Simulation of the supply capability of sheep on the Mitchell grass downs of north west Queensland

Sheep in western Queensland have been predominantly reared for wool. When wool prices became depressed interest in the sheep meat industry, increased. For north west Queensland producers, opportunities may exist to participate in live sheep and meat export to Asia. A simulation model was developed to determine whether this sheep producing area has the capability to provide sufficient numbers of sheep under variable climatic conditions while sustaining the land resources. Maximum capacity for sustainability of resources (as described by stock numbers) was derived from an in-depth study of the agricultural and pastoral potential of Queensland. Decades of sheep production and climatic data spanning differing seasonal conditions were collated for analysis. A ruminant biology model adapted from Grazplan was used to simulate pregnancy rate. Empirical equations predict mortalities, marking rates, and weight characteristics of sheep of various ages from simple climatic measures, stocking rate and reproductive status. The initial age structure of flocks was determined by running the model for several years with historical climatic conditions. Drought management strategies such as selling a proportion of wethers progressively down to two-tooth and oldest ewes were incorporated. Management decisions such as time of joining, age at which ewes were cast-for-age, wether turn-off age and turning-off rate of lambs vary with geographical area and can be specified at run time. The model is run for sequences of climatic conditions generated stochastically from distributions based on historical climatic data correlated in some instances. The model highlights the difficulties of sustaining a consistent supply of sheep under variable climatic conditions.

Standardising bull breeding soundness evaluations and reporting in Australia

There is substantial variation in bull breeding soundness evaluation procedures and reports in Australia; the situation is compounded by difficulties in interpretation and the validity of many reports. In an effort to overcome this, the scientific literature was reviewed [Fordyce G. In: Fordyce G, editor. Bull fertility: selection and management in Australia. Eight Mile Plains, Australia: Australian Cattle Vets; 2002] and the needs of stakeholders were considered in preparing a manual, Evaluating and Reporting Bull Fertility [Entwistle KW, Fordyce G. Evaluating and reporting bull fertility. Eight Mile Plains, Australia: Australian Cattle Vets; 2003.] that outlined standards for assessing and reporting bull breeding soundness. A new recording and reporting system, called Bull Reporter, is based on standards from this manual and groups bull fertility traits into five summary categories: Scrotum, Physical, Crush-side Semen, Sperm Morphology, and Serving. The client will generally select which categories they wish to have included in the evaluation to suit their specific purposes. While there is adequate room for comments, the veterinarian is not required to make an overall judgment of whether the bull has normal capacity to sire calves under natural mating management, but ensures the standards for each selected category are met. Professional, standardised, easy-to-read reports are produced either electronically [Entwistle KW, Fordyce G. Evaluating and reporting bull fertility. Eight Mile Plains, Australia: Australian Cattle Vets; 2003.] or manually. A bull owner or their agent signs the certificate to affirm that bulls have not undergone procedures to rectify faults which may have otherwise caused them to fail the standards. An accreditation system for assessing sperm morphology was established because of its demonstrated relationship with pregnancy rates and because of the difficulties in achieving consistent and accurate assessments among laboratories. It is considered that Bull Reporter is applicable to beef and dairy bulls across all levels of management, genotypes and environments throughout Australia, with substantial potential for application elsewhere in the world.

How effective are broad-scale nutrient mass balances for determining the sustainability of lot-feed manure application?

Nutrient mass balances have been used to assess a variety of land resource scenarios, at various scales. They are widely used as a simple basis for policy, planning, and regulatory decisions but it is not clear how accurately they reflect reality. This study provides a critique of broad-scale nutrient mass balances, with particular application to the fertiliser use of beef lot-feeding manure in Queensland. Mass balances completed at the district and farm scale were found to misrepresent actual manure management behaviour and potentially the risk of nutrient contamination of water resources. The difficulties of handling stockpile manure and concerns about soil compaction mean that manure is spread thickly over a few paddocks at a time and not evenly across a whole farm. Consequently, higher nutrient loads were applied to a single paddock less frequently than annually. This resulted in years with excess nitrogen, phosphorus, and potassium remaining in the soil profile. This conclusion was supported by evidence of significant nutrient movement in several of the soil profiles studied. Spreading manure is profitable, but maximum returns can be associated with increased risk of nutrient leaching relative to conventional inorganic fertiliser practices. Bio-economic simulations found this increased risk where manure was applied to supply crop nitrogen requirements (the practice of the case study farms, 200-5000 head lot-feeders). Thus, the use of broad-scale mass balances can be misleading because paddock management is spatially heterogeneous and this leads to increased local potential for nutrient loss. In response to the effect of spatial heterogeneity policy makers who intend to use mass balance techniques to estimate potential for nutrient contamination should apply these techniques conservatively.

