Temporal and Spatial Patterns in Recruitment of Three Penaeid Prawns in Moreton Bay, Queensland, Australia

The size at recruitment, temporal and spatial distribution, and abiotic factors influencing abundance of three commercially important species of penaeid prawns in the sublittoral trawl grounds of Moreton Bay (Queensland, Australia) were compared. Metapenaeus bennettae and Penaeus plebejus recruit to the trawl grounds at sizes which are relatively small (14-15 mm carapace length, CL) and below that at which prawns are selected for, and retained, in the fleet's cod-ends. In contrast, Penaeus esculenlus recruit at the relatively large size of 27 mm CL from February to May, well above the size ranges selected for. Recruitment of M. bennettae extends over several months, September-October and February March, and was thus likely to be bi-annual, while the recruitment period of P. plebejus was distinct, peaking in October-November each year. Size classes of M . bennettae were the most spatially stratified of the three species. Catch rates of recruits were negatively correlated with depth for all three species, and were also negatively correlated with salinity for M. bennettae.

Modelling discard ogives from Irish demersal fisheries

Annual discard ogives were estimated using generalized additive models (GAMs) for four demersal fish species: whiting, haddock, megrim, and plaice. The analysis was based on data collected on board commercial vessels and at Irish fishing ports from 1995 to 2003. For all species the most important factors influencing annual discard ogives were fleet (combination of gear, fishing ground, and targeted species), mean length of the catch and year, and, for megrim, also minimum landing size. The length at which fish are discarded has increased since 2000 for haddock, whiting, and plaice. In contrast, discarded length has decreased for megrim, accompanying a reduction in minimum landing size in 2000.

Investigation of movement and factors influencing post-release survival of line-caught coral reef fish using recreational tag-recapture data

Six species of line-caught coral reef fish (Plectropomus spp., Lethrinus miniatus, Lethrinus laticaudis, Lutjanus sebae, Lutjanus malabaricus and Lutjanus erythropterus) were tagged by members of the Australian National Sportsfishing Association (ANSA) in Queensland between 1986 and 2003. Of the 14,757 fish tagged, 1607 were recaptured and we analysed these data to describe movement and determine factors likely to impact release survival. All species were classified as residents since over 80% of recaptures for each species occurred within 1 km of the release site. Few individuals (range 0.8-5%) were recaptured more than 20 km from their release point. L. sebae had a higher recapture rate (19.9%) than the other species studied (range 2.1-11.7%). Venting swimbladder gases, regardless of whether or not fish appeared to be suffering from barotrauma, significantly enhanced (P < 0.05) the survival of L. sebae and L. malabaricus but had no significant effect (P > 0.05) on L. erythropterus. The condition of fish on release, subjectively assessed by anglers, was only a significant effect on recapture rate for L. sebae where fish in "fair" condition had less than half the recapture rate of those assessed as in "excellent" or "good" condition. The recapture rate of L. sebae and L. laticaudis was significantly (P < 0.05) affected by depth with recapture rate declining in depths exceeding 30 m. Overall, the results showed that depth of capture, release condition and treatment for barotrauma influenced recapture rate for some species but these effects were not consistent across all species studied. Recommendations were made to the ANSA tagging clubs to record additional information such as injury, hooking location and hook type to enable a more comprehensive future assessment of the factors influencing release survival.

The effects of salivary gland extracts from Boophilus microplus ticks on mitogen-stimulated bovine lymphocytes

The effect of salivary gland extract (SGE) from the tick Boophilus microplus was examined in mitogen-stimulated lymphocytes in vitro. SGE was added to lymphocytes of seven cattle together with the mitogens concanavalin A (ConA), phytohaemagglutinin (PHA) and pokeweed mitogen (PWM). Semi-purified B cells from another seven cattle were stimulated with the mitogen lipopolysaccharide (LPS). PHA and ConA stimulated proliferation of lymphocytes to the same extent, but the inhibition due to SGE of Boophilus microplus on the proliferative response stimulated by PHA (39.0% ± 9.3%) was less than the inhibition of proliferative response stimulated by ConA (75.4% ± 6.9%). In contrast, SGE of B. microplus stimulated the proliferation of B cells in the presence of LPS in a dose-dependent manner. Enhanced stimulation of B cells by SGE at >4 μg in culture was greater than twice that observed when B cells were stimulated by LPS alone. SGE does not have a direct suppressive effect on bovine B cell proliferation; however, in vivo the effectiveness of B cell responses might be influenced by other immune factors, such as cytokine profiles.

