Fate of applied biosolids nitrogen in a cut and remove forage system on an alluvial clay loam soil

The fate of nitrogen (N) applied in biosolids was investigated in a forage production system on an alluvial clay loam soil in south-eastern Queensland, Australia. Biosolids were applied in October 2002 at rates of 6, 12, 36, and 54dryt/ha for aerobically digested biosolids (AE) and 8, 16, 48, and 72dryt/ha for anaerobically digested biosolids (AN). Rates were based on multiples of the Nitrogen Limited Biosolids Application rate (0.5, 1, 3, and 4.5NLBAR) for each type of biosolid. The experiment included an unfertilised control and a fertilised control that received multiple applications of synthetic fertiliser. Forage sorghum was planted 1 week after biosolids application and harvested 4 times between December 2002 and May 2003. Dry matter production was significantly greater from the biosolids-treated plots (21-27t/ha) than from the unfertilised (16t/ha) and fertilised (18t/ha) controls. The harvested plant material removed an extra 148-488kg N from the biosolids-treated plots. Partial N budgets were calculated for the 1NLBAR and 4.5NLBAR treatments for each biosolids type at the end of the crop season. Crop removal only accounted for 25-33% of the applied N in the 1NLBAR treatments and as low as 8-15% with 4.5NLBAR. Residual biosolids N was predominantly in the form of organic N (38-51% of applied biosolids N), although there was also a significant proportion (10-23%) as NO3-N, predominantly in the top 0.90m of the soil profile. From 12 to 29% of applied N was unaccounted for, and presumed to be lost as gaseous nitrogen and/or ammonia, as a consequence of volatilisation or denitrification, respectively. In-season mineralisation of organic N in biosolids was 43-59% of the applied organic N, which was much greater than the 15% (AN)-25% (AE) expected, based on current NLBAR calculation methods. Excessive biosolids application produced little additional biomass but led to high soil mineral N concentrations that were vulnerable to multiple loss pathways. Queensland Guidelines need to account for higher rates of mineralisation and losses via denitrification and volatilisation and should therefore encourage lower application rates to achieve optimal plant growth and minimise the potential for detrimental impacts on the environment.

A promising and simple method to quantify soil/manure mixing on beef feedlot pens

On beef cattle feed pen surfaces, fresh and decayed manure is mixed with base rock or soil (base). Quantifying this mixing has beneficial applications for aspects including nutrient and greenhouse gas budgeting. However, no practical methods exist to quantify mixing. We investigated if measuring element concentrations in: (A) fresh manure, (B) base material, and (C) pen manure offers a promising method to quantify manure/base mixing on pen surfaces. Using three operational beef feedlots as study sites, we targeted carbon (C), and silicon (Si), which are the two most abundant and easily measurable organic and inorganic elements. Our results revealed that C concentrations were strongly (>15 times) and significantly (P < 0.05) higher whereas Si concentrations strongly (>10 times) and significantly (P < 0.01) lower in fresh manure than base material at all three sites. These relative concentrations were not significantly impacted by manure decay, as determined by an 18-week incubation experiment. This suggested that both of these elements are suitable markers for quantifying base/manure mixing on pens. However, due to the chemical change of manure during decay, C was shown to be an imprecise marker of base/manure mixing. By contrast, using Si to estimate base/manure mixing was largely unaffected by manure decay. These findings were confirmed by measuring C and Si concentrations in stockpiled pen surface manure from one of the sites. Using Si concentrations is a promising approach to quantify base/manure mixing on feed pens given that this element is abundantly concentrated in soils and rocks.

Temporal variation in arthropod sampling effectiveness: The case for using the beat sheet method in cotton

Predatory insects and spiders are key elements of integrated pest management (IPM) programmes in agricultural crops such as cotton. Management decisions in IPM programmes should to be based on a reliable and efficient method for counting both predators and pests. Knowledge of the temporal constraints that influence sampling is required because arthropod abundance estimates are likely to vary over a growing season and within a day. Few studies have adequately quantified this effect using the beat sheet, a potentially important sampling method. We compared the commonly used methods of suction and visual sampling to the beat sheet, with reference to an absolute cage clamp method for determining the abundance of various arthropod taxa over 5 weeks. There were significantly more entomophagous arthropods recorded using the beat sheet and cage clamp methods than by using suction or visual sampling, and these differences were more pronounced as the plants grew. In a second trial, relative estimates of entomophagous and phytophagous arthropod abundance were made using beat sheet samples collected over a day. Beat sheet estimates of the abundance of only eight of the 43 taxa examined were found to vary significantly over a day. Beat sheet sampling is recommended in further studies of arthropod abundance in cotton, but researchers and pest management advisors should bear in mind the time of season and time of day effects.

