Grain Refinement at the Nanoscale Via Mechanical Twinning and Dislocation Interaction in a Nickel-Based Alloy

A nanostructured surface layer was formed on an Inconel 600 plate by subjecting it to surface mechanical attrition treatment at room temperature. Transmission electron microscopy and high-resolution transmission electron microscopy of the treated surface layer were carried out to reveal the underlying grain refinement mechanism. Experimental observations showed that the strain-induced nanocrystallization in the current sample occurred via formation of mechanical microtwins and subsequent interaction of the microtwins with dislocations in the surface layer. The development of high-density dislocation arrays inside the twin-matrix lamellae provides precursors for grain boundaries that subdivide the nanometer-thick lamellae into equiaxed, nanometer-sized grains with random orientations.

Rapidly solidified nonequilibrium microstructure and phase transformation of laser-synthesized iron-based alloy coating

The rapidly solidified microstructural and compositional features, the precipitation and transformation of carbides during tempering, and the impact wear resistance of an iron-based alloy coating prepared by laser cladding are investigated. The clad coating alloy, a powder mixture of Fe, Cr, W, Ni, and C with a weight ratio of 10:5:1.1.1, is processed using a continuous wave CO, laser. Microstructural studies demonstrate that the coating possesses the hypoeutectic microstructure comprising the primary dendritic gamma-austenite and interdendritic eutectic consisting of gamma-austenite and M7C3 carbides. gamma-Austenite is a non-equilibrium phase with an extended solid solution of alloying elements. During high temperature tempering at 963 K for 1 h, the precipitation of M23C6, MC and M2C carbides in austenite and in situ carbide transformation of M7C3 to M23C6 and M7C3 to M6C respectively are observed. In addition, the microstructure of the laser-clad coating reveals an evident secondary hardening and a superior impact wear resistance.

Effect of Nd on the microstructure, mechanical properties and corrosion behavior of die-cast Mg-4Al-based alloy

Die-cast Mg-4Al-0.4Mn-xNd(x = 0, 1, 2, 4 and 6 wt.%) magnesium alloys were prepared successfully and influences of Nd on the microstructure, mechanical properties and corrosion behavior of the Mg-4Al-0.4Mn alloy have been investigated. The results showed that with the addition of Nd binary Al2Nd phase and Al11Nd3 phase. which mainly aggregated along the grain boundaries, were formed, and the relative ratio of above two phases was in correlation with the Nd content in the alloy. Meanwhile, the grain sizes were greatly reduced with the increasing Nd content. It was found that due to the addition of Nd both the tensile properties and corrosion resistance were improved substantially.

Structure and mechanical properties of extruded Mg-Gd based alloy sheet

The Mg-8Gd-2Y-1Nd-0.3Zn-0.6Zr (wt.%) alloy sheet was prepared by hot extrusion technique, and the structure and mechanical properties of the extruded alloy were investigated. The results show that the alloy in different states is mainly composed of alpha-Mg solid solution and secondary phases of Mg5RE and Mg24RE5 (RE = Gd, Y and Nd). At aging temperatures from 200 degrees C to 300 degrees C the alloy exhibits obvious age-hardening response. Great improvement of mechanical properties is observed in the peak-aged state alloy (aged at 200 degrees C for 60 h), the ultimate tensile strength (sigma(b)), tensile yield strength (sigma(0.2)) and elongation (epsilon) are 376 MPa, 270 MPa and 14.2% at room temperature (RT), and 206 MPa. 153 MPa and 25.4% at 300 degrees C, respectively, the alloy exhibits high thermal stability.

