Anisotropic, gradient and metal-like mechanical behaviors of teeth and their implications on tooth functions

The anisotropy and gradient of the elastic modulus and the hardness of teeth were investigated by means of instrumented indentation method. Such properties are attributed to the unique microstructures of teeth based on scanning electron microscopic analysis. By comparing the relationship between the ratio of hardness to the reduced elastic modulus and the ratio of elastic unloading work to the total work of teeth in course of indentation to those of other materials, we found that the material behaviors of teeth display metal-like characteristics rather than ceramics as considered traditionally. These material behaviors and relevant functions are discussed briefly.

Effect of dentin tubules on the mechanical properties of dentin - part III: Numerical, analysis

Imitating a real tooth and the periodontal supporting tissues, we have established a 2D finite element model and carried out a numerical analysis based on the inhomogeneous and anisotropic (IA) stress-strain relation and strength model of dentin proposed in the preceding Parts I and II, and the conventional homogeneous and isotropic (III) model, respectively. Quite a few cases of loadings for a non-defected and a defected tooth are considered. The numerical results show that the stress level predicted by the IA model is remarkably higher than that by the III model, revealing that the effect of the dentin tubules should be taken into a serious consideration from the viewpoint of biomechanics.

High-efficiency reflective diffraction gratings in fused silica as (de)multiplexers at 1.55 mu m for dense wavelength division multiplexing application

We describe high-efficiency, high-dispersion reflection gratings fabricated in bulk fused Silica illuminated by incident lights in the C + L bands as (de)multiplexers for dense wavelength division multiplexing (DWDM) application. Based on the phenomenon of total internal reflection, gratings with optimized profile parameters exhibit diffraction efficiencies of more than 90% under TM- and TE-polarized incident lights for 101-nm spectral bandwidths (1520-1620 nm) and can reach an efficiency of greater than 97% for both polarizations at a wavelength of 1550 nm. Without loss of metal absorption, without coating of dielectric film layers, and independent of tooth shape, this new kind of grating should be of great interest for DWDM application. (C) 2005 Optical Society of America.

X 射线转换屏用Tb3+激活磷酸盐发光玻璃

Phosphate glasses 60P2O5-15CS2O- 15Al2O3-10BaO were made by high temperature melt-annealing method. The absorption spectra, excitation spectra and emission spectra of Gd³⁺-Tb³⁺ and Ce3+-Gd³⁺-Tb³⁺ co-doped phosphate glass 60P2O5-15CS2O- 15Al2O3-10BaO were studied. The experimental results indicate that, the doping of Ce3+ and Gd³⁺ in Tb³⁺ phosphate glass has a good effect on the 545 nm emission of Tb³⁺ at UV excitation. The Ce3+-Gd³⁺-Tb³⁺ co-doped phosphate glass have a good x-ray luminescence at the radiation of x-ray with energy in 50-120 kev, and a high space resolution. The Ce3+-Gd³⁺-Tb³⁺ co-doped phosphate luminescence glass is a promising material for using in the digital radiography system in medical devices.

Description of a new genus and two new species of labeonine fishes from South China (Teleostei : Cyprinidae)

A new genus and two new species are described from the Pearl River drainage in Guangxi Province, South China. Hongshuia, new genus, can be distinguished from all other Asian genera of the Labeonini by having a lower lip with its median lobe modified into a round, fleshy plate peripherally greatly protruded so as to form a ring-like fold that is posteromedially continuous with the mental region, and centrally sunken so as to form a round, flat, fleshy pad. This genus is distinct from all other Asian labeonine genera of the Garrina except for one newly described species of Parasinilabeo ( P. longibarbus), Pseudocrossocheilus, and Sinocrossocheilus, in the presence of well-developed maxillary barbels. Hongshuia differs from the above three genera in the lower lip morphology, and further from both Pseudocrossocheilus and Qianlabeo in the number of pharyngeal tooth rows and from Sinocrossocheilus in the colour pattern. Two new species, H. banmo and H. paoli, differ in the distribution density and degree of development of papillae on the rostral fold, depth of indentations on the distal edge of the rostral fold, presence or absence of papillae on the lower lip, size and shape of tubercles on the tip of the snout and anterior portion of the lachrymal, length, position and colour pattern of the dorsal fin, and snout length.

