Design and control of an ultraprecision stage used in grating tiling

In petawatt laser system, the gratings used to compose pulse compressor are very large in size which can be only acquired currently by arraying small aperture gratings to form a large one instead, an approach referred to as grating tiling. Theory and experiments have demonstrated that the coherent addition of multiple small gratings to form a larger grating is viable, the key technology of which is to control the relative position and orientation of each grating with high precision. According to the main factors that affect the performance of the grating tiling, a 5-DOF ultraprecision stage is developed for the grating tiling experiment. The mechanism is formed by serial structures. The motion of the mechanism is guided by flexure hinges and driven by piezoelectric actuators and the movement resolution of which can achieve nanometer level. To keep the stability of the mechanism, capacitive position sensors with nanometer accuracy are fixed on it to provide feedback signals with which to realize closed-loop control, thus the positioning precision of the mechanism is within several nanometers range through voltage control and digital PID algorithm. Results of experiments indicate that the performance of the mechanism can meet the requirement of precision for grating tiling.}

激光二极管阵列的窄线宽、可调谐输出

外腔反馈的激光二极管阵列(LDA)可获得窄线宽、可调谐的光谱输出。外腔由快轴准直镜、准直光学系统和闪耀光栅组成。由于阵列中各发光单元的排列弯曲导致不同波长的光原路返回,引起谱线展宽,在输出光路中加入光谱滤波器,使激光二极管阵列的线宽进一步窄化。这样,激光二极管阵列的输出光谱由自由运转时的2 nm压缩到0.12 nm,在恒定温度23 ℃时,实现了激光在806～818 nm的调谐,调谐范围达12 nm。

Sequence evolution of the CCR5 chemokine receptor gene in primates

The chemokine receptor CCR5 can serve as a coreceptor for M-tropic HIV-1 infection and both M-tropic and T-tropic SIV infection. We sequenced the entire CCR5 gene from 10 nonhuman primates: Pongo pygmaeus, Hylobates leucogenys, Trachypithecus francoisi, Trachypithecus phayrei, Pygathrix nemaeus, Rhinopithecus roxellanae, Rhinopithecus bieti, Rhinopithecus avunculus, Macaca assamensis, and Macaca arctoides. When compared with CCR5 sequences from humans and other primates, our results demonstrate that:(1) nucleotide and amino acid sequences of CCR5 among primates are highly homologous, with variations slightly concentrated on the amino and carboxyl termini; and (2) site Asp13, which is critical for CD4-independent binding of SIV gp120 to Macaca mulatta CCR5, was also present in all other nonhuman primates tested here, suggesting that those nonhuman primate CCR5s might also bind SIV gp120 without the presence of CD4. The topologies of CCR5 gene trees constructed here conflict with the putative opinion that the snub-nosed langurs compose a monophyletic group, suggesting that the CCR5 gene may not be a good genetic marker for low-level phylogenetic analysis. The evolutionary rate of CCR5 was calculated, and our results suggest a slowdown in primates after they diverged from rodents. The synonymous mutation rate of CCR5 in primates is constant, about 1.1 x 10(-9) synonymous mutations per site per year. Comparisons of K-a and K-s suggest that the CCR5 genes have undergone negative or purifying selection. K-a/K-s ratios from cercopithecines and colobines are significantly different, implying that selective pressures have played different roles in the two lineages.

Kinetics of picosecond laser pulse induced charge separation and proton transfer in bacteriorhodopsin

Bacteriorhodopsin (BR) films oriented by an electrophoretic method are deposited on a transparent conductive ITO glass. A counterelectrode of copper and gelose gel is used to compose a sandwich-type photodetector with the structure of ITO/BR film/gelose gel/Cu. A single 30-ps laser pulse and a mode-locked pulse train are respectively used to excite the BR photodetector. The ultrafast failing edge and the bipolar response signal are measured by the digital oscilloscope under seven different time ranges. Marquardt nonlinear least squares fitting is used to fit all the experimental data and a good fitting equation is found to describe the kinetic process of the photoelectric signal. Data fitting resolves six exponential components that can be assigned to a seven-step BR photocycle model: BR-->K-->KL-->L-->M-->N-->O-->BR. Comparing tests of the BR photodetector with a 100-ps Si PIN photodiode demonstrates that this type of BIR photocletector has at least 100-ps response time and can also serve as a fast photoelectric switch. (C) 2003 Society of Photo-Optical Instrumentation Engineers.