Effect of La-Mg-based alloy addition on structure and electrochemical characteristics of Ti0.10Zr0.15V0.35Cr0.10Ni0.30 hydrogen storage alloy

Effect of La-Mg-based alloy (AB(5)) addition on Structure and electrochemical characteristics of Ti0.10Zr0.15V0.35Cr0.10Ni0.30 hydrogen storage alloy has been investigated systematically. XRD shows that the matrix phase structure is not changed after adding AB(5) alloy, however, the amount of the secondary phase increases with increasing AB(5) alloy content. The electrochemical measurements show that the plateau pressure Ti0.10Zr0.15V0.35Cr0.10Ni0.30 + x% La0.85Mg0.25Ni4.5Co0.35Al0.15 (X = 0, 1, 5, 10, 20) hydrogen storage alloys increase with increasing x, and the width of the pressure plateau first increases when x increases from 0 to 5 and then decreases as x increases further, and the maximum discharge capacity changes in the same trend.

Structure stability and strengthening mechanism of die-cast Mg-Gd-Dy based alloy

Mg-8Gd-1Dy-0.3Zn (wt.%) alloy was prepared by high-pressure die-casting technique. The thermal stability, mechanical properties at temperature range from room temperature to 573 K and strengthening mechanism was investigated. The results showed that the die-cast state alloy was mainly composed of fine cellular equiaxed grain. The fine porosity-free skin region was related to the aggregation of rare earth elements. The long lamellar-shaped stacking compound containing Zn and polygon-shaped precipitate were observed along the grain boundaries. The die-cast sample exhibited high mechanical properties and good thermal stability until 523 K.

Microstructure and Strengthening Mechanism of Die-Cast Mg-Gd Based Alloys

Mg-8Gd-2Y-Nd-0.3Zn (wt%) alloy was prepared by the high pressure die-cast technique. The microstructure, mechanical properties in the temperature range from room temperature to 573 K, and strengthening mechanism were investigated. It was confirmed that the Mg-Gd-based alloy with high Gd content exhibited outstanding die-cast character. The die-cast alloy was mainly composed of small cellular equiaxed dendrites and the matrix. The long lamellar-shaped stacking compound of Mg3X (X: Gd, Y, Nd, and Zn) and polygon-shaped.

铁基激光熔覆合金设计及微观组织与性能研究

本文设计并制备了具有优良的强韧性能和高温性能的激光熔覆涂层。利用 SEM、TEMEY X－射线衍射仪等研究了涂层的化学成分、宏微观结构及其转变机制，同时研究了涂层强韧性及耐高温磨损性能及其影响机制。对激光溶覆涂层进行了合金化、微观组织、强韧化机制、加工工艺性能设计。合金系为 Fe-Cr-C-W-Ni，成分配比（质量分数），Fe:52-60%, Cr:24-30%, C:5-6%, W:4.5-7.5%, Ni:5-6%。强化机制为两相强化、亚结构强化及固溶强化，其中强化相为合金碳化物，基体相为合金元素过饱和度极高的韧性奥氏体。亚共晶及过共晶组织的领先凝固相分别为奥氏体及 M_7C_3 合金碳化物，两相共晶组织均为韧性相奥氏体和强化相 M_7C_3 合金碳化物。加工工艺控制领先凝固相的结构、组织演化及力学性能。熔覆组织在高温时效过程中形成大量新的碳化物。在过饱和奥氏体内部，可弥散析出细小的 Mc、M_2C 及 M_(23)C_6碳化物；在奥氏体与 M_7C_3 相界面，亚稳相M_7C_3发生原位转变，形成 M_(23)C_6 及 M_6C碳化物。激光熔覆合金具有较高的综合力学性能，熔覆涂层有高的显微硬度、优良的抗回火稳定性、显著的二次硬化特征、优异的抗磨粒磨损和冲击磨损性能。Fe-Cr-C-W-Ni 激光熔覆合金具有较低的裂纹形成倾向和良好的表面成形性能，这与奥氏体较高的高温韧塑性及合金的低熔点共晶特征密切相关；实验及理论分析表明，通过调整合金成分、激光工艺参数和后续热处理工艺，可获得具有不同强韧性能的熔覆涂层。

