Cancer survivors at work : Work-related problems and factors associated with their employment, work ability and social support from the work community

Due to the improved prognosis of many forms of cancer, an increasing number of cancer survivors are willing to return to work after their treatment. It is generally believed, however, that people with cancer are either unemployed, stay at home, or retire more often than people without cancer. This study investigated the problems that cancer survivors experience on the labour market, as well as the disease-related, sociodemographic and psychosocial factors at work that are associated with the employment and work ability of cancer survivors. The impact of cancer on employment was studied combining the data of Finnish Cancer Registry and census data of the years 1985, 1990, 1995 or 1997 of Statistics Finland. There were two data sets containing 46 312 and 12 542 people with cancer. The results showed that cancer survivors were slightly less often employed than their referents. Two to three years after the diagnosis the employment rate of the cancer survivors was 9% lower than that of their referents (64% vs. 73%), whereas the employment rate was the same before the diagnosis (78%). The employment rate varied greatly according to the cancer type and education. The probability of being employed was greater in the lower than in the higher educational groups. People with cancer were less often employed than people without cancer mainly because of their higher retirement rate (34% vs. 27%). As well as employment, retirement varied by cancer type. The risk of retirement was twofold for people having cancer of the nervous system or people with leukaemia compared to their referents, whereas people with skin cancer, for example, did not have an increased risk of retirement. The aim of the questionnaire study was to investigate whether the work ability of cancer survivors differs from that of people without cancer and whether cancer had impaired their work ability. There were 591 cancer survivors and 757 referents in the data. Even though current work ability of cancer survivors did not differ between the survivors and their referents, 26% of cancer survivors reported that their physical work ability, and 19% that their mental work ability had deteriorated due to cancer. The survivors who had other diseases or had had chemotherapy, most often reported impaired work ability, whereas survivors with a strong commitment to their work organization, or a good social climate at work, reported impairment less frequently. The aim of the other questionnaire study containing 640 people with the history of cancer was to examine extent of social support that cancer survivors needed, and had received from their work community. The cancer survivors had received most support from their co-workers, and they hoped for more support especially from the occupational health care personnel (39% of women and 29% of men). More support was especially needed by men who had lymphoma, had received chemotherapy or had a low education level. The results of this study show that the majority of the survivors are able to return to work. There is, however, a group of cancer survivors who leave work life early, have impaired work ability due to their illness, and suffer from lack of support from their work place and the occupational health services. Treatment-related, as well as sociodemographic factors play an important role in survivors' work-related problems, and presumably their possibilities to continue working.

Visual completion in an illusory figure

The visual systems of humans and animals represent physical reality in a modified way, depending on the specific demands that the species in question has for survival. The ability to perceive visual illusions is found in independently evolved visual systems, from honeybees to humans. In humans, the ability emerges early, at the age of four months. Thus the perception of illusion is likely to reflect visual processes of fundamental importance for object perception in natural vision. The experiments reported in this thesis employed various modifications of the Kanizsa triangle, a drawn configuration composed of three black disks with missing sectors on a white background. The sectors appear to form the tips of a triangle. The visual system completes the physically empty area between the disks, generally called inducers, with giving the perception of an illusory triangle. The illusory triangle consists of an illusory surface bounded by illusory contours; the triangle appears brighter than and to lie above the background. If the sectors are coloured, the colour fills the illusory area, a phenomenon known as neon colour spreading . We investigated spatial limitations on the perception of Kanizsa-type illusions and how other stimuli and viewing parameters affected these limitations. We also studied complex configurations thick, bent, mobile and chromatic inducers - to determine whether illusions combining several attributes can be perceived. The results suggest that the visual system is highly effective in completing a percept. The perception of an illusory figure is spatially scale invariant when perceived at threshold. The processing time and the number of fixations modify the percept, making the perception of the illusion more probable in various viewing conditions. Furthermore, the fact that the illusion can be perceived when only one inducer is physically present at any given moment indicates the potential of single inducers. Apparently, modelling illusory figure perception will require a combination of low-level, local processes and higher-level integrative processes. Our studies with stimuli combining several attributes relevant to object perception demonstrate that the perception of an illusory figure is flexible and is maintained also when it contains colour and volume and when shown in movement. All in all, the results confirm the assumed importance of the visual processes related with the perception of illusory figures in everyday viewing. This is indicated by the variety of inducer modifications that can be made without destroying the percept. Furthermore, the illusion can acquire additional attributes from such modifications. Due to individual differences in the perception of illusory figures, universal values for absolute performance are not always meaningful, but stable trends and general relations do exist.