Simulating pasture growth rates in Australian and New Zealand grazing systems

DairyMod, EcoMod, and the SGS Pasture Model are mechanistic biophysical models developed to explore scenarios in grazing systems. The aim of this manuscript was to test the ability of the models to simulate net herbage accumulation rates of ryegrass-based pastures across a range of environments and pasture management systems in Australia and New Zealand. Measured monthly net herbage accumulation rate and accumulated yield data were collated from ten grazing system experiments at eight sites ranging from cool temperate to subtropical environments. The local climate, soil, pasture species, and management (N fertiliser, irrigation, and grazing or cutting pattern) were described in the model for each site, and net herbage accumulation rates modelled. The model adequately simulated the monthly net herbage accumulation rates across the range of environments, based on the summary statistics and observed patterns of seasonal growth, particularly when the variability in measured herbage accumulation rates was taken into account. Agreement between modelled and observed growth rates was more accurate and precise in temperate than in subtropical environments, and in winter and summer than in autumn and spring. Similarly, agreement between predicted and observed accumulated yields was more accurate than monthly net herbage accumulation. Different temperature parameters were used to describe the growth of perennial ryegrass cultivars and annual ryegrass; these differences were in line with observed growth patterns and breeding objectives. Results are discussed in the context of the difficulties in measuring pasture growth rates and model limitations.

Summative evaluation of climate application activities with pastoralists in western Queensland

Survey methods were engaged to measure the change in use and knowledge of climate information by pastoralists in western Queensland. The initial mail survey was undertaken in 2000-01 (n=43) and provided a useful benchmark of pastoralists climate knowledge. Two years of climate applications activities were completed and clients were re-surveyed in 2003 (n=49) to measure the change in knowledge and assess the effectiveness of the climate applications activities. Two methods were used to assess changes in client knowledge, viz., self-assessment and test questions. We found that the use of seasonal climate forecasts in decision making increased from 36% in 2001 (n=42) to 51% in 2003 (n=49) (P=0.07). The self-assessment technique was unsatisfactory as a measure of changing knowledge over short periods (1-3 years), but the test question technique was successful and indicated an improvement in climate knowledge among respondents. The increased levels of use of seasonal climate forecasts in management and improved knowledge was partly attributed to the climate applications activities of the project. Further, those who used seasonal forecasting (n=25) didn't understand key components of forecasts (e.g. probability, median) better than those who didn't use seasonal forecasts (n=24) (P>0.05). This identifies the potential for misunderstanding and misinterpretation of forecasts among users and highlights the need for providers of forecasts to understand the difficulties and prepare simply written descriptions of forecasts and disseminate these with the maps showing probabilities. The most preferred means of accessing climate information were internet, email, 'The Season Ahead' newsletter and newspaper. The least preferred were direct contact with extension officers and attending field days and group meetings. Eighty-six percent of respondents used the internet and 67% used ADSL broadband internet (April 2003). Despite these findings, extension officers play a key role in preparing and publishing the information on the web, in emails and newsletters. We also believe that direct contact with extension officers trained in climate applications is desirable in workshop-like events to improve knowledge of the difficult concepts underpinning climate forecasts, which may then stimulate further adoption.

