Molecular determination of oxytetracycline-resistant bacteria and their resistance genes from mariculture environments of China

Aims: To assess the diversity of antibiotic-resistant bacteria and their resistance genes in typical maricultural environments. Methods nand Results: Multidrug-resistant bacteria and resistance genes from a mariculture farm of China were analysed via cultivation and polymerase chain reaction (PCR) methods. Oxytetracycline (OTC)-resistant bacteria were abundant in both abalone and turbot rearing waters, accounting for 3.7% and 9.9% of the culturable microbes. Multidrug resistance was common, with simultaneous resistance to OTC, chloramphenicol and ampicillin the most common resistance phenotype. 16S rDNA sequence analyses indicate that the typical resistant isolates belonged to marine Vibrio, Pseudoalteromonas or Alteromonas species, with resistance most common in Vibrio splendidus isolates. For OTC resistance, tet(A), tet(B) and tet(M) genes were detected in some multidrug-resistant isolates, with tet(D) being the most common molecular determinant. For chloramphenicol resistance, cat II was common, and floR was also detected, especially in marine Pseudoalteromonas strains. Conclusions: There is the risk of multidrug-resistant bacteria contamination in mariculture environments and marine Vibrio and Pseudoalteromonas species serve as reservoirs of specific antibiotic resistance determinants. Significance and Impact of the Study: This paper and similar findings from Korea and Japan indicate the potential for widespread distribution of antibiotic resistance genes in mariculture environments from the East Asian region of the world.

Molecular characterizations of chloramphenicol- and oxytetracycline-resistant bacteria and resistance genes in mariculture waters of China

In order to gain an understanding of the diversity and distribution of antimicrobial-resistant bacteria and their resistance genes in maricultural environments, multidrug-resistant bacteria were screened for the rearing waters from a mariculture farm of China. Both abalone Haliotis discus hannai and turbot Scophthalmus maximus rearing waters were populated with abundant chloramphenicol-resistant bacteria. These bacteria were also multidrug resistant, with Vibrio splendidus and Vibrio tasmaniensis being the most predominant species. The chloramphenicol-resistance gene cat II, cat IV or floR could be detected in most of the multidrug-resistant isolates, and the oxytetracycline-resistance gene tet(B), tet(D), tet(E) or tet(M) could also be detected for most of the isolates. Coexistence of chloramphenicol- and oxytetracycline-resistance genes partially explains the molecular mechanism of multidrug resistance in the studied maricultural environments. Comparative studies with different antimicrobial agents as the starting isolation reagents may help detect a wider diversity of the antimicrobial-resistant bacteria and their resistance genes. (C) 2009 Elsevier Ltd. All rights reserved.

P-糖蛋白的研究进展

P-糖蛋白是一类能量依赖性的转运蛋白,能将许多结构不同的化合物逆向转运出细胞。P-糖蛋白的过表达与肿瘤细胞的多药耐药性(Multidrug Resistance,MDR)密切相关,是导致肿瘤化疗失败的主要原因。随着对MDR机制认识的深入,已针对P-糖蛋白的结构设计出多种形式的MDR逆转药物。近年研究发现,P-糖蛋白广泛存在于正常的组织和器官,参与药物和内、外源毒素的吸收、分布和排泄,行使解毒和防御保护的功能。因此,通过转植P-糖蛋白基因可有效地降低经济鱼类、虾等水产品和经济作物中有毒污染物的积累,对保护人

