Triple-region structure for turbulent-flow in a square duct - a finite-element approach

The Reynolds-averaged Navier-Stokes equations for describing the turbulent flow in a straight square duct are formulated with two different turbulence models. The governing equations are then expanded as a multi-deck structure in a plane perpendicular to the streamwise direction, with each deck characterized by its dominant physical forces as commonly carried out in analytical work using triple-deck expansion. The resulting equations are numerically integrated using higher polynomial (H-P) finite element technique for each cross-sectional plane to be followed by finite difference representation in the streamwise direction until a fully developed state is reached. The computed results using the two different turbulence models show fair agreement with each other, and concur with the vast body of available experimental data. There is also general agreement between our results and the recent numerical works anisotropic k-epsilon turbulence model.

Computation of turbulent-flow in a square duct - aspects of the secondary flow and its origin

A numerical study of turbulent flow in a straight duct of square cross-section is made. An order-of-magnitude analysis of the 3-D, time-averaged Navier-Stokes equations resulted in a parabolic form of the Navier-Stokes equations. The governing equations, expressed in terms of a new vector-potential formulation, are expanded as a multi-deck structure with each deck characterized by its dominant physical forces. The resulting equations are solved using a finite-element approach with a bicubic element representation on each cross-sectional plane. The numerical integration along the streamwise direction is carried out with finite-difference approximations until a fully-developed state is reached. The computed results agree well with other numerical studies and compare very favorably with the available experimental data. One important outcome of the current investigation is the interpretation analytically that the driving force of the secondary flow in a square duct comes mainly from the second-order terms of the difference in the gradients of the normal and transverse Reynolds stresses in the axial vorticity equation.

SECRETORY MONOCLONAL IGA ANTIBODY TO HUMAN SPERM PRODUCED BY GASTROINTESTINAL IMMUNIZATION INHIBITS HUMAN SPERM ACTIVITY AND MOUSE INVITRO FERTILIZATION

BALB/c mice were immunized intragastrically with human sperm. Cells from the Peyer's patches and spleens of the immunized mice were for the preparation of hybridomas secreting antisperm monoclonal IgA (mcIgA). The specific ratio of IgA-secreting cells in Peyer's patches was much higher than that in spleen. The binding site on human sperm of 9 of 19 mcIgA was in the post-acrosomal region using an immunofluorescent assay. Two of eight selected mcIgA caused strong human sperm agglutination and three of them produced significant inhibition of mouse in vitro fertilization. No mcIgA tested caused obvious human sperm immobilization or inhibited mouse in vivo fertilization. In vitro assembly of selected mcIgA in ascites with mouse secretory component (SC) caused no significant changes in effects on sperm function and in vitro fertilization. By use of Western blotting, dimer or higher polymers were demonstrated in all selected mcIgAs and corresponding protein antigens in 6 of 8 selected mcIgAs. These results suggest that human sperm function may be inhibited and fertilization rate reduced by specific secretory IgA to human sperm and that secretory immunity to protein antigens of human sperm could be induced by intragastrointestinal immunization.

Independent Transport and Sorting of Functionally Distinct Protein Families in Tetrahymena thermophila Dense Core Secretory Granules

Dense core granules (DCGs) in Tetrahymena thermophila contain two protein classes. Proteins in the first class, called granule lattice (Grl), coassemble to form a crystalline lattice within the granule lumen. Lattice expansion acts as a propulsive mechanism during DCG release, and Grl proteins are essential for efficient exocytosis. The second protein class, defined by a C-terminal beta/gamma-crystallin domain, is poorly understood. Here, we have analyzed the function and sorting of Grt1p (granule tip), which was previously identified as an abundant protein in this family. Cells lacking all copies of GRT1, together with the closely related GRT2, accumulate wild-type levels of docked DCGs. Unlike cells disrupted in any of the major GRL genes, Delta GRT1 Delta GRT2 cells show no defect in secretion, indicating that neither exocytic fusion nor core expansion depends on GRT1. These results suggest that Grl protein sorting to DCGs is independent of Grt proteins. Consistent with this, the granule core lattice in Delta GRT1 Delta GRT2 cells appears identical to that in wild-type cells by electron microscopy, and the only biochemical component visibly absent is Grt1p itself. Moreover, gel filtration showed that Grl and Grt proteins in cell homogenates exist in nonoverlapping complexes, and affinity-isolated Grt1p complexes do not contain Grl proteins. These data demonstrate that two major classes of proteins in Tetrahymena DCGs are likely to be independently transported during DCG biosynthesis and play distinct roles in granule function. The role of Grt1p may primarily be postexocytic; consistent with this idea, DCG contents from Delta GRT1 Delta GRT2 cells appear less adhesive than those from the wild type.