Redescription of Nais inflata Liang (Annelida : Oligochaeta) from China

Nais inflata Liang 1963 is redescribed on the basis of fully mature specimens collected from several localities of the Yangtze River and Yellow River. The observations and redescription resulting from the study of mature specimens supports N. inflata as a valid species. This species is characterized by a thickened body, the ventral crotchets all of the same type with distal tooth usually longer than proximal one, a greater number of dorsal chaetae per bundle, stout dorsal needles with equal minute bifid teeth (<1 mu m), presence of penial chaetae, and prostate glands on vasa deferentia instead of atria. The species is most closely related to N. communis Piguet, 1906 and N. variabilis Piguet, 1906. A table comparing allied species is provided.

Linichthys: A new genus of Chinese cyprinid fishes (Teleostei : Cypriniformes)

yLinichthys, new genus, is proposed for Barbodes laticeps Lin and Zhang, 1986. It can be separated from all other genera of Asian Barbinae in having a shallow depression extending along the median portion of the upper lip. Linichthys is superficially very similar to the type species of a monotypic Chinese cyprinid cavefish genus, Typhlobarbus nudiventris, in having an elongate and somewhat compressed body form, a truncate distal margin of the dorsal fin, and a soft and smooth last unbranched dorsal-fin ray, all of them being atypical for most of Asian barbins. The two genera differ in size of the eye and the number of rows of pharyngeal tooth. Although the same body form and/or structure of the dorsal fin are also shared with some species currently placed in other genera of Asian barbins, the recognition of Linichthys is warranted because of their marked differences in other characters. A redescription is also provided for the type species of the monotypic genus, Linichthys laticeps. It is known only from the upper and middle Zhu Jiang basin and the upper Chang Jiang basin in the city of Guiyang, Guizhou Province, South China.

Redescription of Difflugia tuberspinifera Hu, Shen, Gu et Gong, 1997 (Protozoa : Rhizopoda : Arcellinida : Difflugiidae) from China

The freshwater testate amoeba Difflugia tuberspinifera Hu et al. 1997 collected from pond and lake in China, is investigated by light and scanning electron microscopy. This little known taxon is redescribed and its morphology, biometry and ecology are supplied. After carefully comparison with other six similar species including Difflugia bartosi Stepanek, D. corona Wallich, D. corona cashi Deflandre, D. corona tuberculata Vucetich, D. muriformis Gauthier-Lievre et Thomas and Netzelia tuberculata (Wallich) Netzal we believe that the sub-spherical to spherical shell, the mulberry-shaped appearance, the 7-10 apertural tooth-like structures, the short collar and the conical spines numbering from 4 to 8 at the upper equatorial region in D. tuberspinifera set it apart from other species. Besides, statistical analysis indicates that D. tuberspinifera is a size-monomorphic species characterized by a main-size class and a small size range and the shell height is significant correlated with other morphometric characters at p < 0.05 excepting the number of aperture tooth-like structures and the number of spines. Moreover, D. tuberspinifera inhabits not only lotic but also lentic environment.

Microorganisms linked to Neoproterozoic microspar carbonate sedimentation in the Jilin-Liaoning area

Molar-tooth carbonate refers to a sort of rock that has ptygmatical folded structure comparable to the ivory. This kind of carbonate exists in a special time range (from Middle to Neoproterozoic). Its origin and the possibility to use it in stratigraphic correlation of the paleocontinent is the key task of the IGCP447, a project on Proterozoic molar tooth carbonates and the evolution of the earth (2001-2005). The importance lies in that the molar-tooth structure is the key to solving problems related to Precambrian biological and global geochemical events. The molar-tooth structure is associated with microorganisms. Development and recession of such carbonates have relations with the evolution process of early lives and abrupt changes in sea carbonate geochemistry. In recent years, based on researches on petrology, geochemistry and Sr isotope of molar-tooth carbonate in the Jilin-Liaoning and Xuzhou-Huaiyang area, the authors hold that it can be used as a marker for stratigraphic sequence and sedimentary facies analyses.

