Influence of cyclonic winds on the performance of hardwood plantations in tropical north Queensland.

Severe Tropical Cyclone Yasi crossed the far north Queensland coast at Mission Beach on February 3rd, 2011, shattering the regions developing hardwood plantation industry. The cyclone’s path covered the primary areas of hardwood and softwood plantations in this region, causing widespread destruction. The extent of cyclone damage, coupled with the weak international economy has resulted in a severe decline in industry confidence for the future of timber plantations in this region. This report reviews the impacts of Severe TC Yasi on the performance of key hardwood plantation species in north Queensland. It summarises the influence of species, genetics, plantation design, management and age on plantation resilience. The information will contribute to a “Best Practice Guide for Timber Plantations in Cyclonic Areas” to be produced by Timber Queensland. This will assist companies with future plantation investment decisions in the tropical cyclone zone. 2 200 trees were assessed, including 44 species at 32 localities located from Daintree to Townsville. Data are also presented for a post-cyclone assessment of 5 900 African mahogany trees on four sites in the Ingham region. A report prepared for the Timber Queensland project: Best Practice Guide for Timber Plantations in Cyclonic Areas.

The process for implementation of a Quality Management System within a multi-functional cereal laboratory

The intent of this study was to design, document and implement a Quality Management System (QMS) into a laboratory that incorporated both research and development (R&D) and routine analytical activities. In addition, it was necessary for the QMS to be easily and efficiently maintained to: (a) provide documented evidence that would validate the system's compliance with a certifiable standard, (b) fit the purpose of the laboratory, (c) accommodate prevailing government policies and standards, and (d) promote positive outcomes for the laboratory through documentation and verification of the procedures and methodologies implemented. Initially, a matrix was developed that documented the standards' requirements and the necessary steps to be made to meet those requirements. The matrix provided a check mechanism on the progression of the system's development. In addition, it was later utilised in the Quality Manual as a reference tool for the location of full procedures documented elsewhere in the system. The necessary documentation to build and monitor the system consisted of a series of manuals along with forms that provided auditable evidence of the workings of the QMS. Quality Management (QM), in one form or another, has been in existence since the early 1900's. However, the question still remains: is it a good thing or just a bugbear? Many of the older style systems failed because they were designed by non-users, fiercely regulatory, restrictive and generally deemed to be an imposition. It is now considered important to foster a sense of ownership of the system by the people who use the system. The system's design must be tailored to best fit the purpose of the operations of the facility if maximum benefits to the organisation are to be gained.

Incorporating dugong habitats into the marine protected area design for the Great Barrier Reef Marine Park, Queensland, Australia.

Dugong habitats were considered in the design for the new zoning network for the Great Barrier Reef Marine Park as part of the Representative Areas Program. One of the specific design guidelines developed as part of the biophysical operational principles recommended that 50% of all high priority dugong habitats should be incorporated in the network of no-take areas. The high priority dugong habitat incorporated in no-take protection increased from 1396 to 3476 km2 (or 16.9-42.0% of all identified sites). Although this increase in protection fell short of the recommended 50%, overall the level of protection afforded by the Great Barrier Reef Marine Park Zoning Plan 2003 increased for all the locations identified.

Developments in termite management in Queensland, Australia: Life after Cyclodienes (Isoptera)

The highly persistent cyclodiene (organochlorine) insecticides (aldrin, dieldrin, chlordane and heptachlor), the main termiticides used in Australia for 30 years, were withdrawn from use in most of Australia on 30 June 1995. Alternative strategies for subterranean termite management in buildings and other structures had been under development, well before this withdrawal. Here we focus on these and subsequent developments in subterranean termite management, relevant to Queensland, including a national survey, relevant building regulations, approvals and changes in the Australian Standards on termite management. Developments including a national training and competency-based-licensing system for pest managers, insurance of dwellings against termite damage and several alternative termite management strategies are discussed. An integrated approach to termite management is the likely direction for the future in Australia, minimising reliance on chemical sprays and drenches. There will be an increased need for physical barriers in improved building design and reliable preventative and remedial treatments involving bait technology. The need for research on termite biology and, in particular, foraging behavior is emphasized yet again.

