Indentation Creep Behavior in Ce-Based Bulk Metallic Glasses at Room Temperature

The room temperature creep behaviors of Ce-based bulk metallic glasses were examined by the use of nanoindentation. The creep rate and creep rate sensitivity of Ce-based BMGs were derived from indentation creep curves. The low creep rate sensitivity of Ce-based BMGs indicates that the room temperature creep is dominated by localized shear flow. The experimental creep curves can be described by a generalized Kelvin model. Furthermore, the creep retardation spectrum is calculated for the Ce-based metallic glasses. The results showed that creep retardation spectrum consists of two relatively separated peaks with the well defined characteristic relaxation times.

Strain Rate Dependence of Plastic Flow in Ce-based Bulk Metallic Glass During Nanoindentation

The strain rate dependence of plastic deformation of Ce60Al15CU10Ni15 bulk metallic glass was studied by nanoindentation. Even though the ratio of room temperature to the glass transition temperature was very high (0.72) for this alloy, the plastic deformation was dominated by shear banding under nanoindentation. The alloy exhibited a critical loading rate dependent serrated flow feature. That is, with increasing loading rate, the alloy exhibited a transition from less prominent serrated flow to pronounced serrated flow during continuous loading but from serrated to smoother flow during stepped loading.

An Improved Ce/Se Scheme And Its Application To Detonation Propagation

An improved two-dimensional space-time conservation element and solution element ( CE/ SE) method with second-order accuracy is proposed, examined and extended to simulate the detonation propagations using detailed chemical reaction models. The numerical results of planar and cellular detonation are compared with corresponding results by the Chapman-Jouguet theory and experiments, and prove that the method is a new reliable way for numerical simulations of detonation propagation.

Plastic deformation in Ce-based bulk metallic glasses during depth-sensing indentation

The deformation behavior and the effect of the loading rate on the plastic deformation features in (numbers indicate at.%) Ce60Al15Cu10Ni15, Ce65Al10Cu10Ni10Nb5, Ce68Al10Cu20Nb2, and Ce70Al10Cu20 bulk metallic glasses (BMGs) were investigated through nanoindentation. The load-displacement (P-h) curves of Ce65Al10Cu10Ni10Nb5, Ce68Al10Cu2, and Ce70Al10Cu20 BMGs exhibited a continuous plastic deformation at all studied loading rate. Whereas, the P-h curves of Ce60Al15Cu10Ni15 BMG showed a quite unique feature, i.e. homogeneous plastic deformation at low loading rates, and a distinct serrated flow at high strain rates. Moreover, a creep deformation during the load holding segment was observed for the four Ce-based BMGs at room temperature. The mechanism for the appearance of the "anomalous" plastic deformation behavior in the Ce-based BMGs was discussed. (c) 2006 Elsevier B.V. All rights reserved.

Simple phenomenological determination of contact stiffness and elastic modulus of Ce-based bulk metallic glasses through nanoindentation

The viscoelastic deformation of Ce-based bulk metallic glasses (BMGs) with low glass transition temperature is investigated at room temperature. Contact stiffness and elastic modulus of Ce-based BMGs cannot be derived using the conventional Oliver-Pharr method [W. C. Oliver and G. M. Pharr, J. Mater. Res. 7, 1564 (1992)]. The present work shows that the time dependent displacement of unloading segments can be described well by a generalized Kelvin model. Thus, a modified Oliver-Pharr method is proposed to evaluate the contact stiffness and elastic modulus, which does, in fact, reproduce the values obtained via uniaxial compression tests. (c) 2007 American Institute of Physics.

Ce基大块非晶合金在纳米压人过程中的变形行为

利用纳米压入技术研究了Ce基大块非晶合金的变形行为,以及加载速率对塑性变形行为的影响规律.结果表明,Ce基大块非晶合金在纳米压入过程中表现出的变形行为与其他体系大块非晶有显著差别.Ce60Al15Cu10Ni15合金在低加载速率下为连续的塑性变形,在高加载速率下表现出显著的锯齿流变特征;而Ce65Al10Cu10Ni10Nb5合金,在所研究的加载速率范围内均为连续的塑性变形．但是,这两种合金都出现了室温蠕变现象．另外,探讨了Ce基大块非晶合金的反常塑性变形行为的产生机理．

二维CE/SE算法改进及其高阶精度格式

通过提出一种新的守恒元和解元划分方式对二维时-空守恒元解元算法(CE/SE)进行了改进,推导了改进CE/SE算法的一、二阶精度计算格式,并给出了更高阶精度计算格式的构造方法。利用得到的改进CE/SE格式对激波反射问题、后台阶扰流问题及隔墙坑道传播问题进行了数值模拟。数值结果表明,对CE/SE算法的改进是成功的。改进CE/SE算法有诸多优点,值得在数值模拟中推广使用。

基于CE/SE方法的二维Euler型多物质流体弹塑性问题计算

将CE/SE方法推广到二维固体流体弹塑性问题的数值计算,同时结合杂交粒子水平集方法追踪物质界面和合适的边界条件,提出一套完整的二维Euler型流体弹塑性计算方案.通过长钨杆侵彻装甲钢实验的数值模拟,对方法的精度和有效性进行验证.

时-空守恒元解元(CE/SE)数值方法及其应用

<正>时-空守恒元解元方法(space-timeconservationelementandsolutionelementmethod,CE/SE)是近年来兴起的一种全新的守恒方程型方程计算方法。它最早由NASALewis研究中心的Chang于1995年提出来的。这种方法从根本上区别于传统的方法:它将时间和空间统一起来同等对待;利用守恒

时—空守恒元解元(CE/SE)方法简述

时-空守恒元解元方法是近年来兴起的一种全新的高分辨率守恒方程型方程计算方法。它具有物理概念清晰,计算精度高和格式构造简单等优点,是一种具有广阔发展前景的计算流体力学方法。本文介绍了CE/SE方法的基本理论、格式构造、发展历史、应用情况和最新进展,并指出了应解决的问题和发展方向。

An Improved Ce/Se Scheme For Multi-Material Elastic-Plastic Flows And Its Applications

In this paper, a new definition of SE and CE, which is based on the hexahedron mesh and simpler than Chang's original CE/SE method (the space-time Conservation Element and Solution Element method), is proposed and an improved CE/SE scheme is constructed. Furthermore, the improved CE/SE scheme is extended in order to solve the elastic-plastic flow problems. The hybrid particle level set method is used for tracing the interfaces of materials. Proper boundary conditions are presented in interface tracking. Two high-velocity impact problems are simulated numerically and the computational results are carefully compared with the experimental data, as well as the results from other literature and LS-DYNA software. The comparisons show that the computational scheme developed currently is clear in physical concept, easy to be implemented and high accurate and efficient for the problems considered. (C) 2008 Elsevier Ltd. All rights reserved.

SUPER CE/SE的新算法及其在爆炸力学中的应用

研究了SUPER CE/SE的新算法及其在爆炸力学中的应用. 算法和模型方面, 主要包括改进CE/SE算法、快速杂交粒子水平集方法、常用化学反应模型和两流体模型. 使用上述算法和模型, 对激波楔面反射、爆炸焊接、爆轰波胞格结构和气液两相爆轰问题进行了数值模拟. 数值结果表明, 该文采用的算法具有计算精度高、应用范围广和兼容性强等优点, 可广泛应用于爆炸力学的数值研究.