Evaluation of driving ability of the disabled persons in the context of the psychological activity theory

In the future the number of the disabled drivers requiring a special evaluation of their driving ability will increase due to the ageing population, as well as the progress of adaptive technology. This places pressure on the development of the driving evaluation system. Despite quite intensive research there is still no consensus concerning what is the factual situation in a driver evaluation (methodology), which measures should be included in an evaluation (methods), and how an evaluation has to be carried out (practise). In order to find answers to these questions we carried out empirical studies, and simultaneously elaborated upon a conceptual model for driving and a driving evaluation. The findings of empirical studies can be condensed into the following points: 1) A driving ability defined by the on-road driving test is associated with different laboratory measures depending on the study groups. Faults in the laboratory tests predicted faults in the on-road driving test in the novice group, whereas slowness in the laboratory predicted driving faults in the experienced drivers group. 2) The Parkinson study clearly showed that even an experienced clinician cannot reliably accomplish an evaluation of a disabled person’s driving ability without collaboration with other specialists. 3) The main finding of the stroke study was that the use of a multidisciplinary team as a source of information harmonises the specialists’ evaluations. 4) The patient studies demonstrated that the disabled persons themselves, as well as their spouses, are as a rule not reliable evaluators. 5) From the safety point of view, perceptible operations with the control devices are not crucial, but correct mental actions which the driver carries out with the help of the control devices are of greatest importance. 6) Personality factors including higher-order needs and motives, attitudes and a degree of self-awareness, particularly a sense of illness, are decisive when evaluating a disabled person’s driving ability. Personality is also the main source of resources concerning compensations for lower-order physical deficiencies and restrictions. From work with the conceptual model we drew the following methodological conclusions: First, the driver has to be considered as a holistic subject of the activity, as a multilevel hierarchically organised system of an organism, a temperament, an individuality, and a personality where the personality is the leading subsystem from the standpoint of safety. Second, driving as a human form of a sociopractical activity, is also a hierarchically organised dynamic system. Third, in an evaluation of driving ability it is a question of matching these two hierarchically organised structures: a subject of an activity and a proper activity. Fourth, an evaluation has to be person centred but not disease-, function- or method centred. On the basis of our study a multidisciplinary team (practitioner, driving school teacher, psychologist, occupational therapist) is recommended for use in demanding driver evaluations. Primary in a driver’s evaluations is a coherent conceptual model while concrete methods of evaluations may vary. However, the on-road test must always be performed if possible.

From a "Student" to a Lifelong "Consumer" : Constructions of Educability in Adult Students' Narrative Life Histories

