Numerical study on the velocity structure around tidal fronts in the Yellow Sea

The velocity components across tidal fronts are examined using the Blumberg and Mellor 3-D nonlinear numerical coastal circulation model incorporated with the Mellor and Yamada level 2.5 turbulent closure model based on the reasonable model output of the M-2 tide and density residual currents. In the numerical experiments, upwelling motion appears around all the fronts with different velocity structures, accounting for surface cold water around the fronts. The experiments also suggest that the location and formation of fronts are closely related to topography and tidal mixing, as is the velocity structure around the front.

Tidally induced upwelling off Yangtze River estuary and in Zhejiang coastal waters in summer

MASNUM wave-tide-circulation coupled numerical model (MASNUM coupled model, hereinafter) is developed based on the Princeton Ocean Model (POM). Both POM and MASNUM coupled model are applied in the numerical simulation of the upwelling off Yangtze River estuary and in Zhejiang coastal waters in summer. The upwelling mechanisms are analyzed from the viewpoint of tide, and a new mechanism is proposed. The study suggests that the tidally inducing mechanism of the upwelling includes two dynamic aspects: the barotropic and the baroclinic process. On the one hand, the residual currents induced by barotropic tides converge near the seabed, and upwelling is generated to maintain mass conservation. The climbing of the residual currents along the sea bottom slope also contributes to the upwelling. On the other hand, tidal mixing plays a very important role in inducing the upwelling in the baroclinic sea circumstances. Strong tidal mixing leads to conspicuous front in the coastal waters. The considerable horizontal density gradient across the front elicits a secondary circulation clinging to the tidal front, and the upwelling branch appears near the frontal zone. Numerical experiments are designed to determine the importance of tide in inducing the upwelling. The results indicate that tide is a key and dominant inducement of the upwelling. Experiments also show that coupling calculation of the four main tidal constituents(M-2, S-2, K-1, and O-1), rather than dealing with the single M-2 constituent, improves the modeling precision of the barotropic tide-induced upwelling.

胶州湾及其邻近海域的浮游植物－种类组成与数量变化

研究胶州湾浮游植物的物种组成与时空分布的特点，对于了解该湾生态系统的现状与历史变化趋势以及生态系统对自然条件变化和人类干扰的响应具有重要意义。 本文根据2004年每月一次采集的浮游植物样品，分析了胶州湾浮游植物的物种组成和优势种的时空分布情况。调查发现浮游植物共142种，分属于6门53属，其中硅藻门40属113种，占总物种数的79.6%；甲藻门10属24种，占总物种数的16.9%；其它为金藻门1属2种，裸藻1属1种，绿藻1属2种。浮游植物丰度周年波动范围为11.12－14602.39×104cells/m3，全年平均为1857.55×104cells/m3。全年丰度最高的藻为环纹劳德藻(Lauderia annulata)，出现在2月份，而全年的丰度最高值也出现在2月份。在胶州湾中，硅藻所占比例最大，平均为97.44%，最高为99.95%，最低为82.55%。浮游植物的丰度的周年变化：有两个高峰，分别出现在2月份和10月份，是典型的温带海域双高峰的分布形式。 胶州湾浮游植物的优势种分析，采用Kikvidze等（2002）提出的确定优势种数量的计算方法，再依据各物种的优势度排序最终确定优势种。其中在多样性最低的6月和10月，优势种数目均为1种，分别为丹麦细柱藻（Leptocylindrus danicus）和中肋骨条藻（Skeletonema costatum）。而在多样性指数较低的1月、2月，优势种数目分别为2和3；而在物种多样性比较高的5月、7月、11月，由于分布相对比较分散，所以优势种数量较多。这说明这个方法可以较好地完成对胶州湾浮游植物群落分析时确定优势种的目标。优势种出现频率较多的种类为中肋骨条藻（1、3、4、5、8、10、11、12月）、洛氏角毛藻(Chaetoceros lorenzianus)（7、8、9、11、12月）、尖刺拟菱形藻(Pseudonitzschia pungens)（2、3、5、7月）、加拉星杆藻(Asteronella kariana)（1、2、3、5月）、密联角毛藻(Chaetoceros densus)（5、11、12月）、扭鞘藻(Streptothece thamesis)（7、8、9月）、夜光藻(Noctiluca scintillancs)（4、5、7月）、奇异菱形藻(Nitzschia paradoxa)（5、11、12月）,对这些种的时空分布进行了分析。 对2004年胶州湾的浮游植物数据进行分层聚类分析后，发现可以将胶州湾划分为三个海区：湾南与湾外海区、湾中西部海区、湾东海区。

