种子植物的起源和早期演化

本项研究工作是在“种子植物的起源和早期演化”的题目下由六个主要的研究部分构成 基本上是根据产自中国的化石所提供的形态学上的证据来探讨与现代植物类群之间的关系。 1)早二迭世山西组松柏类及相关类群的研究 2)山西省上石千峰组晚二迭世种子植物的研究 3)煤核植物科达类在演化上的意义 4)晚泥盆世植物Polypetalophyton wufengensis的研究 5)种子植物起源和早期演化的化石证据的研究 6)早泥盆世似种子植物的研究。

我国重要成煤植物的解剖学研究

本研究工作在研究华夏植物区重要成煤植物的解剖学特征的基础上，重点讨论了华夏植物区科达植物的地质地理分布特征以及科达植物的起源和演化问题，并根据煤巾植物残体研究成果，讨论了我国不同地质时代几种特殊煤的成因问题，把古植物学研究与国民经济的发展联系起来。 本研究工作的主要成果概括如下： 1 华夏植物区的科达植物主要分布于华北植物地理区，其起源时间可能与欧美植物区的科达植物一样早，但其繁盛期却比欧美植物区的要晚、而且其生存的历程要长. 2 华夏植物区的科达植物除了Mesoxylon和Pennsylvanioxylon(=Cordaixylon)二个自然属外，还有第三个自然属存在，即Shanxioxylon属。其茎和生殖器官的解剖构造与前二个属明显不同。 在茎的解剖构造上，Shanxioxylon介于Mesoxylon和Pennsylvanioxylon之间，但在生殖器官的构造上Shanxioxylon显然要比后二者进化。 3 山西太原西山煤田早二叠世早期太原组上部7号煤层煤核中的一种观音座莲目生殖器官一山西虫囊蕨（新种）Scolecopteris shanxiensis sp．nov.是华夏植物区目前发现的第二种具解剖构造的晚古生代观音座莲目生殖器官化石，与虫囊蕨属已有的29个具解剖构造的种相比，本新种具有较进化特征。 4 产于华南晚二叠世的举世闻名的“乐平煤”巾的“树皮体”组分不是来源于鳞木类周皮或辉木类小根皮层，而可能是来源于一种裸子植物的根的木栓组织，这种根很有可能是大羽羊齿类的根一刺根茎。 5 我国北方侏罗纪煤中，主要由银杏类植物形成的煤具有形成石油的很大潜力，而主要由松杉类或苏铁类植物形成的煤形成石油的希望不大。 6 我国云南晚第三纪特殊煤种一浅色褐煤（白泡煤）的主要成煤植物不是泥炭藓植物，而是草本被子植物。

小类心籽（新命名）和波缘靓籽（比较种）的结构与个体发育研究

本文报道了在中国山西太原晚石炭世煤核中发现的两种不同类型种子：小类心籽（新命名）Nucellangium minor nom. nov. 和波缘靓籽（比较种）Callospermarion cf. undulatum, 它们分别属于心籽目（Cardiocarpales)的类心籽属（Nucellangium）和靓籽属（Callospermarion）。 小类心籽为科达类植物种子，两侧对称，厚心形，主切面长约4-6mm，宽3-4mm，次切面厚约2.5-3.0mm。成熟种子的珠被由肉质层、硬质层组成，内表层由7-10层大型薄壁细胞组成，只存在于未成熟种子。肉质层外有一角质层和表皮层，肉质层分为两个亚层;外层细胞扁长，有深色内含物，内层无内含物，由薄壁细胞组成，越往内越小，硬质层外缘光滑无刺突，分为两个纤维细胞亚层，外层细胞壁厚直径小，内层细胞直径增大细胞壁变薄，沿纵切方向伸长。珠心除基部外游离于珠被。双维管系统由分布在肉质层的珠被维管束和呈套状分布的珠心维管束组成，组成珠心维管束的管胞为梯纹状加厚。文章对类心籽属的特征作了修正，并以小类心籽的形态、大小和珠被结构等特征为依据，就它的个体发育进行了探讨，证明晚出同名的小心籽（Cardiocarpus minor Wang 1987）为当前小类心籽个体发育的早期阶段。 波缘靓籽（比较种）（Callospermarion cf. undulatum)为靓羊齿植物（Callistophytales）种子，两侧对称，三层珠被，肉质层占据珠被的大部分，有分泌腔分布，肉质层外缘呈波缘状。珠心除了在基部外，游离于珠被。维管束分布在翼部肉质层内侧。首次在太原的靓籽属种子中发现了具有重要意义的特征性结构——分泌腔。还就山西太原发现的波缘靓籽所代表的个体发育阶段进行了讨论。 文中还分别讨论了这两类种子各自的亲缘关系。

