Analysis of sulfur-containing compounds in crude oils by comprehensive two-dimensional gas chromatography with sulfur chemiluminescence detection

This paper reports an analytical method for separating, identifying, and quantifying sulfur-containing compounds in crude oil fraction (IBP-360degreesC) samples based on comprehensive two-dimensional gas chromatography coupled with a sulfur chemiluminescence detector. Various sulfur-containing compounds and their groups were analyzed with one direct injection. 3620 peaks were detected including 1722 thiols/thioethers/ disulfides/1-ring thiophenes, 953 benzothiophenes, 704 dibenzothiophenes, and 241 benzonaphthothiophenes. The target sulfur compounds and their groups were identified based on the group separation feature and structured retention of comprehensive two-dimensional gas chromatography as well as standard substances. The quantitative analysis of major sulfur-containing compounds and total sulfur was based on the linear response of the sulfur chemiluminescence detector using the internal standard method. The sulfur contents of target sulfur compounds and their groups in 4 crude oil fractions were also determined. The recoveries for standard sulfur-containing compounds were in the range of 90-102%. The quantitative result of total sulfur in the Oman crude oil fraction sample was compared with those from ASTM D 4294 standard method (total S by X-ray fluorescence spectrometry), the relative deviation (RD%) was 4.2% and the precision of the method satisfactory.

Determination of sulfur-containing compounds in diesel oils by comprehensive two-dimensional gas chromatography with a sulfur chemiluminescence detector

This article reports an analytical method for separating, identifying and quantitating sulfur-containing compounds and their groups in diesel oils (170-400degreesC) using comprehensive two-dimensional gas chromatography coupled with a sulfur chemiluminescence detector. The identification of target compounds and their groups was based on standard substances, the group separation feature and the-effect of comprehensive two-dimensional gas chromatography. The quantitative analysis on major sulfur compounds and total sulfur was carried out based on the linear response of sulfur chemiluminescence detector and the internal standards method. The results of total sulfur determination in the samples were compared with those from ASTM D 4294 standard method, the R.S.D. percentage were <6.02%, correctness of this method can meet the industrial requirement. To the end, the method developed was used to investigate the sulfur-containing compounds in different diesel oils, the result shows that the distribution of sulfur-containing compounds in diesel oils from different process units are apparently different. The sulfur compounds in fluid catalytic cracking (FCC), residuum fluid catalytic cracking (RFCC) diesel oils mainly exist in the form of alkyl-substituted dibenzothiophenes that add up to about 40-50% of the total sulfur, while this number is only 6-8 and 20-28% in visbreaking (VB) and delayed-coking (DC) diesel oils, respectively. (C) 2003 Elsevier B.V. All rights reserved.

Synthesis of novel nitrogen- and sulfur-containing conjugated polymers used as hole-transporting materials for organic light-emitting diodes

Two series of highly soluble novel nitrogen- and sulfur-containing conjugated polymers were synthesized via an acid-induced self-polycondensation of functional monomers with methyl sulfinyl and aromatic groups. The well-defined structures of synthesized polymers were confirmed by their NMR and IR spectra. The highest occupied molecular orbital energy values for these materials, estimated by cyclic voltammetry, showed a broad range of values from about 5.0 to 5.2 eV used as hole-transport layers (HTL) in two-layer light-emitting diodes ITO/HTL/Alq(3)/Mg:Ag [ITO = indium tin oxide, and Alq(3) = tris(8-quinolinato) aluminum]. The typical turn-on voltage of these diodes was about 4-5 V. The maximum brightness of the device was about 3440 cd/m(2) at 20 V. The maximum efficiency was estimated to be 0.15 1m/W at 10 V.

