Martensitic transformation under impact with high strain rate

This paper deals with the quantitative prediction of the volume fraction of martensitic transformation in a austenitic steel that undergoes impact with high strain rate. The coupling relations between strain, stress, strain rate, transformation rate and transformed fraction were derived from the OTC model and modified Bodner-Partom equations, where the impact process was considered as an adiabatic and no entropy-increased process (pressure less than or equal to 20GPa). The one-dimensional results were found to model and predict various experimental results obtained on 304 stainless steel under impact with high strain rate.

Molecular dynamics simulation on dislocation emission process

A correlative reference model for a computer simulation of molecular dynamics is proposed in this paper. Based on this model, a flexible displacement boundary scheme is naturally introduced and the dislocations emitted from a crack tip are presumed to continuously pass through the border of an inner discrete atomic region to pile up at an outer continuum region. The simulations for a Mo crystal show that the interaction between a crack and emitted dislocations results in the decrease in local stress intensity factor gradually.

Effect of vacuum-induced coherence on lasing without inversion in an equispaced three-level ladder system

The effects of vacuum-induced coherence (VIC) on the properties of the absorption and gain of the probe field in an equispaced three-level ladder atomic system are investigated. It is found that lasing without inversion (LWI) is remarkably enhanced due to the effect of VIC in the case of the small incoherent pump rate.

Routing scheme, permutation properties, and optical implementation of a four-shuffle-exchange-based Omega network

The routing scheme and some permutation properties of a four-shuffle-exchange-based Omega network are discussed. The corresponding optical setup, which is composed of 2-D phase spatial light modulators and calcite plates, is proposed and demonstrated through mapping the inputs to a 2-D array. Instead of one shuffle-exchange followed by one switching operation as in ordinary Omega networks, in our presented system, the shuffle interconnection embraced in the switches is accomplished simply by varying the switching structure of each stage. For the proposed polarization-optical modules, the system is compact in structure, efficient in performance, and insensitive to the environment. (C) 1997 Society of Photo-Optical Instrumentation Engineers.

利用飞秒激光“勾画”计算全息图

中国科学院上海光学精密机械研究所光子技术实验室在飞秒激光诱导微纳功能结构研究方面取得新的重要进展，研究发展了一种新的计算全息方法。该方法利用飞秒激光直写在金属薄膜上形成计算全息图，不需要掩模且不必对基体材料做清洗、刻蚀等特殊的前期及后期处理，通过模拟算法，

三种不同后处理方式对ZrO_2薄膜性能的影响

采用有氧热处理、激光预处理和离子后处理三种方式对电子束蒸发(EBE)制备的单层ZrO_2薄膜进行了后处理,并分别对样品的光学性能和抗激光损伤阈值(LIDT)特性进行了研究。实验结果表明,热处理方式可以有效排除膜层内吸附的水气,弥补薄膜制备过程中的氧损失,使得光谱短移、吸收减小、损伤阈值增高;激光预处理过程可以在一定程度上减少缺陷、提高损伤阈值,但对膜层的光谱和吸收情况没有明显的改善作用;而离子后处理能够提高膜层的堆积密度、减少缺陷、降低吸收从而提高损伤阈值。由于三种方式处理机制不同,在实际应用中应根据膜层的性能选择合适的处理方式。

适合脑内多种神经活性物质免疫组化研究的复合固定

　寻找适合脑内多种神经活性物质免疫组织化学研究的固定方案。方法　以胆碱乙酰化酶、P 物质和γ- 氨基丁酸为递质合成酶、多肽及氨基酸递质的代表,以大鼠隔O斜带O基底核此三类阳性神经元的数量、染色和形态 变化为依据,检测了一系列复合固定配方对此三类抗原免疫组化的影响。结果　经0. 2 %戊二醛、4 %多聚甲醛和 0. 2 %苦味酸灌注固定和4 %多聚甲醛后固定,并经1 %硼氢化钠处理的脑组织,能很好地显示该三类神经元。此结 果还得到猫脑免疫电镜研究的支持。结论　有可能设计一种满足脑内尽可能多种类递质及合成酶免疫组化光、电 镜研究所需的复合固定配方,以期在同一实验动物获得最大程度的化学神经解剖学信息。

遗传标记及其在动物遗传育种中的应用(上)

本文综述了几种常用的遗传标记方法及其各自的优缺点, 以及遗传标记在动物遗 传育种中的应用现状, 着重对分子生物学标记作了较系统的阐述。

沙鳅亚科鱼类线粒体DNA控制区结构分析及系统发育关系的研究

对沙鳅亚科鱼类3属14个代表种的线粒体DNA控制区序列的结构进行了分析。通过与鲤形目鱼类的控制区序列进行比较,将沙鳅亚科鱼类的控制区分为终止序列区、中央保守区和保守序列区三个区域。同时识别了沙鳅亚科中一系列保守序列,并给出了它们的一般形式。以胭脂鱼为外类群,对比条鳅亚科、花鳅亚科、以及平鳍鳅科的代表性种类,采用NJ、MP和ML法构建沙鳅亚科的分子系统树。分子系统发育分析表明,沙鳅亚科为一单系,包括3个属:沙鳅属、副沙鳅属和薄鳅属,各属均构成单系。根据分子系统学、形态学的结果及地理分布推断,沙鳅亚科中沙鳅属