Sustaining productivity of a Vertosol at Warra, Queensland, with fertilisers, no-tillage or legumes. 9. Production and nitrogen benefits from mixed grass and legume pastures in rotation with wheat

Reduced supplies of nitrogen (N) in many soils of southern Queensland that were cropped exhaustively with cereals over many decades have been the focus of much research to avoid declines in profitability and sustainability of farming systems. A 45-month period of mixed grass (purple pigeon grass, Setaria incrassata Stapf; Rhodes grass, Chloris gayana Kunth.) and legume (lucerne, Medicago sativa L.; annual medics, M. scutellata L. Mill. and M. truncatula Gaertn.) pasture was one of several options that were compared at a fertility-depleted Vertosol at Warra, southern Queensland, to improve grain yields or increase grain protein concentration of subsequent wheat crops. Objectives of the study were to measure the productivity of a mixed grass and legume pasture grown over 45 months (cut and removed over 36 months) and its effects on yield and protein concentrations of the following wheat crops. Pasture production (DM t/ha) and aboveground plant N yield (kg/ha) for grass, legume (including a small amount of weeds) and total components of pasture responded linearly to total rainfall over the duration of each of 3 pastures sown in 1986, 1987 and 1988. Averaged over the 3 pastures, each 100 mm of rainfall resulted in 0.52 t/ha of grass, 0.44 t/ha of legume and 0.97 t/ha of total pasture DM, there being little variation between the 3 pastures. Aboveground plant N yield of the 3 pastures ranged from 17.2 to 20.5 kg/ha per 100 mm rainfall. Aboveground legume N in response to total rainfall was similar (10.6 - 13.2 kg/ha. 100 mm rainfall) across the 3 pastures in spite of very different populations of legumes and grasses at establishment. Aboveground grass N yield was 5.2 - 7.0 kg/ha per 100mm rainfall. In most wheat crops following pasture, wheat yields were similar to that of unfertilised wheat except in 1990 and 1994, when grain yields were significantly higher but similar to that for continuous wheat fertilised with 75 kg N/ha. In contrast, grain protein concentrations of most wheat crops following pasture responded positively, being substantially higher than unfertilised wheat but similar to that of wheat fertilised with 75 kg N/ha. Grain protein averaged over all years of assay was increased by 25 - 40% compared with that of unfertilised wheat. Stored water supplies after pasture were < 134mm (< 55% of plant available water capacity); for most assay crops water storages were 67 - 110 mm, an equivalent wet soil depth of only 0.3 - 0.45 m. Thus, the crop assays of pasture benefits were limited by low water supply to wheat crops. Moreover, the severity of common root rot in wheat crop was not reduced by pasture - wheat rotation.

Vermiculite improves early development and survival of low chill stone-fruit embryos rescued in vitro

There are many reports of efficient embryo germination and the method has been optimized to suit subtropical low chill genotypes. However the subsequent growth, vigor, and ability of germinated embryos to develop and survive acclimatization is rarely reported. Many germinated embryos do not survive acclimatization, develop slowly, or fail to develop normally. Methods to improve plant development from in vitro embryo cultures are needed to improve the number of plants that survive to be useful in breeding programs. This paper describes an improved method of embryo rescue that significantly increases embryo shoot and root development that leads to increased plant survival. Four treatments: Woody Plant Media (WPM) solidified with agar, vermiculite with liquid WPM, vermiculite with WPM plus agar, and conventional stratification, were evaluated for embryo growth and subsequent plantlet development and survival for two low-chill peach and one low-chill nectarine cultivar. Highly significant improvements were found for shoot and root development of seedlings germinated in vermiculite based media compared to embryos germinated in conventional agar-based media. Vermiculite with WPM and agar improved plantlet growth subsequent to in vitro culture and significantly increased survival of germinated embryos resulting in more plants reaching the field.

High-resolution melt-curve analysis of random-amplified-polymorphic-DNA markers, for the characterisation of pathogenic Leptospira.

A new test for pathogenic Leptospira isolates, based on RAPD-PCR and high-resolution melt (HRM) analysis (which measures the melting temperature of amplicons in real time, using a fluorescent DNA-binding dye), has recently been developed. A characteristic profile of the amplicons can be used to define serovars or detect genotypes. Ten serovars, of leptospires from the species Leptospira interrogans (serovars Australis, Robinsoni, Hardjo, Pomona, Zanoni, Copenhageni and Szwajizak), L. borgpetersenii (serovar Arborea), L. kirschneri (serovar Cynopteri) and L. weilii (serovar Celledoni), were typed against 13 previously published RAPD primers, using a real-time cycler (the Corbett Life Science RotorGene 6000) and the optimised reagents from a commercial kit (Quantace SensiMix). RAPD-HRM at specific temperatures generated defining amplicon melt profiles for each of the tested serovars. These profiles were evaluated as difference-curve graphs generated using the RotorGene software package, with a cut-off of at least 8 'U' (plus or minus). The results demonstrated that RAPD-HRM can be used to measure serovar diversity and establish identity, with a high degree of stability. The characterisation of Leptospira serotypes using a DNA-based methodology is now possible. As an objective and relatively inexpensive and rapid method of serovar identification, at least for cultured isolates, RAPD-HRM assays show convincing potentia.

