Coupling of seagrass (Cymodocea nodosa) patch dynamics to subaqueous dune migratio

The coupling between patch dynamics - described by the patch growth (horizontal and vertical), patch mortality, and life-history of Cymodocea nodosa (Ucria) Aschers., and the disturbance caused by the migration of subaqueous dunes over the plants was examined in a shallow NW Mediterranean bay (Alfacs Bay) where this species maintains a patchy cover. C. nodosa shoots survived substantial burial rates (up to 2.4 mm/day) by growing vertically at rates proportional to, albeit four-fold slower than, burial rates. Patch death was caused by erosion as large subaqueous dunes migrated pass the plant patch. Patch growth was fastest over the progressing slope of the dunes ( similar to 2.5 m year super(-1)) and flowering was also stimulated by sand accretion. The time interval between the passage of consecutive dunes, which sets the time window available for patch development, ranged between 2 and 6 years. This time interval allowed C. nodosa to recolonize bare substrata, with patch formation occurring about half a year after the disturbance, and also allowed established shoots to complete their life-cycle and produce seeds and thus enable subsequent recolonization. The time windows available for patch development also set an upper limit to patch size of about 26 m. Significant cross correlations between dune topography and patch dynamics and plant flowering frequency provide evidence that the spatial heterogeneity in the vegetation is closely associated with the disturbance imposed by the migration of sand dunes. The migration of subaqueous dunes maintains C. nodosa in a continuous state of colonization involving spatially asynchronous patch growth and subsequent mortality, which is ultimately responsible for the characteristic patchy landscape of this Bay. 

岷江源头区植被景观与流域土壤侵蚀的动态相关性

作为复杂的生态过程之一，土壤侵蚀常常被空间景观异质性影响。深入地研究土壤侵蚀与植被景观的相关性对以减少水土流失为目的的河流中上游生态恢复工作来说十分重要。本文利用遥感和GIS 技术，对岷江源头区的植被景观和土壤侵蚀动态（1974年～2002 年）进行分析，并从景观生态学的角度，系统地研究了整体植被景观和不同的植被景观类型的景观特征与土壤侵蚀量、侵蚀模数以及土壤侵蚀强度的相关性，得出的结论主要有以下几个方面：1. 从植被景观特征与土壤侵蚀量和土壤侵蚀模数的相关性的角度出发，森林能最大限度地控制土壤侵蚀，草地对土壤侵蚀的控制能力不及森林，而且能在一定程度上增加土壤侵蚀。灌丛与土壤侵蚀量和土壤侵蚀模数的关系则比较复杂，还需要进一步地研究。农用地与森林、灌丛、草地等植被类型不同，它的增加将会明显地增加产沙量。随着各景观类型（灌丛除外）分布的镶嵌性的增强，土壤侵蚀量和侵蚀模数会减少。2. 从植被景观特征与土壤侵蚀强度的相关性的角度出发，在景观水平上，植被景观的景观多样性指数、景观破碎度指数、景观形状指数和景观聚集度指数均与土壤侵蚀强度有明显的相关性。在较轻侵蚀强度的区域中的植被景观具有更丰富的多样性和更低的破碎程度，景观的组分和结构都更加复杂，景观斑块的形状也比较复杂。同时，植被景观的空间异质性也较强。3. 从不同景观类型对土壤侵蚀强度的控制能力大小看：针叶林> 落叶阔叶林>针阔混交林> 灌丛> 草地> 农用地。同时，对于除农用地以外的其他植被景观类型来说，增加其平均斑块面积和形状的复杂性会在一定程度上减少土壤侵蚀强度。而对于农用地来说，斑块形状的简单化以及分布形式的均匀镶嵌化则是减少土壤侵蚀强度的有效手段。 As a complex ecological process, soil erosion is affected by the spatial landscape heterogeneity.The relation between soil erosion and landscape characteristic weights a lot in ecosystemrestoration that aim to control the soil erosion in watershed. By means of RS and GIStechniques, this study analyzed dynamic variations in landscape characteristic and soil erosionin the Minjiang headwater region over a period of 28 years to elucidate the interrelationshipsbetween landscape characteristics and soil erosion. The results are as follows:1. In terms of relation between landscape characteristics and soil erosion module, forest canmitigate the soil erosion much better than grass. The relation between shrub and soil erosionmodule is rather complicated that requests further more study to confirm how those two factorscorrelated with each other. Cultivated land differs from other landscape classes in creatingconditions most favorable for soil erosion. Moreover, the dispersion of all landscape classes,except for shrub, correlates with soil module negatively.II2. In terms of relation between landscape characteristics and soil erosion strength, the diversityindex, fragment index, shape index and contagion index of the vegetation in Minjiangheadwater region at landscape-level correlated with soil erosion clearly. Vegetation landscapein No and Slight erosion region is more diverse, fragmental and constructed in more complexway. The shape of those vegetation patches is also more complicated. The spatial heterogeneityof the vegetation landscape is much more evident than that located in moderate and strong erosion region too.3. At class-level, different landscape classes affected soil erosion strength in different ways.Taking the mitigating effect on erosion strength into consideration, landscape classes can bearranged in this turn: coniferous forest > Deciduous forest > Mixed forest > Shrub > Grassland > Cultivated land. At the same time, for most landscape classes, except for cultivated land,increase the mean patch size and complicate the shape of patch will help to relieve the erosionstrength. However, for cultivated land, simplifying the shape of patch and scattering thepatches have the same effect.

