Quantitative assessment of total phenol contents of European oak (Quercus petraea and Quercus robur) by diffuse reflectance NIR spectroscopy on solid wood surfaces

Near infrared spectroscopy (NIRS) combined with multivariate analysis techniques was applied to assess phenol content of European oak. NIRS data were firstly collected directly from solid heartwood surfaces: in doing so, the spectra were recorded separately from the longitudinal radial and the transverse section surfaces by diffuse reflectance. The spectral data were then pretreated by several pre-processing procedures, such as multiplicative scatter correction, first derivative, second derivative and standard normal variate. The tannin contents of sawmill collected from the longitudinal radial and transverse section surfaces were determined by quantitative extraction with water/methanol (1:4, by vol). Then, total phenol contents in tannin extracts were measured by the Folin-Ciocalteu method. The NIR data were correlated against the Folin-Ciocalteu results. Calibration models built with partial least squares regression displayed strong correlation - as expressed by high determination correlation coefficient (r2) and high ratio of performance to deviation (RPD) - between measured and predicted total phenols content, and weak calibration and prediction errors (RMSEC, RMSEP). The best calibration was provided with second derivative spectra (r2 value of 0.93 for the longitudinal radial plane and of 0.91 for the transverse section plane). This study illustrates that the NIRS technique when used in conjunction with multivariate analysis could provide reliable, quick and non-destructive assessment of European oak heartwood extractives.

Bentonite can decrease ammonia volatilisation losses from poultry litter: laboratory studies

Ammonia volatilisation from manure materials within poultry sheds can adversely affect production, and also represents a loss of fertiliser value from the spent litter. This study sought to compare the ability of alum and bentonite to decrease volatilisation losses of ammonia from spent poultry litter. An in-vessel volatilisation trial with air flushing, ammonia collection, and ammonia analysis was conducted over 64 days to evaluate the mitigation potential of these two materials. Water-saturated spent litter was incubated at 25°C in untreated condition (control) or with three treatments: an industry-accepted rate of alum [4% Al2(SO4)3·18H2O by dry mass of litter dry mass; ALUM], air-dry bentonite (127% by dry mass; BENT), or water-saturated bentonite (once again at 127% by dry mass; SATBENT). A high proportion of the nitrogen contained in the untreated spent litter was volatilised (62%). Bentonite additions were superior to alum additions at retaining spent litter ammonia (nitrogen losses: 15%, SATBENT; 34%, BENT; 54%, ALUM). Where production considerations favour comparable high rates of bentonite addition (e.g. where the litter is to be re-formulated as a fertiliser), this clay has potential to decrease ammonia volatilisation either in-shed or in spent litter stockpiles or formulated products, without the associated detrimental effect of alum on phosphorus availability.

Innovating a consumer awareness of sweetpotato: industry, research and consumer adoption issues

In Australia, sweetpotato production has grown remarkably (1700%) in the last 16 years. Growers currently market 75 000 t per annum, worth $80-90 million at farm gate. The orange-fleshed cultivars are the most familiar to consumers, but other cultivars with varying flesh colour and properties also have potential for the consumer market. Given that Australian sweetpotato growers desire alternative cultivars to promote market demand, it is important to articulate the characteristics of sweetpotatoes that are most and least desirable for consumers. Research indicates that consumer acceptability of the new cultivar 'Evangeline' may assist sweetpotato growers and marketers in understanding the impact of both sensory properties, such as colour and the importance of flavour and texture of sweetpotatoes, and an awareness of the potential health benefits of sweetpotato consumption. In addition, whilst consumer preferences (regarding size, colour, texture, skin tone) and nutritional knowledge of sweet potato (regarding glycaemic index) is increasing, there is limited research investigating consumers understanding of health messages of sweetpotato attributes. This industry and consumer research review highlights the potential for promoting innovative strategies to improve adoption of new cultivars in the marketplace.

New sweetpotato cultivars to meet market needs

The Australian Sweetpotato Growers Association partnered researchers from Agri-Science Queensland (with co-funding from Horticulture Australia Limited) to identify new, high performing sweetpotato cultivars with diverse colours and tastes. The project evaluated a mix of purple, red, orange and white skin and flesh, tailored for Australian growers and consumers. Australia's sweetpotato market currently relies on one gold cultivar for 90% of national production. Major retailers were requesting a reliable supply of quality sweetpotatoes in emerging categories such as red or white skin or purple flesh. To identify suitable cultivars, over 40 new sweetpotato cultivars were virus tested, and extensively evaluated in multiple experiments in Queensland and northern New South Wales. Larger-scale plantings by growers, using standard agronomy, provided additional performance feedback under commercial conditions. In partnership with growers and wholesalers, cultivars were evaluated in field and laboratory for desired characteristics such as shape, size range, skin and flesh colour, estimates of productivity and suitability for commercial production, cooking characteristics and taste. New high performing gold cultivars had better soil insect and nematode tolerance than the current cultivars. The new colours offered diverse health-related opportunities for consumers, more anthocyanins in purple-fleshed cultivars; higher beta carotene content in new gold fleshed cultivars; and potentially lower GI in white-fleshed cultivars. To enhance adoption, the industry/research partnership will tailor agronomic guidelines to maximise on-farm performance and identify niche marketing pathways for each of the cultivars. Increased consumption of this versatile vegetable will drive sweetpotato industry development and expansion into the future.

