Dynamic Fracture Instability Of Tough Bulk Metallic Glass

We report the observations of a clear fractographic evolution from vein pattern, dimple structure, and then to periodic corrugation structure, followed by microbranching pattern, along the crack propagation direction in the dynamic fracture of a tough Zr41.2Ti13.8Cu12.5Ni10Be22.5 (Vit.1) bulk metallic glass (BMGs) under high-velocity plate impact. A model based on fracture surface energy dissipation and void growth is proposed to characterize this fracture pattern transition. We find that once the dynamic crack propagation velocity reaches a critical fraction of Rayleigh wave speed, the crack instability occurs; hence, crack microbranching goes ahead. Furthermore, the correlation between the critical velocity of amorphous materials and their intrinsic strength such as Young's modulus is uncovered. The results may shed new insight into dynamic fracture instability for BMGs. (C) 2008 American Institute of Physics.

Energy Dissipation In Fracture Of Bulk Metallic Glasses Via Inherent Competition Between Local Softening And Quasi-Cleavage

Compression, tension and high-velocity plate impact experiments were performed on a typical tough Zr41.2Ti13.8Cu10Ni12.5Be22.5 (Vit 1) bulk metallic glass (BMG) over a wide range of strain rates from similar to 10(-4) to 10(6) s(-1). Surprisingly, fine dimples and periodic corrugations on a nanoscale were also observed on dynamic mode I fracture surfaces of this tough Vit 1. Taking a broad overview of the fracture patterning of specimens, we proposed a criterion to assess whether the fracture of BMGs is essentially brittle or plastic. If the curvature radius of the crack tip is greater than the critical wavelength of meniscus instability [F. Spaepen, Acta Metall. 23 615 (1975); A.S. Argon and M. Salama, Mater. Sci. Eng. 23 219 (1976)], microscale vein patterns and nanoscale dimples appear on crack surfaces. However, in the opposite case, the local quasi-cleavage/separation through local atomic clusters with local softening in the background ahead of the crack tip dominates, producing nanoscale periodic corrugations. At the atomic cluster level, energy dissipation in fracture of BMGs is, therefore, determined by two competing elementary processes, viz. conventional shear transformation zones (STZs) and envisioned tension transformation zones (TTZs) ahead of the crack tip. Finally, the mechanism for the formation of nanoscale periodic corrugation is quantitatively discussed by applying the present energy dissipation mechanism.

Prevalence Of Shear Banding In Compression Of Zr41Ti14Cu12.5Ni10Be22.5 Pillars As Small As 150 Nm In Diameter

Recently, the size dependence of mechanical behaviors, particularly the yield strength and plastic deformation mode, of bulk metallic glasses (BMG) has created a great deal of interest. Contradicting conclusions have been drawn by different research groups, based on various experiments on different BMG systems. Based on in situ compression transmission electron microscopy (TEM) experiments on Zr41Ti14Cu12.5Ni10Be22.5 (Vit 1) nanopillars, this paper provides strong evidence that shear banding still prevails at specimen length scales as small as 150 nm in diameter. This is supported by in situ and ex situ images of shear bands, and by the carefully recorded displacement bursts under load control its well as load drops under displacement control. Finite element modeling of the stress state within the pillar shows that the unavoidable geometry constraints accompanying such experiments impart a strong effect on the experimental results, including non-uniform stress distributions and high level hydrostatic pressures. The seemingly improved compressive ductility is believed to be due to such geometry constraints. Observations underscore the notion that the mechanical behavior of metallic glasses, including strength and plastic deformation mode, is size independent at least in Vit 1. (C) 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Formation Mechanism Of Lamellar Chips During Machining Of Bulk Metallic Glass

The uniqThe unique lamellar chips formed in turning–machining of a Vit 1 bulk metallic glass (BMG) are found to be due to repeated shearband formation in the primary shear zone (PSZ). A coupled thermomechanical orthogonal cutting model, taking into account force, free volume and energy balance in the PSZ, is developed to quantitatively characterize lamellar chip formation. Its onset criterion is revealed through a linear perturbation analysis. Lamellar chip formation is understood as a self-sustained limit-cycle phenomenon: there is autonomous feedback in stress, free volume and temperature in the PSZ. The underlying mechanism is the symmetry breaking of free volume flow and source, rather than thermal instability. These results are fundamentally useful for machining BMGs and even for understanding the physical nature of inhomogeneous flow in BMGs.ue lamellar chips formed in turning–machining of a Vit 1 bulk metallic glass (BMG) are found to be due to repeated shearband.