中国近海和西北太平洋温跃层时空变化分析、模拟及预报

温度跃层是反映海洋温度场的重要物理特性指标，对水下通讯、潜艇活动及渔业养殖、捕捞等有重要影响。本文利用中国科学院海洋研究所“中国海洋科学数据库”在中国近海及西北太平洋（110ºE-140ºE,10ºN-40ºN）的多年历史资料（1930-2002年，510143站次），基于一种改进的温跃层判定方法，分析了该海域温跃层特征量的时空分布状况。同时利用Princeton Ocean Model(POM)，对中国近海，特别是东南沿海的水文结构进行了模拟，研究了海洋水文环境对逆温跃层的影响。最后根据历史海温观测资料，利用EOF分解统计技术，提出了一种适于我国近海及毗邻海域，基于现场有限层实测海温数据，快速重构海洋水温垂直结构的统计预报方法，以达到对现场温跃层的快速估计。 历史资料分析结果表明，受太阳辐射和风应力的影响，20°N以北研究海域，温跃层季节变化明显，夏季温跃层最浅、最强，冬季相反，温跃层厚度的相位明显滞后于其他变量，其在春季最薄、秋季最厚。12月份到翌年3月份，渤、黄及东海西岸，呈无跃层结构，西北太平洋部分海域从1月到3月份，也基本无跃层结构。在黄海西和东岸以及台湾海峡附近的浅滩海域，由于风力搅拌和潮混合作用，温跃层出现概率常年较低。夏季，海水层化现象在近海陆架海域得到了加强，陆架海域温跃层强度季节性变化幅度(0.31°C/m)明显大于深水区(约0.05°C/m)，而前者温跃层深度和厚度的季节性变化幅度小于后者。20°N以南研究海域，温跃层季节变化不明显。逆温跃层主要出现在冬、春季节（10月-翌年5月）。受长江冲淡水和台湾暖流的影响，东南沿海区域逆温跃层持续时间最长，出现概率最大，而在山东半岛北及东沿岸、朝鲜半岛西及北岸，逆温跃层消长过程似乎和黄海暖流有关。多温跃层结构常年出现于北赤道流及对马暖流区。在黑潮入侵黄、东、南海的区域，多温跃层呈现明显不同的季节变化。在黄海中部，春季多温跃层发生概率高于夏季和秋季，在东海西部，多跃层主要出现在夏季，在南海北部，冬季和春季多温跃层发生概率大于夏季和秋季。这些变化可能主要受海表面温度变化和风力驱动的表层流的影响。 利用Princeton Ocean Model(POM)，对中国东南沿海逆温跃层结构进行了模拟，模拟结果显示，长江冲淡水的季节性变化以及夏季转向与实际结果符合较好，基本再现了渤、黄、东海海域主要的环流、温盐场以及逆温跃层的分布特征和季节变化。通过数值实验发现，若无长江、黄河淡水输入，则在整个研究海域基本无逆温跃层出现，因此陆源淡水可能是河口附近逆温跃层出现的基本因素之一。长江以及暖流（黑潮和台湾暖流）流量的增加，均可在不同程度上使逆温跃层出现概率及强度、深度和厚度增加，且暖流的影响更加明显。长江对东南沿海逆温跃层的出现，特别是秋季到冬季初期，有明显的影响，使长江口海域逆温跃层位置偏向东南。暖流对于中国东南沿海的逆温跃层结构，特别是初春时期，有较大影响，使长江口海域的逆温跃层位置向东北偏移。 通过对温跃层长期变化分析得出，黄海冷水团区域，夏季温跃层强度存在3.8年左右的年际变化及18.9年左右的年代际变化，此变化可能主要表现为对当年夏季和前冬东亚地区大气气温的热力响应。东海冷涡区域，夏季温跃层强度存在3.7年的年际变化，在El Nino年为正的强度异常，其可能主要受局地气旋式大气环流变异所影响。谱分析同时表明，该海域夏季温跃层强度还存在33.2年的年代际变化，上世纪70年代中期，温跃层强度由弱转强，而此变化可能与黑潮流量的年代际变化有关。 海洋水温垂直结构的统计预报结果显示，EOF分解的前四个主分量即能够解释原空间点温度距平总方差的95%以上，以海洋表层附近观测资料求解的特征系数推断温度垂直结构分布的结果最稳定。利用东海陆架区、南海深水区和台湾周边海域三个不同区域的实测CTD样本廓线资料，对重构模型的检验结果表明，重构与实测廓线的相关程度超过95%的置信水平。三个区重构与实测温度廓线值的平均误差分别为0.69℃，0.52℃，1.18℃，平均重构廓线误差小于平均气候偏差，统计模式可以很好的估算温度廓线垂直结构。东海陆架海区温度垂直重构廓线与CTD观测廓线获得的温跃层结果对比表明，重构温跃层上界、下界深度和强度的平均绝对误差分别为1.51m、1.36m和0.17℃/m，它们的平均相对误差分别为24.7%、8.9%和22.6%，虽然温跃层深度和强度的平均相对误差较大，但其绝对误差量值较小。而在南海海区，模型重构温跃层上界、下界和强度的平均绝对预报误差分别为4.1m、27.7m和0.007℃/m，它们的平均相对误差分别为16.1%、16.8%和9.5%，重构温跃层各特征值的平均相对误差都在20%以内。虽然南海区温跃层下界深度平均绝对预报误差较大，但相对于温跃层下界深度的空间尺度变化而言（平均温跃层下界深度为168m），平均相对误差仅为16.8%。因此说模型重构的温度廓线可以达到对我国陆架海域、深水区温跃层的较好估算。 基于对历史水文温度廓线观测资料的分析及自主温跃层统计预报模型，研制了实时可利用微机简单、快捷地进行温跃层估算及查询的可视化系统，这是迄今进行大范围海域温跃层统计与实时预报研究的较系统成果。