Design, synthesis and characterization of novel nitrogen-and sulfur-containing polymers with well-defined conjugated length

A series of novel nitrogen- and sulfur-containing conjugated polymers with well-defined conjugation length have been synthesized via an acid-induced self-polycondensation of functional monomers with methylsulfinyl groups. Synthesized polymers exhibit good solubility in common solvents, such as CHCl3, THF, DMF, DMSO, and NMP. With increased numbers of aminophenyl groups, these polymers have shown similar electrical properties to polyaniline (PAn), and these are demonstrated by UV-vis spectroscopy and cyclic voltammetry (CV) measurements on the polymers. The conductivity of preliminarily protonic-doped poly[phenylene sulfide-alt-tetrakis(aniline)] (PPSTEA) is up to 10(-1) S cm(-1).

Nitrogen- and sulfur-containing conjugated polymers as the hole-transporting materials

A series of novel nitrogen- and sulfur-containing conjugated polymers have been synthesized via an acid-induced self polycondensation of functional monomers with methyl sulfinyl group. They exhibit good solubility in common solvents, such as CHCl3, THF, DMF, DMSO, et al; and thus show excellent film-forming properties. They are used as hole-transport layer (HTL) in two-layer light-emitting diodes (ITO/polymer/Alq3/Mg:Ag). The typical turn-on voltage of these diodes is about 4 similar to 5V. The maximum brightness is about 3440cd/m(2) at 20 V. The maximum efficiency is estimated to be 0.15 Im/W at 10V.

Self-assembled monolayer of polyoxometalate on gold surfaces: Quartz crystal microbalance, electrochemistry, and in-situ scanning tunneling microscopy study

A new kind of inorganic self-assembled monolayer (SAM) was prepared by spontaneous adsorption of polyoxometalate anion, AsMo11VO404-, onto a gold surface from acidic aqueous solution. The adsorption process, structure, and electrochemical properties of the AsMo11VO404- SAM were investigated by quartz crystal microbalance (QCM), electrochemistry, and scanning tunneling microscopy (STM). The QCM data suggested that the self-assembling process could be described in terms of the Langmuir adsorption model, providing the value of the free energy of adsorption at -20 KJ mol(-1). The maximum surface coverage of the AsMo11VO404- SAM on gold surface was determined from the QCM data to be 1.7 x 10(-10) mol cm(-2), corresponding to a close-packed monolayer of AsMo11VO404- anion. The analysis of the voltammograms of the AsMo11VO404- SAM on gold electrode showed three pairs of reversible peaks with an equal surface coverage of 1.78 x 10(-10) mol cm(-2) for each of the peaks, and the value was agreed well with the QCM data. In-situ STM image demonstrated that the AsMo11VO404- SAM was very uniform and no aggregates or multilayer could be observed. Furthermore, the high-resolution STM images revealed that the AsMo11VO404- SAM on Au(lll) surface was composed of square unit cells with a lattice space of 10-11 Angstrom at +0.7 V (vs Ag\AgCl). The value was quite close to the diameter of AsMo11VO404- anion obtained from X-ray crystallographic study. The surface coverage of the AsMo11VO404- SAM on gold electrode estimated from the STM image was around 1.8 x 10(-10) mol cm(-2), which was consistent with the QCM and electrochemical results.

Selective oxidations on recoverable catalysts assembled in emulsions

Catalysts assembled in emulsions are found to be potentially recoverable and efficient for a number of catalytic reactions. The catalysts composed of polyoxometalate anions and quaternary ammonium cations have been designed and synthesized according to the catalytic reactions and by optimizing the structures of cations and anions. The catalysts act essentially as surfactants, which are uniformly distributed in the interface of the emulsion droplets, and accordingly behave like homogeneous catalysts. The catalysts show remarkable selectivity and activity in the oxidation of sulfur-containing molecules to sulfones in diesel and the selective oxidation of alcohols to ketones, using H2O2 as oxidant. For an example, the catalyst demonstrated over 96% efficiency of H2O2 and similar to 100% selectivity to sulfones for the selective oxidation of sulfur-containing molecules in real diesel. Moreover, the catalysts can be separated and recycled by a simple demulsification and re-emulsification.

