Genetic control of nodal root angle in sorghum and its implications on water extraction

Genotypic variability in root system architecture has been associated with root angle of seedlings and water extraction patterns of mature plants in a range of crops. The potential inclusion of root angle as a selection criterion in a sorghum breeding program requires (1) availability of an efficient screening method, (2) presence of genotypic variation with high heritability, and (3) an association with water extraction pattern. The aim of this study was to determine the feasibility for inclusion of nodal root angle as a selection criterion in sorghum breeding programs. A high-throughput phenotypic screen for nodal root angle in young sorghum plants has recently been developed and has been used successfully to identify significant variation in nodal root angle across a diverse range of inbred lines and a mapping population. In both cases, heritabilities for nodal root angle were high. No association between nodal root angle and plant size was detected. This implies that parental inbred lines could potentially be used to asses nodal root angle of their hybrids, although such predictability is compromised by significant interactions. To study effects of nodal root angle on water extraction patterns of mature plants, four inbred lines with contrasting nodal root angle at seedling stage were grown until at least anthesis in large rhizotrons. A consistent trend was observed that nodal root angle may affect the spatial distribution of root mass of mature plants and hence their ability to extract soil water, although genotypic differences were not significant. The potential implications of this for specific adaptation to drought stress are discussed. Results suggest that nodal root angle of young plants can be a useful selection criterion for specific drought adaptation, and could potentially be used in molecular breeding programs if QTLs for root angle can be identified. (C) 2012 Elsevier B.V. All rights reserved.

Mango fruit peel and flesh extracts affect adipogenesis in 3T3-L1 cells

Obesity is associated with many chronic disease states, such as diabetes mellitus, coronary disease and certain cancers, including those of the breast and colon. There is a growing body of evidence that links phytochemicals with the inhibition of adipogenesis and protection against obesity. Mangoes (Mangifera indica L.) are tropical fruits that are rich in a diverse array of bioactive phytochemicals. In this study, methanol extracts of peel and flesh from three archetypal mango cultivars; Irwin, Nam Doc Mai and Kensington Pride, were assessed for their effects on a 3T3-L1 pre-adipocyte cell line model of adipogenesis. High content imaging was used to assess: lipid droplets per cell, lipid droplet area per cell, lipid droplet integrated intensity, nuclei count and nuclear area per cell. Mango flesh extracts from the three cultivars did not inhibit adipogenesis; peel extracts from both Irwin and Nam Doc Mai, however, did so with the Nam Doc Mai extract most potent at inhibiting adipogenesis. Peel extract from Kensington Pride promoted adipogenesis. The inhibition of adipogenesis by Irwin (100 mu g mL(-1)) and Nam Doc Mai peel extracts (50 and 100 mu g mL(-1)) was associated with an increase in the average nuclear area per cell; similar effects were seen with resveratrol, suggesting that these extracts may act through pathways similar to resveratrol. These results suggest that differences in the phytochemical composition between mango cultivars may influence their effectiveness in inhibiting adipogenesis, and points to mango fruit peel as a potential source of nutraceuticals.

Soil phosphorus–crop response calibration relationships and criteria for winter cereal crops grown in Australia

Soil testing is the most widely used tool to predict the need for fertiliser phosphorus (P) application to crops. This study examined factors affecting critical soil P concentrations and confidence intervals for wheat and barley grown in Australian soils by interrogating validated data from 1777 wheat and 150 barley field treatment series now held in the BFDC National Database. To narrow confidence intervals associated with estimated critical P concentrations, filters for yield, crop stress, or low pH were applied. Once treatment series with low yield (<1 t/ha), severe crop stress, or pHCaCl2 <4.3 were screened out, critical concentrations were relatively insensitive to wheat yield (>1 t/ha). There was a clear increase in critical P concentration from early trials when full tillage was common compared with those conducted in 1995–2011, which corresponds to a period of rapid shift towards adoption of minimum tillage. For wheat, critical Colwell-P concentrations associated with 90 or 95% of maximum yield varied among Australian Soil Classification (ASC) Orders and Sub-orders: Calcarosol, Chromosol, Kandosol, Sodosol, Tenosol and Vertosol. Soil type, based on ASC Orders and Sub-orders, produced critical Colwell-P concentrations at 90% of maximum relative yield from 15 mg/kg (Grey Vertosol) to 47 mg/kg (Supracalcic Calcarosols), with other soils having values in the range 19–27 mg/kg. Distinctive differences in critical P concentrations were evident among Sub-orders of Calcarosols, Chromosols, Sodosols, Tenosols, and Vertosols, possibly due to differences in soil properties related to P sorption. However, insufficient data were available to develop a relationship between P buffering index (PBI) and critical P concentration. In general, there was no evidence that critical concentrations for barley would be different from those for wheat on the same soils. Significant knowledge gaps to fill to improve the relevance and reliability of soil P testing for winter cereals were: lack of data for oats; the paucity of treatment series reflecting current cropping practices, especially minimum tillage; and inadequate metadata on soil texture, pH, growing season rainfall, gravel content, and PBI. The critical concentrations determined illustrate the importance of recent experimental data and of soil type, but also provide examples of interrogation pathways into the BFDC National Database to extract locally relevant critical P concentrations for guiding P fertiliser decision-making in wheat and barley.