The focus of this study was to examine the constructions of the educable subject of the lifelong learning (LLL) narrative in the narrative life histories of adult students at general upper secondary school for adults (GUSSA). In this study lifelong learning has been defined as a cultural narrative on education, “a system of political thinking” that is not internally consistent, but has contradictory themes embedded within it (Billig et al., 1988). As earlier research has shown and this study also confirms, the LLL narrative creates differences between those who are included and those who fall behind and are excluded from the learning society ideal. Educability expresses socially constructed interpretations on who benefit from education and who should be educated and how. The presupposition in this study has been that contradictions between the LLL narrative and the so-called traditional constructions of educability are likely to be constructed as the former relies on the all-inclusive interpretation of educability and the latter on the meritocratic model of educating individuals based on their innate abilities. The school system continues to uphold the institutionalized ethos of educability that ranks students into the categories “bright”, “mediocre”, and “poor” (Räty & Snellman, 1998) on the basis of their abilities, including gender-related differences as well as differences based on social class. Traditional age-related norms also persist, for example general upper secondary education is normatively completed in youth and not in adulthood, and the formal learning context continues to outweigh both non-formal and informal learning. Moreover, in this study the construction of social differences in relation to educability and, thereafter unequal access to education has been examined in relation to age, social class, and gender. The biographical work of the research participants forms a peephole that permits the examination of the dilemmatic nature of the constructions of educability in this study. Formal general upper secondary education in adulthood is situated on the border between the traditional and the LLL narratives on educability: participation in GUSSA inevitably means that one’s ability and competence as a student and learner becomes reassessed through the assessment criteria maintained by schools, whereas according to the principles of LLL everyone is educable; everyone is encouraged to learn throughout their lives regardless of age, social class, or gender. This study is situated in the field of adult education, sociology of education, and social psychological research on educability, having also been informed by feminist studies. Moreover, this study contributes to narrative life history research combining the structural analysis of narratives (Labov & Waletzky, 1997), i.e. mini-stories within life history, with the analysis of the life histories as structural and thematic wholes and the creation of coherence in them; thus, permitting both micro and macro analyses. On accounting for the discontinuity created by participation in general upper secondary school study in adulthood and not normatively in youth, the GUSSA students construct coherence in relation to their ability and competence as students and learners. The seven case studies illuminate the social differences constructed in relation to educability, i.e. social class, gender, age, and the “new category of student and learner”. In the data of this study, i.e. 20 general upper secondary school adult graduates’ narrative life histories primarily generated through interviews, two main coherence patterns of the adult educable subject emerge. The first performance-oriented pattern displays qualities that are closely related to the principles of LLL. Contrary to the principles of lifewide learning, however, the documentation of one’s competence through formal qualifications outweighs non-formal and informal learning in preparation for future change and the competition for further education, professional careers, and higher social positions. The second flexible learning pattern calls into question the status of formal, especially theoretical and academically oriented education; inner development is seen as more important than such external signs of development — grades and certificates. Studying and learning is constructed as a hobby and as a means to a more satisfactory life as opposed to a socially and culturally valued serious occupation leading to further education and career development. Consequently, as a curious, active, and independent learner, this educable but not readily employable subject is pushed into the periphery of lifelong learning. These two coherence patterns of the adult educable subject illuminate who is to be educated and how. The educable and readily employable LLL subject is to participate in formal education in order to achieve qualifications for working life, whereas the educable but not employable subject may utilize lifewide learning for her/his own pleasure. Key words: adult education, general upper secondary school for adults, educability, lifelong learning, narrative life history

Microarrays in molecular profiling of cancer - focus on head and neck squamous cell carcinoma

Microarrays have a wide range of applications in the biomedical field. From the beginning, arrays have mostly been utilized in cancer research, including classification of tumors into different subgroups and identification of clinical associations. In the microarray format, a collection of small features, such as different oligonucleotides, is attached to a solid support. The advantage of microarray technology is the ability to simultaneously measure changes in the levels of multiple biomolecules. Because many diseases, including cancer, are complex, involving an interplay between various genes and environmental factors, the detection of only a single marker molecule is usually insufficient for determining disease status. Thus, a technique that simultaneously collects information on multiple molecules allows better insights into a complex disease. Since microarrays can be custom-manufactured or obtained from a number of commercial providers, understanding data quality and comparability between different platforms is important to enable the use of the technology to areas beyond basic research. When standardized, integrated array data could ultimately help to offer a complete profile of the disease, illuminating mechanisms and genes behind disorders as well as facilitating disease diagnostics. In the first part of this work, we aimed to elucidate the comparability of gene expression measurements from different oligonucleotide and cDNA microarray platforms. We compared three different gene expression microarrays; one was a commercial oligonucleotide microarray and the others commercial and custom-made cDNA microarrays. The filtered gene expression data from the commercial platforms correlated better across experiments (r=0.78-0.86) than the expression data between the custom-made and either of the two commercial platforms (r=0.62-0.76). Although the results from different platforms correlated reasonably well, combining and comparing the measurements were not straightforward. The clone errors on the custom-made array and annotation and technical differences between the platforms introduced variability in the data. In conclusion, the different gene expression microarray platforms provided results sufficiently concordant for the research setting, but the variability represents a challenge for developing diagnostic applications for the microarrays. In the second part of the work, we performed an integrated high-resolution microarray analysis of gene copy number and expression in 38 laryngeal and oral tongue squamous cell carcinoma cell lines and primary tumors. Our aim was to pinpoint genes for which expression was impacted by changes in copy number. The data revealed that especially amplifications had a clear impact on gene expression. Across the genome, 14-32% of genes in the highly amplified regions (copy number ratio >2.5) had associated overexpression. The impact of decreased copy number on gene underexpression was less clear. Using statistical analysis across the samples, we systematically identified hundreds of genes for which an increased copy number was associated with increased expression. For example, our data implied that FADD and PPFIA1 were frequently overexpressed at the 11q13 amplicon in HNSCC. The 11q13 amplicon, including known oncogenes such as CCND1 and CTTN, is well-characterized in different type of cancers, but the roles of FADD and PPFIA1 remain obscure. Taken together, the integrated microarray analysis revealed a number of known as well as novel target genes in altered regions in HNSCC. The identified genes provide a basis for functional validation and may eventually lead to the identification of novel candidates for targeted therapy in HNSCC.

