Modeling chickpea growth and development: Nitrogen accumulation and use

Quantitative information regarding nitrogen (N) accumulation and its distribution to leaves, stems and grains under varying environmental and growth conditions are limited for chickpea (Cicer arietinum L.). The information is required for the development of crop growth models and also for assessment of the contribution of chickpea to N balances in cropping systems. Accordingly, these processes were quantified in chickpea under different environmental and growth conditions (still without water or N deficit) using four field experiments and 1325 N measurements. N concentration ([N]) in green leaves was 50 mg g-1 up to beginning of seed growth, and then it declined linearly to 30 mg g-1 at the end of seed growth phase. [N] in senesced leaves was 12 mg g-1. Stem [N] decreased from 30 mg g-1 early in the season to 8 mg g-1 in senesced stems at maturity. Pod [N] was constant (35 mg g-1), but grain [N] decreased from 60 mg g-1 early in seed growth to 43 mg g-1 at maturity. Total N accumulation ranged between 9 and 30 g m-2. N accumulation was closely linked to biomass accumulation until maturity. N accumulation efficiency (N accumulation relative to biomass accumulation) was 0.033 g g-1 where total biomass was -2 and during early growth period, but it decreased to 0.0176 g g-1 during the later growth period when total biomass was >218 g m-2. During vegetative growth (up to first-pod), 58% of N was partitioned to leaves and 42% to stems. Depending on growth conditions, 37-72% of leaf N and 12-56% of stem N was remobilized to the grains. The parameter estimates and functions obtained in this study can be used in chickpea simulation models to simulate N accumulation and distribution.

Effects of rootstock and nitrogen fertiliser on postharvest anthracnose development in Hass avocado

These rootstock and nitrogen fertiliser studies confirmed that rootstock race can significantly affect the development of postharvest disease and mineral nutrient accumulation in Hass avocado fruit. When Hass (Guatemalan race) was grafted to seedling Velvick (West Indian race) rootstock, the severity and incidence of anthracnose in fruit were significantly reduced by up to 64 and 37%, respectively, compared with seedling Duke 6 (Mexican race) rootstock. Stem-end rot was also influenced by rootstock in some seasons, and significant reductions (up to 87%) in the severity and incidence of stem-end rot were recorded in Hass fruit from Velvick compared with Duke 6 rootstock trees. These improvements in postharvest diseases were associated with significantly lower concentrations of nitrogen and potassium, higher concentrations of calcium and magnesium, lower ratios of nitrogen:calcium and higher ratios of calcium + magnesium:potassium in Hass leaves and fruit from Velvick compared with Duke 6 rootstock trees. Altering the rate of nitrogen fertiliser had minimal impact on postharvest disease development. However, in one season, reducing the rate of nitrogen fertiliser to nil significantly reduced the concentration of nitrogen in the fruit skin, decreased the nitrogen:calcium ratio and significantly reduced the severity and incidence of anthracnose in Hass fruit from both Velvick and Duke 6 rootstock trees. The form of nitrogen fertiliser (ammonium compared with nitrate) applied to the trees did not significantly affect the postharvest disease susceptibility of Hass avocado fruit on either Velvick or Duke 6 rootstock. The Guatemalan race rootstocks, Anderson 8 and Anderson 10, were also found to be superior to the Mexican race rootstock, Parida 1, for reducing anthracnose severity. This again, was associated with a better balance of mineral nutrients (significantly lower nitrogen:calcium and higher calcium + magnesium:potassium ratios) in the fruit. This rootstock effect, however, was only observed in the first season of a 3-year experiment, possibly because of a better balance between vegetative growth and fruit production in Parida 1 in the latter two seasons. Significant positive correlations between anthracnose severity and fruit skin nitrogen:calcium ratios were evident across all experiments.

Achievements in forest tree genetic improvement in Australia and New Zealand 2: Development of Corymbia species and hybrids for plantations in eastern Australia

This paper describes the establishment of provenance seedling seed orchards of three spotted gums and cadaga (all species of Corymbia ex Eucalyptus). It also discusses the limitations of growing the spotted gums as pure species including: lack of mass flowering, susceptibility to a fungal shoot blight and low amenability to vegetative propagation. These limitations, together with observation of putative natural hybrids of the spotted gums with cadaga, and the early promise of manipulated hybrids, led to an intensive breeding and testing program. Many hybrid families have significant advantages in growth and tolerance to disease, insects and frost, and can be vegetatively propagated. They also exhibit broad environmental plasticity, allowing the best varieties to be planted across a wider range of sites than the spotted gums, resulting in more land being suitable for plantation development.

Seed production of Stylosanthes guyanensis. 1. Growth and development.