Nanoscale periodic corrugation to dimple transition due to "beat" in a bulk metallic glass

We report an intriguing observation that the interaction of brittle nanoscale periodic corrugations (NPCs) can lead to the formation of ductile dimples on the dynamic fracture surface of a tough Vit 1 bulk metallic glass (BMG) under high-velocity plate impact. A “beat” phenomenon due to superposition of simple harmonic vibrations, approximately characterizing NPCs, is proposed to explain this unusual brittle-to-ductile transition. The present results agree well with our previously revealed energy dissipation mechanism in the fracture of BMGs.

7 种蛇毒小肽对临床分离耐(多) 药结核分枝杆菌的体外活性研究

目的　检测7 种从蛇毒分离的小肽是否对临床分离的耐药性结核分枝杆菌菌株具有活性。方法　放射性方法检测蛇毒 小肽对结核分枝杆菌的最小抑制浓度,细菌存活计数确证放射性方法的结果。结果　7 种蛇毒小肽对耐药性结核分枝杆菌菌 株都有活性。其MIC 值分别为(μg·mL - 1) : Opiophagus hannah 5. 4 , Naja at ra 8. 6 , B ungarus f asciatus 6. 4 , Trimeresurus ste2 jnegri 12. 6 , Protobothrops mucrosquamatus 11. 8 , Protobothrops jerdonii 7 , A gksist rodon halys 4. 2 。结论　这些结果是首次报 道,为进一步设计和开发新来源的抗结核病新药提供了依据。

Revision of the cyprinid genus Placocheilus Wu, 1977 in China, with description of a new species from Yunnan

Placocheilus is re-diagnosed on the basis of oromandibular structures compared to those of closely related groups. It is represented in China by three species restricted to Yunnan, namely P. caudofasciatus from the Tengtiaohe River (Nam Na), P. cryptonemus from the Nujiang Rive ( upper Salween River basin), and P. robustus, herein described as a new species from the Yuanjiang River ( Red River basin). P. robustus n. sp. is differentiated from its congeners in having a stout caudal peduncle ( depth 72.4-82.5% of its length) and the medium-sized scaleless midventral region of belly extended slightly beyond halfway from the pectoral- to pelvic-fin origin. It is further distinguished from P. caudofasciatus in having a coarsely crenulated rostral fold with 18-23 indentations on its distal margin and a smaller mental adhesive disc ( length 66.7-71.4% of its width and 37.0-43.1% of the head length).

西黑冠长臂猿（Nomascus concolor）栖息地与鸣叫特征分析

本研究重点对云南哀牢山、无量山、永德大雪山以及老挝 Nam Kan 保护区西黑冠 长臂猿(Nomascus concolor)的鸣叫特征进行了分析研究，以探讨长臂猿鸣叫个体特异性 的发生机制及其在地理种群区分或亚种地位划分中的意义；同时对哀牢山平河西黑冠长 臂猿栖息地乔木结构进行了样方调查，揭示西黑冠长臂猿高海拔栖息地的乔木结构特 征，为后续行为学研究提供基础生态数据。 研究表明，云南省哀牢山平河（N 24°20′09.5″, E 101°17′16.1″, 海拔2600m）的黑 长臂猿栖息地有乔木57 种隶属于23 科37 个属；木质藤本植物9 种隶属于6 科8 属。 优势科主要为杜鹃花科（Ericaceae）、木兰科（Magnoliaceae）、山茶科（Theaceae）和 壳斗科（Fagaceae）植物。乔木的多样性指数、均匀度指数在沟底明显降低，而乔木1 层和2 层所占的比例以及木质藤本的平均多度均随着坡位的下降而升高。与其他地区的 长臂猿相比，哀牢山黑长臂猿的活动高度较低（10—22m），果实性食物种类较少。 西黑冠长臂猿的雄性鸣叫包括Boom 音节、aa 音节、弱调节音节、强调节音节和 coda 音节，Boom 音节只是一单独的条带状音节，结构最简单也最稳定；aa 音节、弱调 节音节、强调节音节和coda 音节的稳定性则呈现出依次增大的趋势。强调节音节和coda 部分的稳定性在总体没有显著差异，但在某些变量上coda 音节比强调节音节有显著更 高的稳定性。在此基础上，重点基于对coda 音节的分析，发现同一地点不同群体的雄 性西黑冠长臂猿个体之间存在非常显著的鸣叫特异性，并且同一地点不同群体的雄性个 体之间鸣叫的差异，显著高于不同地点间雄性个体间鸣叫的差异。这一发现表明西黑冠 长臂猿很有可能在有意识地通过鸣叫声音的调节，来增加与邻近群体间鸣叫的差异性， 并依靠这一行为识别邻近群的成年个体和陌生个体或新成年的未配对个体，这对具领域 性、配对的长臂猿来说具有显著的生态适应意义。基于对西黑冠长臂猿所有4 个亚种雌 雄个体鸣叫的逐步判别分析，结果表明西黑冠长臂猿明显分为3 个类群：1) 指名亚种 （N. c. concolor）和景东亚种（N. c. jingdongensis）为同一类群；2)滇西亚种（N. c. furvogaster）类群；3)老挝亚种（N. c. lu）类群，综合我们及前人的研究结果，我们认 为老挝亚种与其它三个亚种之间很可能已经达到了亚种分化的水平，滇西亚种也是如 此，但其有效性还值得进一步研究和探讨，而指名亚种和景东亚种间可能还没有达到亚种分化的水平。