Coupling coefficients of gratings with graded refractive index waveguides

In this paper, the effective coupling coefficient k(eff) and the self-coupling coefficient zeta(1) are introduced to describe the characteristic of gratings in a resonant situation when the effects of radiation and other partial waves coupling are considered. The dependence of these two coupling coefficients on grating tooth shapes and depths and the dimensions of graded refractive index (GRIN) waveguides is numerically analysed. The results show that the gratings with linear GRIN waveguides have the largest \k(eff)\. The possibility of realizing a complex-coupled DFB laser, even a pure gain or loss coupled DFB laser, employing only a real refractive index coupled grating is also discussed.

Microorganisms linked to Neoproterozoic microspar carbonate sedimentation in the Jilin-Liaoning area

Molar-tooth carbonate refers to a sort of rock that has ptygmatical folded structure comparable to the ivory. This kind of carbonate exists in a special time range (from Middle to Neoproterozoic). Its origin and the possibility to use it in stratigraphic correlation of the paleocontinent is the key task of the IGCP447, a project on Proterozoic molar tooth carbonates and the evolution of the earth (2001-2005). The importance lies in that the molar-tooth structure is the key to solving problems related to Precambrian biological and global geochemical events. The molar-tooth structure is associated with microorganisms. Development and recession of such carbonates have relations with the evolution process of early lives and abrupt changes in sea carbonate geochemistry. In recent years, based on researches on petrology, geochemistry and Sr isotope of molar-tooth carbonate in the Jilin-Liaoning and Xuzhou-Huaiyang area, the authors hold that it can be used as a marker for stratigraphic sequence and sedimentary facies analyses.