Predominant expression and cellular distribution of fish Agr2 in renal collecting system

Anterior gradient 2 (Agr2) genes encode secretory proteins, and play significant roles in anterior-posterior patterning and tumor metastasis. Agr2 transcripts were shown to display quite diverse tissue distribution in different species, and little was known about the cellular localization of Agr2 proteins. In this study, we identified an Agr2 homologue from gibe[ carp (Carassius auratus gibelio), and revealed the expression patterns and cellular localization during embryogenesis and in adult tissues. The full-length cDNA of CagAgr2 is 803 nucleotides (nt) with an open reading frame of 510 nt encoding 169 amino acids. The Agr2 C-terminus matches to the class I PDZ-interacting motif, suggesting that it might be a PDZ-binding protein. During embryogenesis, CagAgr2 was found to be transcribed in the mucus-secreting hatching gland from tailbud stage and later in the pharynx region, swim bladder and pronephric duct as revealed by RT-PCR and whole mount in situ hybridization. In the adult fish, its transcription was predominantly confined to the kidney, and lower transcription levels were also found in the intestine, ovary and gills. To further localize the Agr2 protein, the anti-CagAgr2 polyclonal antibody was produced and used for immunofluorescence observation. In agreement with mRNA expression data, the Agr2 protein was localized in the pronephric duct of 3dph larvae. In adult fish, Agr2 protein expression is confined to the renal collecting system with asymmetric distribution along the apical-basolateral axis. The data provided suggestive evidence that fish Agr2 might be involved in differentiation and secretory functions of kidney epithelium. (C) 2009 Elsevier Inc. All rights reserved.

Feasibility of biodegradable PLGA common bile duct stents: An in vitro and in vivo study

The current study investigates the feasibility of using a biodegradable polymeric stent in common bile duct (CBD) repair and reconstruction. Here, poly(l-lactide-co-glycolide) (PLGA, molar ratio LA/GA = 80/20) was processed into a circular tube- and dumbbell-shaped specimens to determine the in vitro degradation behavior in bile. The morphology, weight loss, and molecular weight changes were then investigated in conjunction with evaluations of the mechanical properties of the specimen. Circular tube-shaped PLGA stents with X-ray opacity were subsequently used in common bile duct exploration (CBDE) and primary suturing in canine models. Next, X-ray images of CBD stents in vivo were compared and levels of serum liver enzymes and a histological analysis were conducted after stent transplantation. The results showed that the PLGA stents exhibited the required biomedical properties and spontaneously disappeared from CBDs in 4-5 weeks. The degradation period and function match the requirements in repair and reconstruction of CBDs to support the duct, guide bile drainage, and reduce T-tube-related complications.

玉米粉火焰在开口垂直管道中的传播

以对粉尘云状态参数的定量测定为基础，对玉米粉尘火焰在开口垂直管道中向上传播的过程进行了实验研究．在情形A中，火焰从管道的封闭端向开口端传播，在情形B中，从开口端向封闭端传播．实验中，观察到两种粉尘火焰，即湍流火焰和层流火焰，火焰形态转变对应的点火延迟时间约等于1．1s，即粉尘云湍流运动强度为10cm／s．情形A中，层流火焰的传播出现周期性振荡现象，湍流火焰在传播过程中不断加速；情形B中，两种火焰都匀速传播，湍流火焰传播速度明显大于层流火焰．在所考察的实验条件下，粉尘浓度对于玉米粉尘火焰传播速度的影响不大。

Numerical Simulation and Experimental Investigation about Internal and External Flows

In this paper, TASCflow3D is used to solve inner and outer 3D viscous incompressible turbulent flow (R-e = 5.6 X 10(6)) around axisymmetric body with duct. The governing equation is a RANS equation with standard k-epsilon turbulence model. The discrete method used is a finite volume method based on the finite element approach. In this method, the description of geometry is very flexible and at the same time important conservative properties are retained. The multi-block and algebraic multi-grid techniques are used for the convergence acceleration. Agreement between experimental results and calculation is good. It indicates that this novel approach can be used to simulate complex flow such as the interaction between rotor and stator or propulsion systems containing tip clearance and cavitation.

