Anisotropic, gradient and metal-like mechanical behaviors of teeth and their implications on tooth functions

The anisotropy and gradient of the elastic modulus and the hardness of teeth were investigated by means of instrumented indentation method. Such properties are attributed to the unique microstructures of teeth based on scanning electron microscopic analysis. By comparing the relationship between the ratio of hardness to the reduced elastic modulus and the ratio of elastic unloading work to the total work of teeth in course of indentation to those of other materials, we found that the material behaviors of teeth display metal-like characteristics rather than ceramics as considered traditionally. These material behaviors and relevant functions are discussed briefly.

Circa AD 626 volcanic eruption；climatic cooling；and the collapse of the Eastern Turkic Empire

IEECAS SKLLQG

Effect of dentin tubules on the mechanical properties of dentin - part III: Numerical, analysis

Imitating a real tooth and the periodontal supporting tissues, we have established a 2D finite element model and carried out a numerical analysis based on the inhomogeneous and anisotropic (IA) stress-strain relation and strength model of dentin proposed in the preceding Parts I and II, and the conventional homogeneous and isotropic (III) model, respectively. Quite a few cases of loadings for a non-defected and a defected tooth are considered. The numerical results show that the stress level predicted by the IA model is remarkably higher than that by the III model, revealing that the effect of the dentin tubules should be taken into a serious consideration from the viewpoint of biomechanics.

The mechanism of energy storage by shearing the solar magnetic field

In this paper, a complete set of MHD equations have been solved by numerical calculations in an attempt to study the dynamical evolutionary processes of the initial equilibrium configuration and to discuss the energy storage mechanism of the solar atmosphere by shearing the magnetic field. The initial equilibrium configuration with an arch bipolar potential field obtained from the numerical solution is similar to the configuration in the vicinity of typical solar flare before its eruption. From the magnetic induction equation in the set of MHD equations and dealing with the non-linear coupling effects between the flow field and magnetic field, the quantitative relationship has been derived for their dynamical evolution. Results show that plasma shear motion at the bottom of the solar atmosphere causes the magnetic field to shear; meanwhile the magnetic field energy is stored in local regions. With the increase of time the local magnetic energy increases and it may reach an order of 4×10^25 J during a day. Thus the local storage of magnetic energy is large enough to trigger a big solar flare and can be considered as the energy source of solar flares. The energy storage mechanism by shearing the magnetic field can well explain the slow changes in solar active regions.

High-efficiency reflective diffraction gratings in fused silica as (de)multiplexers at 1.55 mu m for dense wavelength division multiplexing application

We describe high-efficiency, high-dispersion reflection gratings fabricated in bulk fused Silica illuminated by incident lights in the C + L bands as (de)multiplexers for dense wavelength division multiplexing (DWDM) application. Based on the phenomenon of total internal reflection, gratings with optimized profile parameters exhibit diffraction efficiencies of more than 90% under TM- and TE-polarized incident lights for 101-nm spectral bandwidths (1520-1620 nm) and can reach an efficiency of greater than 97% for both polarizations at a wavelength of 1550 nm. Without loss of metal absorption, without coating of dielectric film layers, and independent of tooth shape, this new kind of grating should be of great interest for DWDM application. (C) 2005 Optical Society of America.

Description of a new genus and two new species of labeonine fishes from South China (Teleostei : Cyprinidae)

A new genus and two new species are described from the Pearl River drainage in Guangxi Province, South China. Hongshuia, new genus, can be distinguished from all other Asian genera of the Labeonini by having a lower lip with its median lobe modified into a round, fleshy plate peripherally greatly protruded so as to form a ring-like fold that is posteromedially continuous with the mental region, and centrally sunken so as to form a round, flat, fleshy pad. This genus is distinct from all other Asian labeonine genera of the Garrina except for one newly described species of Parasinilabeo ( P. longibarbus), Pseudocrossocheilus, and Sinocrossocheilus, in the presence of well-developed maxillary barbels. Hongshuia differs from the above three genera in the lower lip morphology, and further from both Pseudocrossocheilus and Qianlabeo in the number of pharyngeal tooth rows and from Sinocrossocheilus in the colour pattern. Two new species, H. banmo and H. paoli, differ in the distribution density and degree of development of papillae on the rostral fold, depth of indentations on the distal edge of the rostral fold, presence or absence of papillae on the lower lip, size and shape of tubercles on the tip of the snout and anterior portion of the lachrymal, length, position and colour pattern of the dorsal fin, and snout length.