The pattern of growth and development of seed crops of stylo (Stylosanthes guyanensis) was derived from measurements made on experimental and commercial crops in north Queensland. The three cultivars Cook, Endeavour, and Schofield differed appreciably only in the timetable of their development. Each had distinct successive phases of vegetative and reproductive development culminating in total annual seed production of 700-800 kg ha-1 from a healthy closed canopy, the main recorded cause of reduced production being the disease Botrytis sp. In a healthy crop of Cook, the peak quantity of standing seed represented almost 90 per cent of the total accountable seed, and the rise to and decline from this peak proceeded at rates of the order of 3-4 per cent per day. It is deduced that, although there appears to be little potential for either increase in overall production or improvement in synchronization or retention characteristics beyond that currently attained by a closed canopy of healthy plants, there is scope for an increase in the efficiency of recovery of standing seed. Maximum recovery will be achieved through attention to choice of time of harvest, presentation of a minimum amount of extraneous vegetation to the harvester, and improvement in harvester separation.

Background to the approved beneficial Cynodon spp. vegetative cultivars within Australia

The growth of the Australian turfgrass industry has significantly expanded over recent decades. One reason for this occurring has been with development of better suited or higher quality turfgrass cultivars for Australia’s harsh climatic conditions. In recent years drought has widely affected the turfgrass industry and as such, greater drought tolerant C4 grasses such as Cynodon spp. have been used. In 2008, as part of the 24th Australian Turfgrass Conference Proceedings, Peter McMaugh wrote an extensive article on the couch grass breeding history in Australia. This paper contains an extension to his work detailing the current (1950s to 2010) Cynodon species found in Australia. Detailed information has been sourced in relation to the origin and development of the grasses which are suitable for turfgrass use. Such detail provides an interesting picture of the source of proliferation of newer cultivars and how the Australian industry has evolved with the introduction of overseas and Australian selected cultivars. The information adds to the preceding work, including morphological and agronomic attributes and how closely each selection or cultivar is related. The cultivars discussed in this article (listed alphabetically) are derived from one of the four classifications identified by the breeder/author, being (i) Cynodon sp. (although the cultivar contained within the taxa fits best being classified as a Cynodon hybrid), (ii) Cynodon dactylon x C. transvaalensis (Cynodon hybrid), (iii) Cynodon dactylon (green couch) and (iv) Cynodon dactylon x C. magenissii.

Ground cover management alters development of Fusarium wilt symptoms in Ducasse bananas

Many banana producing regions around the world experience climate variability as a result of seasonal rainfall and temperature conditions, which result in sub-optimal conditions for banana production. This can create periods of plant stress which impact on plant growth, development and yields. Furthermore, diseases such as Fusarium wilt caused by Fusarium oxysporum f. sp. cubense, can become more predominant following periods of environmental stress, particularly for many culturally significant cultivars such as Ducasse (synonym Pisang Awak) (Musa ABB). The aim of this experiment was to determine if expression of symptoms of Fusarium wilt of bananas in a susceptible cultivar could be explained by environmental conditions, and if soil management could reduce the impact of the disease and increase production. An experiment was established in an abandoned commercial field of Ducasse bananas with a high incidence of Fusarium wilt. Vegetated ground cover was maintained around the base of banana plants and compared with plants grown in bare soil for changes in growth, production and disease symptoms. Expression of Fusarium wilt was found to be a function of water stress potential and the heat unit requirement for bananas. The inclusion of vegetative ground cover around the base of the banana plants significantly reduced the severity and incidence of Fusarium wilt by 20 % and altered the periods of symptom development. The growth of bananas and development of the bunch followed the accumulated heat units, with a greater number of bunched plants evident during warmer periods of the year. The weight of bunches harvested in a second crop cycle was increased when banana plants were grown in areas with vegetative ground cover, with fewer losses of plants due to Fusarium wilt.

The role of BoFLC2 in cauliflower (Brassica oleracea var. botrytis L.) reproductive development

In agricultural species that are sexually propagated or whose marketable organ is a reproductive structure, management of the flowering process is critical. Inflorescence development in cauliflower is particularly complex, presenting unique challenges for those seeking to predict and manage flowering time. In this study, an integrated physiological and molecular approach was used to clarify the environmental control of cauliflower reproductive development at the molecular level. A functional allele of BoFLC2 was identified for the first time in an annual brassica, along with an allele disrupted by a frameshift mutation (boflc2). In a segregating F2 population derived from a cross between late-flowering (BoFLC2) and early-flowering (boflc2) lines, this gene behaved in a dosage-dependent manner and accounted for up to 65% of flowering time variation. Transcription of BoFLC genes was reduced by vernalization, with the floral integrator BoFT responding inversely. Overall expression of BoFT was significantly higher in early-flowering boflc2 lines, supporting the idea that BoFLC2 plays a key role in maintaining the vegetative state. A homologue of Arabidopsis VIN3 was isolated for the first time in a brassica crop species and was up-regulated by two days of vernalization, in contrast to findings in Arabidopsis where prolonged exposure to cold was required to elicit up-regulation. The correlations observed between gene expression and flowering time in controlled-environment experiments were validated with gene expression analyses of cauliflowers grown outdoors under 'natural' vernalizing conditions, indicating potential for transcript levels of flowering genes to form the basis of predictive assays for curd initiation and flowering time.