Pain among employees : risk factors and consequences

The overall objective of this study was to gain epidemiological knowledge about pain among employee populations. More specifically, the aims were to assess the prevalence of pain, to identify socio-economic risk groups and work-related psychosocial risk factors, and to assess the consequences in terms of health-related functioning and sickness absence. The study was carried out among the municipal employees of the City of Helsinki. Data comprised questionnaire survey conducted in years 2000-2002 and register data on sickness absence. Altogether 8960 40-60 year old employees participated to the survey (response rate 67%). Pain is common among ageing employees. Approximately 29 per cent of employees reported chronic pain and 15 per cent acute pain, and about seven per cent reported moderately or severely limiting disabling chronic pain. Pain was more common among those with lower level of education or in a low occupational class. -- Psychosocial work environment was associated with pain reports. Job strain, bullying at workplace, and problems in combining work and home duties were associated with pain among women. Among men combining work and home duties was not associated with pain, whereas organizational injustice showed associations. Pain affects functional capacity and predicts sickness absence. Those with pain reported lower level of both mental and physical functioning than those with no pain, physical functioning being more strongly affected than mental. Bodily location of pain or whether pain was acute or chronic had only minor impact on the variation in functioning, whereas the simple count of painful locations was associated with widest variation. Pain accounted for eight per cent of short term (1-3 day) sickness absence spells among men and 13 per cent among women. Of absence spells lasting between four and 14 days pain accounted for 23 per cent among women and 25 per cent among men, corresponding figures for over 14 day absence spells being 37 and 30 per cent. The association between pain and sickness absence was relatively independent of physical and psychosocial work factors, especially among women. The results of this study provide a picture of the epidemiology of pain among employees. Pain is a significant problem that seriously affects work ability. Information on risk groups can be utilized to make prevention measures more effective among those at high risk, and to decrease pain rates and thereby narrow the differences between socio-economic groups. Furthermore, the work-related psychosocial risk factors identified in this study are potentially modifiable, and it should be possible to target interventions on decreasing pain rates among employees.

A capability-based view of organisational renewal : Combining opportunity- and advantage-seeking growth in large, established European and North American wood-industry companies

The purpose of this study was to extend understanding of how large firms pursuing sustained and profitable growth manage organisational renewal. A multiple-case study was conducted in 27 North American and European wood-industry companies, of which 11 were chosen for closer study. The study combined the organisational-capabilities approach to strategic management with corporate-entrepreneurship thinking. It charted the further development of an identification and classification system for capabilities comprising three dimensions: (i) the dynamism between firm-specific and industry-significant capabilities, (ii) hierarchies of capabilities and capability portfolios, and (iii) their internal structure. Capability building was analysed in the context of the organisational design, the technological systems and the type of resource-bundling process (creating new vs. entrenching existing capabilities). The thesis describes the current capability portfolios and the organisational changes in the case companies. It also clarifies the mechanisms through which companies can influence the balance between knowledge search and the efficiency of knowledge transfer and integration in their daily business activities, and consequently the diversity of their capability portfolio and the breadth and novelty of their product/service range. The largest wood-industry companies of today must develop a seemingly dual strategic focus: they have to combine leading-edge, innovative solutions with cost-efficient, large-scale production. The use of modern technology in production was no longer a primary source of competitiveness in the case companies, but rather belonged to the portfolio of basic capabilities. Knowledge and information management had become an industry imperative, on a par with cost effectiveness. Yet, during the period of this research, the case companies were better in supporting growth in volume of the existing activity than growth through new economic activities. Customer-driven, incremental innovation was preferred over firm-driven innovation through experimentation. The three main constraints on organisational renewal were the lack of slack resources, the aim for lean, centralised designs, and the inward-bound communication climate.

