Visualization of dust explosion under microgravity conditions

The objective of this work was to apply visualization methods to the experimental study of cornstarch dust-air mixture combustion in a closed vessel volume under microgravity conditions. A dispersion system with a small scale of turbulence was used in the experiments. A gas igniter initiated combustion of the dust-air mixture in the central or top part of the vessel. Flame propagation through the quiescent mixture was recorded by a high-speed video camera. Experiments showed a very irregular flame front and irregular distribution of the regions with local reactions of re-burning behind the flame front. at a later stage of combustion. Heat transfer from the hot combustion products to the walls is shown to have an important role in the combustion development. The maximum pressure and maximum rate of pressure rise were higher for flame propagation from the vessel center than for flame developed from the top pan of the vessel. The reason for smaller increase of the rate of pressure rise, for the flame developed from the top of the vessel. in comparison with that developed from the vessel center, was much faster increase of the contact surface of the combustion gases with the vessel walls. It was found that in dust flames only small part of hear was released at the flame front, the remaining part being released far behind it.

Reliable Validation Based on Optical Flow Visualization for CFD Simulations

A reliable validation based on the optical flow visualization for numerical simulations of complex flowfields is addressed in this paper. Several test cases, including two-dimensional, axisymmetric and three-dimensional flowfields, were presented to demonstrate the effectiveness of the validation and gain credibility of numerical solutions of complex flowfields. In the validation, images of these flowfields were constructed from numerical results based on the principle of the optical flow visualization, and compared directly with experimental interferograms. Because both experimental and numerical results are of identical physical representation, the agreement between them can be evaluated effectively by examining flow structures as well as checking discrepancies in density. The study shows that the reliable validation can be achieved by using the direct comparison between numerical and experiment results without any loss of accuracy in either of them.

VISUALIZATION RESULTS OF AXISYMMETRICAL WAKE FLOW WITH/WITHOUT ACOUSTIC EXCITATION

Visualization results demonstrate the evolution of Kelvin-Helmholtz unstable waves into vortex pairing in a separated shear layer of a blunf circular. The results with acoustic excitation are quite different from that without acoustic excitation, and the phenomenon with excitation in a separated shear layer follows the rule of Devil s staircase, which always occurs in a non-linear dynamical system of two coupling vibrators.

Numerical simulation of axisymmetric unsteady incompressible flow by a vorticity-velocity method

A new numerical method for solving the axisymmetric unsteady incompressible Navier-Stokes equations using vorticity-velocity variables and a staggered grid is presented. The solution is advanced in time with an explicit two-stage Runge-Kutta method. At each stage a vector Poisson equation for velocity is solved. Some important aspects of staggering of the variable location, divergence-free correction to the velocity held by means of a suitably chosen scalar potential and numerical treatment of the vorticity boundary condition are examined. The axisymmetric spherical Couette flow between two concentric differentially rotating spheres is computed as an initial value problem. Comparison of the computational results using a staggered grid with those using a non-staggered grid shows that the staggered grid is superior to the non-staggered grid. The computed scenario of the transition from zero-vortex to two-vortex flow at moderate Reynolds number agrees with that simulated using a pseudospectral method, thus validating the temporal accuracy of our method.

Visualization of turbulence and internal waves in a stratified fluid

A new method for measuring the density, temperature and velocity of N2 gas flow by laser induced biacetyl phosphorescence is proposed. The characteristics of the laser induced phosphorescence of biacetyl mixed with N2 are investigated both in static gas and in one-dimensional flow along a pipe with constant cross section. The theoretical and experimental investigations show that the temperature and density of N2 gas flow could be measured by observing the phosphorescence lifetime and initial intensity of biacetyl triplet (3Au) respectively. The velocity could be measured by observing the time-of-flight of the phosphorescent gas after pulsed laser excitation. The prospect of this method is also discussed.

Visualization of molecule interaction between antigen and antibody - One of ellipsometric imaging applications

It is to investigate molecule interactions between antigen and antibody with ellipsometric imaging technique and demonstrate some features and possibilities offered by applications of the technique. Molecule interaction is an important interest for molecule biologist and immunologist. They have used some established methods such as immufluorcence, radioimmunoassay and surface plasma resonance, etc, to study the molecule interaction. At the same time, experimentalists hope to use some updated technique with more direct visual results. Ellipsometric imaging is non-destructive and exhibits a high sensitivity to phase transitions with thin layers. It is capable of imaging local variations in the optical properties such as thickness due to the presence of different surface concentration of molecule or different deposited molecules. If a molecular mono-layer (such as antigen) with bio-activity were deposited on a surface to form a sensing surface and then incubated in a solution with other molecules (such as antibody), a variation of the layer thickness when the molecules on the sensing surface reacted with the others in the solution could be observed with ellipsometric imaging. Every point on the surface was measured at the same time with a high sensitivity to distinguish the variation between mono-layer and molecular complexes. Ellipsometric imaging is based on conventional ellipsometry with charge coupled device (CCD) as detector and images are caught with computer with image processing technique. It has advantages of high sensitivity to thickness variation (resolution in the order of angstrom), big field of view (in square centimeter), high sampling speed (a picture taken within one second), and high lateral resolution (in the order of micrometer). Here it has just shown one application in study of antigen-antibody interaction, and it is possible to observe molecule interaction process with an in-situ technique.