Effects of entry conditions on cracked kerosene-fueled supersonic combustor performance

Supersonic combustion of thermally cracked kerosene was experimentally investigated in two model supersonic combustors with different entry cross-section areas. Effects of entry static pressure, entry Mach number, combustor entry geometry, and injection scheme on combustor performance were systematically investigated and discussed based on the measured static pressure distribution and specific thrust increment due to combustion. In addition, the methodology for characterizing flow rate and composition of cracked kerosene was detailed. Using a pulsed Schlieren system, the interaction of supercritical and cracked kerosene jet plumes with a Mach 2.5 crossflow was also visualized at different injection temperatures. The present experimental results suggest that the use of a higher combustor entry Mach number as well as a larger combustor duct height would suppress the boundary layer separation near the combustor entrance and avoid the problem of inlet un- start.

Numerical Simulation and Experimental Investigation about Internal and External Flows

In this paper, TASCflow3D is used to solve inner and outer 3D viscous incompressible turbulent flow (R-e = 5.6 X 10(6)) around axisymmetric body with duct. The governing equation is a RANS equation with standard k-epsilon turbulence model. The discrete method used is a finite volume method based on the finite element approach. In this method, the description of geometry is very flexible and at the same time important conservative properties are retained. The multi-block and algebraic multi-grid techniques are used for the convergence acceleration. Agreement between experimental results and calculation is good. It indicates that this novel approach can be used to simulate complex flow such as the interaction between rotor and stator or propulsion systems containing tip clearance and cavitation.

An Experimental Study on Flame Propagation in Cornstarch Dust Clouds

Following the quantitative determination of dust cloud parameters, this study investigates the flame propagation through cornstarch dust clouds in a vertical duct of 780 mm height and 160 x 160 mm square cross section, and gives particular attention to the effect of small scale turbulence and small turbulence intensity on flame characteristics. Dust suspensions in air were produced using an improved apparatus ensuring more uniform distribution and repeatable dust concentrations in the testing duct. The dispersion-induced turbulence was measured by means of a particle image velocimetry (PIV) system, and dust concentrations were estimated by direct weighing method. This quantitative assessment made it possible to correlate observed flame behaviors with the parameters of the dust cloud. Upward propagating dust flames, from both closed/open bottom end to open/closed top end of the duct, were visualized by direct light and shadow photography. From the observation of propagation regimes and the measurements of flame velocity, a critical value of the turbulence intensity can be specified below which laminar flame propagation would be established. This transition condition was determined to be 10 cm/s. Laminar flames propagated with oscillations from the closed bottom end to the open top end of the testing duct, while the turbulent flames accelerated continuously. Both laminar and turbulent flames propagated with steady velocity from the open bottom end to the closed top end of the duct. The measured propagation velocity of laminar flames appeared to be in the range of 0.45-0.56 m/s, and it was consistent with the measurements reported in the literature. In the present experimental study, the influence of dust concentration on flame propagation was also examined, and the flame propagation velocity was found weakly sensitive to the variations in dust concentration. Some information on the flame structure was revealed from the shadow records, showing the typical heterogeneous feature of the dust combustion process.