Salmonella and on-farm risk factors in healthy slaughter-age cattle and sheep in eastern Australia

To examine healthy slaughter-age cattle and sheep on-farm for the excretion of Salmonella serovars in faeces and to identify possible risk factors using a questionnaire. The study involved 215 herds and flocks in the four eastern states of Australia, 56 with prior history of salmonellosis. Production systems examined included pasture beef cattle, feedlot beef cattle, dairy cattle, prime lambs and mutton sheep and animals were all at slaughter age. From each herd or flock, 25 animals were sampled and the samples pooled for Salmonella culture. All Salmonella isolated were serotyped and any Salmonella Typhimurium isolates were phage typed. Questionnaires on each production system, prepared in Epi Info 6.04, were designed to identify risk factors associated with Salmonella spp excretion, with separate questionnaires designed for each production system. Salmonellae were identified in all production systems and were more commonly isolated from dairies and beef feedlots than other systems. Statistical analysis revealed that dairy cattle were significantly more likely to shed Salmonella in faeces than pasture beef cattle, mutton sheep and prime lambs (P < 0.05). A wide diversity of Salmonella serovars, all of which have been isolated from humans in Australia, was identified in both cattle and sheep. Analysis of the questionnaires showed access to new arrivals was a significant risk factor for Salmonella excretion on dairy properties. For beef feedlots, the presence of large numbers of flies in the feedlot pens or around stored manure were significant risk factors for Salmonella excretion. Dairy cattle pose the highest risk of all the slaughter-age animals tested. Some of the identified risk factors can be overcome by improved management practices, especially in relation to hygiene.

Modelling environmental effects on phenology and canopy development of diverse sorghum genotypes

The ability to predict phenology and canopy development is critical in crop models used for simulating likely consequences of alternative crop management and cultivar choice strategies. Here we quantify and contrast the temperature and photoperiod responses for phenology and canopy development of a diverse range of elite Indian and Australian sorghum genotypes (hybrid and landrace). Detailed field experiments were undertaken in Australia and India using a range of genotypes, sowing dates, and photoperiod extension treatments. Measurements of timing of developmental stages and leaf appearance were taken. The generality of photo-thermal approaches to modelling phenological and canopy development was tested. Environmental and genotypic effects on rate of progression from emergence to floral initiation (E-FI) were explained well using a multiplicative model, which combined the intrinsic development rate (Ropt), with responses to temperature and photoperiod. Differences in Ropt and extent of the photoperiod response explained most genotypic effects. Average leaf initiation rate (LIR), leaf appearance rate and duration of the phase from anthesis to physiological maturity differed among genotypes. The association of total leaf number (TLN) with photoperiod found for all genotypes could not be fully explained by effects on development and LIRs. While a putative effect of photoperiod on LIR would explain the observations, other possible confounding factors, such as air-soil temperature differential and the nature of model structure were considered and discussed. This study found a generally robust predictive capacity of photo-thermal development models across diverse ranges of both genotypes and environments. Hence, they remain the most appropriate models for simulation analysis of genotype-by-management scenarios in environments varying broadly in temperature and photoperiod.

From inferential statistics to climate knowledge

Climate variability and change are risk factors for climate sensitive activities such as agriculture. Managing these risks requires "climate knowledge", i.e. a sound understanding of causes and consequences of climate variability and knowledge of potential management options that are suitable in light of the climatic risks posed. Often such information about prognostic variables (e.g. yield, rainfall, run-off) is provided in probabilistic terms (e.g. via cumulative distribution functions, CDF), whereby the quantitative assessments of these alternative management options is based on such CDFs. Sound statistical approaches are needed in order to assess whether difference between such CDFs are intrinsic features of systems dynamics or chance events (i.e. quantifying evidences against an appropriate null hypothesis). Statistical procedures that rely on such a hypothesis testing framework are referred to as "inferential statistics" in contrast to descriptive statistics (e.g. mean, median, variance of population samples, skill scores). Here we report on the extension of some of the existing inferential techniques that provides more relevant and adequate information for decision making under uncertainty.

Value-adding Australian sardines: Factors affecting rates of deterioration in sardine (Sardinops sagax) quality during post-harvest handling

Deficiencies in sardine post-harvest handling methods were seen as major impediments to development of a value-adding sector supplying Australian bait and human consumption markets. Factors affecting sardine deterioration rates in the immediate post-harvest period were investigated and recommendations made for alternative handling procedures to optimise sardine quality. Net to factory sampling showed that post-mortem autolysis was probably caused by digestive enzyme activity contributing to the observed temporal increase in sardine Quality Index. Belly burst was not an issue. Sardine quality could be maintained by reducing tank loading, and rapid temperature reduction using dedicated, on-board value-adding tanks. Fish should be iced between the jetty and the processing factory, and transport bins chilled using an efficient cooling medium such as flow ice.