Options for selecting dairy cattle for milk coagulation ability

Lypsylehmien maidon juoksettumiskyvyn jalostuskeinot Väitöskirjassa tutkittiin lypsylehmien maidon juustonvalmistuslaadun parantamista jalostusvalinnan avulla. Tutkimusaihe on tärkeä, sillä yhä suurempi osa maidosta käytetään juustonvalmistukseen. Tutkimuksen kohteena oli maidon juoksettumiskyky, sillä se on yksi keskeisistä juustomäärään vaikuttavista tekijöistä. Maidon juoksettumiskyky vaihteli huomattavasti lehmien, sonnien, karjojen, rotujen ja lypsykauden vaiheiden välillä. Vaikka tankkimaidon juoksettumiskyvyssä olikin suuria eroja karjoittain, karja selitti vain pienen osan juoksettumiskyvyn kokonaisvaihtelusta. Todennäköisesti perinnölliset erot lehmien välillä selittävät suurimman osan karjojen tankkimaitojen juoksettumiskyvyssä havaituista eroista. Hyvä hoito ja ruokinta vähensivät kuitenkin jossain määrin huonosti juoksettuvien tankkimaitojen osuutta karjoissa. Holstein-friisiläiset lehmät olivat juoksettumiskyvyltään ayrshire-rotuisia lehmiä parempia. Huono juoksettuminen ja juoksettumattomuus oli vain vähäinen ongelma holstein-friisiläisillä (10 %), kun taas kolmannes ayrshire-lehmistä tuotti huonosti juoksettuvaa tai juoksettumatonta maitoa. Maitoa sanotaan huonosti juoksettuvaksi silloin, kun juustomassa ei ole riittävän kiinteää leikattavaksi puolen tunnin kuluttua juoksetteen lisäyksestä. Juoksettumattomaksi määriteltävä maito ei saostu lainkaan puolen tunnin aikana ja on siksi erittäin huonoa raaka-ainetta juustomeijereille. Noin 40 % lehmien välisistä eroista maidon juoksettumiskyvyssä selittyi perinnöllisillä tekijöillä. Juoksettumiskykyä voikin sanoa hyvin periytyväksi ominaisuudeksi. Kolme mittauskertaa lehmää kohti riittää varsin hyvin lehmän maidon keskimääräisen juoksettumiskyvyn arvioimiseen. Tällä hetkellä juoksettumiskyvyn suoran jalostamisen ongelmana on kuitenkin automatisoidun, laajamittaiseen käyttöön soveltuvan mittalaitteen puute. Tämän takia väitöskirjassa tutkittiin mahdollisuuksia jalostaa maidon juoksettumiskykyä epäsuorasti, jonkin toisen ominaisuuden kautta. Tällaisen ominaisuuden pitää olla kyllin voimakkaasti perinnöllisesti kytkeytynyt juoksettumiskykyyn, jotta jalostus olisi mahdollista sen avulla. Tutkittavat ominaisuudet olivat sonnien kokonaisjalostusarvossa jo mukana olevat maitotuotos ja utareterveyteen liittyvät ominaisuudet sekä kokonaisjalostusarvoon kuulumattomat maidon valkuais- ja kaseiinipitoisuus sekä maidon pH. Väitöskirjassa tutkittiin myös mahdollisuuksia ns. merkkiavusteiseen valintaan tutkimalla maidon juoksettumattomuuden perinnöllisyyttä ja kartoittamalla siihen liittyvät kromosomialueet. Tutkimuksen tulosten perusteella lehmien utareterveyden jalostaminen parantaa jonkin verran myös maidon juoksettumiskykyä sekä vähentää juoksettumattomuutta ayrshire-rotuisilla lehmillä. Lehmien maitotuotos ja maidon juoksettumiskyky sekä juoksettumattomuus ovat sen sijaan perinnöllisesti toisistaan riippumattomia ominaisuuksia. Myöskin maidon valkuais- ja kaseiinipitoisuuden perinnöllinen yhteys juoksettumiskykyyn oli likimain nolla. Maidon pH:n ja juoksettumiskyvyn välillä oli melko voimakas perinnöllinen yhteys, joten maidon pH:n jalostaminen parantaisi myös maidon juoksettumiskykyä. Todennäköisesti sen jalostaminen ei kuitenkaan vähentäisi juoksettumatonta maitoa tuottavien lehmien määrää. Koska maidon juoksettumattomuus on niin yleinen ongelma suomalaisilla ayrshire-lehmillä, väitöksessä selvitettiin tarkemmin ilmiön taustoja. Kaikissa kolmessa tutkimusaineistoissa noin 10 % ayrshire-lehmistä tuotti juoksettumatonta maitoa. Kahden vuoden kuukausittaisen seurannan aikana osa lehmistä tuotti juoksettumatonta maitoa lähes joka mittauskerralla. Maidon juoksettumattomuus oli yhteydessä lypsykauden vaiheeseen, mutta mikään ympäristötekijöistä ei pystynyt täysin selittämään sitä. Sen sijaan viitteet sen periytyvyydestä vahvistuivat tutkimusten edetessä. Lopuksi tutkimusryhmä onnistui kartoittamaan juoksettumattomuutta aiheuttavat kromosomialueet kromosomeihin 2 ja 18, lähelle DNA-merkkejä BMS1126 ja BMS1355. Tulosten perusteella maidon juoksettumattomuus ei ole yhteydessä maidon juoksettumistapahtumassa keskeisiin kaseiinigeeneihin. Sen sijaan on mahdollista, että juoksettumattomuusongelman aiheuttavat kaseiinigeenien syntetisoinnin jälkeisessä muokkauksessa tapahtuvat virheet. Asia vaatii kuitenkin perusteellista tutkimista. Väitöksen tulosten perusteella maidon juoksettumattomuusgeeniä kantavien eläinten karsiminen jalostuseläinten joukosta olisi tehokkain tapa jalostaa maidon juoksettumiskykyä suomalaisessa lypsykarjapopulaatiossa.

