VLSI architecture of a K-best detector for MIMO--OFDM wireless communication systems

The K-best detector is considered as a promising technique in the MIMO-OFDM detection because of its good performance and low complexity. In this paper, a new K-best VLSI architecture is presented. In the proposed architecture, the metric computation units (MCUs) expand each surviving path only to its partial branches, based on the novel expansion scheme, which can predetermine the branches' ascending order by their local distances. Then a distributed sorter sorts out the new K surviving paths from the expanded branches in pipelines. Compared to the conventional K-best scheme, the proposed architecture can approximately reduce fundamental operations by 50% and 75% for the 16-QAM and the 64-QAM cases, respectively, and, consequently, lower the demand on the hardware resource significantly. Simulation results prove that the proposed architecture can achieve a performance very similar to conventional K-best detectors. Hence, it is an efficient solution to the K-best detector's VLSI implementation for high-throughput MIMO-OFDM systems.

Processing network models of energy/environment systems

Processing networks are a variant of the standard linear programming network model which are especially useful for optimizing industrial energy/environment systems. Modelling advantages include an intuitive diagrammatic representation and the ability to incorporate all forms of energy and pollutants in a single integrated linear network model. Added advantages include increased speed of solution and algorithms supporting formulation. The paper explores their use in modelling the energy and pollution control systems in large industrial plants. The pollution control options in an ethylene production plant are analyzed as an example. PROFLOW, a computer tool for the formulation, analysis, and solution of processing network models, is introduced.

Set invariance in control

The properties of positively invariant sets are involved in many different problems in control theory, such as constrained control, robustness analysis, synthesis and optimization. In this paper we provide an overview of the literature concerning positively invariant sets and their application to the analysis and synthesis of control systems.

模糊反馈控制实时调度算法

为了解决模糊不确定任务集在不可预测环境下的动态抢占调度问题,应用模糊规则和模糊调度理论,提出一个基于模糊反馈控制的调度算法,并建立相应的调度架构.该架构由基本调度器和模糊反馈控制两部分组成.用模糊调度算法作为基本调度器的调度算法,将任务集按不同优先级等级进行划分,优先级等级高的任务优先调度,从而使得更多的重要任务得到调度;模糊控制器与任务流调节策略一起构成模糊反馈控制部分.仿真结果表明,模糊反馈控制调度可以很好地控制任务的截止期错失率,解决任务特征可能是模糊不确定或不可预测民政部下的调度问题,提高重要任务的调度成功率.

Single steady frequency and narrow line width external cavity semiconductor laser

A single longitudinal mode and narrow line width external cavity semiconductor laser is proposed. It is constructed with a semiconductor laser, collimator, a flame grating, and current and temperature control systems. The one facet of semiconductor laser is covered by high transmission film, and another is covered by high reflection film. The flame grating is used as light feedback element to select the mode of the semiconductor laser. The temperature of the constructed external cavity semiconductor laser is stabilized in order of 10(-3)degreesC by temperature control system. The experiments have been carried out and the results obtained-the spectral fine width of this laser is compressed to be less than 1.4MHz from its original line-width of more than 1200GHz and the output stability (including power and mode) is remarkably enhanced.

基于DSP旋翼飞行机器人增稳操纵杆设计

本文首先介绍了旋翼飞行机器人控制系统的功能与应用,着重介绍了其中基于tmx320f28335数字信号处理器的无线增稳操控系统工作原理、硬件构架以及软件流程,并对AD转换过程中的关键FIR滤波算法进行说明,详尽比较了不同滤波参数对滤波效果的影响,最后得到该方法可以应用于旋翼飞行机器人增稳控制系统的结论,并将应用该方法滤波后的控制信号应用于实际增稳飞行,以实际数飞行据验证上述结论。

自动生产线和柔性制造系统的建模、分析与控制

自动生产线和柔性制造系统是典型的离散事件动态系统,近几年在控制理论界受到极大重视。本文首先对自动生产线的建模与分析的研究概况做了综述,重点放在排队网络模型。然后介绍了柔性制造系统的管理与控制问题。