Benchmarking water management in the Australian cotton industry

Benchmarking irrigation performance has always been a challenge. As part of the Rural Water Use Efficiency (RWUE3) project the team in, collaboration with the Cotton Catchments Communities CRC, National Certificate of Educational Achievement and the Knowledge Management Phase 2 project, aimed to standardise the irrigation indices in use within the cotton industry. This was achieved through: - the delivery of training workshops - access to benchmarking tools - promotion of benchmarking as a best practice to be adopted on farm.

Termite resistance of DMDHEU-treated wood.

Four field trials were conducted with wood modified with dimethyloldihydroxy-ethyleneurea (DMDHEU) in contact with subterranean termites. Trials 1 to 3 were conducted with Coptotermes acinaciformis (Froggatt); 1 and 2 in south-east Queensland, and 3 in northern Queensland, Australia. Trial 4 was conducted in northern Queensland with Mastotermes darwiniensis (Froggatt). Four timber species (Scots pine, beech, Slash pine and Spotted gum) and two levels (1.3 M and 2.3 M) of DMDHEU were used. The tests were validated. DMDHEU successfully prevented damage by C. acinaciformis in south-east Queensland, but not in northern Queensland. It also did not protect the wood against M. darwiniensis. Except for beech in trial 4, DMDHEU led to reduced mass losses caused by termite attack compared to the unmodified feeder stakes. Slash pine (in trials 1 and 3) and Spotted gum (in trial 1) presented low mass losses. Modification of Scots pine was more effective against termite damage than the modification of beech.

The Potential for a New Value Adding Industry for Noni Tropical Fruit Producers

Morinda citrifolia (noni) grows widely throughout the Pacific and is native to Australia. It is a source of traditional medicine amongst Coastal Aboriginal Communities in Cape York, the Pacific Islands and South East Asia, and in recent years has experienced significant economic growth worldwide through a variety of health and cosmetic claims. The largest markets for noni are North America, Europe, Japan, Mexico, Asia and Australia with the worldwide market for these products estimated at US$400 million.

Implementing sustainable farming practices in the Herbert: The Oakleigh Farming Company experience

The Oakleigh Farming Company has been progressively changing its farming practices on its property at Cordelia in the Herbert River District. During the last ten years the changes have included the adoption of raised beds at 1.8m row spacing, controlled traffic and dual row planting using double disc opener planters. This paper describes some of the changes that have been made to the farming system and examines their impact on farm productivity and economic performance. Since changing to the current farming system, the farm gross margin has increased from $789/ha to $897/ha. In addition to the numerous cost savings, the new farming system has reduced the time spent on tractors by 54% across the whole farm. Return on investment on the 1997 farming system was 1.6% versus 2.7% on their current farming system. The farming company is continually looking for new ways to improve profitability and believes that innovation is critical for the long term sustainability of the sugar industry.

Evaluation of wood characteristics of tropical post-mid rotation plantation Eucalyptus cloeziana and E. pellita: Part (a) Natural durability of timber.

This project evaluated the timber quality, processing and performance characteristics of 19-year-old Eucalyptus cloeziana (Gympie messmate) and 15-year-old Eucalyptus pellita (red mahogany). Studies were undertaken to evaluate wood and mechanical properties, accelerated seasoning and veneer and plywood production. Above-ground and in-ground durability field tests were established at three locations in Queensland. Ground proixmity tests and L-joint tests were installed to gather data applicable to above-ground, weather-exposed end-use applications, and stake tests were installed to gather data applicable to in-ground, weather-exposed end-use applications.

Evaluation of wood characteristics of tropical post-mid rotation plantation Eucalyptus cloeziana and E. pellita: Part (c) Wood quality and structural properties.

This study provides information about wood quality, structural properties, processing characterists and product suitability of wood harvested from fast-grown hardwood plantations. Wood quality attributes tested included density, extractive content, unit shrinkage, heartwood proportion and sapwood width. Structural properties tested included small clear and full section strength and stiffness, hardness, joint group, visual grade assessment and natural vibration-based grade assessment. The variation between the inner, intermediate and outer heartwood zones and the variation between provenances was also tested. Overall, the wood qualtiy attributes measured for 19 year-old E. cloeziana and 15 year-old E. pellita plantation material fall between those expected from the wood of mature, native forest trees and those found in younger plantation material of the same species.