An evaluation of genetic analyses, skull morphology and visual appearance for assessing dingo purity: implications for dingo conservation

The introgression of domestic dog genes into dingo populations threatens the genetic integrity of 'pure' dingoes. However, dingo conservation efforts are hampered by difficulties in distinguishing between dingoes and hybrids in the field. This study evaluates consistency in the status of hybridisation (i.e. dingo, hybrid or dog) assigned by genetic analyses, skull morphology and visual assessments. Of the 56 south-east Queensland animals sampled, 39 (69.6%) were assigned the same status by all three methods, 10 (17.9%) by genetic and skull methods, four (7.1%) by genetic and visual methods; and two (3.6%) by skull and visual methods. Pair-wise comparisons identified a significant relationship between genetic and skull methods, but not between either of these and visual methods. Results from surveying 13 experienced wild dog managers showed that hybrids were more easily identified by visual characters than were dingoes. A more reliable visual assessment can be developed through determining the relationship between (1) genetics and phenotype by sampling wild dog populations and (2) the expression of visual characteristics from different proportions and breeds of domestic dog genes by breeding trials. Culling obvious hybrids based on visual characteristics, such as sable and patchy coat colours, should slow the process of hybridisation.

Advances in the culture of lobsters.

Commercial aquaculture of marine lobsters is an attractive proposition, as most species are high value with established market demand, and fishery production is static or diminishing. Nevertheless, achievement of commercial success will necessitate resolution of technical difficulties associated with on-growing of aggressive species (clawed lobsters) or with rearing the larvae, which for spiny and slipper lobsters is generally a painstaking and protracted process. Notwithstanding these technical challenges, increasing market demand for the product is driving a substantial research and development effort around the world to develop commercial lobster farming technology. This chapter reports on the status of that effort, the successes and obstacles.

Weed eradication - an economic perspective

There has been recent interest in determining the upper limits to the feasibility of weed eradication. Although a number of disparate factors determine the success of an eradication program, ultimately eradication feasibility must be viewed in the context of the amount of investment that can be made. The latter should reflect the hazard posed by an invasion, with greater investment justified by greater threats. In simplest terms, the effort (and hence investment) to achieve weed eradication comprises the detection effort required to delimit an invasion plus the search and control effort required to prevent reproduction until extirpation occurs over the entire infested area. The difficulty of estimating the required investment at the commencement of a weed eradication program (as well as during periodic reviews) is a serious problem. Bioeconomics show promise in determining the optimal approach to managing weed invasions, notwithstanding ongoing difficulties in estimating the costs and benefits of eradication and alternative invasion management strategies. A flexible approach to the management of weed invasions is needed, allowing for the adoption of another strategy when it becomes clear that the probability of eradication is low, owing to resourcing or intractable technical issues. Whether the considerable progress that has been achieved towards eradication of the once massive witchweed invasion can be duplicated for other weeds of agricultural systems will depend to a large extent upon investment (. $250 million over 50 yr in this instance). Weeds of natural ecosystems seem destined to remain more difficult eradication targets for a variety of reasons, including higher impedance to eradication, more difficulty in valuing the benefits arising from eradication, and possibly less willingness to pay from society at large.

Processing Tomato Production in the Burdekin: Opportunities and Risks for Growers

The research undertaken here was in response to a decision by a major food producer in about 2009 to consider establishing processing tomato production in northern Australia. This was in response to a lack of water availability in the Goulburn Valley region following the extensive drought that continued until 2011. The high price of water and the uncertainty that went with it was important in making the decision to look at sites within Queensland. This presented an opportunity to develop a tomato production model for the varieties used in the processing industry and to use this as a case study along with rice and cotton production. Following some unsuccessful early trials and difficulties associated with the Global Financial Crisis, large scale studies by the food producer were abandoned. This report uses the data that was collected prior to this decision and contrasts the use of crop modelling with simpler climatic analyses that can be undertaken to investigate the impact of climate change on production systems. Crop modelling can make a significant contribution to our understanding of the impacts of climate variability and climate change because it harnesses the detailed understanding of physiology of the crop in a way that statistical or other analytical approaches cannot do. There is a high overhead, but given that trials are being conducted for a wide range of crops for a variety of purposes, breeding, fertiliser trials etc., it would appear to be profitable to link researchers with modelling expertise with those undertaking field trials. There are few more cost-effective approaches than modelling that can provide a pathway to understanding future climates and their impact on food production.