Spirituality of Finnish peacekeepers

The previous academic research on Finnish peacekeeping has clarified the operative and historical aspects of Finnish peacekeeping lacking the view of an individual who does the actual peacekeeping work. This research is based on the underlying theoretical assumption of human beings possessing different kinds of talents and intelligences creating a holistic entity. In this broad perspective spirituality was explored as an umbrella concept, as a holistic ability or talent, that can be explored as the deepest aspect of defining what it means to be human. The theoretical framework incorporated the concept of an intelligence, which is defined in Gardner's theory of multiple intelligences as the ability to solve problems, or to create products, that are valued within one or more cultural settings (Gardner, 1993, x). The viability of this theory was studied in the sample of Finnish peacekeepers. Spirituality in the theoretical and conceptual horizon was viewed as an extension of Gardner's theory of intelligences as one potential Gardnerian intelligence candidate. In addition to Gardner's theory, spirituality was explored as sensitivity which includes capacities such as sensing awareness, sensing mystery and sensing value (Hay, 1998). Also the practical aspects of spirituality were taken in account as shown in our everyday lives giving us the direction and influencing our social responsibilities and concerns (Bradford, 1995). Spirituality was explored also involving the element of the peacekeepers' community, the element of personal moral orientations and in the domain of religion and coping. The purpose of this research aimed in two dimensions. First, the aim was to outline the intelligence profile and the spiritual sensitivity profile of peacekeepers. Second, the aim was to understand qualitatively the nature of peacekeepers' spirituality The research interests were studied with different kinds of peacekeepers. Applying the mixed methods approach the research was conducted in two phases: first the former SFOR peacekeepers (N=6) were interviewed and the data was analysed. Inspired by the primary findings of these interviews, the data for the case-study of one peacekeeper was collected in co-operation with one former SFOR peacekeeper (N=1). In the second phase the data was collected from KFOR peacekeepers through the quantitative MI-Survey and the spiritual sensitivity survey (N=195). The quantitative method was used to outline the intelligence profile and the spiritual sensitivity profile of peacekeepers (N=195). In the mixed methods approach this method highlighted the general overview of intelligence traits and spiritual sensitivity of peacekeepers. In the mixed methods approach the qualitative method including interviews (N=6) and a case-study of one peacekeeper (N=1) increased subjective, qualitative information of spirituality of peacekeepers. The intelligence profile of peacekeepers highlighted the bodily-kinesthetic and interpersonal dimensions as the practical and social aspects of peacekeepers. Strong inter-item dependencies in the intrapersonal intelligence profile meant that peacekeepers possess a self-reflection and self-knowledge component and they reflect on deep psychological and philosophical issues. Regarding the spiritual sensitivity, peacekeepers found awareness-sensing, mystery-sensing, value-sensing and community-sensing important. The community-sensing emphasised a strong will to advance peace and to help people who are in need: things that are close to the heart of the peacekeepers. These results depicted practicality, being socially capable, and reflecting one's inner world as essential to peacekeepers. Moreover, spirituality as peacekeepers' moral endeavour became clearer because the sub-model of their community-sensing described morally charged destinations: advancing peace and helping people in need. In the qualitative findings peacekeepers articulated justice orientation and rule-following characterising the nature of peacekeepers' moral attitude and moral call (Kohlberg, 1969). An ethic of care (Gilligan, 1982) describes mainly female moral orientation, but the findings revealed that an ethic of care is also an important agent supporting strongly male peacekeepers in their aim to carry out qualitatively good peacekeeping work. The moral endeavour was voiced, when the role of religion in coping meant the assessment of the a way of life, a way of conduct, a way of being truthful to one's own values in confusing surroundings. The practical level of spiritual and religious contemplation was voiced as morally charged inner motivation to fulfil one's duties and at the same time to cope with various peacekeeping challenges. The results of different data sets were combined and interpreted as the moral endeavour, which characterises peacekeepers' spirituality. As the combining result, the perspective of peacekeepers' spirituality is considered moral or at least morally charged.

