An ultra-low power CMOS random number generator

This paper proposes an ultra-low power CMOS random number generator (RING), which is based on an oscillator-sampling architecture. The noisy oscillator consists of a dual-drain MOS transistor, a noise generator and a voltage control oscillator. The dual-drain MOS transistor can bring extra-noise to the drain current or the output voltage so that the jitter of the oscillator is much larger than the normal oscillator. The frequency division ratio of the high-frequency sampling oscillator and the noisy oscillator is small. The RNG has been fabricated in a 0.35 mu m CMOS process. It can produce good quality bit streams without any post-processing. The bit rate of this RNG could be as high as 100 kbps. It has a typical ultra-low power dissipation of 0.91 mu W. This novel circuit is a promising unit for low power system and communication applications. (c) 2007 Elsevier Ltd. All rights reserved.

Controlling parameter for wave types of long flexible riser undergoing vortex-induced vibration

Submerged floating tunnel (SFT) is a popular concept of crossing waterways. The failure of the cable may occur due to vortex-induced-vibration (VIV), and the stability of the cable is crucial to the safety of the entire tunnel. Investigation results in recent years show that the vortex-induced vibration of the flexible cables with large aspect ratio reveals some new phenomena, for example, the vortex-induced wave, multi-mode competition, wide band random vibration, which have brought new challenges to the study of vortex-induced vibration of long flexible cables. In this paper, the dimensionless parameter controlling the wave types of dynamic response of slender cables undergoing vortex-induced vibration is investigated by means of dimensional analysis and finite element numerical simulations. Our results indicate that there are three types of response for a slender cable, i.e. standing wave vibration, traveling wave vibration and intermediate state. Based on dimensional analysis the controlling parameter is found to be related to the system damping including fluid damping and structural damping, order number of the locked-in modes and the aspect ratio of cable. Furthermore through numerical simulations and parameter regression, the expression and the critical value of controlling parameter is presented. At last the physical meaning of the parameter is analyzed and discussed.

轮式移动宜人机器人技术研究

轮式移动宜人机器人项目研究的主要目的是开发自主式仿人机器人样机 ,探索先进的机器人理论和技术。轮式移动宜人机器人由正交轮式移动平台、腰部、躯干及头部和双臂组成 ,共 2 1个自由度。整体结构包括 :电源系统、机械系统、控制系统和传感系统。电源系统采用车载电池供电。机械系统包括变刚度结构 ,提高了机器人与人交互作业的安全性。控制系统分为中央协调层和执行层结构。传感系统主要实现关节位置检测、姿态检测、力检测和视觉。文章讨论了此机器人的研究进展。

分布式过程控制系统在大电流稳流控制中的应用

本文介绍了一个用于供电系统的ＤＰＣＳ，以及智能控制─实时专家系统控制在ＤＰＣＳ中的应用、特点和实现。

汉字微机数据库及其在东北电力系统中的应用

汉字微机数据库的最大缺点是速度太慢,因此难以实用化。本文提出了一种新的汉字检索方法——标志域法,解决了这个关键问题,使查找速度提高了近十倍;再采用单层连续提问等一系列措施,还可节省相当多的存储空间,扩大了微型机的应用范围。本数据库非常适合于“最终用户”使用,即使是不懂计算机的人,也能在一、两分钟内学会使用它。

随机系统辨识在电力系统负荷预报中的应用

本文将随机系统状态模型辨识技术用于电力系统负荷预报。首先根据负荷的一系列历史数据建立负荷的状态空间模型,然后用滤波算法进行次日负荷预报,最后用电网实际数据在 PDP-11/23计算机上进行预报计算,得到比较满意的结果。

利用网络拓扑法计算网损微增率

本文提出一个计算网损微增率的新途径。应用网络拓扑方法得到的网损修正值的直接数学表达式,不仅可利用系统潮流进行直接计算,而且有明确的物理概念,可用于实时经济调度。文中给出了计算方法和实例。

监控显示器及其在电力系统中的应用

这台显示器是根据某电力系统计算机控制的要求而设计的.本文简要介绍了设计特点及其在电力系统中实际应用的情况.本文介绍的监控显示器适用于工业过程控制.作者根据现场应用的经验,提出了研制工业监控显示器的一些想法.

Autothermal reforming of n-octane on Ru-based catalysts

In an attempt to effectively integrate catalytic partial oxidation (CPO) and steam reforming (SR) reactions on the same catalyst, autothermal reforming (ATR) of n-octane was addressed based on thermodynamic analysis and carried out on a non-pyrophoric catalyst 0.3 wt.% Ru/K2O-CeO2/gamma-Al2O3. The ATR of n-octane was more efficient at the molar ratio Of O-2/C 0.35-0.45 and H2O/C 1.6-2.2 (independent parameters), respectively, and reforming temperature of 750-800 degrees C (dependent parameter). Among the sophisticated reaction network, the main reaction thread was deducted as: long-chain hydrocarbon -> CH4, short-chain hydrocarbon -> CO2, CO and H-2 formation by steam reforming, although the parallel CPO, decomposition and reverse water gas shift reaction took place on the same catalyst. Low temperature and high steam partial pressure had more positive effect on CH4 SR to produce CO2 other than CO. This was verified by the tendency of the outlet reformate to the equilibrium at different operation conditions. Furthermore, the loss of active components and the formation of stable but less active components in the catalyst in the harsh ATR atmosphere firstly make the CO inhibition capability suffer, then eventually aggravated the ATR performance, which was verified by the characterizations of X-ray fluorescence, BET specific surface areas and temperature programmed reduction. (c) 2005 Elsevier B.V. All rights reserved.