Screening bacterial metabolites for inhibitory effects against Batrachochytrium dendrobatidis using a spectrophotometric assay

Certain bacteria present on frog skin can prevent infection by the pathogenic fungus Batrachochytrium dendrobatidis (Bd), conferring disease resistance. Previous studies have used agar-based in vitro challenge assays to screen bacteria for Bd-inhibitory activity and to identify candidates for bacterial supplementation trials. However, agar-based assays can be difficult to set up and to replicate reliably. To overcome these difficulties, we developed a semi-quantitative spectrophotometric challenge assay technique. Cell-free supernatants were prepared from filtered bacterial cultures and added to 96-well plates in replicated wells containing Bd zoospores suspended in tryptone-gelatin hydrolysate-lactose (TGhL) broth medium. Plates were then read daily on a spectrophotometer until positive controls reached maximum growth in order to determine growth curves for Bd. We tested the technique by screening skin bacteria from the Australian green-eyed tree frog Litoria serrata. Of bacteria tested, 31% showed some degree of Bd inhibition, while some may have promoted Bd growth, a previously unknown effect. Our cell-free supernatant challenge assay technique is an effective in vitro method for screening bacterial isolates for strong Bd-inhibitory activity. It contributes to the expanding field of bioaugmentation research, which could play a significant role in mitigating the effects of chytridiomycosis on amphibians around the world.

Sustainable management for rangelands in a variable climate: evidence and insights from northern Australia

Inter-annual rainfall variability is a major challenge to sustainable and productive grazing management on rangelands. In Australia, rainfall variability is particularly pronounced and failure to manage appropriately leads to major economic loss and environmental degradation. Recommended strategies to manage sustainably include stocking at long-term carrying capacity (LTCC) or varying stock numbers with forage availability. These strategies are conceptually simple but difficult to implement, given the scale and spatial heterogeneity of grazing properties and the uncertainty of the climate. This paper presents learnings and insights from northern Australia gained from research and modelling on managing for rainfall variability. A method to objectively estimate LTCC in large, heterogeneous paddocks is discussed, and guidelines and tools to tactically adjust stocking rates are presented. The possible use of seasonal climate forecasts (SCF) in management is also considered. Results from a 13-year grazing trial in Queensland show that constant stocking at LTCC was far more profitable and largely maintained land condition compared with heavy stocking (HSR). Variable stocking (VAR) with or without the use of SCF was marginally more profitable, but income variability was greater and land condition poorer than constant stocking at LTCC. Two commercial scale trials in the Northern Territory with breeder cows highlighted the practical difficulties of variable stocking and provided evidence that heavier pasture utilisation rates depress reproductive performance. Simulation modelling across a range of regions in northern Australia also showed a decline in resource condition and profitability under heavy stocking rates. Modelling further suggested that the relative value of variable v. constant stocking depends on stocking rate and land condition. Importantly, variable stocking may possibly allow slightly higher stocking rates without pasture degradation. Enterprise-level simulations run for breeder herds nevertheless show that poor economic performance can occur under constant stocking and even under variable stocking in some circumstances. Modelling and research results both suggest that a form of constrained flexible stocking should be applied to manage for climate variability. Active adaptive management and research will be required as future climate changes make managing for rainfall variability increasingly challenging.

Planet of the cavendish - understanding the domination

Those seeking to bring change to cultivars sold in the banana markets of the world have encountered major difficulties over the years. Change has been sought because of production difficulties caused by banana diseases such as Fusarium wilt or a desire to invigorate a stagnant market and obtain a competitive advantage by the introduction of diversity of product. Currently the world banana scene is dominated by cultivars from the Cavendish subgroup with their production in excess of 40% of total world production of banana and plantain combined, and in most western countries Cavendish is synonymous with banana. But Cavendish production usually necessitates very regular applications of pesticides, particularly fungicides for Mycosphaerella leaf spots control. So genetic resistance to these and other diseases would be very beneficial to minimizing costs of production, as well as reducing health risks to banana workers and the general population and minimizing impacts on the environment. In recent years, the overall market sales of some crops, such as tomatoes, have increased by providing diversity of cultivars to consumers. Can the same be done for banana? Perhaps a better understanding of how we have arrived at our current situation and the forces that have shaped our preference for Cavendish will allow us to plan more strategic crop improvement research which has enhanced chances of adoption by the banana industries of the world. A scoping study was recently undertaken in Australia to determine the current market opportunity for alternative cultivars and provide a roadmap for the industry to successfully develop this market. A multidisciplinary team reviewed the literature, surveyed the supply chain, analyzed gross margins and conducted consumer and sensory evaluations of 'new' cultivars. This has provided insight on why Cavendish dominates the market, which is the focus of this paper, and we believe will provide a solid foundation for future progress.