Optimising plant bed performance through adaptive research with the Australian sweetpotato industry

A key driver of Australian sweetpotato productivity improvements and consumer demand has been industry adoption of disease-free planting material systems. On a farm isolated from main Australian sweetpotato areas, virus-free germplasm is annually multiplied, with subsequent 'pathogen-tested' (PT) sweetpotato roots shipped to commercial Australian sweetpotato growers. They in turn plant their PT roots into specially designated plant beds, commencing in late winter. From these beds, they cut sprouts as the basis for their commercial fields. Along with other intense agronomic practices, this system enables Australian producers to achieve worldRSQUOs highest commercial yields (per hectare) of premium sweetpotatoes. Their industry organisation, ASPG (Australian Sweetpotato Growers Inc.), has identified productivity of mother plant beds as a key driver of crop performance. Growers and scientists are currently collaborating to investigate issues such as catastrophic plant beds losses; optimisation of irrigation and nutrient addition; rapidity and uniformity of initial plant bed harvests; optimal plant bed harvest techniques; virus re-infection of plant beds; and practical longevity of plant beds. A survey of 50 sweetpotato growers in Queensland and New South Wales identified a substantial diversity in current plant bed systems, apparently influenced by growing district, scale of operation, time of planting, and machinery/labour availability. Growers identified key areas for plant bed research as: optimising the size and grading specifications of PT roots supplied for the plant beds; change in sprout density, vigour and performance through sequential cuttings of the plant bed; optimal height above ground level to cut sprouts to maximise commercial crop and plant bed performance; and use of structures and soil amendments in plant bed systems. Our ongoing multi-disciplinary research program integrates detailed agronomic experiments, grower adaptive learning sites, product quality and consumer research, to enhance industry capacity for inspired innovation and commercial, sustainable practice change.

Ambient stored garlic is higher yielding than garlic stored at cooler temperatures

This experiment evaluated the effect of storage temperature on garlic emergence and yield. Six treatments, '5°C + heat', '5°C - heat', '15°C + heat', '15°C - heat', 'ambient + heat' and 'ambient - heat' were imposed. The heat treatment included a stepped heat treatment of between 30 and 38°C over a 42 day period. Highest emergence rate and yield was obtained for treatments stored under ambient conditions. Garlic stored at cool temperatures of either 5 or 15°C had poorer emergence and lower yields that were commercially unviable. Heat treatment had no observable effect on emergence or yield in ambient or 15°C treatments but in 5°C treatments, yield was significantly greater when the heat treatment was applied but nonetheless was still commercially unviable. The recommendations from this experiment are that in subtropical climates garlic seed-bulbs should be stored under ambient conditions. © ISHS.

Optimization of aeroponic technology for future integration in quality potato seed production systems in tropical environments

Virus and soil borne pathogens negatively impact on the production of potatoes in tropical highland and sub-tropical environments, limiting supply of an increasingly popular and important vegetable in these regions. It is common for latent disease infected seed tubers or field grown cuttings to be used as potato planting material. We utilised an International Potato Centre technique, using aeroponic technology, to produce low cost mini-tubers in tropical areas. The system has been optimised for increased effectiveness in tropical areas. High numbers of seed tubers of cultivar Sebago (630) and Nicola per m2 (>900) were obtained in the first generation, and the system is capable of producing five crops of standard cultivars in every two years. Initial results indicate that quality seed could be produced by nurseries and farmers, therefore contributing to the minimisation of soil borne diseases in an integrated management plan. This technology reduces seed production costs, benefiting seed and potato growers. © ISHS.

Influence of mucuna fallow crop on selected soil properties, weed suppression and taro yields in Taveuni, Fiji

Two field experiments were carried out in Taveuni, Fiji to study the effects of mucuna (Mucuna pruriens) and grass fallow systems at 6 and 12 month durations on changes in soil properties (Experiment 1) and taro yields (Experiment 2). Biomass accumulation of mucuna fallow crop was significantly higher (P<0.05) than grass fallow crop at both 6 and 12 month durations. The longer fallow duration resulted in higher (P<0.05) total soil organic carbon, total soil nitrogen and earthworm numbers regardless of fallow type. Weed suppression in taro grown under mucuna was significantly greater (P<0.05) than under natural grass fallow. Taro grown under mucuna fallow significantly outyielded taro grown under grass fallow (11.8 vs. 8.8 t ha-1). Also, the gross margin of taro grown under mucuna fallow was 52% higher than that of taro grown under grass fallow. © ISHS.