Campylobacter jejuni and Campylobacter coli Genotyping by High-Resolution Melting Analysis of a flaA Fragment.

The highly variable flagellin-encoding flaA gene has long been used for genotyping Campylobacter jejuni and Campylobacter coli. High-resolution melting (HRM) analysis is emerging as an efficient and robust method for discriminating DNA sequence variants. The objective of this study was to apply HRM analysis to flaA-based genotyping. The initial aim was to identify a suitable flaA fragment. It was found that the PCR primers commonly used to amplify the flaA short variable repeat (SVR) yielded a mixed PCR product unsuitable for HRM analysis. However, a PCR primer set composed of the upstream primer used to amplify the fragment used for flaA restriction fragment length polymorphism (RFLP) analysis and the downstream primer used for flaA SVR amplification generated a very pure PCR product, and this primer set was used for the remainder of the study. Eighty-seven C. jejuni and 15 C. coli isolates were analyzed by flaA HRM and also partial flaA sequencing. There were 47 flaA sequence variants, and all were resolved by HRM analysis. The isolates used had previously also been genotyped using single-nucleotide polymorphisms (SNPs), binary markers, CRISPR HRM, and flaA RFLP.flaA HRM analysis provided resolving power multiplicative to the SNPs, binary markers, and CRISPR HRM and largely concordant with the flaA RFLP. It was concluded that HRM analysis is a promising approach to genotyping based on highly variable genes.

Enhancing somatic embryogenesis in avocado (Persea americana Mill.) using a two-step culture system and including glutamine in the culture medium

The development of a more efficient in vitro regeneration system for somatic embryos (SEs) of avocado (Persea americana) would facilitate the development of new superior cultivars for this valuable horticultural crop. In this study, we report a new and efficient method for maintenance and regeneration of avocado SEs. Avocado SEs of four cultivars remained healthy and viable in vitro for 11 months on a medium used for mango somatic embryogenesis, compared with 3-4 months on Murashige and Skoog medium. Various supplements and media modifications were investigated to improve the low conversion rate of regenerated plants from avocado SEs reported previously. The one-step system for regeneration of white-opaque somatic embryos (WOSEs) used solid medium only over a period of 12-14 weeks (sub-culturing every 6 weeks). Addition of praline and glutamine improved the total regeneration from 0 to 17.5% and 10.5%, and plant/shoot recovery from 0 to 12.5% and 5%, respectively. A two-step culture system involving the transfer of WOSEs of cultivar 'Reed' after 6 weeks on solid to liquid medium for 12-15 days as an intermediate step, followed by subculturing again onto solid medium for 6 weeks improved total regeneration to 29% and plant/shoot recovery to 18.3 from 0% when regenerated by subculturing on solid medium only. Supplementation with proline in the solid as well as liquid medium in the two-step culture system at 0.4 g/L increased total regeneration to 35% and plant/shoot recovery to 20%. We were able to achieve highest regeneration using glutamine at 1 g/L in the two-step culture system in terms of both total regeneration (58.3%, including 43.3% bipolar regeneration) and plant/shoot recovery (36.7%) rates, which were significantly higher than in any other treatment investigated. (C) 2013 Elsevier B.V. All rights reserved.

Welfare outcomes for 3- and 6-month-old beef calves in a tropical environment castrated surgically or by applying rubber rings