千金子和暖地大叶藓的化学成分研究

本论文由三部分共4 章组成。第一部分阐述了大戟科大戟属传统中药千金子（Euphorbia lathyris L.）化学成分、生物学活性以及千金子化学成分的HPLC、UPLC-MS、GC-MS 分析成果。第二部分介绍了民族药材暖地大叶藓（Rhodobryum giganteum (Schwaegr.) Par.）的化学成分研究和结构鉴定。第三部分概述了大戟属 植物中大环二萜酯的研究进展。 第一章包括1－3 节。在第1, 2 节中报道了千金子（Euphorbia lathyris L.）95% 乙醇提取物的化学成分分离鉴定。我们采用正、反相硅胶柱层析、重结晶等各种分离方法，凭借MS、IR、NMR、X-ray 等现代仪器手段,从中共分离鉴定22 个化合物。其中8 个是高活性化合物前体-续随子烷型大环二萜及3 个巨大戟烷型二萜，还有香豆素、生物碱、甾体等类型，其中完成对5 个大环二萜酯构型的确认，对2 个二萜酯构型进行了修正。第3 节中介绍对千金子化学成分的细胞毒性、α-葡萄糖苷酶抑制活性、P-gp 表达抑制活性的模型筛选结果。 第二章包括3 节，第1 节报道不同产地千金子高效液相色谱定量分析结果。第2 节介绍了各大环二萜酯的HPLC-MS/MS 的分析结果，并且对其质谱裂解规律、UPLC-MS 快速鉴定方法做了进一步讨论。第3 节介绍了千金子挥发油成分分析。采用传统水蒸气蒸馏方法提取千金子中的挥发油，并经气相色谱－质谱联用（GC-MS）技术共分离鉴定出 49 个化合物，占挥发油总量的90.48％。 第三章包括1, 2 两节，第1 节报道了暖地大叶藓化学成分。采用正、反相硅胶，凝胶柱层析等各种分离方法和MS、IR、NMR 等解析手段，共分离鉴定10个化合物，其中一个环肽化合物为新化合物。第2 节介绍了暖地大叶藓挥发油成分分析，共分离鉴定出 52 个化合物，占其挥发油总量的85.67％。 第四章概述了大戟科大戟属植物中大环二萜酯的研究进展。 This dissertation consists of three parts. In the first part, it is elaborated that the phytochemical investigation from the traditional Chinese medicine: seeds of Euphorbia lathyris L.. Biological activity and constituents analysis by HPLC、UPLC-MS、GC-MS were reported. In the second part, it is discussed that the chemical constituents were isolated and identificated from minority nationalitical herb－Rhodobryum giganteum (Schwaegr.) Par.. The third part is a review about the progress of studies on macrocyclic diterpenes from Euphorbia. The first part is composed of 1－3 sections. The section 1and 2 is focused on the isolation and identification of chemical constituents from seeds of E. lathyris. 22 compounds were isolated from the seeds of E. lathyris. by isolation methods of column chromatography (silica gel, including reversed phase) and recrystallisation on the basis of spectroscopic methods including IR, MS, NMR and X-ray. In 8 macrocyclic and 3 ingenane diterpenes, the relative configuration of 5 macrocyclic diterpenes were confirmed, in which 2 were amended. In the third section, cell cytotoxic activity, restraining activity of α-Glucosidase and multidrug resistance (MDR) reversing activity about P-gp were tested. 5 potential revsering reagents were found. The second part is composed of 1－3 sections. In first section it is described that the quality of the chemical constituents of E. lathyris from 5 sources , which were analyzed by high-performance liquid chromatography. In addition, the fractionation rules of some macrocyclic diterpenes were discussed and Ultra Performance Liquid Chromatography/ electrospray ionization mass spectrometry (UPLC-MS) was applied for quick determination of compounds in the second section. In the third section, chemical analysis of the essential oil from seeds of E. lathyris by GC-MS were reported. The essential oil from the seeds of E. lathyris L. in Sichuan was extracted by steam distillation and 49 compounds were isolated and identified from the essential oil by gas chromatography-mass spectrometer (GC-MS). These compounds are accounted for 90.46% of the total essential oil. The second part, including section 4 and 5, is about the phytochemical investigation of R. giganteum. In the former section, ten compounds were isolated and identified. Among them, a new peptide was characterized by spectroscopic analysis including IR, MS and NMR. In the other section, 52 compounds were isolated and identified from the essential oil by gas chromatography-mass spectrometer (GC-MS). These compounds are accounted for 85.67% of the total essential oil. The third part is a review about the progress of studies on macrocyclic diterpenes from Euphorbia.