In situ IR spectroscopic studies on molybdenum nitride catalysts: active sites and surface reactions

Recent IR spectroscopic studies on the surface properties of fresh Mo2N/gamma-Al2O3 catalyst are presented in this paper. The surface sites of fresh Mo2N/gamma-Al2O3, both Modelta+ (0<δ<2) and N sites, are probed by CO adsorption. Two characteristic IR bands were observed at 2045 and 2200 cm(-1), due to linearly adsorbed CO on Mo and N sites, respectively. The surface N sites are highly reactive and can react with adsorbed CO to form NCO species. Unlike adsorbed CO on reduced passivated one, the adsorbed CO on fresh Mo2N/gamma-Al2O3 behaves similarly to that of group VIII metals, suggesting that fresh nitride resembles noble metals. It is found that the surface of Mo nitrides slowly transformed into sulfide under hydrotreating conditions, which could be the main reason for the activity drop of molybdenum nitride catalysts in the presence of sulfur-containing species. Some surface reactions, such as selective hydrogenation of 1,3-butadiene, isomerization of 1-butene, and hydrodesulfurization of thiophene, were studied on both fresh and reduced passivated Mo2N/gammaAl(2)O(3) catalysts using IR spectroscopy. The mechanisms of these reactions are proposed. The adsorption and reaction behaviors of these molecules on fresh molybdenum nitride also resemble those on noble metals, manifesting the unique properties of fresh molybdenum nitride catalysts. Mo and N sites are found to play different roles in the adsorption and catalytic reactions on the fresh Mo2N/gammaAl(2)O(3) catalyst. Generally, Mo sites are the main active sites for the adsorption and reactions of adsorbates; N sites are not directly involved in catalytic reactions but they modify the electronic properties of Mo sites.

Halichondria sulfonic acid, a new HIV-1 inhibitory guanidino-sulflonic acid, and halistanol sulfate isolated from the marine sponge Halichondria rugosa Ridley & Dendy

A new sulfur-containing guanidino derivative, halichondria sulfonic acid (1) showing anti-HIV-1 activity, and halistanol trisulfate (2) with anti-tumor activity have been isolated from the marine sponge Halichondria rugosa Ridley & Dendy collected in the

傅立叶变换离子回旋共振质谱在含糖小分子分析中的应用

傅立叶变换离子回旋共振质谱是一种近些年来逐渐发展起来的新型质谱仪器，由于该类质谱检测器的设计和检测原理与传统质谱有着根本的区别，通过它获取的数据具有高分辨和高质量测量精度的特点。通常，超过100000以上的分辨本领能够对质谱中非常临近的质谱峰进行区分，并结合串联质谱中的高质谱测量精度数据，可以给出明确的串联质谱碎裂途径。 本论文选择4对具有同分异构特点的二糖黄酮进行了系统研究，实验采取负离子模式的电喷雾傅立叶变换离子回旋共振质谱，结合持续非共振辐照碰撞诱导解离模式，对同分异构体的区分进行了研究。在实验过程中，建立了一种全新的质量校正方法，使得质谱测量平均误差小于1.00 ppm1。首次直接利用子离子的结构信息，确定了负离子模式下二糖黄酮的去质子化位点。实验中还发现，RDA解离途径仅仅当二糖黄酮的苷元是黄烷酮并且B环上没有过多的富电子基团的情况下才能发生，同时，具有α1→2糖连接的二糖黄酮在串联质谱中能够发生多键解离，并采用Gaussian 03 程序利用 B3LYP/6-31G方法对其进行了理论计算。为了进一步讨论α1→2糖连接二糖黄酮的串联质谱特点，在温和实验条件下，对上述化合物进行了氢氘交换实验。实验中首次发现温和条件下，黄酮的氢氘交换位点依赖于苷元结构，除了糖链上羟基和苷元上的酚羟基能够发生氢氘交换外，苷元为黄烷酮的二糖黄酮中，C（3）、C（6）和C（8）上的氢能够被直接交换掉，而苷元为黄酮骨架的二糖黄酮则在此位点不发生氢氘交换反应，并依据高质量测量精度数据对其子离子产生途径进行研究。 论文还系统研究了由葡萄糖缩合而成的二糖，4对二糖异构体负离子模式电喷雾傅立叶变换离子回旋共振质谱研究表明，其离子化过程中，生成的去质子化的二聚体是主要气相离子，依据单糖的实验和计算化学结果，论文中提出二糖化合物的离子化模型。计算化学的结果还证实，构成二聚体的单体直接具有强烈的相互作用，能够在串联质谱中产生共价键解离的子离子，而不是简单的单体解离。利用SORI CID还对二糖化合物的糖连接位点和糖苷键构型进行了区分研究。 论文的最后一部分研究了人工合成类肝素类化合物DHα、THα 和 THβ的结构表征，在极其温和的负离子模式电喷雾质谱条件下，类肝素化合物仍然容易发生多个SO3中性丢失。串联质谱中的子离子通过傅立叶变换离子回旋共振质谱高质量精度测量数据进行了确认。实验对研究类肝素类化合物的质谱表征提供了借鉴。

