SPME-HPLC法测定水中的酚类化合物

采用固相微萃取(SPME)高效液相色谱法(HPLC)同时测定了水中苯酚、4-硝基酚、3-甲基酚、2,4-二氯酚、2,4,6-三氯酚、五氯酚等六种酚类化合物的含量.采用ZORBOX SB-C18柱,以甲醇-1%乙酸水溶液为流动相进行梯度洗脱,流速为1.0 mL/min.紫外检测波长为254、280 nm.六种酚类化合物的检出限为0.31～1.90μg/L,加标回收率为88%～103%.该方法操作简单,能快速、准确地检测水中的酚类化合物.

利用HS-SPME-GC技术分析环境水样中超痕量的六氯苯,DDT及其代谢产物

利用顶空固相微萃取(HSSPME)和气相色谱检测技术,通过对三种不同的SPME萃取头(PDMS,PMPVS,PA)实验条件的优化,并参照液液萃取的方法,对水相中六氯苯,DDT及其代谢产物的萃取效果进行了比较.结果表明,SPME方法比液液萃取方法在检测限和回收率上有很大的提高,其中PDMS对检测六氯苯,DDT及其代谢产物的效果较其它两种萃取头好.

茉莉酸结构类似物的合成及其对银杏次生代谢的影响

茉莉酸类化合物是一种具有诱导植物次生代谢，抵抗外来侵害，提高植物抗逆防御性等重要作用的植物激素，主要包括茉莉酸（JA）、茉莉酸甲酯（MeJA）及其异亮氨酸衍生物等。茉莉酸的化学合成已报道有十几种之多，但都还无法实现工业化生产，满足农业需求。 本文以α-羧基肉桂酸为起始原料，经过加氢还原、AlCl3-NaCl离子液体中的分子内F-C酰基化反应，HATU催化下与异亮氨酸结合三步反应，合成了一种茉莉酸类似物吲哚异亮氨酸甲酯结合物（Ind-IleMe），总收率约70 %。 用合成的Ind-IleMe、coronalon及MeJA对银杏叶进行诱导，银杏叶经盐酸甲醇溶液加热水解提取黄酮苷元，HPLC检测发现，经诱导后的银杏叶与对照相比银杏黄酮含量均有所增加，最高可诱导银杏叶黄酮含量增长15%—20%，最高诱导浓度coronalon 最低，为1 μmol/L，Ind-IleMe是10 μmol/L，MeJA的诱导浓度最高，大于等于100 μmol/L。 对MeJA诱导后银杏叶的生理生化中几个重要指标进行了测定，发现经诱导后SOD、MDA、PAL、蛋白活性或含量相对升高，叶绿素、可溶性糖含量相对降低，这与MeJA诱导提高银杏叶的逆境防御及次生代谢有关。 在植物的次生代谢中，挥发性气体（VOCs）具有防御草食动物及实现同种及不同种植物间信息交流的重要作用。本文应用自组装的炭阱吸附装置和固相微萃取（SPME）来收集诱导后的银杏叶、利马豆及三种酒中的挥发物，GC-MS检测进行定性定量分析，发现诱导后的银杏叶释放出更多的挥发性有机物，主要是石竹烯等一些参与植物防御机制的倍半萜类，通过对比炭阱吸附和SPME在挥发物的收集上，发现炭阱吸附具有吸附效率更高、样品可短期保存、重复进样分析、可定量等优越性，因此具有很好的发展前景。

杯[4]芳烃顶空固相微萃取-气相色谱法快速分析环境样品中的多氯联苯

本文以多氯联苯(PCBs)模拟水样为实验样品,优化了杯[4]芳烃探头顶空固相微萃取(HS SPME)的分析条件,并将杯[4]芳烃探头和商用PDMS探头对PCBs的萃取效果进行了比较。利用杯[4]芳烃 HS SPME法与USEPA608法同时测定了模拟水样和典型污染地区环境样品中的多氯联苯。研究结果表明:杯[4]芳烃SPME探头对样品中高氯代PCBs的萃取效果优于商用PDMS探头;杯[4]芳烃 HS SPME和USEP A608法对同一样品的检测结果一致;该法对水样中PCBs的检出限达1～6ng/L,比US

微囊藻毒素的提取与分析研究进展

本文简介了微囊藻毒素的形成、分子结构、危害及分析研究微囊藻毒素意义 ,然后从藻毒素样品的预处理、提取、分离和分析四个方面详细介绍了微囊藻毒素的提取与分析方法现状和最新进展 ,并客观评价了目前提取和分析藻毒素的各种方法 ,指出了其优缺点。在实验时 ,要根据实验的要求 ,进行不同方式的组合 ,进而达到满意的结果。以后随着性能更好的萃取头涂层材料的出现 ,SPME-HPLC联用技术在藻毒素分析检测领域将发挥更大的作用。