迟缓爱德华氏菌两种保护性抗原及AcrAB耐药系统的分析

迟缓爱德华氏菌是危害水产养殖业发展的重要病原菌之一，因而其免疫防治研究具有重要意义。论文分析了9种具有保护潜能的迟缓爱德华氏菌蛋白，经过牙鲆免疫保护实验，筛选出EseD和Et18两种有显著性保护效应的抗原。为了提高其保护效应，论文使用基因工程技术将这两种抗原融合到一起，构建重组融合蛋白EEH。结果表明，融合蛋白EEH保护效应较EseD和Et18分别免疫时有所提高。ELISA和Western blotting 结果显示，三种蛋白都能诱导牙鲆产生特异抗体。这些研究为开发迟缓爱德华氏菌疫苗提供了理论基础。 论文克隆分析了迟缓爱德华氏菌AcrAB耐药系统，采用定点突变确定了acrAB、acrR的启动子序列和AcrR在acrAB启动子的结合位点。启动子分析显示，AcrR对acrAB启动子有300倍抑制效应, 对acrR启动子有3倍抑制效应。定点突变显示，K39和R45对AcrR功能具重要性；缺失突变表明，N端205个氨基酸残基是其功能必需。实验筛选出Acriflavine、Ethidium Bromide、Methyl Viologen、Sodium Dodecyl Sulfate等四种AcrR诱导物。分析AcrR过量表达菌株结果显示，其耐药性、生长状况和毒力水平较阴性对照组降低。这些研究加深了我们对迟缓爱德华氏菌耐药机制及其与毒力关系的了解。

Microstructure and wear resistance of in situ TiCp composite coating by laser cladding

A new in situ method was realized by one step laser cladding to produce Ni-base alloy composite coating reinforced by in situ reacted and gradiently distributed TiCp particles. The submicron TiCp particles were formed and uniformly distributed because of the in situ reaction and trapping effect under the rapid solidification condition. And, TiCp particles were of gradient distribution on a macro scale and their volume fraction increased from 1.86% at the layer/substrate interface to a maximum 38.4% at the surface of the layer. Furthermore, the in situ generated TiCp/gamma-Ni interfaces were free from deleterious surface reactions. Additionally, the clad coating also revealed a high microhardness of gradient variation with the layer depth and the superior abrasive wear resistance.

Application of Electrical Resistance Tomography System to Monitor Gas/Liquid Two-Phase Flow in a Horizontal Pipe

The Electrical Resistance Tomography (ERT) technique possesses great potential in monitoring widely exiting industrial two/multi-phase flow. For vertical pipe flow and inclined pipe flow, some application studies with exciting results have been reported, but there is rarely a paper regarding the application of ERT to horizontal gas/liquid pipe flow. This paper addresses this issue and proposes a smart method, Liquid Level Detection method, to conventional ERT system. The enhanced ERT system using the new method can monitor horizontal pipe flow effectively and its application is no longer restricted by the flow conditions. Some experimental results from monitoring an air/water slug pipe flow are presented.

Characterization of Air-Water Two-Phase Vertical Flow by Using Electrical Resistance Imaging

The characterization of air-water two-phase vertical flow in a 12 m flow loop with 1.5 m of vertical section is studied by using electrical resistance tomography (ERT). By applying a fast data collection to a dual-plane ERT sensor and an iterative image reconstruction algorithm, relevant information is gathered for implementation of flow characteristics, particularly for flow regime recognition. A cross-correlation method is also used to interpret the velocity distribution of the gas phase on the cross section. The paper demonstrates that ERT can now be deployed routinely for velocity measurements and this capability will increase as faster measurement systems evolve.

Effect of diffusion on coating microstructure and oxidation resistance of aluminizing steel

The effect of diffuse treatment on coating microstructure and oxidation resistance at high-temperature of hot-dip aluminum were studied by means of TEM, SEM and XRD. The results show that, the diffusion temperature has significant effect on structure of coatings and its oxidation resistance. After diffusion at 750 degreesC, the coating consists of thick outer surface layer (Fe2Al5+ FeAl2), thin internal layer (FeAl + stripe FeAl2), and its oxidation resistance is poor. After diffusion at 950 degreesC, the outer surface layer is composed of single FeAl2 phase, the internal layer is composed of FeAl phase, and its oxidation resistance declines due to the occurrence of early stage internal oxidation cracks in the coating. After diffusion at 850 degreesC, the outer surface layer becomes thinner and consists of FeAl2 Fe2Al5(small amount), the internal layer becomes thicker and consists of FeAl+spherical FeAl2, and the spheroidized FeAl2 phase in the internal layer and its existing in FeAl phase steadily improve the oxidation resistance of the coating.

