Modeling chickpea growth and development: Nitrogen accumulation and use

Quantitative information regarding nitrogen (N) accumulation and its distribution to leaves, stems and grains under varying environmental and growth conditions are limited for chickpea (Cicer arietinum L.). The information is required for the development of crop growth models and also for assessment of the contribution of chickpea to N balances in cropping systems. Accordingly, these processes were quantified in chickpea under different environmental and growth conditions (still without water or N deficit) using four field experiments and 1325 N measurements. N concentration ([N]) in green leaves was 50 mg g-1 up to beginning of seed growth, and then it declined linearly to 30 mg g-1 at the end of seed growth phase. [N] in senesced leaves was 12 mg g-1. Stem [N] decreased from 30 mg g-1 early in the season to 8 mg g-1 in senesced stems at maturity. Pod [N] was constant (35 mg g-1), but grain [N] decreased from 60 mg g-1 early in seed growth to 43 mg g-1 at maturity. Total N accumulation ranged between 9 and 30 g m-2. N accumulation was closely linked to biomass accumulation until maturity. N accumulation efficiency (N accumulation relative to biomass accumulation) was 0.033 g g-1 where total biomass was -2 and during early growth period, but it decreased to 0.0176 g g-1 during the later growth period when total biomass was >218 g m-2. During vegetative growth (up to first-pod), 58% of N was partitioned to leaves and 42% to stems. Depending on growth conditions, 37-72% of leaf N and 12-56% of stem N was remobilized to the grains. The parameter estimates and functions obtained in this study can be used in chickpea simulation models to simulate N accumulation and distribution.

Modeling population growth and site specific control of the invasive Lantana camara L. (Verbenaceae) under differing fire regimes

It is at the population level that an invasion either fails or succeeds. Lantana camara L. (Verbenaceae) is a weed of great significance in Queensland Australia and globally but its whole life-history ecology is poorly known. Here we used 3 years of field data across four land use types (farm, hoop pine plantation and two open eucalyptus forests, including one with a triennial fire regime) to parameterise the weed’s vital rates and develop size-structured matrix models. Lantana camara in its re-colonization phase, as observed in the recently cleared hoop pine plantation, was projected to increase more rapidly (annual growth rate, λ = 3.80) than at the other three sites (λ 1.88–2.71). Elasticity analyses indicated that growth contributed more (64.6 %) to λ than fecundity (18.5 %) or survival (15.5 %), while across size groups, the contribution was of the order: juvenile (19–27 %) ≥ seed (17–28 %) ≥ seedling (16–25 %) > small adult (4–26 %) ≥ medium adult (7–20 %) > large adult (0–20 %). From a control perspective it is difficult to determine a single weak point in the life cycle of lantana that might be exploited to reduce growth below a sustaining rate. The triennial fire regime applied did not alter the population elasticity structure nor resulted in local control of the weed. However, simulations showed that, except for the farm population, periodic burning could work within 4–10 years for control of the weed, but fire frequency should increase to at least once every 2 years. For the farm, site-specific control may be achieved by 15 years if the biennial fire frequency is tempered with increased burning intensity.

A precision apparatus, with solid phase micro-extraction monitoring capability, for incorporation studies of gaseous precursors into insect-derived metabolites

An apparatus is described that facilitates the determination of incorporation levels of isotope labelled, gaseous precursors into volatile insect-derived metabolites. Atmospheres of varying gas compositions can be generated by evacuation of a working chamber followed by admission of the required levels of component gases, using a precision, digitised pressure read-out system. Insects such as fruit-flies are located initially in a small introduction chamber, from which migration can occur downwards into the working chamber. The level of incorporation of labelled precursors is continuously assayed by the Solid Phase Micro Extraction (SPME) technique and GC-MS analyses. Experiments with both Bactrocera species (fruit-flies) and a parasitoid wasp, Megarhyssa nortoni nortoni (Cresson) and oxygen-18 labelled dioxygen illustrate the utility of this system. The isotope effects of oxygen-18 on the carbon-13 NMR spectra of 1,7- dioxaspiro[5,5]undecane are also described.