Annual cycle of stratification and tidal fronts in the Bohai Sea: A model study

In general, competition between buoyancy mechanisms and mixing dynamics largely determines the water column structure in a shelf sea. A three dimensional baroclinic ocean model forced by surface heat fluxes and the 2.5 order Mellor-Yamada turbulence scheme is used to simulate the annual cycle of the temperature in the Bohai Sea. The difference between the sea surface temperature (SST) and sea bottom temperature (SBT) is used to examine the evolution of its vertical stratification. It is found that the water column is well-mixed from October to March and that the seasonal thermocline appears in April, peaks in July and then weakens afterwards, closely following the heat budget. In addition, the Loder parameter based on the topography and tidal current amplitude is also computed in order to examine tidal fronts in the BS, which are evident in summer months when the wind stirring mechanism is weak.

Electro-Osmotic Flow and Mixing in Heterogeneous Microchannels

Analytical and numerical studies of secondary electro-osmotic flow EOF and its mixing in microchannels with heterogeneous zeta potentials are carried out in the present work. The secondary EOFs are analyzed by solving the Stokes equation with heterogeneous slip velocity boundary conditions. The analytical results obtained are compared with the direct numerical simulation of the Navier-Stokes equations. The secondary EOFs could transport scalar in larger areas and increase the scalar gradients, which significantly improve the mixing rate of scalars. It is shown that the heterogeneous zeta potentials could generate complex flow patterns and be used to enhance scalar mixing.

Mixing process in estuaries

A theoretical expression for vertical profile-of horizontal velocity in terms of its depth-average is derived based on oscillatory boundary layer theory and estuarine flow characteristics. The derived theoretical profile is then incorporated into a vertical quasi-two-dimensional model, which is proved advantageous in more physical implications and less CPU time demand. To validate the proposed model, the calculated results are compared to the field data in the Yangtze River Estuary, exhibiting good agreement with observations. The proposed quasi-two-dimensional vertical model is used to study mixing process, especially dependence of salinity distribution and salt front strength on runoff and tides in estuaries.

Direct numerical simulation of transition and turbulence in compressible mixing layer

The three-dimensional compressible Navier-Stokes equations are approximated by a fifth order upwind compact and a sixth order symmetrical compact difference relations combined with three-stage Ronge-Kutta method. The computed results are presented for convective Mach number Mc = 0.8 and Re = 200 with initial data which have equal and opposite oblique waves. From the computed results we can see the variation of coherent structures with time integration and full process of instability, formation of Lambda-vortices, double horseshoe vortices and mushroom structures. The large structures break into small and smaller vortex structures. Finally, the movement of small structure becomes dominant, and flow field turns into turbulence. It is noted that production of small vortex structures is combined with turning of symmetrical structures to unsymmetrical ones. It is shown in the present computation that the flow field turns into turbulence directly from initial instability and there is not vortex pairing in process of transition. It means that for large convective Mach number the transition mechanism for compressible mixing layer differs from that in incompressible mixing layer.