Strain rate-dependent shear band behavior in bulk metallic glasses

In this article, we review our recent advances in understanding the deformation behavior of a typical tough Zr41.2Ti13.8Cu12.5Ni10Be22.5 (Vit 1) bulk metallic glass (BMG), as a model material, under various loading modes and strain rates, focusing particularly on the rate-dependence and formation mechanism of shear-banding. Dynamic and quasi-static mechanical experiments, including plate shear, shear punch and spherical indentation, and continuum as well as atomistic modeling on shear-banding are discussed. The results demonstrate that higher strain rate slows down the annihilation process of free volume, but promotes the free-volume coalescence, which is responsible for the rate-dependent shear banding. The physical origin of shear bands, that is the free volume softening underpinned by irreversible rearrangements of atoms, is unveiled. Finally, some concluding remarks are given.

复合肥长效添加剂是提高化肥利用率的新途径

复合肥长效添加剂是将脲酶抑制剂、硝化抑制剂、磷活化剂有机结合,利用其协同作用比单一抑制剂使肥料具有更长供肥期和更高利用率,达到一次性投肥免追肥的目的。这是提高作物产量和提高化肥利用率的有效手段之一,应大力推广在复混肥中添加这种长效添加剂(NAM)。

Synthesis and characterization of the biodegradable polycaprolactone-graft-chitosan amphiphilic copolymers

A novel synthetic approach to biodegradable amphiphilic copolymers based on poly (epsilon-caprolactone) (PCL) and chitosan was presented, and the prepared copolymers were used to prepare nanoparticles successfully. The PCL-graft-chitosan copolymers were synthesized by coupling the hydroxyl end-groups on preformed PCL chains and the amino groups present on 6-O-triphenylmethyl chitosan and by removing the protective 6-O-triphenylmethyl groups in acidic aqueous solution. The PCL content in the copolymers can be controlled in the range of 10-90 wt %. The graft copolymers were thoroughly characterized by H-1 NAM, C-13 NMR, FT-IR and DSC. The nanoparticles made from the graft copolymers were investigated by H-1 NMR, DLS, AFM and SEM measurements. It was found that the copolymers could form spherical or elliptic nanoparticles it? water. The amount of available primary amines on the surface of the prepared nanoparticles was evaluated by ninhydrin assail, and it can be controlled by the grafting degree of PCL.

