Seasonal variations in growth and clearance rate of the Zhikong scallop Chlamys farreri suspended in the deep water of Haizhou Bay, China

The growth and survival of the Zhikong scallop Chlamys farreri suspended in deep water of Haizhou Bay were studied from July 2007 to June 2008, and the biodeposition method was used to estimate the clearance rate of C. farreri under field conditions. Results showed that the scallop grew fast during all the culture time, with the exception of summer. The condition index of the scallop increased with time and reached the highest value in spring of the second year. The survival of scallops was 60.8 +/- A 3.9% at the end of this study, mortality occurring mainly during the summer and autumn of the first year. The clearance rate fluctuated obviously with season,with the highest value in September 2007, and the lowest value in March 2008. Factors accounting for variations in growth and clearance rate of scallops are also discussed.

武汉东湖透明薄皮溞的捕食效率

本文在室内模拟自然水温研究了东湖透明薄皮溞(Leptodora Kindti)对优势枝角类短尾秀体溞(Diaphanosoma brachyurum)和微型裸腹溞(Moina micrura)的捕食效率。实验结果表明,在17℃和21℃时透明薄皮溞对短尾秀体溞的捕食率系数(predation rate coefficient)或称滤过率(clearance rate)分别为15.9和18.2mL predator~(-1)day~(-1)。17℃时透明薄皮溞对微型裸腹溞的捕食率系数为30.1mL preda

Grazing on toxic and non-toxic Microcystis aeruginosa PCC7820 by Unio douglasiae and Corbicula fluminea

To explore the potential grazing effects of mussels on Microcystis aeruginosa, a common bloom-forming phytoplankton, Unio douglasiae and Corbicula fluminea were fed with Scenedesmus obliquus, toxic and non-toxic strains of Microcystis aeruginosa as single food and as mixtures in the laboratory. When fed with single foods, U. douglasiae has similar clearance rates on the three algae populations, while C. fluminea has significantly lower clearance rate on toxic M. aeruginosa than those on the other two algae populations. When fed with mixture foods, both the mussels show significantly higher clearance rates than on single foods. The clearance rates of U. douglasiae on the different food mixtures are not significantly different, and C. fluminea has a significantly lower clearance rate on the toxic food mixtures than that on non-toxic food mixtures. Although the relative lower clearance rates of C. fluminea on toxic food, we may still deduce that both the mussels can exert grazing pressure on phytoplankton. The deduction is supported by the composition of the excretion products. The excretion products (faeces and pseudofaeces) of both mussels contained mainly S. obliquus. In both mixed-food treatments, the ratios of S. obliquus to M. aeruginosa in the excrete products are significantly higher than those in the foods. Therefore, it can be concluded that both mussels prefer M. aeruginosa to S. obliquus, and can cause grazing pressure on M. aeruginosa.