A novel form of carbon micro-balls from coal

A novel form of ball-like carbon material with its size in micrometer range was prepared from coal with nickel as catalyst by arc plasma method. The carbon material has been systematically studied by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD) and ultraviolet laser Raman spectroscopy. The SEM observation shows that the novel carbon material exists in various forms such as individual balls, net-like and plate-like forms, all of which have a quite smooth surface. The diameters of these carbon spheres are quite uniform and in a narrow range of 10-20 mum. The EDS analysis reveals that the ball-like carbon material contains more than 99.5% of carbon and a little amount of other elements such as nickel, silicon and aluminum, The XRD and UV-Raman results reveal that the novel carbon material is a kind of highly graphitized carbon. The growth mechanism of the ball-like carbon material was proposed and discussed in terms of arc plasma parameters and the chemical structure of coal-based carbon. (C) 2002 Elsevier Science Ltd. All rights reserved.

Numerical Simulation of Nox Formation in Coal Combustion with Inlet Natural Gas Burning

A full two-fluid model of reacting gas-particle flows and coal combustion is used to simulate coal combustion with and without inlet natural gas added in the inlet. The simulation results for the case without natural gas burning is in fair agreement with the experimental results reported in references. The simulation results of different natural gas adding positions indicate that the natural gas burning can form lean oxygen combustion enviroment at the combustor inlet region and the NOz concentration is reduced. The same result can be obtained from chemical equilibrium analysis.

Interactions of CO, HCl, and Sox in Pulverised Coal Flames

The effect of HCl and SO_2 on CO oxidation in pulverised coal flames was investigated experimentally and kinetically in an entrained flow combustion reactor. Two bituminous coals (German 'Goettelborn' and a Polish coal) were used as fuels with a feeding rate of 1 or 1.5 kg/h. HCl or SO_2 is introduced into the reactor premixed with the primary air. Experimental results indicate that HCl addition may inhibit CO oxidation in coal flames and increases CO emission. Reducing temperature in the reactor will enhance the inhibitory effect of HCl on CO oxidation. The measured CO profiles along the reactor height clearly show that the addition of HCl may inhibit CO oxidation. In the experimental range of SO_2 addition. The inhibiting effect of SO_2 on CO oxidation is less significant than HCl. A detailed kinetic mechanism is used to model the reactions. And the controlling reactions are analysed.

Pulverized-coal combustion in Wall-Protecting-Jets combustor (WPJC)

A new type of pulverized-coal combustor, called "Wall-Protecting-Jets Combustor" (hereafter, WPJC has been proposed, designed and studied with both CFD (Computational Fluid Dynamics) and experimental methods. The WPJC is based on a novel concept in which all inlet jets are along the combustor wall. Pilot combustion experiments were conducted to investigate the combustion performance of WPJC. Two-phase flows and pulverized-coal combustion were simulated to study the mechanism of),WPJC using the commercial software FLUENT. The results show that the WPJC has many remarkable advantages: wall-protection by the cold jets without the use of refractory materials; low-temperature and three-stage combustion with low NOx emission; negligible ash/slag-deposition; multiple functions with convenient switching between them; effective adjustment of the combustion intensity and the ignition position.

