulted in no improvement in the cumulative apportionment degree. Cutting stands under the control of stand-specific demand matrices yielded a better total fit between the demand and output matrices at the forest level than was obtained by cutting each stand with non-stand-specific reference matrices. The theoretical and experimental analyses suggest that none of the three alternative goodness-of-fit measures clearly outperforms the traditional apportionment degree measure. Keywords: harvesting, tree bucking optimization, simulation, fuzzy control, genetic algorithms, goodness-of-fit

Owner-driven decision support in holding-specific forest planning

Socio-economic and demographic changes among family forest owners and demands for versatile forestry decision aid motivated this study, which sought grounds for owner-driven forest planning. Finnish family forest owners’ forest-related decision making was analyzed in two interview-based qualitative studies, the main findings of which were surveyed quantitatively. Thereafter, a scheme for adaptively mixing methods in individually tailored decision support processes was constructed. The first study assessed owners’ decision-making strategies by examining varying levels of the sharing of decision-making power and the desire to learn. Five decision-making modes – trusting, learning, managing, pondering, and decisive – were discerned and discussed against conformable decision-aid approaches. The second study conceptualized smooth communication and assessed emotional, practical, and institutional boosters of and barriers to such smoothness in communicative decision support. The results emphasize the roles of trust, comprehension, and contextual services in owners’ communicative decision making. In the third study, a questionnaire tool to measure owners’ attitudes towards communicative planning was constructed by using trusting, learning, and decisive dimensions. Through a multivariate analysis of survey data, three owner groups were identified as fusions of the original decision-making modes: trusting learners (53%), decisive learners (27%), and decisive managers (20%). Differently weighted communicative services are recommended for these compound wishes. The findings of the studies above were synthesized in a form of adaptive decision analysis (ADA), which allows and encourages the decision-maker (owner) to make deliberate choices concerning the phases of a decision aid (planning) process. The ADA model relies on adaptability and feedback management, which foster smooth communication with the owner and (inter-)organizational learning of the planning institution(s). The summarized results indicate that recognizing the communication-related amenity values of family forest owners may be crucial in developing planning and extension services. It is therefore recommended that owners, root-level planners, consultation professionals, and pragmatic researchers collaboratively continue to seek stable change.