中国西部大气和雪冰黑碳及其传输过程研究

Glaciers in west China are the sources of the major great rivers in Asia, and the solid water resources are crucial to China and South Asia. Black carbon (BC) results in very complex climate effects not only in the atmosphere, but accelerates the melting after its deposit on the surface of snow/ice. As the main distributed area of glaciers in China, the Tibetan Plateau (TP) and Xinjiang region are abutted by South Asia, Central Asia, and Russia, and east China, and the atmospheric environment would be influenced by the BC emitted from these regions. Whereas, the BC’s temporal and spatial distributions for concentration in the mid and top troposphere in west China, its transport, and its radiative forcing after deposited on the snow/ice surface are not well understood at the present. In the field, we collected samples from surface snow, snow pits, ice core, and aerosol in the glaciers, analyzed BC content mainly by the thermo-oxidized method in the laboratory, and discussed temporal and spatial distributions for BC concentrations in glaciers, the transport, and its impacts on the environment. Several conclusions were derived as follows: 1_Spatial distribution and the impact on albedos for BC concentrations in snow/ice: the BC concentrations in the surface snow for the investigated glaciers could be placed in areas, the Tianshan Mountains ＞ the central TP ＞ the Pamirs ＞ the Qilian Mountians ＞ the Himalayas. This distribution could be attributed to the elevation of the glaciers, the topography of the TP, and more regional emissions. Probably significant impacts on the albedos of the glacier surface could be caused by BC deposits, and the estimated reduced albedos on the glaciers are 9.8% (the Zhadang glacier), 8.7% (the Miao’ergou Riverhead No.3 glacier), and 6.8% (the Kuitun River Haxilegen No.48 glacier), and 6.2% (the Dongkemadi glacier), and 5.3% (the La’nong glacier), and 4.2% (the Muztagata glacier), etc. 2_The temporal variance of BC concentrations in ice of the East Rongbuk Glacier (ERG) and its climatic implications: major cations and anions (e.g., SO42- and Ca2+) concentrations in aerosols during summer monsoon seasons showed their close relationships with the sources of air masses, in which the variance of SO42- concentrations suggested the atmospheric environment over the ERG was significantly influenced by the aerosols from South Asia. BC record based on an ice core suggested its deposit was dominantly transported by monsoons in summers and by westerlies in other seasons, and the BC from South Asia in summers dominated the varying trend of its concentrations in the ice core and caused higher concentrations in summers than those in other seasons. In the past 50 yrs, BC concentrations showed fluctuations, whereas showed an increasing tread in the most recent decade, and exceeded 50 μg kg-1 in the summer of 2001; correspondingly, the radiative forcing caused by BC showed an increasing trend since 1990s, and exceeded 4.5 W m-2 in the summer of 2001. 3_Cabonaceous aerosols in the Nam Co region: organic carbon (OC) concentration accounted for ～95% and BC for ～5% in the total carbonaceous aerosol concentration, which was significantly influenced by summer precipitations. OC was dominantly derived from fossil fuel burning and BC from both fossil fuel and biomass burning. Trajectory analysis and aerosol optical depth suggested the atmospheric environment in the Nam Co region was most probably influenced by the emissions from South Asia. The potential source regions of air pollutants in the Nam Co regions in summers might be Bangladesh and east India, and in winters might be the Indo-gangetic basin. The scavenging ratio of atmospheric BC by rainfalls was less than those at other sites. West China is a less-developed region for industry, where BC concentrations in the atmosphere and snow/ice could be significantly influenced by the emissions from the abutted regions with rising industries (South Asia, Central Asia, and Russia). For example, snow/ice BC concentrations in the glaciers of the Parmirs, the Tianshan Mountains, and the Qilian Mountains in the northeast margin of the TP might be more influenced by the emissions from Centrial Asia (transported by the westerlies), those in the glaciers of the Himalayas might be more influenced by the emissions from South Asia (transported by the monsoons and the westerlies), and atmospheric carbonaceous aerosols might also be more influenced by the emissions from South Asia (transported by the monsoons and the westerlies). The BC concentrations in some glaciers might cause significant impacts on the albedos for the glaciers, and therefore enhanced the radiative forcings, for example, the ERG. The research on the relationships among atmospheric and snow/ice BC and its radiative forcing, variance of snow cover, mass balance of glaciers, and climate forcing would be needed in future.

阿哈湖深层水中微生物和硫酸还原菌数量及群落结构空间变化

采用荧光原位杂交法分析了贵州阿哈湖深层水环境中总微生物、真细菌和硫酸盐还原菌数量。结果表明:该湖水中微生物总量为116 ×107 个·L - 1 ,真细菌占微生物总量的52. 9%,且微生物总量和真细菌数量垂直变化无明显差异。随着水体深度的增加,活性微生物数量增加,且微生物的群落结构更加复杂。阿哈湖深层水体中有一定数量的硫酸盐还原菌存在。