The rheological and extrusion behaviour of blends based on phenolphthalein poly(ether-ether-sulfone) and thermotropic liquid crystalline polymer

A novel engineering thermoplastic, phenolphthalein poly (ether-ether-sulfone) (PES-C) was blended with a commercial thermotropic liquid crystalline polymer(TLCP), Vectra A950, up to 30 weight percent of TLCP. A rheometrics dynamic spectrometer (RDS-I) and a CEAST capillary rheometer, a rheoscope 1000 were employed to investigate the melt rheology and extrusion behaviour at both the low and high shearing rates. The morphologies of the blends under different shearing were observed with a scanning electron microscope(SEM) and correlated to the observed rheology. The principal normal stress differences measured with cone-and-plate geometry give a temperature-independent correlation for both blend and PES-C when they are plotted against shear stress. But the extrudate swell of the blends showed a strong temperature dependence at each shear stress. The concentration dependence of extrudate swell shows a contrary behaviour to that of the inorganic filled system. A reasonable hypothesis based on the relaxation and disorientation of TLCP during flowing in the capillary and exiting was given to explain it. The melt fracture was checked after extrusion from capillary and was discussed.

THE EFFECT OF RADIATION-INDUCED CROSS-LINKING ON THE RELAXATION OF TAUT TIE MOLECULES DURING ANNEALING OF DRAWN LDPE

Shrinkage, retractive stress, and infrared dichroism of the drawn low-density polyethylene (LDPE) as-drawn and irradiated by Co-60-ray have been measured under different annealing conditions. The shrinkage and the disorientation of the irradiated sample was undergone more rapidly than that of unirradiated one as the temperature was continuously increased, surpassing a certain value, and a higher degree of shrinkage and disorientation was achieved finally for the irradiated sample when the samples were annealed with free ends. For the samples heated isothermally with fixed ends, the retractive stress went through a maximum and then attenuated to a limited value, and the degree of such a stress attenuation for the unirradiated sample was much more than that for the irradiated sample. These results show that the taut tie molecules (TTMs) in drawn PE can relax by the pulling of chain segments out of crystal blocks that they anchored in at elevated temperatures higher than the a transition and also by the displacing of microfibrils if the samples were annealed with free ends. The cross-links produced by irradiation prohibit the former process. It was further observed that the dependence of the average extinction coefficient of the band at 2016 cm-1 on that of the band at 1894 cm-1 is related to irradiation and annealing conditions, which has also been explained by the relaxation of TTMs and the function of irradiation-induced cross-linking on the relaxation.

运动与重定向时物-我、物-物空间表征的使用

Eight experiments tested how object array structure and learning location influenced the establishing and utilization of self-to-object and object-to-object spatial representations in locomotion and reorientation. In Experiment 1 to 4, participants learned either at the periphery of or amidst regular or irregular object array, and then pointed to objects while blindfolded in three conditions: before turning (baseline), after rotating 240 degrees (updating), and after disorientation (disorientation). In Experiment 5 to 8, participants received instruction to keep track of self-to-object or object-to-object spatial representations before rotation. In each condition, the configuration error, which means the standard deviation of the means per target object of the signed pointing errors, was calculated as the index of the fidelity of representation used in each condition. Results indicate that participants form both self-to-object and object-to-object spatial representations after learning an object-array. Object-array structure influences the selection of representation during updating. By default, object-to-object spatial representation is updated when people learned the regular object-array structure, and self-to-object spatial representation is updated when people learned the irregular object array. But people could also update the other representation when they are required to do so. The fidelity of representations will confine this kind of “switch”. People could only “switch” from a low fidelity representation to a high fidelity representation or between two representations of similar fidelity. They couldn’t “switch” from a high fidelity representation to a low fidelity representation. Leaning location might influence the fidelity of representations. When people learned at the periphery of object array, they could acquire both self-to-object and object-to-object spatial representations of high fidelity. But when people learned amidst the object array, they could only acquire self-to-object spatial representation of high fidelity, and the fidelity of object-to-object spatial representation was low.