Establishment of an Australian mild onion industry - the sensory component

In recent years, there has been increasing interest from growers, merchants, supermarkets and consumers in the establishment of a national mild onion industry. Imperative to the success of the emergent industry is the application of the National Mild Onion Certification Scheme that will establish standards and recommendations to be met by growers to allow them to declare their product as certified mild onions. The use of sensory evaluation techniques has played an imperative role throughout the project timeline that has also included varietal evaluation, evaluation of current agronomic practices and correlation of chemical analysis data. Raw onion consumer acceptance testing on five different onion varieties established preferences amongst the varieties for odour, appearance, flavour, texture and overall and differences in the level of pungency and aftertaste perceived. Demographic information was obtained regarding raw and cooked onion use, frequency of consumption and responses to the idea of a mild, less pungent onion. Additionally, focus groups were conducted to further investigate consumer attitudes to onions. Currently, a trained onion panel is being established to evaluate several odour, flavour and aftertaste attributes. Sample assessments will be conducted in January 2004 and correlated with chemical analyses that will hopefully provide the corner-stone for the anticipated Certification Scheme.

Supply capability of sheep on the Mitchell grass downs of North and Central West Queensland

While, in the past, sheep have been predominantly reared and grazed in western Queensland for wool, interest in the sheep meat industry increased when wool prices became depressed. For north west and central west Queensland producers, opportunities may exist to participate in live sheep and meat export to Asia. The capability of the Mitchell grass downs to provide sufficient numbers of export quality sheep under the variable climatic conditions while sustaining the land resources has been simulated. Sheep numbers were found to be insufficient to maintain a consistent supply for live export. However, raising marking rates and lowering mortalities effectively increased reproductive performance to a level at which a surplus for export could be sustainable. Other practices might be required for the liveweight specifications to be met. 24th Biennial Conference. Adelaide, South Australia.

The reliability of supply of feed grains in the northern region

Reliability of supply of feed grain has become a high priority issue for industry in the northern region. Expansion by major intensive livestock and industrial users of grain, combined with high inter-annual variability in seasonal conditions, has generated concern in the industry about reliability of supply. This paper reports on a modelling study undertaken to analyse the reliability of supply of feed grain in the northern region. Feed grain demand was calculated for major industries (cattle feedlots, pigs, poultry, dairy) based on their current size and rate of grain usage. Current demand was estimated to be 2.8Mt. With the development of new industrial users (ethanol) and by projecting the current growth rate of the various intensive livestock industries, it was estimated that demand would grow to 3.6Mt in three years time. Feed grain supply was estimated using shire scale yield prediction models for wheat and sorghum that had been calibrated against recent ABS production data. Other crops that contribute to a lesser extent to the total feed grain pool (barley, maize) were included by considering their production relative to the major winter and summer grains, with estimates based on available production records. This modelling approach allowed simulation of a 101-year time series of yield that showed the extent of the impact of inter-annual climate variability on yield levels. Production estimates were developed from this yield time series by including planted crop area. Area planted data were obtained from ABS and ABARE records. Total production amounts were adjusted to allow for any export and end uses that were not feed grain (flour, malt etc). The median feed grain supply for an average area planted was about 3.1Mt, but this varied greatly from year to year depending on seasonal conditions and area planted. These estimates indicated that supply would not meet current demand in about 30% of years if a median area crop were planted. Two thirds of the years with a supply shortfall were El Nino years. This proportion of years was halved (i.e. 15%) if the area planted increased to that associated with the best 10% of years. Should demand grow as projected in this study, there would be few years where it could be met if a median crop area was planted. With area planted similar to the best 10% of years, there would still be a shortfall in nearly 50% of all years (and 80% of El Nino years). The implications of these results on supply/demand and risk management and investment in research and development are briefly discussed.