固相微萃取与色谱联用方法分析水中12种有机氯化合物

运用顶空固相微萃取与色谱联用方法(HS-SPME-GC)对水中的残留有机氯化合物进行了分析.对影响HS-SPME-GC分析灵敏度的各种实验因素如涂层种类、萃取温度、平衡时间、离子浓度等进行了讨论,并将该方法与固相萃取法(SPE)、液液萃取法(LLE)作了对比;同时考察了常见环境共存污染物直链烷基苯磺酸钠(LAS)对几种方法的影响.

Headspace solid-phase microextraction with novel sol-gel permethylated-beta-cyclodextrin/hydroxyl-termination silicone oil fiber for determination of polybrominated diphenyl ethers by gas chromatography-mass spectrometry in soil

A simple, sensitive, and accurate method for determination of polybrominated diphenyl ethers (PBDEs) in soil has been developed based on headspace solid-phase microextraction (HS-SPME) followed by gas chromatography-mass spectrometry (GC-MS). Permethylated-beta-cyclodextrin/hydroxyl-termination silicone oil (PM-beta-CD/OH-TSO) fiber was first prepared by sol-gel technology and employed in SPME procedure. By exploiting the superiorities of sot-gel coating technique and the advantages of the high hydrophobic doughnut-shaped cavity of PM-beta-CD, the novel fiber showed desirable operational stability and extraction ability. After optimization on extraction conditions like water addition, extraction temperature, extraction time, salts effect, and solvents addition, the method was validated in soil samples, achieving good linearity (r>0.999), precision (R.S.D. < 10%), accuracy (recovery>78%), and detection limits (S/N =3) raging from 13.0 to 78.3 pg/g. (c) 2007 Published by Elsevier B.V.

Analysis of estrogens in environmental waters using polymer monolith in-polyether ether ketone tube solid-phase microextraction combined with high-performance liquid chromatography

A simple, rapid and sensitive on-line method for simultaneous determination of four endocrine disruptors (17 beta-estradiol, estriol, bisphenol A and 17 alpha-ethinylestradiol) in environmental waters was developed by coupling in-tube solid-phase microextraction (SPME) to high-performance liquid chromatography (HPLC) with fluorescence detection (FLD). A poly(acrylamide-vinylpyridine-NAP-methylene bisacrylamide) monolith, synthesized inside a polyether ether ketone (PEEK) tube, was selected as the extraction medium. To achieve optimum extraction performance, several parameters were investigated, including extraction flow-rate, extraction time, and pH value, inorganic salt and organic solvent content of the sample matrix. By simply filtered with nylon membrane filter and adjusting the pH of samples to 6.0 with phosphoric acid, the sample solution then could be directly injected into the device for extraction. Low detection limits (S/N = 3) and quantification limits (S/N = 10) of the proposed method were achieved in the range of 0.006-0.10 ng/mL and 0.02-0.35 ng/mL from spiked lake waters, respectively. The calibration curves of four endocrine disruptors showed good linearity ranging from quantification limits to 50 ng/mL with a linear coefficient R-2 value above 0.9913. Good method reproducibility was also found by intra- and inter-day precisions, yielding the RSDs less than 12 and 9.8%, respectively. Finally, the proposed method was successfully applied to the determination of these compounds in several environmental waters. (c) 2006 Elsevier B.V. All rights reserved.

A solid-phase microextraction fiber coated with diglycidyloxycalix[4]arene yields very high extraction selectivity and sensitivity during the analysis of chlorobenzenes in soil

A novel fiber coated with novel sol-gel (5,11,17,23-tetra-tert-butyl-25,27-dihydroxy-26,28-diglycidyloxycalix[4]arene/hydroxy-terminated silicone oil; diglycidyloxy-C[4]/OH-TSO) was prepared for use with headspace solid-phase microextraction (HS-SPME) combined with gas chromatography (GC) and electron capture detection (ECD), which was applied in order to determine nine chlorobenzenes in soil matrices. Due to the improved fiber preparation, which increases the percentage of calixarene in the coating, the new calixarene fiber exhibits very high extraction selectivity and sensitivity to chlorine-substituted compounds. Various parameters affecting the extraction efficiency were optimized in order to maximize the sensitivity during the chlorobenzene analysis. Interferences from different soil matrices with different characteristics were investigated, and the amount extracted was strongly influenced by the matrix. Therefore, a standard addition protocol was performed on the real soil samples. The linear ranges of detection for the chlorobenzenes tested covered three orders of magnitude, and correlation coefficients > 0.9976 and relative standard deviations (RSD) < 8% were observed. The detection limits were found at sub-ng/g of soil levels, which were about an order of magnitude lower than those given by the commercial poly(dimethylsiloxane) (PDMS) coating for most of the compounds. The recoveries ranged from 64 to 109.6% for each analyte in the real kaleyard soil matrix when different concentration levels were determined over the linear range, which confirmed the reliability and feasibility of the HS-SPME/GC-ECD approach using the fiber coated with diglycidyloxy-C[4]/OH-TSO for the ultratrace analysis of chlorobenzenes in complex matrices.