A multi-frame image super-resolution method

Multi-frame image super-resolution (SR) aims to utilize information from a set of low-resolution (LR) images to compose a high-resolution (HR) one. As it is desirable or essential in many real applications, recent years have witnessed the growing interest in the problem of multi-frame SR reconstruction. This set of algorithms commonly utilizes a linear observation model to construct the relationship between the recorded LR images to the unknown reconstructed HR image estimates. Recently, regularization-based schemes have been demonstrated to be effective because SR reconstruction is actually an ill-posed problem. Working within this promising framework, this paper first proposes two new regularization items, termed as locally adaptive bilateral total variation and consistency of gradients, to keep edges and flat regions, which are implicitly described in LR images, sharp and smooth, respectively. Thereafter, the combination of the proposed regularization items is superior to existing regularization items because it considers both edges and flat regions while existing ones consider only edges. Thorough experimental results show the effectiveness of the new algorithm for SR reconstruction. (C) 2009 Elsevier B.V. All rights reserved.

X-ray crystal structure and molecular mechanics calculations of (2,6-iso-dipropyl-phenylamide) dimethyl (tetra-methylcyclopenta-dienyl) silane titanium dichloride

Crystal and molecular structure of (2.6-dipropylphenylamide) dimethyl (tetra-methyl cyclopentadienyl) silane titanium dichloride (I) was fully characterized by X-ray diffraction. The crystal is obtained from a mixture of ether/hexane as orthorhombic. with a = 12.658 (3) Angstrom. b = 16.62 (3) Angstrom. c = 11.760 (2) Angstrom. V = 2474.2 (9) Angstrom(3). Z = 4, space group Pnma. R = 0.0399; Componud I compose of the pi-bounded ring with its dimethylsilyl-dipropyl phenyl amido group and the two terminal chloride atoms coordinated to central metal to form a so-called constrained geometry catalyst (CGC) structure. The result of molecular mechanics (MM) calculations on compound I shows that bond lengths and bond angles from the MM calculation are comparable to the data obtained from the X-ray diffraction study. The relation of the structure of CGCs and their catalytic activity by MM calculations is also discussed.

下扬子北缘前陆盆地形成演化与油气赋存条件

The foreland basin on the northern margin of the lower reach of the Yangtze river (the lower Yangtze foreland basin) is tectonically situated in the basin-mountain transitional area along the southeastern flank of the Dabie mountains. The early formation and development of the basin is closely related to the open-up of the Mian-Lue paleo-oceanic basin on the southern margin of the Central Orogenic System represented by Qinling-Dabei orogenic belt, while the tectonic evolution of the middle-late stage of the basin is mainly related to development of the Mian-Lue tectonic zone that occurred on the basis of the previous Mian-Lue paleo-suture. The foreland basin of the northern rim of the lower reach of the Yangtze river was formed during the middle-Triassic collision between the Yangtze and North China plates and experienced an evolution of occuirence-development-extinction characterized by marine facies to continental facies and continental margin to intracontinent in terms of tectonic setting.The foreland basin (T2-J2) was developed on the basis of the passive continental marginal basin on the south side of the Mian-Lue paleo-ocean and superimposed by late Jurassic-Tertiary fault basin. The tectonic setting underwent a multiple transformation of rifting-collisional clososing-tensional faulting and depression, which resulted in changes of the property for the basin and the final formation of the superposed compose basin in a fashion of 3-story-building. According to the tectonic position and evolution stages of plate collision happening on the southeastern margin of the Dabie mountains, and tectono-tratigraphic features shown by the foreland basin in its main formational period, the evolution of the foreland basin can be divided into four stages: 1) pre-orogenic passive margin (P2-Ti). As the Mian-Lue ocean commenced subduction in the late-Permian, the approaching of the Yangtze and North China plates to each other led to long-periodical and large-scale marine regression in early Triassic which was 22 Ma earlier than the global one and generated I-type mixed strata of the clastic rocks and carbonate, and I-type carbonate platform. These represent the passive stratigraphy formed before formation of the foreland basin. 2) Foreland basin on continental margin during main orogenic episode (T2.3). The stage includes the sub-stage of marine foreland basin (T2X remain basin), which formed I-type stratigrphy of carbonate tidal flat-lagoon, the sub-stage of marine-continental transition-molasse showing II-type stratigraphy of marine-continental facies lake - continental facies lake. 3) Intracontinental foreland basin during intracontinental orogeny (Ji-2)- It is characterized by continental facies coal-bearing molasses. 4) Tensional fault and depression during post-orogeny (J3-E). It formed tectono-stratigraphy post formation of the foreland basin, marking the end of the foreland evolution. Fold-thrust deformation of the lower Yangtze foreland basin mainly happened in late middle-Jurassic, forming ramp structures along the Yangtze river that display thrusting, with deformation strength weakening toward the river from both the Dabie mountains and the Jiangnan rise. This exhibits as three zones in a pattern of thick-skinned structure involved the basement of the orogenic belt to decollement thin-skinned structure of fold-thrust from north to south: thrust zone of foreland basin on northern rim of the lower reach of the Yangtze river, foreland basin zone and Jiannan compose uplift zone. Due to the superposed tensional deformation on the earlier compressional deformation, the structural geometric stratification has occurred vertically: the upper part exhibits late tensional deformation, the middle portion is characterized by ramp fault -fold deformation on the base of the Silurian decollement and weak deformation in the lower portion consisting of Silurian and Neo-Proterozoic separated by the two decollements. These portions constitutes a three-layered structural assemblage in a 3-D geometric model.From the succession of the lower reach of the Yangtze river and combined with characteristics of hydrocarbon-bearing rocks and oil-gas system, it can be seen that the succession of the continental facies foreland basin overlies the marine facies stratigraphy on the passive continental margin, which formed upper continental facies and lower marine facies hydrocarbon-bearing rock system and oil-gas forming system possessing the basic conditions for oil-gas occurrence. Among the conditions, the key for oil-gas accumulation is development and preservation of the marine hydrocarbon-bearing rocks underlying the foreland basin. The synthetic study that in the lower Yangtze foreland basin (including the Wangjiang-Qianshan basin), the generation-reservoir-cover association with the Permian marine facies hydrocarbon-bearing rocks as the critical portion can be a prospective oil-gas accumulation.Therefore, it should aim at the upper Paleozoic marine hydrocarbon-bearing rock system and oil-gas forming system in oil-gas evaluation and exploration. Also, fining excellent reservoir phase and well-preserved oil-gas accumulation units is extremely important for a breakthrough in oil-gas exploration.