川牛膝多糖的免疫活性及其水解活性片段分离研究

川牛膝多糖（CP）是从传统中药川牛膝（Cyathula officinalis Kuan）中提取的一种活性多糖，现代药理研究表明川牛膝多糖是川牛膝许多生物活性的物质基础。本实验室前期进行了川牛膝多糖的提取、分离、结构鉴定及其部分活性研究，发现川牛膝中多糖含量非常高，在对川牛膝多糖活性的初步研究中也证实了其具有免疫调节作用。我们为了进一步了解其免疫调节活性，并为构效关系的研究奠定基础，对其进行了如下研究： 1． 通过体外毒性检测、淋巴细胞增殖实验、NK细胞杀伤活性和腹腔巨噬细胞吞噬中性红活性测定，发现川牛膝多糖在10～300μg/mL浓度范围内，对细胞无毒性作用；能够促进LPS诱导的B淋巴细胞增殖(P<0.01)、增强NK细胞杀伤活性(P<0.05)和PMΦ吞噬中性红活性(P<0.01)，且随多糖浓度增高而增强；但其对ConA诱导的T淋巴细胞的增殖无促进作用(P>0.05)。 2． 通过正常小鼠体内淋巴细胞转化实验、迟发型变态反应分析、抗体生成细胞检测、碳粒廓清检测、腹腔巨噬细胞吞噬鸡红细胞活性和NK细胞活性测定，发现川牛膝多糖在适应性免疫方面能够促进SRBC免疫小鼠体内的抗体生成细胞的生成（P<0.01）和增强DNFB诱导的DTH（P<0.05），但对ConA诱导的脾淋巴细胞增殖无促进作用（P>0.05）；在固有免疫方面能够提高小鼠碳粒廓清速率（P<0.05），PMΦ吞噬 CRBC 活性（P<0.01）和NK细胞杀伤活性（P<0.05）。同时还发现其对由环磷酰胺(Cy)引起的白细胞数下降具有很好的抑制作用（P<0.01）。 3． 为了获得结构明确、均一的保留活性的川牛膝多糖片段，为其作用机制、构效关系研究提供关键研究材料，我们开展了“保留免疫活性的最小片段”的分离制备的初步研究。建立并优化了川牛膝多糖的酸水解条件，发现在6%的样品浓度，0.025mol/L的硫酸浓度，65℃的水解温度，水解时间为8min的条件下可以得到一系列连续的多糖片段；采用Bio-Gel P2 分子筛柱层析分离得到5个级分，通过体外淋巴细胞增殖实验、NK细胞活性测定、腹腔巨噬细胞吞噬中性红实验发现其中的一个片段仍保留较强的免疫活性，并测得其分子量约为2057Da，为保留免疫活性的最小片段的进一步分离奠定了基础。 Cyathula officinalis Kuan is a commonly-used Traditional Chinese Medicine (TCM) with a wide range of pharmacological activities. Modern pharmacological researches showed the polysaccharide extracted from it (CP) is an important component for many bioactivities of this TCM. In the previous studies, we found CP showed significant immuno-regulative activities. In order to evaluate this activity systematically and lay foundations for revealling its immuno-regulative machanisms and the Structure -Function relationship, we carried out the following research works: 1． The in vitro immunoactivities of CP were evaluated by using normal mice immunocytes with respects to cytotoxicity, lymphocytes proliferation, NK activity and the ability of peritoneal macrophage phagocytizing neutral red. The polysaccharide showed no cytotoxicity below the concentration of 300 μg/mL, and could promote B lymphocytes proliferation (P<0.01), enhance NK activity (P<0.05) and the ability of peritoneal macrophage phagocytizing neutral red (P<0.01) at the concentration of 10-300 μg/mL. The above effects were positively correlated with the concentration of the polysaccharides. But it could not promote T lymphocytes proliferation (P>0.05). 2． The in vivo immunoactivities of CP were observed on normal mice through the following indices: splenic lymphocyte transformation efficiency, delayed-type allergy, antibody-forming cells activity (AFC), rate of carbon clearance, rate of peritoneal macrophage phagocytizing chicken red blood cell (CRBC) and NK activity, and its influence on the decline of the mouse leucocyte count induced by Cy. The polysaccharide at medium-dose enhanced delayed-type allergy （P<0.05）and NK activity（P<0.05） and increased the rate of carbon clearance（P<0.05）, AFC activity（P<0.01） and the rate of peritoneal macrophage phagocytizing CRBC（P<0.01）. The polysaccharides also effectively resisted the decline of the mouse leucocyte count induced by Cy（P<0.01）. However, it couldn’t increase the splenic lymphocyte transformation efficiency（P>0.05）. 3． Attempting to isolate and prepare the minimal fragments retaining activity with identical structure for further studying on immuno-regulative mechanism and Structure-Function relationship, we carried out the study on hydrolysis of CP, isolation of hydrolysed fragments, and the activity evaluation of the isolated fragments. CP with concentration of 6% was hydrolysed at 65℃ for 8 min with sulfuric acid of 0.025 mol/L，then the hydrolysate was separated using Bio-Gel P2 chromatography, 5 portions of fragments were obtained. The immunoactivities of these fragments were evaluated by using normal mice immunocytes with respect to lymphocytes proliferation, NK activity and ability of peritoneal macrophage phagocytizing neutral red. One fragment with relative molecular mass of 2057Da was found retaining immunoactivity.

Deformation, Phase Transformation and Recrystallization in the Shear Bands Induced by High-Strain Rate Loading in Titanium and its Alloys

alpha-titanium and its alloys with a dual-phase structure (alpha+beta) were deformed dynamically under strain rate of about 10(4) s(-1). The formation and microstructural evolution of the localized shear bands were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results reveal that both the strain and strain rate should be considered simultaneously as the mechanical conditions for shear band formation, and twinning is an important mode of deformation. Both experimental and calculation show that the materials within the bands underwent a superhigh strain rate (9 x 10(5) s(-1)) deformation, which is two magnitudes of that of average strain rate required for shear band formation; the dislocations in the bands can be constricted and developed into cell structures; the phase transformation from alpha to alpha(2) within the bands was observed, and the transformation products (alpha(2)) had a certain crystallographic orientation relationship with their parent; the equiaxed grains with an average size of 10 mu m in diameter observed within the bands are proposed to be the results of recrystallization.

Monte-Carlo simulation of surface crack growth rate for offshore structural steel E36-Z35

The Monte- Carlo method is used to simulate the surface fatigue crack growth rate for offshore structural steel E36-Z35, and to determine the distributions and relevance of the parameters in the Paris equation. By this method, the time and cost of fatigue crack propagation testing can be reduced. The application of the method is demonstrated by use of four sets of fatigue crack propagation data for offshore structural steel E36-Z35. A comparison of the test data with the theoretical prediction for surface crack growth rate shows the application of the simulation method to the fatigue crack propagation tests is successful.