Association of a second phase of mortality in cucumber seedlings with a rapid rate of metalaxyl biodegradation in greenhouse soils

A study was undertaken from 2004 to 2007 to investigate factors associated with decreased efficacy of metalaxyl to manage damping-off of cucumber in Oman. A survey over six growing seasons showed that growers lost up to 14.6% of seedlings following application of metalaxyl. No resistance to metalaxyl was found among Pythium isolates. Damping-off disease in the surveyed greenhouses followed two patterns. In most (69%) greenhouses, seedling mortality was found to occur shortly after transplanting and decrease thereafter (Phase-I). However, a second phase of seedling mortality (Phase-II) appeared 9-14 d after transplanting in about 31% of the surveyed greenhouses. Analysis of the rate of biodegradation of metalaxyl in six greenhouses indicated a significant increase in the rate of metalaxyl biodegradation in greenhouses, which encountered Phase-II damping-off. The half-life of metalaxyl dropped from 93 d in soil, which received no previous metalaxyl treatment to 14 d in soil, which received metalaxyl for eight consecutive seasons, indicating an enhanced rate of metalaxyl biodegradation after repeated use. Multiple applications of metalaxyl helped reduce the appearance of Phase-II damping-off. This appears to be the first report of rapid biodegradation of metalaxyl in greenhouse soils and the first report of its association with appearance of a second phase of mortality in cucumber seedlings.

The environmental fate of diuron under a conventional production regime in a sugarcane farm during the plant cane phase

BACKGROUND: Field studies of diuron and its metabolites 3-(3,4-dichlorophenyl)-1-methylurea (DCPMU), 3,4-dichlorophenylurea (DCPU) and 3,4-dichloroaniline (DCA) were conducted in a farm soil and in stream sediments in coastal Queensland, Australia. RESULTS: During a 38 week period after a 1.6 kg ha^-1 diuron application, 70-100% of detected compounds were within 0-15 cm of the farm soil, and 3-10% reached the 30-45 cm depth. First-order t1/2 degradation averaged 49 ± 0.9 days for the 0-15, 0-30 and 0-45 cm soil depths. Farm runoff was collected in the first 13-50 min of episodes lasting 55-90 min. Average concentrations of diuron, DCPU and DCPMU in runoff were 93, 30 and 83-825 µg L^-1 respectively. Their total loading in all runoff was >0.6% of applied diuron. Diuron and DCPMU concentrations in stream sediments were between 3-22 and 4-31 µg kg^-1 soil respectively. The DCPMU/diuron sediment ratio was >1. CONCLUSION: Retention of diuron and its metabolites in farm topsoil indicated their negligible potential for groundwater contamination. Minimal amounts of diuron and DCMPU escaped in farm runoff. This may entail a significant loading into the wider environment at annual amounts of application. The concentrations and ratio of diuron and DCPMU in stream sediments indicated that they had prolonged residence times and potential for accumulation in sediments. The higher ecotoxicity of DCPMU compared with diuron and the combined presence of both compounds in stream sediments suggest that together they would have a greater impact on sensitive aquatic species than as currently apportioned by assessments that are based upon diuron alone.

VG10024 Consumer insights into vegetable consumption phase two

To develop the psychological concepts identified in Horticulture Australia Limited (HAL) study VG08000 into a survey instrument. To conduct a quantitative study that provides a psychological understanding of consumer segments.

Sustainable Grazing in the Channel Country Floodplains (phase 2) : A technical report on findings between March 2003 and June 2006

‘Sustainable Grazing in the Channel Country Floodplains’ was initiated by industry to redress the lack of objective information for sustainable management in the floodplains of Cooper Creek and the Diamantina and Georgina Rivers. The project has maintained links with the grazing community and has extensively drawn upon expert local experience and knowledge. The project has provided tools for managers to better anticipate the size of beneficial flooding arising from rains in the upper catchment and to more objectively assess the value of the pasture resulting from flooding. The latest information from the project has enabled customisation of the EDGENetwork™ Grazing Land Management training package for the Channel Country. In combination, these tools will assist in making earlier cattle stocking decisions, including when cattle may need to be mustered out of floodplain paddocks, how many additional cattle will be required to take advantage of the flood–grown pasture, and the timing of cattle turnoff. These will reduce costs by providing a greater lead time to plan cattle movements and purchases, and may enhance the sustainability of the resource base by better matching cattle numbers with the feed on offer.