The Experimental Study of Injection and Mixing of the Model Ejector Rocket

专门设计了可用于研究箭基组合循环发动机(RBCC)在起动阶段(Ma=0)所使用的引射火箭性能的实验装置.作为初步试验,研究了不同工况的引射热喷流(一次流)和被引射空气(二次流)之间混合的演变、发展过程,找出不同来流条件下影响引射性能的主要参数,为最终探明引射火箭的最佳工作条件打下基础,同时根据试验结果提出了促进一、二次流混合的可行方案,便于下一步深入研究.

Behaviour analysis of numerical solutions and simulation of coherent structures in compressible mixing layers

For understanding the correctness of simulations the behaviour of numerical solutions is analysed, Tn order to improve the accuracy of solutions three methods are presented. The method with GVC (group velocity control) is used to simulate coherent structures in compressible mixing layers. The effect of initial conditions for the mixing layer with convective Mach number 0.8 on coherent structures is discussed. For the given initial conditions two types of coherent structures in the mixing layer are obtained.

Numerical simulation of coherent structure in two-dimensional compressible mixing layers

The coherent structure in two-dimensional mixing layers is simulated numerically with the compressible Navier-Stokes equations. The Navier-Stokes equations are discretized with high-order accurate upwind compact schemes. The process of development of flow structure is presented: loss of stability, development of Kelvin-Helmholtz instability, rolling up and pairing. The time and space development of the plane mixing layer and influence of the compressibility are investigated.

Numerical Investigation On The Flowfield Of "Swallowtail" Cavity For Supersonic Mixing Enhancement

A "swallowtail" cavity for the supersonic combustor was proposed to serve as an efficient flame holder for scramjets by enhancing the mass exchange between the cavity and the main flow. A numerical study on the "swallowtail" cavity was conducted by solving the three-dimensional Reynolds-averaged Navier-Stokes equations implemented with a k-epsilon turbulence model in a multi-block mesh. Turbulence model and numerical algorithms were validated first, and then test cases were calculated to investigate into the mechanism of cavity flows. Numerical results demonstrated that the certain mass in the supersonic main flow was sucked into the cavity and moved spirally toward the combustor walls. After that, the flow went out of the cavity at its lateral end, and finally was efficiently mixed with the main flow. The comparison between the "swallowtail" cavity and the conventional one showed that the mass exchanged between the cavity and the main flow was enhanced by the lateral flow that was induced due to the pressure gradient inside the cavity and was driven by the three-dimensional vortex ring generated from the "swallowtail" cavity structure.

Enhancement of ultrafast four-wave mixing in a polar molecule medium

We investigate the ultrafast four-wave mixing (FWM) with two-color few-cycle ultrashort pulses propagating in a two-level polar molecule medium. It is found that the enhancement of FWM can be achieved even for low intensity pulses due to the effects of permanent dipole moments (PDM) in polar molecules. Moreover, the conversion efficiency of FWM can be controlled by the carrier-envelope phases (CEP) of two ultrashort pulses. (c) 2006 Optical Society of America

Enhancement of four-wave mixing induced by interacting dark resonances

We analyse a four-wave mixing (FWM) scheme in a five-level atomic system in which double-dark resonances are present. It is found that the enhancement of FWM in both electromagnetically induced transparency (EIT) windows can be obtained even without the condition of multiphoton resonance. Moreover, the conversion efficiency of FWM in one EIT window can be much larger than that in the other due to the presence of interacting dark resonances.

High efficiency four-wave mixing induced by double-dark resonances in a five-level tripod system

A five-level tripod scheme is proposed for obtaining a high efficiency four-wave-mixing (FWM) process. The existence of double-dark resonances leads to a strong modification of the absorption and dispersion properties against a pump wave at two transparency windows. We show that both of them can be used to open the four-wave mixing channel and produce efficient mixing waves. In particular, higher FWM efficiency is always produced at the transparent window corresponding to the relatively weak-coupling field. By manipulating the intensity of the two coupling fields, the conversion efficiency of FWM can be controlled.