Size-dependent inelastic behavior of particle-reinforced metal-matrix composites

The strengthening behavior of particle-reinforced metal-matrix composites (MMCp) is primarily attributed to the dislocation strengthening effect and the load-transfer effect. To account for these two effects in a unified way, a new hybrid approach is developed in this paper by incorporating the geometrically necessary dislocation strengthening effect into the incremental micromechanical scheme. By making use of this hybrid approach, the particle-size-dependent inelastic deformation behavior of MMCp is given. Some comparisons with the available experimental results demonstrate that the present approach is satisfactory.

Kinetic and Size Control of Polystyrene and Polyacrylic Octadecyl Ester Lattices Via Polymerization in O/W Microemulsions

The kinetic studies of the acrylic octadecyl ester and styrene polymerization in microemulsion systems, (1) cetyl pyridine bromide (CPDB)/t-butanol/styrene/water; (2) CPDB/t-butanol/toluene + acrylic octadecyl ester (1:1, w/v)/ water; (3) cetyl pyridine bromide/styrene/formamide, were made by using dynamic laser light scattering techniques (DLS). The mechanisms of nucleation of latex particles were discussed. The most possible nucleation location of the styrene and acrylic octadecyl ester microlatex particles in aqueous microemulsion system is in aqueous phase via homogeneous nucleation. Meanwhile, parts of microlatex particles are possibly produced via swollen micelles (microemulsions) and monomer droplets nucleation. On the other hand, the most possible nucleation location of the styrene microlatex particles in nonaqueous microemulsion system is inside monomer droplets. The relationship between the amount of monomer and the size of microlatex was also investigated. It has been found that the size of microlatex particles could be controlled by changing the amount of monomer. (C) 2002 Elsevier Science B.V. All rights reserved.

Effect of Rock Mass Structure and Block Size on the Slope Stability-Physical Modeling and Discrete Element Simulation

This paper studies the stability of jointed rock slopes by using our improved three-dimensional discrete element methods (DEM) and physical modeling. Results show that the DEM can simulate all failure modes of rock slopes with different joint configurations. The stress in each rock block is not homogeneous and blocks rotate in failure development. Failure modes depend on the configuration of joints. Toppling failure is observed for the slope with straight joints and sliding failure is observed for the slope with staged joints. The DEM results are also compared with those of limit equilibrium method (LEM). Without considering the joints in rock masses, the LEM predicts much higher factor of safety than physical modeling and DEM. The failure mode and factor of safety predicted by the DEM are in good agreement with laboratory tests for any jointed rock slope.

Size Effect and Geometrical Effect of Polycrystals and Thin Film/Substrate System in Micro-indentation Test

Micro-indentation test at scales on the order of sub-micron has shown that the measured hardness increases strongly with decreasing indent depth or indent size, which is frequently referred to as the size effect. Simultaneously, at micron or sub-micron scale, the material microstructure size also has an important influence on the measured hardness. This kind of effect, such as the crystal grain size effect, thin film thickness effect, etc., is called the geometrical effect by here. In the present research, in order to investigate the size effect and the geometrical effect, the micro-indentation experiments are carried out respectively for single crystal copper and aluminum, for polycrystal aluminum, as well as for a thin film/substrate system, Ti/Si3N4. The size effect and geometrical effect are displayed experimentally. Moreover, using strain gradient plasticity theory, the size effect and the geometrical effect are simulated. Through comparing experimental results with simulation results, length-scale parameter appearing in the strain gradient theory for different cases is predicted. Furthermore, the size effect and the geometrical effect are interpreted using the geometrically necessary dislocation concept and the discrete dislocation theory. Member Price: $0; Non-Member Price: $25.00

Effect of Particle Size on the Formation of Adiabatic Shear Band In Particle Reinforced Metal Matrix Composites

In this paper, the effect of particle size on the formation of adiabatic shear band in 2024 All matrix composites reinforced with 15% volume fraction of 3.5, 10 and 20 mum SiC particles was investigated by making use of split Hopkinson pressure bar (SHPB). The results have demonstrated that the onset of adiabatic shear banding in the composites strongly depends on the particle size and adiabatic shear banding is more readily observed in the composite reinforced with small particles than that in the composite with large particles. This size dependency phenomenon can be characterized by the strain gradient effect. Instability analysis reveals that high strain gradient is a strong driving force for the formation of adiabatic shear banding in particle reinforced metal matrix composites (MMCp).