Factors influencing the release and establishment of weed biological control agents

Mike Day and colleagues recently published their paper 'Factors influencing the release and establishment of weed biocontrol agents' in Proceedings of the 16th Australian Weeds Conference. The CRC for Australian Weed Management facilitated an investigation into the factors influencing the release and establishment of weed biological control agents on a wide variety of Australian weeds. The investigation improved the understanding of post-release ecology of biocontrol agents and generated recommendations for best practice. Factors affecting successful establishment on the weed include host plant characteristics, size of releases, dispersal power of the agent, predation and parasitism, and climate. A best practice guide was produced by the CRC to assist practitioners in designing robust release strategies to increase rates of establishment.

Radish sprouts versus broccoli sprouts: a comparison of anti-cancer potential based on glucosinolate breakdown products.

Radish sprouts and broccoli sprouts have been implicated in having a potential chemoprotective effect against certain types of cancer. Each contains a glucosinolate that can be broken down to an isothiocyanate capable of inducing chemoprotective factors known as phase 2 enzymes. In the case of broccoli, the glucosinolate, glucoraphanin, is converted to an isothiocyanate, sulforaphane, while in radish a similar glucosinolate, glucoraphenin, is broken down to form the isothiocyanate, sulforaphene. When sprouts are consumed fresh (uncooked), however, the principal degradation product of broccoli is not the isothiocyanate sulforaphane, but a nitrile, a compound with little anti-cancer potential. By contrast, radish sprouts produce largely the anti-cancer isothiocyanate, sulforaphene. The reason for this difference is likely to be due to the presence in broccoli (and absence in radish) of the enzyme cofactor, epithiospecifier protein (ESP). In vitro induction of the phase 2 enzyme, quinone reductase (QR), was significantly greater for radish sprouts than broccoli sprouts when extracts were self-hydrolysed. By contrast, boiled radish sprout extracts (deactivating ESP) to which myrosinase was subsequently added, induced similar QR activity to broccoli sprouts. The implication is that radish sprouts have potentially greater chemoprotective action against carcinogens than broccoli sprouts when hydrolysed under conditions similar to that during human consumption.

Factors affecting localized abundance and distribution of lesser mealworm in earth-floor broiler houses in subtropical Australia.

Factors that influence the localized abundance and distribution of lesser mealworm, Alphitobius diaperinus (Panzer), in litter of two compacted earth-floor broiler houses in subtropical Australia were studied using various experimental manipulations. Numbers of lesser mealworms substantially increased inside caged areas and under uncaged empty feed pans placed in open areas of the houses. These populations were found to be localized and independent of chicken-feed, manure, and high beetle populations that normally occur under existing feed pans. Substantial horizontal movement of larvae to under feed pans was recorded. Placing metal barriers around these pans significantly restricted this movement. In almost all treatments, lesser mealworms typically peaked in numbers during the middle of the flock time. This temporal pattern of abundance also was observed under pans within barriers, where relatively low insect numbers occurred, but it was not observed in uncaged open areas (where chickens had complete access). It is likely that larvae do not establish in open areas, but fluctuate in numbers as they either move to refuges away from chickens or suffer high rates of mortality. In these refuges, larvae peak in numbers and then leave the litter environment to pupate in the earth floor before the end of the flock time. This behavior might be exploited for management of lesser mealworm by targeting applications of control agents.

Interactions between rotation breaks, tillage and N management on sugarcane grown at Bundaberg and Ingham.