Evaluation of wood characteristics of tropical post-mid rotation plantation Eucalyptus cloeziana and E. pellita: Part (d) Veneer and plywood potential.

Logs from two hardwood plantations in north Queensland were peeled to assess the veneer and plywood potential of fast-grown tropical plantation eucalypts. After visual grading and veneer recovery calculatios, selected veneers were assembled to produce plywood panels. These were tested for mechanical properties and glue bond strength to determine the suitability of young, fast-grown, tropical eucalytps for panel product applications.

Improvement of hardwood drying schedules.

Drying regrowth native hardwoods to satisfactory moisture levels is a significant challenge for the processing industry. Dried quality is becoming increasingly important as sawn hardwood continues to move away from structural markets into appearance applications, but more difficult to achieve as the resource mix being processed becomes younger. An accurate, predictive drying model is a powerful tool in schedule development, decreasing the reliance on expensive, repetitive drying trials. This project updates the KilnSched drying model to allow the drying behaviour of regrowth blackbutt, jarrah, messmate, spotted gum and Victorian ash to be modeled more accurately. The effect of high temperature drying and humidity treatments on spotted gum were also investigated, as was the economics of various drying methods on spotted gum and blackbutt.

Effect of reduced rotation length on Araucaria wood quality.

The review of existing information has identified the following: - the juvenile core in Araucaria is probably contained within the first 15 growth rings in the pith, with spiral grain being a chief determinant of its extent within the stem; - a reduction in rotation length for a given site index will reduce ASV and mature wood volume, with an increase in the proportion of juvenile wood; - for a given rotation length, lower ASV stems were estimated to contain a lower proportion of juvenile wood (based on the assumptions made and crude simulations using WEEDS, PL YSIM and STEPS software); regardless of juvenile wood proportions, smaller stems will yield a higher proportion of pith-in material; - an increase in the proportion of juvenile wood, due to a reduction in rotation length, could affect wood quality due to an increase in the proportion of the recovery containing high spiral grain, shorter tracheids and higher micellar angle; - high spiral grain and high micellar angles adversely impact on wood quality through their influence on twist and longitudinal shrinkage, respectively; - positive outcomes from a reduction in rotation length might include an increase in the proportion of live knots in upper stem sections and a reduction in the extent of brown-stain heartwood; - the uniformity in basic density within Araucaria stems means reduced rotation lengths and lower stem ASVs are unlikely to have a major impact on this wood property, and - the effect of a reduction in rotation length on the incidence of compression wood and timber susceptible to kiln staining could not be established from the available information.

Resource characterisation of slash pine plantation wood quality.

This review highlights the considerable variation found in wood properties impacting timber stiffness and stability such as wood density, spiral grain and microfibril angle. Variation with age, site quality and environment, as well as amongst species, hybrids and genetic stock is reported and opportunities for product-focused wood quality improvement are identified.

Economic evaluation of precision controlled traffic farming in the Australian sugar industry: a case study of an early adopter

Controlled traffic has been identified as the most practical method of reducing compaction-related soil structural degradation in the Australian sugarcane industry. GPS auto-steer systems are required to maximize this potential. Unfortunately there is a perception that little economic gain will result from investing in this technology. Regardless, a number of growers have made the investment and are reaping substantial economic and lifestyle rewards. In this paper we assess the cost effectiveness of installing GPS guidance and using it to implement Precision Controlled Traffic Farming (PCTF) based on the experience of an early adopter. The Farm Economic Analysis Tool (FEAT) model was used with data provided by the grower to demonstrate the benefits of implementing PCTF. The results clearly show that a farming system based on PCTF and the minimum tillage improved farm gross margin by 11.8% and reduced fuel usage by 58%, compared to producers' traditional practice. PCTF and minimum tillage provide sugar producers with a tool to manage the price cost squeeze at a time of low sugar prices. These data provide producers with the evidence that investment in PCTF is economically prudent.

The wood properties of subtropical and tropical hardwood plantation timber grown for high-value products in Australia

Wood quality and properties of plantation grown trees differ from those from mature, natural grown trees and this has implications for processing, manufacturing and product performance. The wood properties of genetically improved and syliculturally managed plantation trees are affected by their faster growth rates younger harvest age. This report summarises the key wood properties of species that are the primary candidates for plantation forestry in the subtropical to tropical region of eastern Australia. The planned end uses for these trees vary from short-rotation pulp to high-value products such as poles, sawn timber for appearance products and engineered wood products including structural plywood and laminated veneer lumber (LVL).