Characteristic Dimensionless Numbers in Multi-Scale and Rate-Dependent Processes

For this sake, the macroscopic equations of mechanics and the kinetic equations of the microstructural transformations should form a unified set that be solved simultaneously. As a case study of coupling length and time scales, the trans-scale formulation

Kramers Escape Rate in Nonlinear Diffusive Media

In this paper, we study nonlinear Kramers problem by investigating overdamped systems ruled by the one-dimensional nonlinear Fokker-Planck equation. We obtain an analytic expression for the Kramers escape rate under quasistationary conditions by employing

A new model for the energy release rate of fibre/matrix interfacial fracture

On the basis of the well-known shear-lag analysis of fibre/matrix interface stresses and the assumption of identical axial strains in the fibre and matrix, a new model for predicting the energy release rate of interfacial fracture of the fibre pull-out test model is attempted. The expressions for stresses in the fibre, matrix and interface are derived. The formula for interfacial debonding energy release rate is given. Numerical calculations are conducted and the results obtained are compared with those of the existing models.

Modified Simplified Rate Equation Model of Flowing Chemical Oxygen-Iodine Laser and its Application

A modified simplified rate equation (RE) model of flowing chemical oxygen-iodine laser (COIL), which is adapted to both the condition of homogeneous broadening and inhomogeneous broadening being of importance and the condition of inhomogeneous broadening being predominant, is presented for performance analyses of a COIL. By using the Voigt profile function and the gain-equal-loss approximation, a gain expression has been deduced from the rate equations of upper and lower level laser species. This gain expression is adapted to the conditions of very low gas pressure up to quite high pressure and can deal with the condition of lasing frequency being not equal to the central one of spectral profile. The expressions of output power and extraction efficiency in a flowing COIL can be obtained by solving the coupling equations of the deduced gain expression and the energy equation which expresses the complete transformation of the energy stored in singlet delta state oxygen into laser energy. By using these expressions, the RotoCOIL experiment is simulated, and obtained results agree well with experiment data. Effects of various adjustable parameters on the performances of COIL are also presented.

A modified thermal viscoplastic constitutive law involving the effect of temperature rise rate

At high temperature rise rate, the mechanical properties of 10 # steel were determined experimentally in a very wide range of temperature and strain rates. A new constitutive relationship was put forward, which can fit with the experimental results and describe various phenomena observed in our experiments. Meanwhile, some interesting characteristics about the temperature rise rate, strain and strain rate hardening and thermal softening are also shown in this paper. Finally, the reliability of the constitutive law and the correctness of the constitutive parameters were verified by comparing the calculation results with the experimental data.

Influences of strain rate and temperature variation on material intrinsic length of plasticity strain gradient theory

Cowper-Symonds and Johnson-Cook dynamic constitutive relations are used to study the influence of both strain rate effect and temperature variation on the material intrinsic length scale in strain gradient plasticity. The material intrinsic length scale decreases with increasing strain rates, and this length scale increases with temperature.

Effect of Cold Rolling Ratio and Heating Rate of Batch Annealing on Textures of Micro-Carbon Steel Sheet

在四辊冷轧试验机和Gleeble-1500试验机上进行了热轧微碳钢板的冷轧和退火试验。用D/max-RC衍射仪测量了试样的,/”层织构,并用Roe软件进行了ODF分析。研究表明,所研究的热轧微碳深冲板压下率约为75%,退火升温速度为20-40℃/h时,试样为{111}织构特征；压下率较大(80%)时,退火织构为较弱的{111}组分。无论{111}织构还是非{111}织构都是在形核阶段开始形成,在晶粒长大优先长大,受到定向形核和选择生长双重机制的作用。

Investigation on Depth of Heat Affected Zone of Discharge Spot by High Repetitive Rate YAG Laser-Induced Discharge Texturing

It is known that the press formability and the elongation of laser textured sheet are improved, and the service life of textured roll is longer than that of the un-textured roll due to hardening of the treated surface. One of the goals to develop high repetitive rate YAG laser-induced discharge texturing (LIDT) is to get deeper hardening zone. By observing and measuring cross-section of LIDT spots in different discharge conditions, it is found that the single-crater, which is formed by the discharge conditions of anode, which is covered by an oil film and with rectangular current waveform, has the most depth of heat affected zone (HAZ) comparing with other crater shapes when discharge energy is the same. The depth of HAZ is mainly depends on pulse duration when the discharge spot is single-crater. The results are analyzed.