The impact of cropping histories (sugarcane, maize and soybean), tillage practices (conventional tillage and direct drill) and fertiliser N in the plant and 1st ratoon (1R) crops of sugarcane were examined in field trials at Bundaberg and Ingham. Average yields at Ingham (Q200) and Bundaberg (Q151) were quite similar in both the plant crop (83 t/ha and 80 t/ha, respectively) and the 1R (89 t/ha v 94 t/ha, respectively), with only minor treatment effects on CCS at each site. Cane yield responses to tillage, break history and N fertiliser varied significantly between sites. There was a 27% yield increase in the plant crop from the soybean fallow at Ingham, with soybeans producing a yield advantage over continuous cane, but there were no clear break effects at Bundaberg - possibly due to a complex of pathogenic nematodes that responded differently to soybeans and maize breaks. There was no carryover benefit of the soybean break into the 1R crop at Ingham, while at Bundaberg the maize break produced a 15% yield advantage over soybeans and continuous cane. The Ingham site recorded positive responses to N fertiliser addition in both the plant (20% yield increase) and 1R (34% yield increase) crops, but there was negligible carryover benefit from plant crop N in the 1R crop, or of a reduced N response after a soybean rotation. By contrast, the Bundaberg site showed no N response in any history in the plant crop, and only a small (5%) yield increase with N applied in the 1R crop. There was again no evidence of a reduced N response in the 1R crop after a soybean fallow. There were no significant effects of tillage on cane yields at either site, although there were some minor interactions between tillage, breaks and N management in the 1R crop at both sites. Crop N contents at Bundaberg were more than 3 times those recorded at Ingham in both the plant and 1R crops, with N concentrations in millable stalk at Ingham suggesting N deficiencies in all treatments. There was negligible additional N recovered in crop biomass from N fertiliser application or soybean residues at the Ingham site. There was additional N recovered in crop biomass in response to N fertiliser and soybean breaks at Bundaberg, but effects were small and fertiliser use efficiencies poor. Loss pathways could not be quantified, but denitrification or losses in runoff were the likely causes at Ingham while leaching predominated at Bundaberg. Results highlight the complexity involved in developing sustainable farming systems for contrasting soil types and climatic conditions. A better understanding of key sugarcane pathogens and their host range, as well as improved capacity to predict in-crop N mineralisation, will be key factors in future improvements to sugarcane farming systems.

Factors contributing to wear tolerance of Bermudagrass (Cynodon dactylon (L.) Pers., C. dactylon x C. transvaalensis Burtt-Davey) on a sand-based profile under simulated sports field conditions

Wear resistance and recovery of 8 Bermudagrass (Cynodon dactylon (L.) Pers.) and hybrid Bermudagrass (C. Dactylon x C. transvaalensis Burtt-Davey) cultivars grown on a sandbased soil profile near Brisbane, Australia, were assessed in 4 wear trials conducted over a two year period. Wear was applied on a 7-day or a 14-day schedule by a modified Brinkman Traffic Simulator for 6-14 weeks at a time, either during winter-early spring or during summer-early autumn. The more frequent wear under the 7-day treatment was more damaging to the turf than the 14-day wear treatment, particularly during winter when its capacity for recovery from wear was severely restricted. There were substantial differences in wear tolerance among the 8 cultivars investigated, and the wear tolerance rankings of some cultivars changed between years. Wear tolerance was associated with high shoot density, a dense stolon mat strongly rooted to the ground surface, high cell wall strength as indicated by high total cell wall content, and high levels of lignin and neutral detergent fiber. Wear tolerance was also affected by turf age, planting sod quality, and wet weather. Resistance to wear and recovery from wear are both important components of wear tolerance, but the relative importance of their contributions to overall wear tolerance varies seasonally with turf growth rate.

A review of factors that impact on the capacity of beef cattle females to conceive, maintain a pregnancy and wean a calf - implications for reproductive efficiency in northern Australia.

A review of factors that may impact on the capacity of beef cattle females, grazing semi-extensive to extensive pastures in northern Australia, to conceive, maintain a pregnancy and wean a calf was conducted. Pregnancy and weaning rates have generally been used to measure the reproductive performance of herds. However, this review recognises that reproductive efficiency and the general measures associated with it more effectively describe the economic performance of beef cattle enterprises. More specifically, reproductive efficiency is influenced by (1) pregnancy rate which is influenced by (i) age at puberty; (ii) duration of post-partum anoestrus; (iii) fertilisation failure and (iv) embryo survival; while (2) weight by number of calves per breeding female retained for mating is influenced by (i) cow survival; (ii) foetal survival; and (iii) calf survival; and (3) overall lifetime calf weight weaned per mating. These measures of reproductive efficiency are discussed in depth. Further, a range of infectious and non-infectious factors, namely, environmental, physiological, breed and genetic factors and their impact on these stages of the reproductive cycle are investigated and implications for the northern Australian beef industry are discussed. Finally, conclusions and recommendations to minimise reproductive inefficiencies based on current knowledge are presented.