银基催化剂催化氧化反应的研究

银催化剂是工业上较为重要的催化剂，它不仅大量地使用在乙烯环氧化，甲醇脱氢反应中，还在异丙醇氧化脱氢制丙酮，乙醇脱氢制乙醛，乙二醇氧化制乙二醛，烷基胺氧化制睛类化合物等工业过程中广为应用。由于银催化剂具有如此重要的工业应用价值，所以银催化剂一百多年来一直是催化领域的研究重点。银催化剂的特异催化行为得益于银元素较为特殊的电子结构以及氧物种在银催化上的独特催化行为。银催化剂表面既存在导致非选择氧化反应的氧物种（a氧），也存在导致选择氧化反应的氧物种（Y氧），这两种氧物种在催化剂上的状态与反应气氛及催化剂结构密切相关。一氧化碳氧化反应在环境保护、能源利用（燃料电池）、安全防护（火场、煤矿）有较为重要的用途；甲酸甲醋是近年新兴的较为重要的碳一化学中间体，它可以广泛应用于有机合成反应中，也可以作为安全的合成气载体；醇类选择氧化制备相应的醛酮化合物也是有机合成工业的重要反应之一；甲苯气相氧化制备苯甲醛是研究烃类选择氧化较为重要的模型反应，在工业上存在潜在的应用价值。本论文以上述的四个反应为探针反应研究了银基催化剂的催化行为，得到以下的结果：1．以烷基胺为模板剂制备了过渡金属离子掺杂的介孔分子筛，通过模板剂－离子交换技术制备了含银基复合氧化物的介孔分子筛催化剂。该系列催化剂对一氧化碳氧化反应有较好的活性。同时研究了金属盐的种类及掺杂量对介孔分子筛结构的影响，发现金属离子的掺杂会破坏介孔分子筛的结构的有序性，随着掺杂量的增大，介孔分子筛的结构的有序性变差；金属盐的阴离子对介孔分子筛的结构的有序性亦有影响。2．较为系统研究了银基催化剂上由甲醇制备甲酸甲酷的催化行为，发现银基催化剂是一个选择性较高的催化体系。分立测试了不同的氧物种对甲醇反应的影响，提出了a氧与Y氧协同作用的机理，为解决甲醇脱氢反应机理争端提供了有价值的信息。3．系统研究了低级醇在金属银催化剂的脱氢反应，分立测试了不同的氧物种对甲醇、乙醇反应的影响，发现低于550K时不同的氧物种对乙醇的反应性能有显著的差异，认为低温（＜550K）条件下，醇类在金属银催化剂上发生的是氧化脱氢历程。通过借鉴均相醇类氧化脱氢反应研究所取得的成果，试图从本质上解释银是醇类气相氧化脱氢最好的催化剂的原因，即在过渡金属中，金属银上的氧物种的碱性是最强的，氧的再生能力也是很强的。4．在甲苯的选择氧化研究中发现在高温（600℃）、纯氧、甲醇参与的条件下，Pt一Ag催化剂对苯甲醛的收率最好（-6％），提出了分子氧参与生成含氧自由基中间产物、醇类淬灭自由基态中间产物的反应历程，与传统甲苯氧化所经历的Mars-Krevelen机理有差别，为烃类的选择氧化提供了新的信息。

Effects of rare earth on the structure and properties of Mg–6Zn–5Al–4Gd–1RE (RE = Ce or Y) alloys

The microstructures and mechanical properties of Mg-6Zn-5Al-4Gd-1RE (RE = Ce or Y) alloys were investigated. The addition of Ce or Y obviously refines the grain size for the Mg-6Zn-5Al-4Gd-based alloy, while the Y element has a better refining effect. The Ce and Y show different grain-refining mechanisms: Ce addition mostly promotes the growth of secondary dendrite, while Y addition mainly increases the heterogeneous nucleation sites.

Crystallographic and electrochemical characteristics of melt-spun Ti-Zr-Ni-La alloys

Ti-based icosahedral quasicrystalline phase (I-phase) exhibited excellent hydrogen storage property for special structure. Unfortunately, the application as the negative electrode material of the nickel-metal hydride batteries was limited due to the poor electrochemical kinetics. Meanwhile, rare-earth element was beneficial to the electrochemical properties of Ti, Zr-based alloy.

