Characterization of a dissolved oxygen sensor made of plastic optical fiber coated with ruthenium-incorporated solgel

A dissolved oxygen sensor made of plastic optical fiber as the substrate and dichlorotris (1, 10-phenanthroline) ruthenium as a fluorescence indicator is studied. Oxygen quenching characteristics of both intensity and phase were measured; the obtained characteristics showed deviation from the linear relation described by the Stern-Volmer equation. A two-layer model is proposed to explain the deviation, and main parameters can be deduced with the model. (C) 2009 Optical Society of America

Optical fiber long-period grating with solgel coating for gas sensor

The novel long-period fiber grating (LPFG) film sensor is composed of the long-period grating coated with solgel-derived sensitive films. The characteristics of the transmissivity of the LPFG film sensor are studied. By analyzing the relation among the sensitivity S-n, the thin film optical parameters, and the fiber grating parameters, the optimal design parameters of the LPFG film sensor are obtained. Data simulation shows that the resolution of the refractive index of this LPFG film sensor is predicted to be 10(-8). Experimentally, a LPFG film sensor for detection Of C2H5OH was fabricated, and a preliminary gas-sensing test was performed. (c) 2006 Optical Society of America.

溶胶-凝胶法在平面光波导薄膜制备中的应用

溶胶-凝胶技术作为一种湿化学法具有工艺温度低、化学均匀性好、易实现材料的掺杂等独特的优点，平面光波导薄膜是制备其他各种波导和集成光学器件的基础。近年来，采用溶胶-凝胶技术制备平面光波导薄膜已成为研究热点。该文综述了溶胶-凝胶法在制备平面光波导薄膜中的应用及其发展趋势。

溶胶-凝胶法制备导电聚苯胺杂化材料

针对有机一无机杂化材料制备过程中致命的体积收缩问题，本论文相继选用一系列具有亲水性官能团的聚倍半硅氧化物类前驱体为基体，采用溶胶一凝胶方法，以区域限制方式把水溶性导电聚苯胺固定在三维无机网络内，获得了耐水型自支撑杂化导电膜，该自支撑膜呈现出一定的机械强度与耐磨性。同时，为了进一步增加有机、无机组分之间的作用力，获取分子级别杂化材料，本文尝试了在导电聚苯胺与无机网络之间引入共价键、离子键等较强相互作用，得到了一些有意义的结果，具体如下：（1）亲水性的倍半硅氧烷前驱体、桥联倍半硅氧烷前驱体均能与水溶性导电聚苯胺形成平整的自支撑膜，该导电膜呈现出较好的耐”水性。（2）通过一步掺杂法制备的化学键接型水溶性导电聚苯胺／无机杂化膜除显示出良好的耐水性外，其热稳定性也得到了提高，从而为耐热型导电杂化膜的开发提供了思路。（3）有机一无机组分间通过离子键接引入静电相互作用亦是提高体系相容性，获取耐水型自支撑杂化膜的另一有效的方法。但由于导电膜中含有大量的离子键，与上述两体系相比，机械强度显得稍脆。（4）带有长链状亲水基团的掺杂剂酸性磷酸酷具有很强的自组装能力，不仅能在杂化体系中指导聚苯胺纳米管的构筑，而且能通过聚合单体法直接生成大批量聚苯胺纳米管材料。

Removal of Cr(III, VI) by quaternary ammonium and quaternary phosphonium ionic liquids functionalized silica materials

A series of silica-based organic–inorganic hybrid materials were prepared by the sol–gel process for Cr(III) and Cr(VI) adsorption. These silica materials generally had high surface areas, good physical–chemical stability and high thermal stability. Trialkylmethylammonium bis 2,4,4-trimethylpentylphosphinate ([A336][C272]) and trihexyl(tetradecyl)phosphonium bis 2,4,4-trimethylpentylphosphinate (Cyphos IL 104) were explored as porogens to prepare porous silica and as extractants to extract chromium ions. Cyphos IL 104 and [A336][C272] functionalized silica sorbents (SG-2, SG-5) can be effectively used for the removal of Cr(III) and Cr(VI) from aqueous solutions by adjusting pH values, whereas trialkylmethylammonium chloride (Aliquat 336) and bis(2,4,4-trimethylpentyl)phosphinic acid (Cyanex 272) functionalized silica sorbents (SG-3, SG-4) can only be used for the removal of the single chromium species, Cr(VI) or Cr(III).

Water-resistant conducting hybrids from electrostatic interactions

Conductive hybrids were prepared in a water/ethanol solution via the Solgel process from an inorganic sol containing carboxyl groups and water-borne conductive polyaniline (cPANI). The inorganic sol was prepared by the hydrolysis and condensation of methyltriethoxysilane with the condensed product of maleic anhydride and aminopropyltriethoxysilane as a catalyst, for which the carboxyl counterion along the cPANI backbone acted as an electrostatic-interaction moiety. The existence of this electrostatic interaction could improve the compatibility of the two components and contribute to the homogeneous dispersion of cPANI in the silica phase. The electrostaticinteraction hybrids displayed a conductivity percolation threshold as low as 1.1 wt % polyaniline in an emeraldine base, showing 2 orders of magnitude higher electrical conductivity than that without electrostatic interactions. The electrostatic-interaction hybrids also showed good water resistance; the electrical conductivity with a cPANI loading of 16 wt % underwent a slight change after 14 days of soaking in water.