Microstructure and high-temperature wear and oxidation resistance of laser clad gamma/W2C/TiC composite coatings on gamma-TiAl intermetallic alloy

There are very strong interests in improving the high-temperature wear resistance of the y-TiAl intermetallic alloy, especially when applied as tribological moving components. In this paper, microstructure, high-temperature dry sliding wear at 600 degrees C and isothermal oxidation at 1000 degrees C on ambient air of laser clad gamma/W2C/TiC composite coatings with different constitution of Ni-Cr-W-C precursor mixed powders on TiAl alloy substrates have been investigated. The results show that microstructure of the laser fabricated composite coatings possess non-equilibrium microstructure consisting of the matrix of nickel-base solid solution gamma-NiCrAl and reinforcements of TiC, W2C and M23C6 carbides. Higher wear resistance than the original TiAl alloy is achieved in the composite coatings under high-temperature wear test conditions. However, the oxidation resistance of the laser clad gamma/W2C/TiC composite coatings is deceased. The corresponding mechanisms resulting in the above behaviors of the laser clad composite coatings are discussed. (c) 2006 Elsevier B.V. All rights reserved.

Effects of contact resistance on thermal-conductivity of composite media with a periodic structure

The thermal conductivity of periodic composite media with spherical or cylindrical inclusions embedded in a homogeneous matrix is discussed. Using Green functions, we show that the Rayleigh identity can be generalized to deal with thermal properties ot these systems. A new calculating method for effective conductivity of composite media is proposed. Useful formulae for effective thermal conductivity are derived, and meanings of contact resistance in engineering problems are explained.

Measurements of Flow Patterns and Velocities of Gas -Water Two -Phase Flows Using Electrical Resistance Imaging

This paper presents a measurement of flow patterns and flow velocities of gas-water two-phase flows based on the technique of electrical resistance tomography (ERT) in a 40m horizontal flow loop. A single-plane and dual-plane ERT sensor on conductive ring technique were used to gather sufficient information for the implementation of flow characteristics particularly flow pattern recognition and air cavity velocity measurement. A fast data collection strategy was applied to the dual-plane ERT sensor and an iterative algorithm was used for image reconstruction. Results, in respect to flow patterns and velocity maps, are reported.

MEASUREMENT OF SOLID SLURRY FLOW VIA CORRELATION OF ELECTROMAGNETIC FLOW METER, ELECTRICAL RESISTANCE TOMOGRAPHY AND MECHANISTIC MODELLING

The study presented here was carried out to obtain the actual solids flow rate by the combination of electrical resistance tomography and electromagnetic flow meter. A new in-situ measurement method based on measurements of the Electromagnetic Flow Meters (EFM) and Electrical Resistance Tomography (ERT) to study the flow rates of individual phases in a vertical flow was proposed. The study was based on laboratory experiments that were carried out with a 50 mm vertical flow rig for a number of sand concentrations and different mixture velocities. A range of sand slurries with median particle size from 212 mu m to 355 mu m was tested. The solid concentration by volume covered was 5% and 15%, and the corresponding density of 5% was 1078 kg/m(3) and of 15% was 1238 kg/m(3). The flow velocity was between 1.5 m/s and 3.0 m/s. A total of 6 experimental tests were conducted. The equivalent liquid model was adopted to validate in-situ volumetric solids fraction and calculate the slip velocity. The results show that the ERT technique can be used in conjunction with an electromagnetic flow meter as a way of measurement of slurry flow rate in a vertical pipe flow. However it should be emphasized that the EFM results must be treated with reservation when the flow pattern at the EFM mounting position is a non-homogenous flow. The flow rate obtained by the EFM should be corrected considering the slip velocity and the flow pattern.