Standardising bull breeding soundness evaluations and reporting in Australia

There is substantial variation in bull breeding soundness evaluation procedures and reports in Australia; the situation is compounded by difficulties in interpretation and the validity of many reports. In an effort to overcome this, the scientific literature was reviewed [Fordyce G. In: Fordyce G, editor. Bull fertility: selection and management in Australia. Eight Mile Plains, Australia: Australian Cattle Vets; 2002] and the needs of stakeholders were considered in preparing a manual, Evaluating and Reporting Bull Fertility [Entwistle KW, Fordyce G. Evaluating and reporting bull fertility. Eight Mile Plains, Australia: Australian Cattle Vets; 2003.] that outlined standards for assessing and reporting bull breeding soundness. A new recording and reporting system, called Bull Reporter, is based on standards from this manual and groups bull fertility traits into five summary categories: Scrotum, Physical, Crush-side Semen, Sperm Morphology, and Serving. The client will generally select which categories they wish to have included in the evaluation to suit their specific purposes. While there is adequate room for comments, the veterinarian is not required to make an overall judgment of whether the bull has normal capacity to sire calves under natural mating management, but ensures the standards for each selected category are met. Professional, standardised, easy-to-read reports are produced either electronically [Entwistle KW, Fordyce G. Evaluating and reporting bull fertility. Eight Mile Plains, Australia: Australian Cattle Vets; 2003.] or manually. A bull owner or their agent signs the certificate to affirm that bulls have not undergone procedures to rectify faults which may have otherwise caused them to fail the standards. An accreditation system for assessing sperm morphology was established because of its demonstrated relationship with pregnancy rates and because of the difficulties in achieving consistent and accurate assessments among laboratories. It is considered that Bull Reporter is applicable to beef and dairy bulls across all levels of management, genotypes and environments throughout Australia, with substantial potential for application elsewhere in the world.

CIMMYT-selected derived synthetic bread wheats for rainfed environments: Yield evaluation in Mexico and Australia.

Synthetic backcrossed-derived bread wheats (SBWs) from CIMMYT were grown in the Northwest of Mexico at Centro de Investigaciones Agrícolas del Noroeste (CIANO) and sites across Australia during three seasons. During three consecutive years Australia received “shipments” of different SBWs from CIMMYT for evaluation. A different set of lines was evaluated each season, as new materials became available from the CIMMYT crop enhancement program. These consisted of approximately 100 advanced lines (F7) per year. SBWs had been top and backcrossed to CIMMYT cultivars in the first two shipments and to Australian wheat cultivars in the third one. At CIANO, the SBWs were trialled under receding soil moisture conditions. We evaluated both the performance of each line across all environments and the genotype-by-environment interaction using an analysis that fits a multiplicative mixed model, adjusted for spatial field trends. Data were organised in three groups of multienvironment trials (MET) containing germplasm from shipment 1 (METShip1), 2 (METShip2), and 3 (METShip3), respectively. Large components of variance for the genotype × environment interaction were found for each MET analysis, due to the diversity of environments included and the limited replication over years (only in METShip2, lines were tested over 2 years). The average percentage of genetic variance explained by the factor analytic models with two factors was 50.3% for METShip1, 46.7% for METShip2, and 48.7% for METShip3. Yield comparison focused only on lines that were present in all locations within a METShip, or “core” SBWs. A number of core SBWs, crossed to both Australian and CIMMYT backgrounds, outperformed the local benchmark checks at sites from the northern end of the Australian wheat belt, with reduced success at more southern locations. In general, lines that succeeded in the north were different from those in the south. The moderate positive genetic correlation between CIANO and locations in the northern wheat growing region likely reflects similarities in average temperature during flowering, high evaporative demand, and a short flowering interval. We are currently studying attributes of this germplasm that may contribute to adaptation, with the aim of improving the selection process in both Mexico and Australia.

The accuracy of varietal selection using factor analytic models for multi-environment plant breeding trials

Modeling of cultivar x trial effects for multienvironment trials (METs) within a mixed model framework is now common practice in many plant breeding programs. The factor analytic (FA) model is a parsimonious form used to approximate the fully unstructured form of the genetic variance-covariance matrix in the model for MET data. In this study, we demonstrate that the FA model is generally the model of best fit across a range of data sets taken from early generation trials in a breeding program. In addition, we demonstrate the superiority of the FA model in achieving the most common aim of METs, namely the selection of superior genotypes. Selection is achieved using best linear unbiased predictions (BLUPs) of cultivar effects at each environment, considered either individually or as a weighted average across environments. In practice, empirical BLUPs (E-BLUPs) of cultivar effects must be used instead of BLUPs since variance parameters in the model must be estimated rather than assumed known. While the optimal properties of minimum mean squared error of prediction (MSEP) and maximum correlation between true and predicted effects possessed by BLUPs do not hold for E-BLUPs, a simulation study shows that E-BLUPs perform well in terms of MSEP.