The water relations and irrigation requirements of lychee (litchi chinensis sonn.): a review

The results of research into the water relations and irrigation requirements of lychee are collated and reviewed. The stages of plant development are summarised, with an emphasis on factors influencing the flowering process. This is followed by reviews of plant water relations, water requirements, water productivity and, finally, irrigation systems. The lychee tree is native to the rainforests of southern China and northern Vietnam, and the main centres of production remain close to this area. In contrast, much of the research on the water relations of this crop has been conducted in South Africa, Australia and Israel where the tree is relatively new. Vegetative growth occurs in a series of flushes. Terminal inflorescences are borne on current shoot growth under cool (<15 °C), dry conditions. Trees generally do not produce fruit in the tropics at altitudes below 300 m. Poor and erratic flowering results in low and irregular fruit yields. Drought can enhance flowering in locations with dry winters. Roots can extract water from depths greater than 2 m. Diurnal trends in stomatal conductance closely match those of leaf water status. Both variables mirror changes in the saturation deficit of the air. Very little research on crop water requirements has been reported. Crop responses to irrigation are complex. In areas with low rainfall after harvest, a moderate water deficit before floral initiation can increase flowering and yield. In contrast, fruit set and yield can be reduced by a severe water deficit after flowering, and the risk of fruit splitting increased. Water productivity has not been quantified. Supplementary irrigation in South-east Asia is limited by topography and competition for water from the summer rice crop, but irrigation is practised in Israel, South Africa, Australia and some other places. Research is needed to determine the benefits of irrigation in different growing areas. Copyright © Cambridge University Press 2013.

Bioactive Properties of Mushroom (Agaricus bisporus) Stipe Extracts

The antibacterial activity and total phenolic (TP) content of Agaricus bisporus stipes were assessed using solvent and water extracts to determine its bioactivity. Extraction methods included accelerated solvent extraction (ASE) and hot water followed by membrane concentration. Water extract from ASE had the highest TP of 1.08 gallic acid equivalents (GAE)/g dry weight (DW) followed by ethanol at 0.61 mg GAE/g DW and 0.11 mg GAE/g DW for acetone. Acetone extracts inhibited Escherichia coli and Staphylococcus aureus at less than 50%; ethanol inhibited E. coli at 61.9% and S. aureus at 56.6%; and ASE water inhibited E. coli at 78.6% and S. aureus at 65.4%. The TP content of membrane concentrated extract of mushroom was 17 mg GAE in 100 mL. Membrane concentrated water extracts had a higher percentage inhibition on S. aureus than E. coli. Overall, the results were promising for further application of mushroom stipe extracts as a functional food additive. Practical Applications Mushrooms are known for their health benefits and have been identified as a good source of nutrients. The highly perishable nature of mushrooms warrants further processing and preservation to minimize losses along the supply chain. This study explores the possibility of adding value to mushroom stipes, a by-product of the fresh mushroom industry. The extracts assessed indicate the antibacterial activity and phenolic content, and the potential of using these extracts as functional ingredients in the food industry. This study provides valuable information to the scientific community and to the industries developing novel ingredients to meet the market demand for natural food additives.

Benzyl isothiocyanate: maximising production in papaya tissue extracts

Abstract: Although mainly grown for its sweet flavoured fruit, papaya (Carica papaya) has also been used for pharmacological purposes for many years. The reasons for use are varied with one of the best known being its anti-fungal action. Benzyl isothiocyanate (BITC) is the constituent most often implicated in this activity. Isothiocyanates are formed when the enzyme myrosinase catalyses the hydrolysis of the non-bioactive glucosinolates. This occurs when cellular contents come into contact through chewing, cutting or during extraction processes in the laboratory. While this is common in Brassica vegetables, the glucosinolate-myrosinase system is rare in fruit, papaya being a notable exception. It contains benzyl glucosinolate (BG), the glucosinolate precursor of BITC, in significant quantities. Parameters that determine the amount of BITC formed are duration of hydrolysis, presence/absence of nitrile-specifier proteins and BG content of different cultivars and tissues. We experimented with differing BITC extraction solvents, with the intention of developing a low cost, natural anti-fungal extract based on under-utilised papaya tissues. The findings suggest that papaya seeds, particularly from quarter-ripe fruit, have the potential to produce the highest levels of BITC necessary. Furthermore, they compare well with the nitrile-specifier protein-containing garden cress seeds (Lepidium sativum). To utilise the papaya seeds as a BITC source, an organic solvent such as ethanol is required to extract the largely water-insoluble BITC from the hydrolysed papaya seed mixture.

Bioactive Properties of Mushroom (Agaricus bisporus) Stipe Extracts

The antibacterial activity and total phenolic (TP) content of Agaricus bisporus stipes were assessed using solvent and water extracts to determine its bioactivity. Extraction methods included accelerated solvent extraction (ASE) and hot water followed by membrane concentration. Water extract from ASE had the highest TP of 1.08 gallic acid equivalents (GAE)/g dry weight (DW) followed by ethanol at 0.61 mg GAE/g DW and 0.11 mg GAE/g DW for acetone. Acetone extracts inhibited Escherichia coli and Staphylococcus aureus at less than 50%; ethanol inhibited E. coli at 61.9% and S. aureus at 56.6%; and ASE water inhibited E. coli at 78.6% and S. aureus at 65.4%. The TP content of membrane concentrated extract of mushroom was 17 mg GAE in 100 mL. Membrane concentrated water extracts had a higher percentage inhibition on S. aureus than E. coli. Overall, the results were promising for further application of mushroom stipe extracts as a functional food additive. Practical Applications Mushrooms are known for their health benefits and have been identified as a good source of nutrients. The highly perishable nature of mushrooms warrants further processing and preservation to minimize losses along the supply chain. This study explores the possibility of adding value to mushroom stipes, a by-product of the fresh mushroom industry. The extracts assessed indicate the antibacterial activity and phenolic content, and the potential of using these extracts as functional ingredients in the food industry. This study provides valuable information to the scientific community and to the industries developing novel ingredients to meet the market demand for natural food additives.