Making More from Sheep Phase II : MMfS State Coordination – Queensland

Making More from Sheep (MMfS) is a majority market extension program funded by Meat & Livestock Australia (MLA) and Australian Wool Innovation (AWI). Phase II of MMfS commenced in Queensland with a business planning process in October 2010 and delivery from November 2010 until November 2013. Mr Tony Hamilton of the Department of Agriculture, Fisheries and Forestry (DAFF) was initially the State Coordinator with responsibility for planning, project implementation, monitoring and evaluation. He was replaced by Ms Nicole Sallur from DAFF towards the end of the project. Delivery involving partner organisations provided best practice management information and tools to sheep producers with target Key Performance Indicators (KPI’s) exceeded across all three tiers of engagement category. 31 events were delivered to 551 participants. Satisfaction and value scores averaged across all events measured 8.7 and 8.2 respectively. Operational recommendations have been included in the report.

Macadamia Regional Variety Trials Series 3 - Phase 2

Regional variety trials (RVT) established in 1983 and again in 1997 identified superior varieties for the macadamia industry. From the 1983 trials, guidelines were developed to assist growers to select the most appropriate new varieties for their particular orchards and many of these superior varieties have been enthusiastically adopted by industry. This is also being done for varieties in the 1997 trials. Many of the best cultivars have already been adopted by growers on the basis of annual reports of yield and quality. Industry development over the next 10 to 20 years will be largely dependent on new, superior varieties selected in these RVT5, including new selections from the macadamia industry breeding program.

DAQ00152 Herbicide Tolerance Screening in Northern Region (Phase IV)

The previous projects (phase I - III) highlighted that northern region wheat and barley cultivars differ considerably in their sensitivity to herbicides. The new project will focus on increased screening of advanced breeding lines and new cultivars lines to commonly used herbicides, for barley, chickpea and wheat. Studies on impact of environment on herbicide x genotype responses will also be undertaken with the national team. The new information will be added to the existing information package on herbicide tolerance. Thus, adverse impacts of herbicides on productivity in northern region will be reduced, as growers and agronomists will select safer herbicides for their sown variety, or select more tolerant varieties for their important herbicides.

Australian Herbicide Resistance Initiative (phase 4)

A national focus on strategic and applied research to minimise herbicide resistance in Australian cropping.

Central Queensland Sustainable Farming Systems - Phase 3

This project employed a participatory development and extension (D&E) approach involving on-farm trials and capacity- building activities to improve the economic and environmental performance of grain and mixed farming enterprises in central Queensland (CQ). The project's activities delivered (1) enhanced knowledge and understanding of key system variables that underpin grain and mixed farming businesses, and parameter values for these variables in relation to a range of environmental and management factors, (2) new and refined practices, technologies and management strategies to sustain the profitability of cropping and (3) products and information to support continuous improvement in farm business performance.

Farm Program Management - Phase II

Jointly manage The Farm Program within the Cotton Catchment Communities CRC.

Risk assessment and preventive strategies for herbicide resistance in NR (phase III)

The threat and management of glyphosate# resistant weeds are major issues facing northern region growers. At present five weeds are confirmed glyphosate-resistant: barnyard grass, liverseed grass, windmill grass, annual ryegrass and flaxleaf fleabane. This project used 25 experiments to investigate the ecology of the grass weeds, plus new or improved chemical and non-chemical control tactics for them. The refined glyphosate resistance model developed in this project used the experiments' findings to predict the long-term impacts on evolution of resistance and on seed bank numbers of resistant weeds. These data led to revised management and resistance avoidance strategies, which were published in the Reporter newsletter, and via an on-line risk assessment tool. - See more at: http://finalreports.grdc.com.au/UQ00054#sthash.oTkCN4Sk.dpuf

Herbicide tolerance of barley and wheat cultivars in NR (phase III)

During the past 10 years, this project tested 23 barley and 51 wheat varieties with 19 and 34 registered herbicides, respectively. It concentrated on new varieties and herbicides. The research highlighted that Northern Region (NR) wheat and barley varieties differed considerably in their sensitivity to these herbicides. Overall, 9 per cent of wheat variety x herbicide combinations and 6 per cent of barley variety x herbicide combinations had significant yield losses (3 to 38%) from herbicides at recommended rates and crop stages. In addition, 21 to 23 per cent had significant yield losses from herbicides at double rates, indicating a narrow margin of crop safety.