A collaborative design to adaptively manage for landscape sustainability in north Australia: lessons from a decade of cooperative research

Approaches to manage for the sustainable use of natural and cultural resources in a landscape can have many different designs. One design is adaptive collaborative landscape management (ACLM) where research providers and users work closely together on projects to develop resources while adaptively managing to sustain or maintain landscapes in the long term. We propose that collaborative projects are more useful for achieving outcomes than integrative projects where participants merely join their separate contributions. To foster collaborative research projects to adaptively manage landscapes in northern Australia, a Tropical Savannas Cooperative Research Centre (TSCRC) was established in 1995. The TSCRC is a joint venture of major organizations involved in research and land management. This paper is our perspective on the four most important 'lessons learned' after using a ACLM-type approach for over 10 y. We learnt that collaboration (working in combination) not necessarily integration (combining parts into a whole) achieved sustainable outcomes. We found that integration across culturally diverse perspectives seldom achieved sustainable solutions because it devalued the position of the less empowered participants. In addition, positive outcomes were achieved when participants developed trust and respect for each other by embracing and respecting their differences and by sharing unifying concepts such as savanna health. Another lesson learned was that a collaborative organization must act as an honest broker by resisting advocacy of one view point over another. Finally, we recognized the importance of strongly investing in communication and networking so that people could adaptively learn from one another's experiences, understand each other's challenges and respect each other's choices. Our experience confirms the usefulness of the ACLM approach and highlights its role in the process of sustaining healthy landscapes.

Long-term impacts of harvest residue management on nutrition, growth and productivity of an exotic pine plantation of sub-tropical Australia

Residue retention is an important issue in evaluating the sustainability of production forestry. However, its long-term impacts have not been studied extensively, especially in sub-tropical environments. This study investigated the long-term impact of harvest residue retention on tree nutrition, growth and productivity of a F1 hybrid (Pinus elliottii var. elliottii × Pinus caribaea var. hondurensis) exotic pine plantation in sub-tropical Australia, under three harvest residue management regimes: (1) residue removal, RR0; (2) single residue retention, RR1; and (3) double residue retention, RR2. The experiment, established in 1996, is a randomised complete block design with 4 replicates. Tree growth measurements in this study were carried out at ages 2, 4, 6, 8 and 10 years, while foliar nutrient analyses were carried out at ages 2, 4, 6 and 10 years. Litter production and litter nitrogen (N) and phosphorus (P) measurements were carried out quarterly over a 15-month period between ages 9 and 10 years. Results showed that total tree growth was still greater in residue-retained treatments compared to the RR0 treatment. However, mean annual increments of diameter at breast height (MAID) and basal area (MAIB) declined significantly after age 4 years to about 68-78% at age 10 years. Declining foliar N and P concentrations accounted for 62% (p < 0.05) of the variation of growth rates after age 4 years, and foliar N and P concentrations were either marginal or below critical concentrations. In addition, litter production, and litter N and P contents were not significantly different among the treatments. This study suggests that the impact of residue retention on tree nutrition and growth rates might be limited over a longer period, and that the integration of alternative forest management practices is necessary to sustain the benefits of harvest residues until the end of the rotation.

A generic design environment for the rural industry knowledge acquisition

This paper describes a new knowledge acquisition method using a generic design environment where context-sensitive knowledge is used to build specific DSS for rural business. Although standard knowledge acquisition methods have been applied in rural business applications, uptake remains low and familiar weaknesses such as obsolescence and brittleness apply. We describe a decision support system (DSS) building environment where contextual factors relevant to the end users are directly taken into consideration. This "end user enabled design environment" (EUEDE) engages both domain experts in creating an expert knowledge base and business operators/end users (such as farmers) in using this knowledge for building their specific DSS. We document the knowledge organisation for the problem domain, namely a dairy industry application. This development involved a case-study research approach used to explore dairy operational knowledge. In this system end users can tailor their decision-making requirements using their own judgement to build specific DSSs. In a specific end user's farming context, each specific DSS provides expert suggestions to assist farmers in improving their farming practice. The paper also shows the environment's generic capability.