Determination of odorous compounds in water by headspace solid-phase microextraction-gas chromatography-mass spectrometry

Three major odorous compounds are 2-methylisoborneol ( 2-MIB), geosmin and beta-cyclocitral, which in water were determined by coupling headspace solid-phase microextraction ( HS-SPME) with gas chromatography-mass spectrometry (GC-MS). The operating conditions of HS-SPME, such as fibre type, salt concentration, water temperature, stirring, absorption time and desorption time were studied and discussed.The highest absorption of the odorous compounds were obtained under the following operating conditions as the addition of 30% ( m/V) NaCl, stirring at 60 degrees C for 40 min, using 65 mu m polydimethyl siloxane/divinylbenzene coated fibre. After the odorous compounds had been absorbed in the fibre under the optimal conditions of HSSPME, they were desorbed at 250 degrees C and determined by GC-MS. The limits of detection for geosmin, beta-cyclocitral and 2-MIB in water were 1. 0, 1. 3, 1. 7 ng/L, and the relative standard deviations for them were 4. 9%, 8. 4%, 6. 2%,respectively. There were good linear correlation (the calibration coefficients were all above 0. 997) for the three odorous compounds in the range of 5 similar to 1000 ng/ L. Therefore, trace levels of the odorous compounds at ng/L in water could be quantified by the simple method with satisfactory result.

Determination of phthalate acid esters plasticizers in plastic by ultrasonic solvent extraction combined with solid-phase microextraction using calix[4]arene fiber

Ultrasonic solvent extraction combined with solid-phase microextraction (SPME) with calix[4]arene/hydroxy-terminated silicone (C[4]/OHTSO) oil coated fiber was used to extract phthalate acid esters (PAEs) plasticizers in plastic, such as blood bags, transfusion tubing, food packaging bag, and mineral water bottle for analysis by gas chromatography (GC). Both extraction parameters (i.e. extraction time, extraction temperature, ionic strength) and conditions of the thermal desorption in a GC injector were optimized by analysis of eight phthalates. The fiber shows wonderful sensitivity and selectivity to the tested compounds. Owing to its high thermal stability (380 degreesC), the carryover effect that often encountered when using conventional fibers can be reduced by appropriately enhancing the injector temperature. The method showed linear response over two to four orders of magnitude with correlation coefficients (r) better than 0.996, and limits of detection (LOD) ranged between 0.006 and 0.084 mug l(-1). The relative standard deviation values obtained were less than or equal to 10%. bis-2-Ethylhexyl phthalate (DEHP) was the sole analyte detected in these plastics and recoveries were in the ranges 95.5-101.4% in all the samples. (C) 2004 Elsevier B.V. All rights reserved.

Analysis of organchlorine compounds in water by solid phase microextraction and gas chromatography

In this work, both,solid phase microextraction (SPME) and solid phase extraction(SPE) were used to enrich organochlorine compounds in water samples and analyzed by gas chromatography with electron capture detector. The operating conditions of SPME have been studied and different kinds of solid phase were compared. Linear alkybenzene sulfonate(LAS) was added to the samples to investigate its effect on the analysis. The results indicated that polyacrylate was better than other commercial solid phases in extraction of moderated polar organic compounds and the sensitivity of SPME was higher than SPE. LAS affect much in liquid-liquid extraction and headspace SPME; but it has little effect on SPE and direct-SPME method. The applications showed that SPME was a fast and effective method in sample preparation.

Sol-gel method for the preparation of solid-phase microextraction fibers

A novel sol-gel method is applied for the preparation of solid-phase microextraction (SPME) fibers. Scanning electron microscopy experiments suggested a porous structure for the poly(dimethylsiloxane) (PDMS) coating. SPME-GC analysis provided evidence that the sol-gel fibers have some advantages, such as high thermal stability, efficient extraction rates, high velocities of mass transfer, and spacious range of application.