Polychaete-assisted sand filters – prawn farm wastewater remediation trial

Medium bedding sand which is commonly available in coastal sedimentary deposits, and a marine polychaete-worm species from Moreton Bay recently classified as Perinereis helleri (Nereididae), were deployed in a simple low-maintenance sand filter design that potentially has application at large scale. Previous work had shown that this physical and biological combination can provide a new option for saline wastewater treatment, since the worms help to prevent sand filter blocking with organic debris and offer a profitable by-product. To test the application of this new concept in a commercial environment, six 1.84 m2 Polychaete-assisted sand filters were experimentally tested for their ability to treat wastewater from a semi-intensive prawn culture pond. Polychaetes produced exclusively on the waste nutrients that collected in these gravity-driven sand filters were assessed for their production levels and nutritional contents. Water parameters studied included temperature, salinity, pH, dissolved oxygen (DO), oxidation/ reduction potential (redox), suspended solids, chlorophyll a, biological oxygen demand (BOD), and common forms of nitrogen and phosphorus. Pond water which had percolated through the sand bed had significantly lower pH, DO and redox levels compared with inflow water. Suspended solids and chlorophyll a levels were consistently more than halved by the process. Reductions in BOD appeared dependant on regular subsurface flows. Only marginal reductions in total nitrogen and phosphorus were documented, but their forms were altered in a potentially useful way: dissolved forms (ammonia and orthophosphate) were generated by the process, and this remineralisation also seemed to be accentuated by intermittent flow patterns. Flow rates of approximately 1,500 L m-2 d-1 were achieved suggesting that a 1 ha polychaete bed of this nature could similarly treat the discharge from a 10 ha semi-intensive prawn farm. Sixteen weeks after stocking sand beds with one-month-old P. helleri, over 3.6 kg of polychaete biomass (wet weight) was recovered from the trial. Production on a sand bed area basis was 328 g m-2. Similar (P>0.05) overall biomass production was found for the two stocking densities tested (2000 and 6000 m-2; n = 3), but survival was lower and more worms were graded as small (<0.6 g) when produced at the higher density (28.2 ± 1.5 % and approx. 88 %, respectively) compared with the lower density (46.8 ± 4.4 % and approx. 76 %, respectively). When considered on a weight for weight basis, about half of the worm biomass produced was generally suitable for use as bait. The nutritional contents of the worms harvested were analysed for different stocking densities and graded sizes. These factors did not significantly affect their percentages of dry matter (DM) (18.23 ± 0.57 %), ash (19.77 ± 0.80 % of DM) or gross energy 19.39 ± 0.29 MJ kg-1 DM) (n = 12). Although stocking density did not affect the worms’ nitrogen and phosphorus contents, small worms had a higher mean proportion of nitrogen and phosphorus (10.57 ± 0.17 % and 0.70 ± 0.01 % of DM, respectively) than large worms (9.99 ± 0.12 % and 0.65 ± 0.01 % of DM, respectively) (n = 6). More lipid was present in large worms grown at the medium density (11.20 ± 0.19 %) compared with the high density (9.50 ± 0.31 %) and less was generally found in small worms (7.1-7.6 % of DM). Mean cholesterol and total phospholipid levels were 5.24 ± 0.15 mg g-1 and 13.66 ± 2.15 mg g-1 DM, respectively (n = 12). Of the specific phospholipids tested, phosphatidyl-serine or sphingomyelin were below detection limits (<0.05 mg g-1), whilst mean levels of phosphatidyl-ethanolamine, phosphatidyl-inositol, phosphatidyl-choline and lysophosphatidyl-choline were 6.89 ± 1.09, 0.89 ± 0.26, 4.04 ± 1.17 and 1.84 ± 0.37 mg g-1, respectively (n = 12). Culture density generally had a more pronounced effect on phospholipid contents than did size of worms. By contrast, worm size had a more pronounced effect on total fatty acid contents, with large worms containing significantly higher (P<0.001) levels on a DM basis (46.88 ± 2.46 mg g-1) than smaller worms (27.76 ± 1.28 mg g-1). A very broad range of fatty acids were detected with palmitic acid being the most heavily represented class (up to 14.23 ± 0.49 mg g-1 DM or 27.28 ± 0.22 % of total fatty acids). Other heavily represented classes included stearic acid (7.4-8.8 %), vaccenic acid (6.8-7.8 %), arachidonic acid (3.5-4.4 %), eicosapentaenoic acid (9.9-13.8 %) and docosenoic acid (5.7-7.0 %). Stocking density did not affect (P>0.05) the levels of amino acids present in polychaete DM, but there was generally less of each amino acid tested on a weight per weight basis in large worms than in small worms. This difference was significant (P<0.05) for the most heavily represented classes being glutamic acid (73-77 mg g-1), aspartic acid (50-54 mg g-1), and glycine (46-53 mg g-1). These results demonstrate how this polychaete species can be planted and sorted at harvest according to various strategies aimed at providing biomass with specific physical and nutritional qualities for different uses.