Where and how to conserve: Extending the scope of spatial reserve network design

Ongoing habitat loss and fragmentation threaten much of the biodiversity that we know today. As such, conservation efforts are required if we want to protect biodiversity. Conservation budgets are typically tight, making the cost-effective selection of protected areas difficult. Therefore, reserve design methods have been developed to identify sets of sites, that together represent the species of conservation interest in a cost-effective manner. To be able to select reserve networks, data on species distributions is needed. Such data is often incomplete, but species habitat distribution models (SHDMs) can be used to link the occurrence of the species at the surveyed sites to the environmental conditions at these locations (e.g. climatic, vegetation and soil conditions). The probability of the species occurring at unvisited location is next predicted by the model, based on the environmental conditions of those sites. The spatial configuration of reserve networks is important, because habitat loss around reserves can influence the persistence of species inside the network. Since species differ in their requirements for network configuration, the spatial cohesion of networks needs to be species-specific. A way to account for species-specific requirements is to use spatial variables in SHDMs. Spatial SHDMs allow the evaluation of the effect of reserve network configuration on the probability of occurrence of the species inside the network. Even though reserves are important for conservation, they are not the only option available to conservation planners. To enhance or maintain habitat quality, restoration or maintenance measures are sometimes required. As a result, the number of conservation options per site increases. Currently available reserve selection tools do however not offer the ability to handle multiple, alternative options per site. This thesis extends the existing methodology for reserve design, by offering methods to identify cost-effective conservation planning solutions when multiple, alternative conservation options are available per site. Although restoration and maintenance measures are beneficial to certain species, they can be harmful to other species with different requirements. This introduces trade-offs between species when identifying which conservation action is best applied to which site. The thesis describes how the strength of such trade-offs can be identified, which is useful for assessing consequences of conservation decisions regarding species priorities and budget. Furthermore, the results of the thesis indicate that spatial SHDMs can be successfully used to account for species-specific requirements for spatial cohesion - in the reserve selection (single-option) context as well as in the multi-option context. Accounting for the spatial requirements of multiple species and allowing for several conservation options is however complicated, due to trade-offs in species requirements. It is also shown that spatial SHDMs can be successfully used for gaining information on factors that drive a species spatial distribution. Such information is valuable to conservation planning, as better knowledge on species requirements facilitates the design of networks for species persistence. This methods and results described in this thesis aim to improve species probabilities of persistence, by taking better account of species habitat and spatial requirements. Many real-world conservation planning problems are characterised by a variety of conservation options related to protection, restoration and maintenance of habitat. Planning tools therefore need to be able to incorporate multiple conservation options per site, in order to continue the search for cost-effective conservation planning solutions. Simultaneously, the spatial requirements of species need to be considered. The methods described in this thesis offer a starting point for combining these two relevant aspects of conservation planning.

