Characterisation of wood properties and transverse anatomy for vacuum drying modelling of commercially important Australian hardwood species.

Characterisation and investigation of a number of key wood properties, critical for further modelling work, has been achieved. The key results were: • Morphological characterisation, in terms of fibre cell wall thickness and porosity, was completed. A clear difference in fibre porosity, size, wall thickness and orientation was evident between species. Results were consistent with published data for other species. • Viscoelastic properties of wood were shown to differ greatly between species and in the radial and tangential directions, largely due to anatomical and chemical variations. Consistent with published data, the radial direction shows higher stiffness, internal friction and glass transition temperature than the tangential directions. The loss of stiffness over the measured temperature range was greater in the tangential direction than the radial direction. Due to time dependant molecular relaxation, the storage modulus and glass transition temperature decreased with decreasing test frequency, approaching an asymptotic limit. Thus the viscoelastic properties measured at lower frequencies are more representative of static material. • Dynamic interactions between relative humidity, moisture content and shrinkage of four Australian hardwood timbers can be accurately monitored on micro-samples using a specialised experimental device developed by AgroParisTech – ENGREF. The device generated shrinkage data that varied between species but were consistent (repeatable) within a species. Collapse shrinkage was clearly evident with this method for Eucalyptus obliqua, but not with other species, consistent with industrial seasoning experience. To characterise the wood-water relations of this species, free of collapse, thinner sample sections (in the R-T plane) should be used.

Host Tree Influences on Longicorn Beetle (Coleoptera: Cerambycidae) Attack in Subtropical Corymbia (Myrtales: Myrtaceae)

Phoracantha longicorn beetles are endemic to Australia, and some species have become significant pests of eucalypts worldwide, yet little is known about their host plant interactions and factors influencing tree susceptibility in Australia. Here, we investigate the host relationships of Phoracantha solida (Blackburn, 1894) on four eucalypt taxa (one pure species and three hybrid families), examining feeding site physical characteristics including phloem thickness, density, and moisture content, and host tree factors such as diameter, height, growth, taper, and survival. We also determine the cardinal and vertical (within-tree) and horizontal (between-tree) spatial distribution of borers. Fewer than 10% of P. solida attacks were recorded from the pure species (Corymbia citriodora subsp. variegate (Hook)), and this taxon also showed the highest survival, phloem thickness, relative growth rate, and bark:wood area. For the two most susceptible taxa, borer severity was negatively correlated with moisture content, and positively related to phloem density. Borers were nonrandomly and nonuniformly distributed within trees, and were statistically aggregated in 32% of plots. More attacks were situated on the northern side of the tree than the other aspects, and most larvae fed within the lower 50 cm of the bole, with attack height positively correlated with severity. Trees with borers had more dead neighbors, and more bored neighbors, than trees without borers, while within plots, borer incidence and severity were positively correlated. Because the more susceptible taxa overlapped with less susceptible taxa for several physical tree factors, the role of primary and secondary chemistries in determining host suitability needs to be investigated. Nevertheless, taxon, moisture content, phloem density, tree size, and mortality of neighboring trees appeared the most important physical characteristics influencing host suitability for P. solida at this site.

New synonymies for Australian Cleridae (Coleoptera)

The following synonymies are proposed based on examination of primary types (lectotypes are designated for all taxa except those marked with a '*'): Lemidia spinnipennis Lea, 1907 syn. n. and Lemidia bicolor Schenkling, 1906 syn. n. = Lemidia biaculeata (Westwood); Lemidia mastersi Lea, 1907 syn. n. = Lemidia circumcincta Schenkling, 1906; Lemidia albonotata Pic, 1941 syn. n. = Lemidia laticeps Lea, 1907; Lemidia australiae Lea, 1907 syn. n. = Lemidia maculata Schenkling, 1902; Lemidia bilineatra Lea, 1907 syn. n. = Lemidia maculicollis Gorham, 1877; Lemidia decolor Pic, 1941 syn. n. = Lemidia munda Blackburn, 1892; *Phlogistus conspiciendus Elston, 1926 syn. n. = Mimolesterus ventralis (Westwood); Thanasimus cursorius Westwood, 1853 syn. n. and Stigmatium dispar Kuwert, 1894 syn. n. = Stigmatium acerbum (Newman); Stigmatium fasciatoventre Chevrolat, 1874 syn. n., Stigmatium flavescens Chevrolat, 1874 syn. n. and *Xestonotus eximius Kuwert, 1894 syn. n. = Stigmatium laevium Macleay, 1872; Stigmatium versipelle Gorham, 1876 syn. n. and Xestonotus (Cyclotomocerus) australicus Kuwert, 1894 syn. n. = Stigmatium varipes Chevrolat, 1876; Tarsostenus pulcher Macleay, 1872 syn. n. = *Tarsostenus carus (Newman, 1840). The available name Tarsosternus pulcher Macleay, 1872 is deemed a lapsus calami and emended to Tarsostenus pulcher Macleay, 1872.