Evaluation of the most effective measures of infectivity of a precocious line of Eimeria acervulina in poultry

Coccidiosis is an economically important parasitic disease of chickens that, in Australia, is caused by seven species of the genus Eimeria.1 The disease has traditionally been controlled by prophylactic drugs, but vaccination with attenuated lines of the parasites2–4 is rapidly gaining acceptance world wide. Live Eimeria vaccines are produced in batches which are not frozen and have a limited shelf life. The per cent infectivity of vaccine seed stocks and the vaccines produced from them must therefore be accurately monitored using standardised dose dependant assays to ensure that shelf life, quality control and vaccine release specifications are met. Infectivity for the chicken host cannot readily be determined by microscopic observation of oocysts or sporocyst hatching.5 Dose dependent parameters such as body weight gain, feed conversion ratio, visual lesion scores, mortality, oocysts production, clinical symptoms and microscopic lesion counts could be used as measures of infectivity.6–11 These parameters show significant dose dependant effects with field strains, but lines of vaccine parasites that have been selected for precocious development with associated reduced virulence and reproductive capability may not have the same effect.3,4 The aim of this trial was to determine which parameters provide the most effective measures of infective dose in birds inoculated with a precocious vaccine strain.

Estimation in a multiplicative mixed model involving a genetic relationship matrix.

Genetic models partitioning additive and non-additive genetic effects for populations tested in replicated multi-environment trials (METs) in a plant breeding program have recently been presented in the literature. For these data, the variance model involves the direct product of a large numerator relationship matrix A, and a complex structure for the genotype by environment interaction effects, generally of a factor analytic (FA) form. With MET data, we expect a high correlation in genotype rankings between environments, leading to non-positive definite covariance matrices. Estimation methods for reduced rank models have been derived for the FA formulation with independent genotypes, and we employ these estimation methods for the more complex case involving the numerator relationship matrix. We examine the performance of differing genetic models for MET data with an embedded pedigree structure, and consider the magnitude of the non-additive variance. The capacity of existing software packages to fit these complex models is largely due to the use of the sparse matrix methodology and the average information algorithm. Here, we present an extension to the standard formulation necessary for estimation with a factor analytic structure across multiple environments.

A scientific approach to agent selection

The prioritisation of potential agents on the basis of likely efficacy is an important step in biological control because it can increase the probability of a successful biocontrol program, and reduce risks and costs. In this introductory paper we define success in biological control, review how agent selection has been approached historically, and outline the approach to agent selection that underpins the structure of this special issue on agent selection. Developing criteria by which to judge the success of a biocontrol agent (or program) provides the basis for agent selection decisions. Criteria will depend on the weed, on the ecological and management context in which that weed occurs, and on the negative impacts that biocontrol is seeking to redress. Predicting which potential agents are most likely to be successful poses enormous scientific challenges. 'Rules of thumb', 'scoring systems' and various conceptual and quantitative modelling approaches have been proposed to aid agent selection. However, most attempts have met with limited success due to the diversity and complexity of the systems in question. This special issue presents a series of papers that deconstruct the question of agent choice with the aim of progressively improving the success rate of biological control. Specifically they ask: (i) what potential agents are available and what should we know about them? (ii) what type, timing and degree of damage is required to achieve success? and (iii) which potential agent will reach the necessary density, at the right time, to exert the required damage in the target environment?

Functional dynamics of the nitrogen balance of sorghum. II. Grain filling period.

Maintenance of green leaf area during grain filling can increase grain yield of sorghum grown under terminal water limitation. This 'stay-green' trait has been related to the nitrogen (N) supply-demand balance during grain filling. This study quantifies the N demand of grain and N translocation rates from leaves and stem and explores effects of genotype and N stress on onset and rate of leaf senescence during the grain filling period. Three hybrids differing in potential height were grown at three levels of N supply under well-watered conditions. Vertical profiles of biomass, leaf area, and N% of leaves, stem and grain were measured at regular intervals. Weekly SPAD chlorophyll readings on main shoot leaves were correlated with observed specific leaf nitrogen (SLN) to derive seasonal patterns of leaf N content. For all hybrids, individual grain N demand was sink determined and was initially met through N translocation from the stem and rachis. Only if this was insufficient did leaf N translocation occur. Maximum N translocation rates from leaves and stem were dependent on their N status. However, the supply of N at canopy scale was also related to the amount of leaf area senescing at any one time. This supply-demand framework for N dynamics explained effects of N stress and genotype on the onset and rate of leaf senescence.