Castration of cattle using rubber rings is becoming increasingly popular due to the perceived ease of the procedure and greater operator safety when compared with surgical castration. Few comparative studies have investigated the effects of different castration methods and calf age on welfare outcomes, particularly in a tropical environment. Thirty Belmont Red (a tropically adapted breed), 3-month-old (liveweight 71–119 kg) and 30, 6-month-old (liveweight 141–189 kg) calves were assigned to a two age × three castration (surgical, ring and sham) treatment factorial study (Surg3, Surg6, Ring3, Ring6, Sham3 and Sham6, n = 10 for each treatment group). Welfare outcomes were assessed post-castration using: behaviour for 2 weeks; blood parameters (cortisol and haptoglobin concentrations) to 4 weeks; wound healing to 5 weeks; and liveweights to 6 weeks. More Surg calves struggled during castration compared with Sham and Ring (P < 0.05, 90 ± 7% vs. 20 ± 9% and 24 ± 10%) and performed more struggles (1.9 ± 0.2, 1.1 ± 0.3 and 1.1 ± 0.3 for Surg, Sham and Ring, respectively), suggesting that surgical castration caused most pain during performance of the procedure. A significant (P < 0.05) time × castration method × age interaction for plasma cortisol revealed that concentrations decreased most rapidly in Sham; the Ring6 calves failed to show reduced cortisol concentrations at 2 h post-castration, unlike other treatment groups. By 7 h post-castration, all treatment groups had similar concentrations. A significant (P < 0.01) interaction between time and castration method showed that haptoglobin concentrations increased slightly to 0.89 and 0.84 mg/mL for Surg and Ring, respectively over the first 3 days post-castration. Concentrations for Surg then decreased to levels similar to Sham by day 21 and, although concentrations for Ring decreased on day 7 to 0.76 mg/mL, they increased significantly on day 14 to 0.97 mg/mL before reducing to concentrations similar to the other groups (0.66 mg/mL) by day 21. Significantly (P < 0.05) more of the wounds of the 3-month compared with the 6-month calves scored as ‘healed’ at day 7 (74% vs. 39%), while more (P = 0.062) of the Surg than Ring scored as ‘healed’ at day 21 (60% vs. 29%). At day 14 there were significantly (P < 0.05) fewer healed wounds in Ring6 compared with other treatment groups (13% vs. 40–60%). Liveweight gain was significantly (P < 0.05) greater in 3-month (0.53 kg/day) than in 6-month calves (0.44 kg/day) and in Sham calves (P < 0.001, 0.54 kg/day), than in Ring (0.44 kg/day) and Surg (0.48 kg/day) calves. Overall, welfare outcomes were slightly better for Surg than Ring calves due to reduced inflammation and faster wound healing, with little difference between age groups.

Welfare outcomes for 3- and 6-month-old beef calves in a tropical environment castrated surgically or by applying rubber rings

Castration of cattle using rubber rings is becoming increasingly popular due to the perceived ease of the procedure and greater operator safety when compared with surgical castration. Few comparative studies have investigated the effects of different castration methods and calf age on welfare outcomes, particularly in a tropical environment. Thirty Belmont Red (a tropically adapted breed), 3-month-old (liveweight 71–119 kg) and 30, 6-month-old (liveweight 141–189 kg) calves were assigned to a two age × three castration (surgical, ring and sham) treatment factorial study (Surg3, Surg6, Ring3, Ring6, Sham3 and Sham6, n = 10 for each treatment group). Welfare outcomes were assessed post-castration using: behaviour for 2 weeks; blood parameters (cortisol and haptoglobin concentrations) to 4 weeks; wound healing to 5 weeks; and liveweights to 6 weeks. More Surg calves struggled during castration compared with Sham and Ring (P < 0.05, 90 ± 7% vs. 20 ± 9% and 24 ± 10%) and performed more struggles (1.9 ± 0.2, 1.1 ± 0.3 and 1.1 ± 0.3 for Surg, Sham and Ring, respectively), suggesting that surgical castration caused most pain during performance of the procedure. A significant (P < 0.05) time × castration method × age interaction for plasma cortisol revealed that concentrations decreased most rapidly in Sham; the Ring6 calves failed to show reduced cortisol concentrations at 2 h post-castration, unlike other treatment groups. By 7 h post-castration, all treatment groups had similar concentrations. A significant (P < 0.01) interaction between time and castration method showed that haptoglobin concentrations increased slightly to 0.89 and 0.84 mg/mL for Surg and Ring, respectively over the first 3 days post-castration. Concentrations for Surg then decreased to levels similar to Sham by day 21 and, although concentrations for Ring decreased on day 7 to 0.76 mg/mL, they increased significantly on day 14 to 0.97 mg/mL before reducing to concentrations similar to the other groups (0.66 mg/mL) by day 21. Significantly (P < 0.05) more of the wounds of the 3-month compared with the 6-month calves scored as ‘healed’ at day 7 (74% vs. 39%), while more (P = 0.062) of the Surg than Ring scored as ‘healed’ at day 21 (60% vs. 29%). At day 14 there were significantly (P < 0.05) fewer healed wounds in Ring6 compared with other treatment groups (13% vs. 40–60%). Liveweight gain was significantly (P < 0.05) greater in 3-month (0.53 kg/day) than in 6-month calves (0.44 kg/day) and in Sham calves (P < 0.001, 0.54 kg/day), than in Ring (0.44 kg/day) and Surg (0.48 kg/day) calves. Overall, welfare outcomes were slightly better for Surg than Ring calves due to reduced inflammation and faster wound healing, with little difference between age groups.