A Practitioner-Oriented Decision Support Process for Forestry Pest Management

The article discusses a new decision support process for forestry pest management. Over the past few years, DSS have been introduced for forestry pest management, providing forest growers with advice in areas such as selecting the most suitable pesticide and relevant treatment. Most of the initiatives process knowledge from various domains for providing support for specific decision making problems. However, very few studies have identified the requirements of developing a combined process model in which all relevant practitioners can contribute and share knowledge for effective decision making; such an approach would need to include the decision makers’ perspective along with other relevant attributes such as the problem context and relevant policies. We outline a decision support process for forestry pest management, based on the design science research paradigm, in which a focus group technique has application to acquire both expert and practical knowledge in order to construct the DSS solution.

Wild dogma II: the role and implications of wild dogma for wild dog management in Australia

The studies of Allen (2011) and Allen et al. (2011) recently examined the methodology underpinning claims that dingoes provide net benefits to biodiversity by suppressing foxes and cats. They found most studies to have design flaws and/or observational methods that preclude valid interpretations from the data, describing most of the current literature as ‘wild dogma’. In this short supplement, we briefly highlight the roles and implications of wild dogma for wild dog management in Australia. We discuss nomenclature, and the influence that unreliable science can have on policy and practice changes related to apex predator management.

Male traits and herd reproductive capability in tropical beef cattle. 1. Experimental design and animal measures

Research into the genetics of whole herd profitability has been a focus of the Beef Cooperative Research Centre for Beef Genetic Technologies over the past decade and it has been identified that measures of male reproduction may offer a potential indirect means of selecting for improved female reproduction. This paper describes the experimental design and provides a descriptive analysis of an array of male traits in Brahman and Tropical Composite genotypes managed under the medium to high stress, semi-extensive to extensive production systems of northern Australia. A total of 1639 Brahman and 2424 Tropical Composite bulls with known pedigrees, bred and raised in northern Australia, were evaluated for a comprehensive range of productive and reproductive traits. These included blood hormonal traits (luteinising hormone, inhibin and insulin-like growth factor-I); growth and carcass traits (liveweight, body condition score, ultrasound scanned 12-13th rib fat, rump P8 fat, eye muscle area and hip height); adaptation traits (flight time and rectal temperature); and a bull breeding soundness evaluation (leg and hoof conformation, sheath score, length of everted prepuce, penile anatomy, scrotal circumference, semen mass activity, sperm motility and sperm morphology). Large phenotypic variation was evident for most traits, with complete overlap between genotypes, indicating that there is likely to be a significant opportunity to improve bull fertility traits through management and bull selection.

Crop design for specific adaptation in variable dryland production environments

Climatic variability in dryland production environments (E) generates variable yield and crop production risks. Optimal combinations of genotype (G) and management (M) depend strongly on E and thus vary among sites and seasons. Traditional crop improvement seeks broadly adapted genotypes to give best average performance under a standard management regime across the entire production region, with some subsequent manipulation of management regionally in response to average local environmental conditions. This process does not search the full spectrum of potential G × M × E combinations forming the adaptation landscape. Here we examine the potential value (relative to the conventional, broad adaptation approach) of exploiting specific adaptation arising from G × M × E. We present an in-silico analysis for sorghum production in Australia using the APSIM sorghum model. Crop design (G × M) is optimised for subsets of locations within the production region (specific adaptation) and is compared with the optimum G across all environments with locally modified M (broad adaptation). We find that geographic subregions that have frequencies of major environment types substantially different from that for the entire production region show greatest advantage for specific adaptation. Although the specific adaptation approach confers yield and production risk advantages at industry scale, even greater benefits should be achievable with better predictors of environment-type likelihood than that conferred by location alone.