Redescription of Nais inflata Liang (Annelida : Oligochaeta) from China

Nais inflata Liang 1963 is redescribed on the basis of fully mature specimens collected from several localities of the Yangtze River and Yellow River. The observations and redescription resulting from the study of mature specimens supports N. inflata as a valid species. This species is characterized by a thickened body, the ventral crotchets all of the same type with distal tooth usually longer than proximal one, a greater number of dorsal chaetae per bundle, stout dorsal needles with equal minute bifid teeth (<1 mu m), presence of penial chaetae, and prostate glands on vasa deferentia instead of atria. The species is most closely related to N. communis Piguet, 1906 and N. variabilis Piguet, 1906. A table comparing allied species is provided.

Linichthys: A new genus of Chinese cyprinid fishes (Teleostei : Cypriniformes)

yLinichthys, new genus, is proposed for Barbodes laticeps Lin and Zhang, 1986. It can be separated from all other genera of Asian Barbinae in having a shallow depression extending along the median portion of the upper lip. Linichthys is superficially very similar to the type species of a monotypic Chinese cyprinid cavefish genus, Typhlobarbus nudiventris, in having an elongate and somewhat compressed body form, a truncate distal margin of the dorsal fin, and a soft and smooth last unbranched dorsal-fin ray, all of them being atypical for most of Asian barbins. The two genera differ in size of the eye and the number of rows of pharyngeal tooth. Although the same body form and/or structure of the dorsal fin are also shared with some species currently placed in other genera of Asian barbins, the recognition of Linichthys is warranted because of their marked differences in other characters. A redescription is also provided for the type species of the monotypic genus, Linichthys laticeps. It is known only from the upper and middle Zhu Jiang basin and the upper Chang Jiang basin in the city of Guiyang, Guizhou Province, South China.

Redescription of Difflugia tuberspinifera Hu, Shen, Gu et Gong, 1997 (Protozoa : Rhizopoda : Arcellinida : Difflugiidae) from China

The freshwater testate amoeba Difflugia tuberspinifera Hu et al. 1997 collected from pond and lake in China, is investigated by light and scanning electron microscopy. This little known taxon is redescribed and its morphology, biometry and ecology are supplied. After carefully comparison with other six similar species including Difflugia bartosi Stepanek, D. corona Wallich, D. corona cashi Deflandre, D. corona tuberculata Vucetich, D. muriformis Gauthier-Lievre et Thomas and Netzelia tuberculata (Wallich) Netzal we believe that the sub-spherical to spherical shell, the mulberry-shaped appearance, the 7-10 apertural tooth-like structures, the short collar and the conical spines numbering from 4 to 8 at the upper equatorial region in D. tuberspinifera set it apart from other species. Besides, statistical analysis indicates that D. tuberspinifera is a size-monomorphic species characterized by a main-size class and a small size range and the shell height is significant correlated with other morphometric characters at p < 0.05 excepting the number of aperture tooth-like structures and the number of spines. Moreover, D. tuberspinifera inhabits not only lotic but also lentic environment.

Microorganisms linked to Neoproterozoic microspar carbonate sedimentation in the Jilin-Liaoning area

Molar-tooth carbonate refers to a sort of rock that has ptygmatical folded structure comparable to the ivory. This kind of carbonate exists in a special time range (from Middle to Neoproterozoic). Its origin and the possibility to use it in stratigraphic correlation of the paleocontinent is the key task of the IGCP447, a project on Proterozoic molar tooth carbonates and the evolution of the earth (2001-2005). The importance lies in that the molar-tooth structure is the key to solving problems related to Precambrian biological and global geochemical events. The molar-tooth structure is associated with microorganisms. Development and recession of such carbonates have relations with the evolution process of early lives and abrupt changes in sea carbonate geochemistry. In recent years, based on researches on petrology, geochemistry and Sr isotope of molar-tooth carbonate in the Jilin-Liaoning and Xuzhou-Huaiyang area, the authors hold that it can be used as a marker for stratigraphic sequence and sedimentary facies analyses.

Coupling coefficients of gratings with graded refractive index waveguides

In this paper, the effective coupling coefficient k(eff) and the self-coupling coefficient zeta(1) are introduced to describe the characteristic of gratings in a resonant situation when the effects of radiation and other partial waves coupling are considered. The dependence of these two coupling coefficients on grating tooth shapes and depths and the dimensions of graded refractive index (GRIN) waveguides is numerically analysed. The results show that the gratings with linear GRIN waveguides have the largest \k(eff)\. The possibility of realizing a complex-coupled DFB laser, even a pure gain or loss coupled DFB laser, employing only a real refractive index coupled grating is also discussed.