角蟾科（Megophryidae; Anura）蝌蚪的形态多样性和生态适应

角蟾科（Megophryidae）是以角蟾属（Megophrys Kuhl and Van Hasselt, 1822）为模式属而建立的，隶于无尾目（Anura），变凹型亚目（Anomocoela）。角蟾科包括2 亚科11 属142 种，分布于东洋界，从巴基斯坦、中国西部向东直到菲律宾和苏达群岛；中国有9 属75 种分布于华中和华南地区。角蟾科被认为是原始的两栖动物之一，其分类学、系统学、生态学、动物地理学的研究均深受中外科学家的瞩目。近年来，通过形态学、古生物学、细胞学、生态学、支序系统学的研究，角蟾科的分类与系统学研究取得了较大进展。与成体形态和分子系统学研究结果相比较，蝌蚪的研究存在更多的问题和挑战，尚需深入研究：（1）角蟾科蝌蚪的形态多样性分析；（2）角蟾科的系统发育关系与蝌蚪的演化，以及口漏斗的起源；（3）角蟾科蝌蚪表型分化与栖息环境和觅食行为的适应演化。针对上述问题，本文对角蟾科9 属30 种蝌蚪的形态特征，包括外部宏观形态和口器外部结构特征、口器内部显微结构、唇齿和角质颌的亚显微结构作了深入细致、多层次的比较研究；通过12s rRNA 和cytochrome b 基因构建最大简约树，采用贝叶斯系统发育进行分析，蝌蚪型的演化采用祖先性状的重建方法分析；得到如下结论：1）初步将角蟾科蝌蚪分为4 种类型；并且建立了2 种新的角蟾科蝌蚪类型。A 型：拟髭蟾型蝌蚪，该型蝌蚪包括拟髭蟾属、髭蟾属、齿蟾属和齿突蟾属的物种；B 型：新类型，掌突蟾型蝌蚪，该型蝌蚪在本文中包括掌突蟾属、小臂蟾属的物种；C 型：新类型，短腿蟾型蝌蚪，一种特化类型，该型蝌蚪在本文中仅包括短腿蟾属的物种；D 型：角蟾型蝌蚪，该型蝌蚪在本文中包括无耳蟾属、小口拟角蟾属和异角蟾属的物种。2）对角蟾科的分类进行了修订：（1）支持角蟾科两个亚科的分类系统；（2）角蟾亚科包括拟角蟾属、异角蟾属、无耳蟾属和短腿蟾属；该亚科形态差异小，系统学关系比较复杂，暂不作族级分类的再划分；（3）拟髭蟾亚科分为2 个族：拟髭蟾族，该族物种具有类型A 的蝌蚪，包括4 个属：拟髭蟾属、髭蟾属、齿蟾属、齿突蟾属；掌突蟾族，该族物种具有类型B 的蝌蚪，包括2 个属：掌突蟾属和小臂蟾属。3）结合分子系统进化关系探讨了4 种蝌蚪类型的演化。（1）角蟾科蝌蚪的最近共同祖先来自于一类具有拟髭蟾型蝌蚪性状的蝌蚪；（2）掌突蟾型蝌蚪和角蟾亚科的蝌蚪是由具有拟髭蟾型蝌蚪性状的祖先蝌蚪分别演化而来；（3）短腿蟾型蝌蚪是角蟾型蝌蚪的一种特化类型；（4）外群蝌蚪具有与拟髭蟾型蝌蚪相似的性状，进一步印证了类拟髭蟾型蝌蚪是角蟾科蝌蚪的最近共同祖先的假说；（5）具有口漏斗的蝌蚪类型是由不具口漏斗的蝌蚪类型演化而来，在角蟾科中口漏斗是一种衍生性状。4）分析了角蟾科四种蝌蚪类型与栖息环境的适应演化。（1）角蟾科蝌蚪的口部和体形的变化反映了该科蝌蚪由缓流向类似静水生境的回水凼的渐变式适应，角蟾科蝌蚪的形态显示了多方面的适应变化；（2）随着蝌蚪类型由A 向D的演化，当水速较大时，拟髭蟾型的蝌蚪营流水攀吸型生活方式；当水速递减时，掌突蟾型蝌蚪营流水附着型生活方式；当水速进一步递减时，具有较小口漏斗的短腿蟾型蝌蚪和具有大漏斗的角蟾型蝌蚪营流水浮泳型生活。角蟾科蝌蚪对于水流递减的适应演化说明蝌蚪的生态学适应是具有进化意义的；（3）蝌蚪口器内部结构的分化揭示了蝌蚪和食性的适应关系，蝌蚪以口部的唇齿与角质颌刮取或吞吸水中的物质，然后，通过口乳突有选择地过滤进入口腔中食物。拟髭蟾亚科蝌蚪的唇齿多而窄，唇齿间距宽，颌鞘粗而稀，反映了其植食性为主的特点；它们的舌前乳突一般为指状，在口腔入口处所占面积小，其机械过滤的作用很多被唇齿和角质颌分担了；而角蟾亚科的蝌蚪，其角质颌弱，其舌前乳突一般为匙状，几乎填满了口腔入口处，因此舌前乳突起了主要的机械过滤作用。The family Megophryidae is the largest and most diverse families inArchaeobatrachia, and most of its species occur in India, Pakistan, and eastward intoChina, Southeast Asia, Borneo and the Philippines to the Sunda Islands. Currently thefamily includes 142 species have been grouped into two subfamilies, Megophryinaeand Leptobrachiinae. The mountains of central and southern China are rich in speciesof Megophryidae, 75 species belong to 9 genera and two subfamilies.The family was supposed to be ideal materials of studies in many fields of biology,such as taxonomy, evolution, systematics, ecology, and biogeography. Recently, therehave a great development in taxonomy and systematics of megophryids throughstudied by morphology, paleontology, cytology, ecology, and cladistics. However,larvae of megophryids were generally unknown, although the tadpoles might be veryimportant for above studies.In this paper, we examined the evolutionary scenario of the tadpoles’ morphologyin the context of a phylogenetic framework. Our objectives are (1) to evaluate thedivergence of larval body shape and oral discs in the family Megophryidae, (2) toexplore the evolutionary trends of the larvae in megophryidae, and test if thefunnel-shaped oral disc is apomorphic, and (3) to explore the relationship of the larvalstructure, diet and microhabitat.We examined larval morphology of 30 megophryid species, the larval body shape,oral discs, the buccopharyngeal cavity, and jaw sheaths and denticles of the Chinesemegophryid frogs were re-examined. We constructed a phylogeny of the species on thebasis of published mitochondrial cytochrome b and 16S rRNA gene segments usingpartitioned Bayesian analyses. Furthermore, hypothetical changes of larval morphologywere inferred using parsimony principle on the phylogeny. The results showed that:1) Four tadpole types in Megophryidae. The larval morphological charactersseries in Chinese megophryids fall into four general categories according to the bodyshape and oral discs: (A) Leptobrachiini type, species from genera Leptobrachium,Oreolalax, Scutiger and, Vibrissaphora share this type of tadpoles. (B) Leptolalax type,species of genus Leptolalax have this type of tadpoles. (C) Brachytarsophrys type,species of the genus Brachytarsophrys have this type of tadpoles. (D) Megophryinitype, species of the genera Atympanophrys, Ophryophryne, and Xenophrys share this type of tadpoles. Of which B