The Influence of Grain Size and Temperature on the mechanical Deformation of Nanocrystalline Materials: Molecular Dynamics Simulation

Nanocrystalline (nc) materials are characterized by a typical grain size of 1-100nm. The uniaxial tensile deformation of computer-generated nc samples, with several average grain sizes ranging from 5.38 to 1.79nm, is simulated by using molecular dynamics with the Finnis-Sinclair potential. The influence of grain size and temperature on the mechanical deformation is studied in this paper. The simulated nc samples show a reverse Hall-Petch effect. Grain boundary sliding and motion, as well as grain rotation are mainly responsible for the plastic deformation. At low temperatures, partial dislocation activities play a minor role during the deformation. This role begins to occur at the strain of 5%, and is progressively remarkable with increasing average grain size. However, at elevated temperatures no dislocation activity is detected, and the diffusion of grain boundaries may come into play.

A Study of Size-Dependent Microindentation

We recently proposed a strain gradient theory to account for the size dependence of plastic deformation at micron and submicron length scales. The strain gradient theory includes the effects of both rotation gradient and stretch gradient such that the rotation gradient influences the material character through the interaction between the Cauchy stresses and the couple stresses; the stretch gradient measures explicitly enter the constitutive relations through the instantaneous tangent modulus. Indentation tests at scales on the order of one micron have shown that measured hardness increases significantly with decreasing indent size. In the present paper, the strain gradient theory is used to model materials undergoing small-scale indentations. A strong effect of including strain gradients in the constitutive description is found with hardness increasing by a factor of two or more over the relevant range behavior. Comparisons with the experimental data for polycrystalline copper and single crystal copper indeed show an approximately linear dependence of the square of the hardness, H 2, on the inverse of the indentation depth, 1/h, I.e., H-2 proportional to 1/h, which provides an important self-consistent check of the strain gradient theory proposed by the authors earlier.

The Size-Dependent Elastic Properties of Nanofilms with Surface Effects

Size-dependent elastic constants are investigated theoretically with reference to a nanoscale single-crystal thin film. A three-dimensional _3D_ model is presented with the relaxation on the surface of the nanofilm taken into consideration. The constitutive relation of the 3D model is derived by using the energy approach, and analytical expressions for the four nonzero elastic constants of the nanofilm are obtained. The size effects of the four elastic constants are then discussed, and the dependence of these elastic constants on the surface relaxation and the ambiguity in the definition of the thickness of the nanofilm are also analyzed. In addition, the elastic moduli of the nanofilm in two kinds of plane problem are obtained and discussed in the case of a special boundary condition.

Size Dependent Nanoindentation of a Soft Film on a Hard Substrate

Nanoindentation experiments on Al/glass systems show that, as the indentation depth increases, the hardness decreases during a shallow indentation, and increases when the indenter tip approaches the film–substrate interface. We associate the rise in hardness during two stages with the strong strain gradient effects, the first stage is related with the small scale effects and the second stage with the strain gradient between the indenter and the hard substrate. Using the strain gradient theory proposed by Chen and Wang and the classical plasticity theory, the observed nanoindentation behavior is modeled and analyzed by means of the finite element method, and it is found that the classical plasticity cannot explain the experiment results but the strain gradient theory can describe the experiment data at both shallow and deep indentation depths very well. The results prove that both the strain gradient effects and substrate effects exist in the nanoindentation of the film–substrate system.

Size Effects in Micro-bending Deformation of MEMS Devices Based on the Discrete Dislocation Theory

In the present research, the discrete dislocation theory is used to analyze the size effect phenomena for the MEMS devices undergoing micro-bending load. A consistent result with the experimental one in literature is obtained. In order to check the effectiveness to use the discrete dislocation theory in predicting the size effect, both the basic version theory and the updated one are adopted simultaneously. The normalized stress-strain relations of the material are obtained for different plate thickness or for different obstacle density. The prediction results are compared with experimental results.

Size Effect and Geometrical Effect of Solids in Micro-Indentation Test

Micro-indentation tests at scales of the order of sub-micron show that the measured hardness increases strongly with decreasing indent depth or indent size, which is frequently referred to as the size effect. At the same time, at micron or sub-micron scale, another effect, which is referred to as the geometrical size effects such as crystal grain size effect, thin film thickness effect, etc., also influences the measured material hardness. However, the trends are at odds with the size-independence implied by the conventional elastic-plastic theory. In the present research, the strain gradient plasticity theory (Fleck and Hutchinson) is used to model the composition effects (size effect and geometrical effect) for polycrystal material and metal thin film/ceramic substrate systems when materials undergo micro-indenting. The phenomena of the "pile-up" and "sink-in" appeared in the indentation test for the polycrystal materials are also discussed. Meanwhile, the micro-indentation experiments for the polycrystal Al and for the Ti/Si_3N_4 thin film/substrate system are carried out. By comparing the theoretical predictions with experimental measurements, the values and the variation trends of the micro-scale parameter included in the strain gradient plasticity theory are predicted.