Development of a Rapid Multiplex PCR Assay To Genotype Pasteurella multocida Strains by Use of the Lipopolysaccharide Outer Core Biosynthesis Locus

Pasteurella multocida is a Gram-negative bacterial pathogen that is the causative agent of a wide range of diseases in many animal species, including humans. A widely used method for differentiation of P. multocida strains involves the Heddleston serotyping scheme. This scheme was developed in the early 1970s and classifies P. multocida strains into 16 somatic or lipopolysaccharide (LPS) serovars using an agar gel diffusion precipitin test. However, this gel diffusion assay is problematic, with difficulties reported in accuracy, reproducibility, and the sourcing of quality serovar-specific antisera. Using our knowledge of the genetics of LPS biosynthesis in P. multocida, we have developed a multiplex PCR (mPCR) that is able to differentiate strains based on the genetic organization of the LPS outer core biosynthesis loci. The accuracy of the LPS-mPCR was compared with classical Heddleston serotyping using LPS compositional data as the "gold standard." The LPS-mPCR correctly typed 57 of 58 isolates; Heddleston serotyping was able to correctly and unambiguously type only 20 of the 58 isolates. We conclude that our LPS-mPCR is a highly accurate LPS genotyping method that should replace the Heddleston serotyping scheme for the classification of P. multocida strains.

Life cycle and host range of Phycitasp. rejected for biological control of prickly acacia in Australia

Prickly acacia (Vachellia nilotica subsp. indica), a native of the Indian subcontinent, is a serious weed of the grazing areas of northern Australia and is a target for classical biological control. Native range surveys in India identified a leaf webber, Phycita sp. (Lepidoptera: Pyralidae) as a prospective biological control agent for prickly acacia. In this study, we report the life cycle and host-specificity test results Phycita sp. and highlight the contradictory results between the no-choice tests in India and Australia and the field host range in India. In no-choice tests in India and Australia, Phycita sp. completed development on two of 11 and 16 of 27 non-target test plant species, respectively. Although Phycita sp. fed and completed development on two non-target test plant species (Vachellia planifrons and V. leucophloea) in no-choice tests in India, there was no evidence of the insect on the two non-target test plant species in the field. Our contention is that oviposition behaviour could be the key mechanism in host selection of Phycita sp., resulting in its incidence only on prickly acacia in India. This is supported by paired oviposition choice tests involving three test plant species (Acacia baileyana, A. mearnsii and A. deanei) in quarantine in Australia, where eggs were laid only on prickly acacia. However, in paired oviposition choice trials, only few eggs were laid, making the results unreliable. Although oviposition choice tests suggest that prickly acacia is the most preferred and natural host, difficulties in conducting choice oviposition tests with fully grown trees under quarantine conditions in Australia and the logistic difficulties of conducting open-field tests with fully grown native Australian plants in India have led to rejection of Phycita sp. as a potential biological control agent for prickly acacia in Australia.

Otolith morphology of four mackerel species (Scomberomorus spp.) in Australia: Species differentiation and prediction for fisheries monitoring and assessment

Four species of large mackerels (Scomberomorus spp.) co-occur in the waters off northern Australia and are important to fisheries in the region. State fisheries agencies monitor these species for fisheries assessment; however, data inaccuracies may exist due to difficulties with identification of these closely related species, particularly when specimens are incomplete from fish processing. This study examined the efficacy of using otolith morphometrics to differentiate and predict among the four mackerel species off northeastern Australia. Seven otolith measurements and five shape indices were recorded from 555 mackerel specimens. Multivariate modelling including linear discriminant analysis (LDA) and support vector machines, successfully differentiated among the four species based on otolith morphometrics. Cross validation determined a predictive accuracy of at least 96% for both models. An optimum predictive model for the four mackerel species was an LDA model that included fork length, feret length, feret width, perimeter, area, roundness, form factor and rectangularity as explanatory variables. This analysis may improve the accuracy of fisheries monitoring, the estimates based on this monitoring (i.e. mortality rate) and the overall management of mackerel species in Australia.