Mu in vitro transposition applications in protein engineering

Transposons, mobile genetic elements that are ubiquitous in all living organisms have been used as tools in molecular biology for decades. They have the ability to move into discrete DNA locations with no apparent homology to the target site. The utility of transposons as molecular tools is based on their ability to integrate into various DNA sequences efficiently, producing extensive mutant clone libraries that can be used in various molecular biology applications. Bacteriophage Mu is one of the most useful transposons due to its well-characterized and simple in vitro transposition reaction. This study establishes the properties of the Mu in vitro transposition system as a versatile multipurpose tool in molecular biology. In addition, this study describes Mu-based applications for engineering proteins by random insertional transposon mutagenesis in order to study structure-function relationships in proteins. We initially characterized the properties of the minimal Mu in vitro transposition system. We showed that the Mu transposition system works efficiently and accurately and produces insertions into a wide spectrum of target sites in different DNA molecules. Then, we developed a pentapeptide insertion mutagenesis strategy for inserting random five amino acid cassettes into proteins. These protein variants can be used especially for screening important sites for protein-protein interactions. Also, the system may produce temperature-sensitive variants of the protein of interest. Furthermore, we developed an efficient screening system for high-resolution mapping of protein-protein interfaces with the pentapeptide insertion mutagenesis. This was accomplished by combining the mutagenesis with subsequent yeast two-hybrid screening and PCR-based genetic footprinting. This combination allows the analysis of the whole mutant library en masse, without the need for producing or isolating separate mutant clones, and the protein-protein interfaces can be determined at amino acid accuracy. The system was validated by analysing the interacting region of JFC1 with Rab8A, and we show that the interaction is mediated via the JFC1 Slp homology domain. In addition, we developed a procedure for the production of nested sets of N- and C-terminal deletion variants of proteins with the Mu system. These variants are useful in many functional studies of proteins, especially in mapping regions involved in protein-protein interactions. This methodology was validated by analysing the region in yeast Mso1 involved in an interaction with Sec1. The results of this study show that the Mu in vitro transposition system is versatile for various applicational purposes and can efficiently be adapted to random protein engineering applications for functional studies of proteins.

Atomic scale engineering of carbon nanotubes

Carbon nanotubes, seamless cylinders made from carbon atoms, have outstanding characteristics: inherent nano-size, record-high Young’s modulus, high thermal stability and chemical inertness. They also have extraordinary electronic properties: in addition to extremely high conductance, they can be both metals and semiconductors without any external doping, just due to minute changes in the arrangements of atoms. As traditional silicon-based devices are reaching the level of miniaturisation where leakage currents become a problem, these properties make nanotubes a promising material for applications in nanoelectronics. However, several obstacles must be overcome for the development of nanotube-based nanoelectronics. One of them is the ability to modify locally the electronic structure of carbon nanotubes and create reliable interconnects between nanotubes and metal contacts which likely can be used for integration of the nanotubes in macroscopic electronic devices. In this thesis, the possibility of using ion and electron irradiation as a tool to introduce defects in nanotubes in a controllable manner and to achieve these goals is explored. Defects are known to modify the electronic properties of carbon nanotubes. Some defects are always present in pristine nanotubes, and naturally are introduced during irradiation. Obviously, their density can be controlled by irradiation dose. Since different types of defects have very different effects on the conductivity, knowledge of their abundance as induced by ion irradiation is central for controlling the conductivity. In this thesis, the response of single walled carbon nanotubes to ion irradiation is studied. It is shown that, indeed, by energy selective irradiation the conductance can be controlled. Not only the conductivity, but the local electronic structure of single walled carbon nanotubes can be changed by the defects. The presented studies show a variety of changes in the electronic structures of semiconducting single walled nanotubes, varying from individual new states in the band gap to changes in the band gap width. The extensive simulation results for various types of defect make it possible to unequivocally identify defects in single walled carbon nanotubes by combining electronic structure calculations and scanning tunneling spectroscopy, offering a reference data for a wide scientific community of researchers studying nanotubes with surface probe microscopy methods. In electronics applications, carbon nanotubes have to be interconnected to the macroscopic world via metal contacts. Interactions between the nanotubes and metal particles are also essential for nanotube synthesis, as single walled nanotubes are always grown from metal catalyst particles. In this thesis, both growth and creation of nanotube-metal nanoparticle interconnects driven by electron irradiation is studied. Surface curvature and the size of metal nanoparticles is demonstrated to determine the local carbon solubility in these particles. As for nanotube-metal contacts, previous experiments have proved the possibility to create junctions between carbon nanotubes and metal nanoparticles under irradiation in a transmission electron microscope. In this thesis, the microscopic mechanism of junction formation is studied by atomistic simulations carried out at various levels of sophistication. It is shown that structural defects created by the electron beam and efficient reconstruction of the nanotube atomic network, inherently related to the nanometer size and quasi-one dimensional structure of nanotubes, are the driving force for junction formation. Thus, the results of this thesis not only address practical aspects of irradiation-mediated engineering of nanosystems, but also contribute to our understanding of the behaviour of point defects in low-dimensional nanoscale materials.