Spiny lobster aquaculture development in eastern Indonesia, Vietnam and Australia

The project was successful across all objectives, making demonstrable progress in support of establishing tropical lobster farming in Indonesia. The industry remains most active in Lombok where lobster seed resources are most abundant, and impact has been greatest there. Nevertheless, project activities have established activity and interest in lobster farming in other provinces and particularly Aceh and, South and Southeast Sulawesi. The project met all of its 23 milestones with the exception of publishing a production manual, which has been held over until 2017. For several milestone activities, further research will be required to build on the outcomes generated and reach practical commercial outputs. The research was instigated to address the opportunity to establish a significant small-holder based industry in Indonesia that could alleviate poverty in coastal communities. The premise was that such an industry – lobster farming, had been established in Vietnam, with ACIAR involvement, and it could be replicated in Indonesia where the availability of necessary basic requirements had been confirmed through a previous ACIAR project focussed in Vietnam (FIS/2001/058). The broad aim was to assess, develop and expand the resources of naturally settling lobster seed (puerulus), and develop grow out of those seed to meet export market demand. This was to be achieved by adapting and transferring to Indonesia technology from Vietnam, where lobster farming had become a successful industry producing 1,500 tonnes of export quality lobsters valued at $A100 million.

Evaluating the efficacy of the EZ-Ject herbicide system in Queensland, Australia

The EZ-Ject herbicide system was evaluated as a stem injection method for controlling woody weeds in a range of situations where traditional chemical application methods have limited scope. The equipment was trialled on three Queensland weed species; pond apple (Annona glabra), velvety tree pear (Opuntia tomentosa) and yellow oleander (Cascabela thevetia); at five different cartridge densities (0, 1, 2, 3 and 4) and with two herbicides (glyphosate and imazapyr). Cartridges filled with imazapyr were significantly more effective at controlling the three woody weed species than those filled with glyphosate. Injecting plants with three imazapyr cartridges resulted in plant kills ranging from 93 to 100%, compared with glyphosate kills of 17 to 100%. Pond apple was the most susceptible species, requiring one imazapyr cartridge or two glyphosate cartridges to kill 97 and 92% of the treated plants. Plant mortality increased as the number of cartridges injected increased. Mortality did not differ significantly for treatments receiving three and four imazapyr cartridges, as these cartridge densities met the criterion of injecting one cartridge per 10-cm basal circumference, a criterion recommended by the manufacturers for treating large plants (>6.35 cm in diameter at breast height). The cost of treating a weed infestation of 1500 plants ha–1 with three cartridges per tree is $1070 ha–1, with labour costs accounting for 16% of the total. The high chemical costs would preclude this technique from broad-scale use, but the method could have application for treating woody weeds in sensitive, high conservation areas.

Anthelmintic resistance in ovine gastrointestinal nematodes in inland southern Queensland

Objective To establish the prevalence of anthelmintic resistance in ovine gastrointestinal nematodes in southern Queensland. Design An observational parasitological study using the faecal egg count reduction test. Methods Sheep farms (n = 20) enrolled in this study met the twin criteria of using worm testing for drench decisions and having concerns about anthelmintic efficacy. On each farm, 105 sheep were randomly allocated to one of six treatment groups or an untreated control group. Faecal samples were collected on day 0 and days 10–14 for worm egg counts and larval differentiation. Single- and multi-combination anthelmintics, persistent and non-persistent, oral liquid or capsule, pour-on and injectable formulations were tested. Monepantel was not tested. Farmers also responded to a questionnaire on drenching practices. Results Haemonchus contortus was the predominant species. Efficacy <95% was recorded on 85% of farms for one or more anthelmintics and on 10% of farms for six anthelmintics. No resistance was identified on three farms. The 4-way combination product was efficacious (n = 4 farms). Napthalophos resistance was detected on one farm only. Resistance to levamisole (42% of farms), moxidectin injection (50% of farms) and the closantel/abamectin combination (67% of farms) was identified. Moxidectin oral was efficacious against Trichostrongylus colubriformis, which was predominant on only one farm. Of the farms tested, 55% ran meat breeds, 60% dosed more than the recommended dose rate and 70% always, mostly or when possible practised a ‘drench and move’ strategy. Conclusion This level of anthelmintic resistance in southern Queensland will severely compromise worm control and force increased use of monepantel.