The Queensland forest industry

An overview of the commercial growing, management and processing of forest products in Queensland.

African mahogany (Khaya senegalensis) plantations in Australia - status, needs and progress

The Australian African mahogany estate comprises over 12,000 ha of industrial plantations, farm-forestry plots and trials, virtually all derived from Africa-sourced wild seed. However, the better trees have given high-value products such as veneers, high-grade boards and award-winning furniture. Collaborative conservation and improvement by the Northern Territory (NT) and Queensland governments since 2000 realised seed orchards, hedge gardens and genetic tests revealing promising clones and families. Private sector R&D since the mid 2000s includes silvicultural-management and wood studies, participatory testing of government material and establishing over 90 African provenances and many single-tree seedlots in multisite provenance and family trials. Recent, mainly public sector research included a 5-agency project of 2009-12 resulting in advanced propagation technologies and greater knowledge of biology, wood properties and processing. Operational priority in the short term should focus on developing seed production areas and ‘rolling front’ clonal seed orchards. R&D priorities should include: developing and implementing a collaborative improvement strategy based on pooled resources; developing non-destructive evaluation of select-tree wood properties, micropropagation (including field testing of material from this source) to ‘industry ready’ and a select-tree index; optimising seed production in orchards; advancing controlled pollination techniques; and maximising benefits from the progeny, clone and provenance trials. Australia leads the world in improvement and ex situ conservation of African mahogany based on the governments’ 13-year program and more recent industry inputs such that accumulated genetic resources total over 120 provenances and many families from 15 of the 19 African countries of its range. Having built valuable genetic resources, expertise, technologies and knowledge, the species is almost ‘industry ready’. The industry will benefit if it exploits the comparative advantage these assets provide. However the status of much of the diverse germplasm introduced since the mid 2000s is uncertain due to changes in ownership. Further, recent reductions of government investment in forestry R&D will be detrimental unless the industry fills the funding gaps. Expansion and sustainability of the embryonic industry must capitalise on past and current R&D, while initiating and sustaining critical new work through all-stakeholder collaboration.

Relocation of Intensive Agriculture to Northern Australia: The Case of the Rice Industry

Development of new agricultural industries in northern Australia is seen as a way to provide food security in the face of reduced water availability in existing regions in the south. This report aims to identify some of the possible economic consequences of developing a rice industry in the Burdekin region, while there is a reduction of output in the Riverina. Annual rice production in the Riverina peaked at 1.7 M tonnes, but the long-term outlook, given climate change impacts on that region and government water buy-backs, is more likely to be less than 800,000 tonnes. Growers are highly efficient water users by international standards, but the ability to offset an anticipated reduction in water availability through further efficiency gains is limited. In recent years growers in the Riverina have diversified their farms to a greater extent and secondary production systems include beef, sheep and wheat. Production in north Queensland is in its infancy, but a potentially suitable farming system has been developed by including rice within the sugarcane system without competition and in fact contributing to the production of sugar by increasing yields and controlling weeds. The economic outcomes are estimated a large scale, dynamic, computable general equilibrium (CGE) model of the world economy (Tasman Global), scaled down to regional level. CGE models mimic the workings of the economy through a system of interdependent behavioural and accounting equations which are linked to an input-output database. When an economic shock or change is applied to a model, each of the markets adjusts according to the set of behavioural parameters which are underpinned by economic theory. In this study the model is driven by reducing production in the Riverina in accordance with relationships found between water availability and the production of rice and replacement by other crops and by increasing ride production in the Burdekin. Three scenarios were considered: • Scenario 1: Rice is grown using the fallow period between the last ratoon crop of sugarcane and the new planting. In this scenario there is no competition between rice and sugarcane • Scenario 2: Rice displaces sugarcane production • Scenario 3: Rice is grown on additional land and does not compete with sugarcane. Two time periods were used, 2030 and 2070, which are the conventional time points to consider climate change impacts. Under scenario 1, real economic output declines in the Riverina by $45 million in 2030 and by $139 million in 2070. This is only partially offset by the increased real economic output in the Burdekin of $35 million and $131 million respectively.