品牌属性权重判断的反应时研究

In current days, many companies have carried out their branding strategies, because strong brand usually provides confidence and reduce risks to its consumers. No matter what a brand is based on tangible products or services, it will possess the common attributes of this category, and it also has its unique attributes. Brand attribute is defined as descriptive features, which are intrinsic characteristics, values or benefits endowed by users of the product or service (Keller, 1993; Romaniuk, 2003). The researches on models of brand multi-attributes are one of the most studied areas of consumer psychology (Werbel, 1978), and attribute weight is one of its key pursuits. Marketing practitioners also paid much attention to evaluations of attributes. Because those evaluations are relevant to the competitiveness and the strategies of promotion and new product development of the company (Green & Krieger, 1995). Then, how brand attributes correlate with weight judgments? And what features the attribute judgment reaction? Especially, what will feature the attribute weight judgment process of consumer who is facing the homogeneity of brands? Enlightened by the lexical hypothesis of researches on personality traits of psychology, this study choose search engine brands as the subject and adopt reaction time, which has been introduced into multi-attributes decision making by many researchers. Researches on independence of affect and cognition and on primacy of affect have cued us that we can categorize brand attributes into informative and affective ones. Meanwhile, Park has gone further to differentiate representative and experiential with functional attributes. This classification reflects the trend of emotion-branding and brand-consumer relationship. Three parts compose the research: the survey to collect attribute words, experiment one on affective primacy and experiment two on correlation between weight judgment and reaction. The results are as follow: In experiment one, we found: (1) affect words are not rated significantly from cognitive attributes, but affect words are responded faster than cognitive ones; (2) subjects comprehend and respond in different ways to functional attribute words and to representative and experiential words. In experiment two, we fund: (1) a significant negative correlation between attributes weight judgment and reaction time; (2) affective attributes will cause faster reaction than cognitive ones; (3) the reaction time difference between functional and representative or experiential attribute is significant, but there is no different between representative and experiential. In sum, we conclude that: (1): In word comprehension and weight judgment, we observed the affective primacy, even when the affect stimulus is presented as meaningful words. (2): The negative correlation between weight judgment and reaction time suggest us that the more important of attribute, the quicker of the reaction. (3): The difference on reaction time of functional, representative and experiential reflects the trend of emotional branding.