Data structures for SIMD logic simulation

Due to the growth of design size and complexity, design verification is an important aspect of the Logic Circuit development process. The purpose of verification is to validate that the design meets the system requirements and specification. This is done by either functional or formal verification. The most popular approach to functional verification is the use of simulation based techniques. Using models to replicate the behaviour of an actual system is called simulation. In this thesis, a software/data structure architecture without explicit locks is proposed to accelerate logic gate circuit simulation. We call thus system ZSIM. The ZSIM software architecture simulator targets low cost SIMD multi-core machines. Its performance is evaluated on the Intel Xeon Phi and 2 other machines (Intel Xeon and AMD Opteron). The aim of these experiments is to: • Verify that the data structure used allows SIMD acceleration, particularly on machines with gather instructions ( section 5.3.1). • Verify that, on sufficiently large circuits, substantial gains could be made from multicore parallelism ( section 5.3.2 ). • Show that a simulator using this approach out-performs an existing commercial simulator on a standard workstation ( section 5.3.3 ). • Show that the performance on a cheap Xeon Phi card is competitive with results reported elsewhere on much more expensive super-computers ( section 5.3.5 ). To evaluate the ZSIM, two types of test circuits were used: 1. Circuits from the IWLS benchmark suit [1] which allow direct comparison with other published studies of parallel simulators.2. Circuits generated by a parametrised circuit synthesizer. The synthesizer used an algorithm that has been shown to generate circuits that are statistically representative of real logic circuits. The synthesizer allowed testing of a range of very large circuits, larger than the ones for which it was possible to obtain open source files. The experimental results show that with SIMD acceleration and multicore, ZSIM gained a peak parallelisation factor of 300 on Intel Xeon Phi and 11 on Intel Xeon. With only SIMD enabled, ZSIM achieved a maximum parallelistion gain of 10 on Intel Xeon Phi and 4 on Intel Xeon. Furthermore, it was shown that this software architecture simulator running on a SIMD machine is much faster than, and can handle much bigger circuits than a widely used commercial simulator (Xilinx) running on a workstation. The performance achieved by ZSIM was also compared with similar pre-existing work on logic simulation targeting GPUs and supercomputers. It was shown that ZSIM simulator running on a Xeon Phi machine gives comparable simulation performance to the IBM Blue Gene supercomputer at very much lower cost. The experimental results have shown that the Xeon Phi is competitive with simulation on GPUs and allows the handling of much larger circuits than have been reported for GPU simulation. When targeting Xeon Phi architecture, the automatic cache management of the Xeon Phi, handles and manages the on-chip local store without any explicit mention of the local store being made in the architecture of the simulator itself. However, targeting GPUs, explicit cache management in program increases the complexity of the software architecture. Furthermore, one of the strongest points of the ZSIM simulator is its portability. Note that the same code was tested on both AMD and Xeon Phi machines. The same architecture that efficiently performs on Xeon Phi, was ported into a 64 core NUMA AMD Opteron. To conclude, the two main achievements are restated as following: The primary achievement of this work was proving that the ZSIM architecture was faster than previously published logic simulators on low cost platforms. The secondary achievement was the development of a synthetic testing suite that went beyond the scale range that was previously publicly available, based on prior work that showed the synthesis technique is valid.

An ontology for risk management of digital collections

Maintaining accessibility to and understanding of digital information over time is a complex challenge that often requires contributions and interventions from a variety of individuals and organizations. The processes of preservation planning and evaluation are fundamentally implicit and share similar complexity. Both demand comprehensive knowledge and understanding of every aspect of to-be-preserved content and the contexts within which preservation is undertaken. Consequently, means are required for the identification, documentation and association of those properties of data, representation and management mechanisms that in combination lend value, facilitate interaction and influence the preservation process. These properties may be almost limitless in terms of diversity, but are integral to the establishment of classes of risk exposure, and the planning and deployment of appropriate preservation strategies. We explore several research objectives within the course of this thesis. Our main objective is the conception of an ontology for risk management of digital collections. Incorporated within this are our aims to survey the contexts within which preservation has been undertaken successfully, the development of an appropriate methodology for risk management, the evaluation of existing preservation evaluation approaches and metrics, the structuring of best practice knowledge and lastly the demonstration of a range of tools that utilise our findings. We describe a mixed methodology that uses interview and survey, extensive content analysis, practical case study and iterative software and ontology development. We build on a robust foundation, the development of the Digital Repository Audit Method Based on Risk Assessment. We summarise the extent of the challenge facing the digital preservation community (and by extension users and creators of digital materials from many disciplines and operational contexts) and present the case for a comprehensive and extensible knowledge base of best practice. These challenges are manifested in the scale of data growth, the increasing complexity and the increasing onus on communities with no formal training to offer assurances of data management and sustainability. These collectively imply a challenge that demands an intuitive and adaptable means of evaluating digital preservation efforts. The need for individuals and organisations to validate the legitimacy of their own efforts is particularly prioritised. We introduce our approach, based on risk management. Risk is an expression of the likelihood of a negative outcome, and an expression of the impact of such an occurrence. We describe how risk management may be considered synonymous with preservation activity, a persistent effort to negate the dangers posed to information availability, usability and sustainability. Risk can be characterised according to associated goals, activities, responsibilities and policies in terms of both their manifestation and mitigation. They have the capacity to be deconstructed into their atomic units and responsibility for their resolution delegated appropriately. We continue to describe how the manifestation of risks typically spans an entire organisational environment, and as the focus of our analysis risk safeguards against omissions that may occur when pursuing functional, departmental or role-based assessment. We discuss the importance of relating risk-factors, through the risks themselves or associated system elements. To do so will yield the preservation best-practice knowledge base that is conspicuously lacking within the international digital preservation community. We present as research outcomes an encapsulation of preservation practice (and explicitly defined best practice) as a series of case studies, in turn distilled into atomic, related information elements. We conduct our analyses in the formal evaluation of memory institutions in the UK, US and continental Europe. Furthermore we showcase a series of applications that use the fruits of this research as their intellectual foundation. Finally we document our results in a range of technical reports and conference and journal articles. We present evidence of preservation approaches and infrastructures from a series of case studies conducted in a range of international preservation environments. We then aggregate this into a linked data structure entitled PORRO, an ontology relating preservation repository, object and risk characteristics, intended to support preservation decision making and evaluation. The methodology leading to this ontology is outlined, and lessons are exposed by revisiting legacy studies and exposing the resource and associated applications to evaluation by the digital preservation community.