白杄花粉管胞吞/胞吐动态及其与细胞壁构建的关系

在有花植物受精过程中，具有顶端极性生长特性的花粉管是雄性生殖单位的载体，同时也是研究细胞生长分子调控机理的理想体系。与被子植物相比，裸子植物花粉具有萌发时间长、花粉管生长缓慢等特点。对于裸子植物花粉萌发和花粉管生长的机理，目前人们尚不十分清楚。本文将以裸子植物白杄（Picea meyeri）花粉为材料，应用不同浓度的分泌系统干扰剂Brefeldin A处理，并通过细胞学和生理生化方法，其中包括普通光学显微镜、荧光显微镜、激光扫描共聚焦显微镜、显微红外光谱（FTIR）和透射电镜（TEM）等技术，对其花粉萌发和花粉管生长过程中胞吞胞吐的调控，以及与细胞壁建成的关系等进行较为系统的研究，旨在为进一步揭示裸子植物花粉管发育的调控机理提供参考。 首先比较观察了各种细胞器在白杄与被子植物花粉管中的分布差异。经FM4-64探针标记结果表明，在正常生长的白杄花粉管顶端存在分泌小泡积累的透明区，但与被子植物比较起来，此透明区在花粉管中所占比例较小，且不呈倒“V”字型。在透射电镜下观察发现，其花粉管顶端透明区内分泌小泡的分布密度远低于被子植物。另外，在白杄花粉管中，线粒体的分布一般靠近细胞壁的地方，高尔基体分布较为分散，而内质网的分布则不具方向性。 其次，研究了BFA对白杄花粉萌发和花粉管生长的影响，特别是对其花粉管生长过程中的胞吐/胞吞作用。通常在正常生长的白杄花粉管中，用FM4-64标记后发现，在其顶端形成与透明区对应的荧光亮区;超微结构显示，在花粉管顶端进行旺盛的胞吐作用，许多分泌小泡正与质膜融合，以及分布有大量显示高分泌活性的壁旁体（PB）等。而经过BFA处理后，花粉的萌发和花粉管的生长均受到严重抑制，花粉管出现了弯曲（波状生长）或顶端膨大等异常形态，同时还干扰了FM4-64在花粉管顶端的标记模式。另外，花粉管顶端分泌小泡数量减少，透明区内充满线粒体、高尔基体和空泡等一些大的细胞器，壁旁体也随之消失，其中高尔基体呈现解体或弯曲的异常形态，在其周围的分泌小泡数量大大减少，内质网出现膨胀和核糖体脱落等;同时胞吐活性标志性酶——酸性磷酸酶的活性也随之降低。通过对FM4-64的染料吸收实验表明，BFA对胞吞有明显的促进作用。由上可见，BFA对白杄花粉管生长过程中的胞吐和胞吞作用起了相反的影响， BFA正是通过扰乱花粉管生长过程中的分泌途径来抑制其花粉管的生长。 最后，检测了白杄花粉管分泌途径紊乱后，管壁物质合成的变化情况。通过FTIR光谱分析表明，BFA处理后花粉管壁化学组分发生了变化，例如蛋白质和多糖含量明显减少，而且与蛋白比较起来，多糖的含量下降更为明显，尤其是在顶端。蛋白和多糖含量的下降导致花粉管壁的组成结构不够致密。由SDS-PAGE的结果显示， BFA抑制后，花粉管壁中糖蛋白的含量下降了60%，同时很多壁蛋白条带在BFA处理后不表达或含量减少。通过对花粉管壁多糖成分的研究表明，BFA处理还导致纤维素含量下降，而胼胝质在花粉管顶端积累。用识别AGPs的LM6和识别酸性果胶的JIM5对花粉管进行标记，发现BFA处理后AGPs的环状分布消失，酸性果胶质在顶端的含量也明显减少，但在胞质内却形成一些小的分隔亮点（compartments）。 综上所述，导致裸子植物白杄花粉管生长缓慢的原因，可能与其顶端透明区较小、分泌小泡数量少等有关。另外，从白杄花粉管的细胞质状态和细胞器分布上看，虽然与被子植物相比差异较大，但在其正常生长中仍能进行旺盛地胞吐和胞吞过程。经BFA处理后引起花粉管内分泌系统的紊乱，致使管壁物质不能正常合成，从而导致花粉管的停滞生长。

A bactericidal homodimeric phospholipases A(2) from Bungarus fasciatus venom

Group IIA secretory phospholipases A(2) (sPLA(2)-II) is generally known to display potent grampositive bactericidal activity, while group IA sPLA(2) (sPLA(2)-I) reportedly is not. In this work, a novel sPLA(2)-I named BFPA was identified from Bungarus fas

A horsefly saliva antigen 5-like protein containing RTS motif is an angiogenesis inhibitor

The Ag5 proteins are the most abundant and immunogenic proteins in the venom secretory ducts of stinging insects. An antigen 5-like protein (named tabRTS) composed of 221 amino acid residues was purified and characterized from the salivary glands of the horsefly, Tabanus yao (Diptera, Tabanidae). Its cDNA was cloned from the cDNA library of the horsefly's salivary gland. TabRTS containing the SCP domain (Sc7 family of extracellular protein domain) was found in insect antigen 5 proteins. More interestingly, there is an Arg-Thr-Ser (RTS) disintegrin motif at the C-terminus of tabRTS. The RTS motif is positioned in a loop bracketed by cysteine residues as those found in RTS-disintegrins of Crotalidae and Viperidae snake venoms, which act as angiogenesis inhibitors. Endothelial Cell Tube formation assay in vitro and chicken chorioallantoic membrane (CAM) angiogenesis assay in vivo were performed as to investigate the effect of tabRTS on angiogenesis. It was found that tabRTS could significantly inhibit angiogenesis in vitro and in vivo. Anti-alpha(1)beta(1) monoclonal antibody could dose-dependently inhibit the anti-angiogenic activity of tabRTS. This result indicated that tabRTS possibly targets the alpha(1)beta(1) integrin to exert the anti-angiogenic activity as snake venom RTS-/KTS-disintegrins do. The current work revealed the first angiogenesis inhibitor protein containing RTS motif from invertebrates, a possible novel type of RTS-disintegrin. (C) 2009 Elsevier Ltd. All rights reserved.