Direct visualization of the dynamics of membrane-anchor proteins in living cells

Dynamic properties of proteins have crucial roles in understanding protein function and molecular mechanism within cells. In this paper, we combined total internal reflection fluorescence microscopy with oblique illumination fluorescence microscopy to observe directly the movement and localization of membrane-anchored green fluorescence proteins in living cells. Total internal reflect illumination allowed the observation of proteins in the cell membrane of living cells since the penetrate depth could be adjusted to about 80 nm, and oblique illumination allowed the observation of proteins both in the cytoplasm and apical membrane, which made this combination a promising tool to investigate the dynamics of proteins through the whole cell. Not only individual protein molecule tracks have been analyzed quantitatively but also cumulative probability distribution function analysis of ensemble trajectories has been done to reveal the mobility of proteins. Finally, single particle tracking has acted as a compensation for single molecule tracking. All the results exhibited green fluorescence protein dynamics within cytoplasm, on the membrane and from cytoplasm to plasma membrane.

VISUALIZATION OF THE CHROMOSOME SCAFFOLD IN A PRIMITIVE EUKARYOTE DINOFLAGELLATE CRYPTHECOAINIUM-COHNII

The chromosome scaffolds in higher eukaryotic nuclei have been described elsewhere. But it is unknown when they evolved. The dinoflagellates are the primitive organisms that may be the intermediate between prokaryotes and eukaryotes. Combining chromosome scaffold preparation methods with embedment-free section microscopy, we demonstrate that the dinoflagellate Crypthecodinium cohnii chromosome retains a protein scaffold after the depletion of DNA and soluble proteins. This scaffold preserves the morphology characteristic of the chromosome. Two-dimensional electrophoreses show that the chromosome scaffolds are mainly composed of acidic proteins. Our results suggest that a framework similar to the chromosome scaffold in the mammalian cell appeared in the primitive eukaryote. We propose that the chromosome scaffold possibly originated from the early stages of eukaryote evolution.

基于等高线的黄土高原小流域地形虚拟

黄土高原地形三维虚拟是"数字黄土高原"的基础,可为区域水土保持生态建设提供科技支撑。针对直接在地理信息系统软件中观察三维场景存在的控制交互能力不足问题,提出综合利用地理信息系统软件的地形插值算法,基于MFC框架下的OpenGL程序设计的思路,实现地形的真实感三维虚拟。以黄土丘陵沟壑区康家沟小流域为例,等高线数据在AutoCAD和ArcView软件中处理,生成ASCII格式的规则网格DEM数据,依据它们绘制三角形带,采用加权平均法求得各点的法向量,设置光照与材质模式,添加动态天空背景,实现了该流域地形的真实感三维虚拟,并增加交互能力,完成自由漫游与多角度观察。

Optimization of evanescent wave imaging for the visualization of protein adsorption layers

We have optimized the settings of evanescent wave imaging for the visualization of a protein adsorption layer. The enhancement of the evanescent wave at the interface brought by the incident angle, the polarized state of light beam as well as a gold layer is considered. In order to improve the image contrast of a protein monolayer in experiments, we have optimized three factors-the incident angle, the polarization of light beam, and the thickness of an introduced thin gold layer with a theoretical simulation.

Web-based spatiotemporal visualization of marine environment data

With long-term marine surveys and research, and especially with the development of new marine environment monitoring technologies, prodigious amounts of complex marine environmental data are generated, and continuously increase rapidly. Features of these data include massive volume, widespread distribution, multiple-sources, heterogeneous, multi-dimensional and dynamic in structure and time. The present study recommends an integrative visualization solution for these data, to enhance the visual display of data and data archives, and to develop a joint use of these data distributed among different organizations or communities. This study also analyses the web services technologies and defines the concept of the marine information gird, then focuses on the spatiotemporal visualization method and proposes a process-oriented spatiotemporal visualization method. We discuss how marine environmental data can be organized based on the spatiotemporal visualization method, and how organized data are represented for use with web services and stored in a reusable fashion. In addition, we provide an original visualization architecture that is integrative and based on the explored technologies. In the end, we propose a prototype system of marine environmental data of the South China Sea for visualizations of Argo floats, sea surface temperature fields, sea current fields, salinity, in-situ investigation data, and ocean stations. An integration visualization architecture is illustrated on the prototype system, which highlights the process-oriented temporal visualization method and demonstrates the benefit of the architecture and the methods described in this study.