Query routing in cooperative semi-structured peer-to-peer information retrieval networks

Conventional web search engines are centralised in that a single entity crawls and indexes the documents selected for future retrieval, and the relevance models used to determine which documents are relevant to a given user query. As a result, these search engines suffer from several technical drawbacks such as handling scale, timeliness and reliability, in addition to ethical concerns such as commercial manipulation and information censorship. Alleviating the need to rely entirely on a single entity, Peer-to-Peer (P2P) Information Retrieval (IR) has been proposed as a solution, as it distributes the functional components of a web search engine – from crawling and indexing documents, to query processing – across the network of users (or, peers) who use the search engine. This strategy for constructing an IR system poses several efficiency and effectiveness challenges which have been identified in past work. Accordingly, this thesis makes several contributions towards advancing the state of the art in P2P-IR effectiveness by improving the query processing and relevance scoring aspects of a P2P web search. Federated search systems are a form of distributed information retrieval model that route the user’s information need, formulated as a query, to distributed resources and merge the retrieved result lists into a final list. P2P-IR networks are one form of federated search in routing queries and merging result among participating peers. The query is propagated through disseminated nodes to hit the peers that are most likely to contain relevant documents, then the retrieved result lists are merged at different points along the path from the relevant peers to the query initializer (or namely, customer). However, query routing in P2P-IR networks is considered as one of the major challenges and critical part in P2P-IR networks; as the relevant peers might be lost in low-quality peer selection while executing the query routing, and inevitably lead to less effective retrieval results. This motivates this thesis to study and propose query routing techniques to improve retrieval quality in such networks. Cluster-based semi-structured P2P-IR networks exploit the cluster hypothesis to organise the peers into similar semantic clusters where each such semantic cluster is managed by super-peers. In this thesis, I construct three semi-structured P2P-IR models and examine their retrieval effectiveness. I also leverage the cluster centroids at the super-peer level as content representations gathered from cooperative peers to propose a query routing approach called Inverted PeerCluster Index (IPI) that simulates the conventional inverted index of the centralised corpus to organise the statistics of peers’ terms. The results show a competitive retrieval quality in comparison to baseline approaches. Furthermore, I study the applicability of using the conventional Information Retrieval models as peer selection approaches where each peer can be considered as a big document of documents. The experimental evaluation shows comparative and significant results and explains that document retrieval methods are very effective for peer selection that brings back the analogy between documents and peers. Additionally, Learning to Rank (LtR) algorithms are exploited to build a learned classifier for peer ranking at the super-peer level. The experiments show significant results with state-of-the-art resource selection methods and competitive results to corresponding classification-based approaches. Finally, I propose reputation-based query routing approaches that exploit the idea of providing feedback on a specific item in the social community networks and manage it for future decision-making. The system monitors users’ behaviours when they click or download documents from the final ranked list as implicit feedback and mines the given information to build a reputation-based data structure. The data structure is used to score peers and then rank them for query routing. I conduct a set of experiments to cover various scenarios including noisy feedback information (i.e, providing positive feedback on non-relevant documents) to examine the robustness of reputation-based approaches. The empirical evaluation shows significant results in almost all measurement metrics with approximate improvement more than 56% compared to baseline approaches. Thus, based on the results, if one were to choose one technique, reputation-based approaches are clearly the natural choices which also can be deployed on any P2P network.