Simulation of Coal Combustion by AUSM Turbulence-Chemistry Char Combustion Model and a Full Two-Fluid Model

An algebraic unified second-order moment (AUSM) turbulence-chemistry model of char combustion is introduced in this paper, to calculate the effect of particle temperature fluctuation on char combustion. The AUSM model is used to simulate gas-particle flows, in coal combustion in a pulverized coal combustor, together with a full two-fluid model for reacting gas-particle flows and coal combustion, including the sub-models as the k-epsilon-k(p) two-phase turbulence niodel, the EBU-Arrhenius volatile and CO combustion model, and the six-flux radiation model. A new method for calculating particle mass flow rate is also used in this model to correct particle outflow rate and mass flow rate for inside sections, which can obey the principle of mass conservation for the particle phase and can also speed up the iterating convergence of the computation procedure effectively. The simulation results indicate that, the AUSM char combustion model is more preferable to the old char combustion model, since the later totally eliminate the influence of particle temperature fluctuation on char combustion rate.

Studies of the Effect of a Coal Concentrator on NO Formation in Swirling Coal Combustion

To develop low-pollution burners, the effect of a coal concentrator on NO formation in swirling coal combustion is studied using both numerical simulation and experiments. The isothermal gas-particle two-phase velocities and particle concentration in a cold model of swirl burners with and without coal concentrators were measured using the phase Doppler particle anemometer (PDPA). A full two-fluid model of reacting gas-particle flows and coal combustion with an algebraic unified second-order moment (AUSM) turbulence-chemistry model for the turbulent reaction rate of NO formation are used to simulate swirling coal combustion and NO formation with different coal concentrators. The results give the turbulent kinetic energy, particle concentration, temperature and NO concentration in cases of with and without coal concentrators. The predicted results for cold two-phase flows are in good agreement with the PDPA measurement results, showing that the coal concentrator increases the turbulence and particle concentration in the recirculation zone. The combustion modeling results indicate that although the coal concentrator increases the turbulence and combustion temperature, but still can remarkably reduce the NO formation due to creating high coal concentration in the recirculation zone.

Numerical modeling of 3-D turbulent two-phase flow and coal combustion in a pulverized-coal combustor

In the present paper, a multifluid model of two-phase flows with pulverized-coal combustion, based on a continuum-trajectory model with reacting particle phase, is developed and employed to simulate the 3-D turbulent two-phase hows and combustion in a new type of pulverized-coal combustor with one primary-air jet placed along the wall of the combustor. The results show that: (1) this continuum-trajectory model with reacting particle phase can be used in practical engineering to qualitatively predict the flame stability, concentrations of gas species, possibilities of slag formation and soot deposition, etc.; (2) large recirculation zones can be created in the combustor, which is favorable to the ignition and flame stabilization.

Magnetohydrodynamics equilibrium of a self-confined elliptic plasma ball

A variational principle is applied to the problem of magnetohydrodynamics (MHD) equilibrium of a self-contained elliptical plasma ball, such as elliptical ball lightning. The principle is appropriate for an approximate solution of partial differential equations with arbitrary boundary shape. The method reduces the partial differential equation to a series of ordinary differential equations and is especially valuable for treating boundaries with nonlinear deformations. The calculations conclude that the pressure distribution and the poloidal current are more uniform in an oblate self-confined plasma ball than that of an elongated plasma ball. The ellipticity of the plasma ball is obviously restricted by its internal pressure, magnetic field, and ambient pressure. Qualitative evidence is presented for the absence of sighting of elongated ball lightning.

Magnetohydrodynamic equilibrium of plasma ball lightning

Thin foil observations using transmission electron microscopy reveal that the density of dislocations within the band is extremely high and the tangled arrangement of dislocations tends to align along the length of the shear band. The grains in the band were also elongated along the shear band and clearly exhibited a crystallographic nature.

The Characteristics of Semi-Cokes --The Solid Residues from Coal Partial Gasification

In this paper the proximate analysis and ultimate analysis of sulfur in different semi-cokes generated from Rizhao bituminous coal and Beijing anthracite under different temperatures is done. Also the tendency of the contents of volatile, ash, fixed carbon and sulfur in different semi-cokes along with the different preparation temperatures is studied. Then the combustion experiment of semi-cokes in the drop-tube furnace system was carried out, and the kinetic parameters of different semi-cokes ware calculated.