Polarization Self-Modulation Phenomenon in a Free Oscillated Nd: YAG Laser

Polarization self-modulation effect in a free oscillated Nd:YAG laser is investigated after a quarter wave plate is introduced independently in the two positions of the cavity. As described in the previous experiments, the intensity components in the orthogonal directions are modulated with a period of the round-trip time or twice. Different pulse shapes reveal that the seed field from the spontaneous emission is not uniform and seems to be stochastic for each pulse.

Study on Post Foundation of Highway Medium Guardrail

目前高速公路中央分隔带波形梁护栏立柱的实际设置中,普遍存在着由于分隔带地基强度低于压实路基,护栏立柱承载能力偏低,护栏的防护性能达不到设计要求的问题。对粘性土地基中立柱的受力情况进行了分析,并对地基为压实土与回填土两种情况进行了对比,给出了中央分隔带中立柱地基的加固方案。

The Characterization Of Creep And Time-Dependent Properties Of Bulk Metallic Glasses Using Nanoindentation

Viscoelastic deformation and creep behavior of La- and Ce-based bulk metallic glasses (BMGs) with low glass transition temperature are investigated through nanoindentation at room temperature. Creep compliance and retardation spectra are derived to study the creep mechanism. The time-dependent displacement can be well described by a generalized Kelvin model. A modification is proposed to determine the elastic modulus from the generalized Kelvin model. The results are in excellent agreement with the elastic modulus determined by uniaxial compression tests. (c) 2007 Published by Elsevier B.V.

升温率和应变率对30CrMnSi拉伸强度的影响

报道了硬度HRC为20和40的两种30CrMnSi材料在100-900℃的力学性能及升温率、应变率和热处理条件对抗拉强度、屈服强度的影响。在低温区,材料性能随温度的升高,呈现缓慢下降,其数值与常温相差不多,热处理状态对该区影响甚大,升温率有一定影响; 在高温区,材料强度大大降低,其数值随温度变化不大,不同升温速率的影响及热处理状态影响消失; 在中温区,材料性能随温度升高呈现快速下降趋势,热处理状态对材料性能影响大,不同升温率对材料性能影响不大。

纤维增强复合材料界面的力学行为

研究材料的界面和表面的力学行为与破坏机理,是当代材料科学、力学、物理学的前沿课题之一,而复合材料界面问题更有其自身的特殊性和复杂性。本文结合笔者的研究工作重点讨论了纤维复合材料界面力学的共性问题,阐述了复合材料界面的性质、复合材料界面的力学模型和理论、界面力学表征的实验研究、界面损伤破坏机理、界面对复合材料力学性能的影响等5个方面。

液桥中不同Prandtl数流体的热毛细对流

本文研究从上面加热的液桥中不同 pr 数流体的热表面张力驱动对流。在 Ma 数相同的条件下,不同 pr 数流体液桥中的温度分布和流场结构定性相似,但定量结果不同。小pr数(pr<<1)流体液桥中的粘性边界层远小于热边界层,最大流函数所在位置向冷端偏移,有较大的流动速度。结果表明,Ma 数是描述这种流动的敏感参数。

有涨落效应的磁流体静力学关系

观测表明,在许多天体物理环境中,涨落场具有不可忽略的重要作用.本文在一阶光滑近似条件下,推导了普通湍流和随机波动两种条件下的磁流体静力学方程组,以及这些方程所要求的自洽性条件.在静力学问题中,涨落的洛伦茨力会对大尺度磁场位形有影响.具体研究这种影响对于解释观测的特征是十分必要的,特别是许多天体物理环境中,磁场(包括涨落磁场δB)是决定能量和动量平衡的重要因素.

Dislocations in the crystallites of nanocrystalline alpha-Fe - A molecular dynamics study

Molecular dynamics simulations are carried out in order to study the atomic structure of crystalline component, of nanocrystalline alpha-Fe when it is consolidated from small grains. A two-dimensional computational block is used to simulate the consolidation process. All the preset dislocations in the original grains glide out of them in the consolidation process, but new dislocations can generate when the grain size is large enough. It shows that dislocations exist in the consolidated material rather than in the original grains. Whether dislocations exist in the crystalline component of the resultant model nana-material depends upon grain size. The critical value of grain size for dislocation generation appears to be about 9 nm. This result agrees with experiments qualitatively.

爆轰驱动高焓激波膨胀管性能研究

介绍了中国科学院高温气体动力学实验室JF-16爆轰驱动高焓激波膨胀管的研制进展及其性能测试结果.性能研究主要测量了入射激波速度和压力曲线.根据入射激波速度,应用Mirels的黏性激波管理论计算了超高速试验气流的运动速度,然后应用Gaseq软件计算了试验气流的热力学参数.研究结果表明：在16.35 m长的JF-16激波膨胀管中获得了流速7000 m/s以上的稳定试验气流,试验时间为50～100μs,试验气流总焓30MJ/kg左右.

第十一届亚洲流体力学会议(11ACFM’2006)简介

<正>1会议概况由亚洲流体力学委员会(Asian Fluid Mechanics Com- mittee)主办,马来西亚工程师协会(The Institution of Engineers,Malaysia)承办的“第十一届亚洲流体力学会议’2006”(The Eleventh Asian Congress of Fluid Mechanics, 11ACFM’2006)于2006年5月22-25日在位于马来西亚首都吉隆坡市中心的Berjaya时代广场酒店会议中心(Ber- jaya Times Square Hotel&Convention Center)召开．会议的组织委员会由亚洲流体力学委员会和当地组委会组成．