西藏胡黄连和鸡矢藤的化学成分及黄芪多糖的提取工艺研究

本论文由四部分组成，前三部分为实验论文，第四部分为文献综述。第一、二部分分别报道了中药西藏胡黄连和鸡矢藤的化学成分研究结果。从两种药用植物中共分离和鉴定了32个化学成分，其中3个为新化合物。第三部分为黄芪多糖的提取工艺研究。第四部分概述了近年来植物多糖的研究进展。 第一章为西藏胡黄连化学成分研究。通过正、反相硅胶柱层析等分离方法从药用植物西藏胡黄连（Picrorhiza scrophulariiflora Pennell）的根茎中共分离纯化出7个化合物。运用MS、1H-NMR、13C-NMR、DEPT、HSQC和HMBC等现代谱学方法，结合理化分析对这些化合物的结构进行了分析鉴定。7个化合物中有两个是酚性的葡萄糖苷类成分：西藏胡黄连酚苷D (1)、4-O-β-D-(6-O-vanilloyl glucopyranosyl) vanillic acid (6)；四个苯乙基苷类化合物：plantamajoside (2)、plantainoside D (3)、西藏胡黄连苷A (4) 和西藏胡黄连苷F (5)；一个苯基小分子化合物：香豆酸甲酯 (7)。其中化合物1和5未见文献报道，确定为新化合物；化合物3为首次从该种植物中分到。 第二章为鸡矢藤化学成分研究。从鸡矢藤（Paederia scandense (Lour) Merrill）全草中分离出25个化合物，通过理化常数和波谱数据鉴定了它们的结构。25个化合物中包括一个蒽醌类成分：茜根定-1-甲醚 (1)；两个香豆素：异东莨菪香豆素 (2)和5-羟基-8-甲氧基吡喃香豆素 (3)；两个香豆素-木脂素化合物：臭矢菜素 B (4)和臭矢菜素 D (5)；一个木脂素：异落叶松树脂醇 (6)；两个黄酮：diadzein (7)和蒙花苷 (8)；三个三萜类化合物：齐墩果酸 (9)、乌苏酸 (10)和 3-O-β-D-吡喃葡萄糖基乌苏烷 (11)；三个甾体及其糖苷：b-谷甾醇 (12)、胡萝卜苷 (13)和(24R)-豆甾-4-烯-3-酮 (14)；六个小分子化合物：对羟基苯甲酸 (15)，咖啡酸 (16)，香豆酸 (17)，丁烯二酸 (18)，3,5-二甲氧基-4-羟基苯甲酸(19)，咖啡酸-4-O-β-D-吡喃葡萄糖苷(20)；五个环烯醚萜类化合物：鸡矢藤苷 (21)，鸡矢藤酸 (22)，鸡矢藤酸甲酯 (23)，saprosmoside E (24)和paederoside B (25)。其中化合物25未见文献报道，为新化合物。化合物1～8、11、14、15～20为首次从该化合物中分离得到。同时对鸡矢藤中环烯醚萜类化合物做了高效液相-串联质谱(HPLC-MSn)分析，探讨了这类化合物的质谱裂解规律。 第三章为黄芪多糖的提取工艺研究。首先确定了黄芪多糖含量的测定方法，并进行了方法学验证；其次探讨了黄芪中黄芪多糖的提取工艺，确定以酶法-Sevag法联用来去除黄芪多糖中的蛋白质，可使其提取物中黄芪多糖总含量达到70％以上。 第四章为近年来植物多糖的研究进展。主要包括植物多糖的提取纯化、多糖的定性定量检测方法、多糖的结构分析和多糖的药理活性。 This dissertation consists of four parts. The first and second parts reports the studies on the chemical constituents of medicinal plants of Picrorhiza Scrophulariiflora and Paederia scandens. The third part is about the extract technique of Astragalan Polysaccharide (APS). The last part reviews the progress of the studies on plant polysaccharides. 　 The first chapter is about the chemical constituents of P. Scrophulariiflora which is widely used as an important medicine to treat various immune-related diseases. A new phenyl glycoside, scrophenoside D (1) and a new phenylethyl glycoside, scroside F (5), together with five known compounds, plantamajoside (2), plantainoside D (3), scroside A (4), 4-O-β-D-(6-O-vanilloylglucopyranosyl) vanillic acid (6); and methyl-p-coumarate (7) were isolated from the stems of P. scrophulariiflora. Their structures were elucidated by spectroscopic and chemical methods. The second chapter is about the chemical constituents of medicinal herb of P. scandens. Twenty-five compounds were isolated and purified by normal and reversed phase silica gel column chromatography. By