and C are two novel types.2）Taxonomic implications. The present study leads us to reconsider the generalclassification of tribes attributed to members of Megophryidae. More specifically,concerning the phylogenetic relationships and the two novel tadpole types describedherein, we propose a provisional taxonomy for the family but suggest that further taxasampling of other megophryids be performed to confirm this taxonomic change. TheMegophryidae is composed of two subfamilies (Leptobrachiinae and Megophryinae).The Leptobrachiinae was recogonized the two tribes: (1) tribe Leptobrachiini sensuDubois, corresponding to the tadpole of type A, including four genera, i.e.,Leptobrachium, Oreolalax, Scutiger and, Vibrissaphora; (2) tribe Leptolalaxini,corresponding to the tadpole of novel type B, including two genera, i.e., Leptolalaxand Leptobrachella. However, the relationships among the genera of Megophryinaewere largely unresolved, they recognized no monophyletic groups above the generalevel. A more thorough sampling will likely foster a better taxonomic solution.3) The larval evolutionary scenario in Megophryidae.Type A is characteristicof normal-mouthed with multiple tooth rows, representing the tadpole type of theMRCA of Chinese megophryids. Type B is characteristic of normal-mouthed withreduced tooth rows, prolonging labium, and integumetary glands. Type C ischaracteristic of no labial teeth and smaller umbeliform oral disc. Type D ischaracteristic of no labial teeth, enlarged umbeliform oral disc, representing the tadpoleof the MRCA of subfamily Megophryinae. A previous hypothesis, referring tofunnel-shaped oral discs as an apomorphy, is supported.4) The larval adaptation to habitats in Megophryidae. Tadpoles generallyadhere to substrates using their mouths, and the microhabitat that the tadpoles occupyreflects the degree of adhesion and oral complexity. The morphological changes inmegophryid tadpoles virtually allow a progressive adaptation to a changing habitatfrom faster water to slower water. Within the tadpoles of Type A to type D, the TOTbecomes smaller and smaller, and the oral disc orientates from anteroventral toumbelliform upturned, and eye position orientates from dorsal to lateral, and the trunkis more and more depressed and tail becomes relatively longer and slender. Within therunning water, the normal-mouthed with multiple tooth rows of Leptobrachiini tadpoles are correlated with lotic-suctorial, benthic feeders with anteroventral oraldisc and the largest body. With the water’s velocity decreasing, the lotic-adherentfeeders of Leptolalax tadpoles have tube-shaped labium with reduced tooth rows andintegumetary glands. And then, the smaller umbeliform in Brachytarsophrys tadpolesand the enlarged umbeliform oral disc in the Megophryini tadpoles are inhabitmicrohabitats of non-flowing backwaters of rivers, indicative of adaptive traits oflotic-neustonic surface feeders. The scheme of megophryid tadpoles andmicrohabitats provided the first clear evidence which congruent with the hypothesis ofAltig and Johnston (1989). The ecological divergence plays a general role in thedivergence and evolution of megophrid larvae. There is a definite correlation amongthe buccopharyngeal cavity, diet and feeding mechanisms, the tadpole graze orswallow the food particles, then through papillae which like a sieve and sort out foodparticles to the oesophagus. The tadpole of Leptobrachiinae possess multiple toothrows, wide intertooth distance as well as thick and sparse jaw sheath, these tadpolesinhabit bottom of the streams and graze on epiphyton or major detritus of organicmatter on the substrates, their prelingual papillae like single finger, the mechanicalpurpose of papillae served share in by tooth and jaw. The tadpoles of Megophryinaeoccur near the water surface of small streams and are the filter feeder, their dietincludes plankton and organic debris floating on the water surface, those tadpolepossess weak jaw, their prelingual papillae like spoon, the mechanical purpose ofpapillae served mostly for sieve.