The mechanical properties of an aluminum alloy by plasma-based ion implantation and solution-aging treatment

The age-strengthening 2024 aluminum alloy was modified by a combination of plasma-based ion implantation (PBII) and solution-aging treatments. The depth profiles of the implanted layer were investigated by X-ray photoelectron spectroscopy (XPS). The structure was studied by glancing angle X-ray diffraction (GXRD). The variation of microhardness with the indenting depth was measured by a nanoindenter. The wear test was carried on with a pin-on-disk wear tester. The results revealed that when the aluminum alloys were implanted with nitrogen at the solution temperature, then quenched in the vacuum chamber followed by an artificial aging treatment for an appropriate time, the amount of AIN precipitates by the combined treatment were more than that of the specimen implanted at ambient temperature. Optimum surface mechanical properties were obtained. The surface hardness was increased and the weight loss in a wear test decreased too.

Transmission Electron Microscopy Characterization of Laser Welding Cast Ni-Based Superalloy K418 Turbo Disk And Alloy Steel 42Crmo Shaft

Microstructure characterization is important for controlling the quality of laser welding. In the present work, a detailed microstructure characterization by transmission electron microscopy was carried out on the laser welding cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft and an unambiguous identification of phases in the weldment was accomplished. It was found that there are gamma-FeCrNiC austenite solid solution dendrites as the matrix, (Nb, Ti) C type MC carbides, fine and dispersed Ni-3 Al gamma' phase as well as Laves particles in the interdendritic region of the seam zone. A brief discussion was given for their existence based on both kinetic and thermodynamic principles. (c) 2007 Elsevier B.V. All rights reserved.

Research on laser welding of cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft

Exploratory experiments of laser welding cast Ni-based superalloy K418 turbo disk and alloy steel 42CrMo shaft were conducted. Microstructure of the welded seam was characterized by optical microscopy (OM), scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive spectrometer (EDS). Mechanical properties of the welded seam were evaluated by microhardness and tensile strength testing. The corresponding mechanisms were discussed in detail. Results showed that the laser-welded seam had non-equilibrium solidified microstructures consisting of FeCr0.29Ni0.16C0.06 austenite solid solution dendrites as the dominant and some fine and dispersed Ni3Al gamma' phase and Laves particles as well as little amount of MC short stick or particle-like carbides distributed in the interdendritic regions. The average microhardness of the welded seam was relatively uniform and lower than that of the base metal due to partial dissolution and suppression of the strengthening phase gamma' to some extent. About 88.5% tensile strength of the base metal was achieved in the welded joint because of a non-full penetration welding and the fracture mechanism was a mixture of ductility and brittleness. The existence of some Laves particles in the welded seam also facilitated the initiation and propagation of the microcracks and microvoids and hence, the detrimental effects of the tensile strength of the welded joint. The present results stimulate further investigation on this field. (c) 2006 Elsevier B.V. All rights reserved.

Characteristics of deep penetration laser welding of dissimilar metal Ni-based cast superalloy K418 and alloy steel 42CrMo

Experimental trials of autogenous deep penetration welding between dissimilar cast Ni-based superalloy K418 and alloy steel 42CrMo flat plates with 5.0 mm thickness were conducted using a 3 kW continuous wave (CW) Nd:YAG laser. The influences of laser output power, welding velocity and defocusing distance on the morphology, welding depth and width as well as quality of the welded seam were investigated. Results show that full keyhole welding is not formed on both K4.18 and 42CrMo side, simultaneously, due to the relatively low output power. Partial fusion is observed on the welded seam near 42CrMo side because of the large disparity of thermal-physical and high-temperature mechanical properties of these two materials. Tile rnicrohardness of the laser-welded joint was also examined and analyzed. It is suggested that applying negative defocusing in the range of Raylei length can increase the welding depth and improve tile coupling efficiency of the laser materials interaction. (c) 2007 Elsevier Ltd. All rights reserved.