physicochemical properties and spectral analysis, their structures were identified as rubiadin-1-methylether (1), isoscopoletin (2), 5-hydroxyl-8-methoxyl-coumarin (3), cleomiscosin B (4), cleomiscosin D (5), isolariciresinol (6), diadzein (7), linarin (8), oleanolic acid (9), ursolic acid (10), 3-O-β-D-glucopyranosyloxyl-ursane (11), b-sitosterol (12), b-daucosterol (13), (24R)-stigmast-4-ene-3-one (14), p-hydroxyl-benzoic acid (15), caffic acid (16), coumaric acid (17), trans-butenedioic acid (18), 3,5-dimethoxyl-4-hydroxylbenzoic acid (19), caffeic acid 4-O-β-D-glucopyranoside (20), paederoside (21), paederosidic acid (22), paederosidic acid methyl ester (23), saprosmoside E (24), paederoside B (25). Among them, compound 25 is a new compound. Compounds 1～8、11、14、15～20 were isolated from this plant for the first time. Futhermore, we studied the HPLC-MSn analysis and investigation of fragmentation behavior of the sulfur-containing iridoid glucosides. The third chapter is about the extracting process of Astragalan Polysaccharide (APS). The method of the content determination is built. The optimum condition of extraction of polysaccharides from Radix Astragali is defined and the more effective way to remove protein is combined enzyme method with Sevag method, by which the content of polysaccharides extract can be up to 70%. The last part is a review of the research progress of the plant polysaccharides, which includes its extraction, isolation, purification, determination, structure analysis, and pharmacology.

One-step preparation and characterization of PDDA-protected gold nanoparticles

Poly(diallyl dimethylammonium) chloride (PDDA), an ordinary and watersoluble, cationic polyelectrolyte, was investigated for its ability to generate and stabilize gold colloids from a chloroauric acid precursor. In this reaction, PDDA acted as both reducing and stabilizing agents for gold nanoparticles (AuNPs). More importantly, PDDA is a quaternary ammonium polyelectrolyte, which shows that the scope of the reducing and stabilizing agents for metal nanoparticles can be extended from the amine-containing molecules to quaternary ammonium polyelectrolytes or salts. UV-vis spectroscopy, transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS) and Fourier transform infrared (FTIR) were used to characterize the synthetic AuNPs. The PDDA-protected AuNPs obtained are very stable and have relative narrow size distribution.