Modeling trophic positions of the alpine meadow ecosystem combining stable carbon and nitrogen isotope ratios

Stable carbon and nitrogen isotope ratios of single tissues or whole bodies were analyzed to establish trophic positions of main consumers living at the alpine meadow ecosystem in the Tibetan Plateau. The results demonstrated that delta C-13 and delta N-15 values of vertebrates showed great variations and ranged from -26.83 to -22.51 parts per thousand and from 2.33 to 8.44 parts per thousand, respectively. Plateau pika, root vole, plateau hare, infants of rodents and hatchlings of passerine bird species had the lowest delta C-13 and delta N-15 values. delta C-13 and delta N-15 values of omnivorous and insectivorous birds and amphibians showed intermediate. Carnivorous species, steppe polecat and Upland buzzard, and omnivorous Robin accentor and White wagtail possessed extremely higher VC and delta N-15 values. Omnivorous birds captured in earlier year had significantly less negative delta C-13 and greater delta N-15 values than those captured later. Based on steady angular enrichment between trophic levels, an "alpha and vector model" combing delta C-13 and delta N-15 values was introduced to reveal trophic positions, the results indicated that Tibetan sheep, Tibetan yak, plateau pika, root vole, plateau hare, infants of small rodents showed the lowest trophic positions (TP 1.81-2.38). While omnivorous and insectivorous birds, their hatchlings and amphibians showed intermediate trophic positions (TP 2.06-2.89), carnivorous species steppe polecat and Upland buzzard, migrant birds possessed extremely higher trophic positions (TP 2.89-3.05). The isotopic investigation of organisms and the introduced "alpha and vector model" successfully demonstrated the same trophic positions and diet prediction of consumers as nitrogen enrichment model at the alpine meadow ecosystem. Besides of this information, the "alpha and vector model" can also be incorporated into multiple isotope signatures to infer trophic relationships. This angular enrichment model has the potential to address basic ecological questions, such as trophic structure, trophic dynamics, and energy flow in other terrestrial ecosystems of properly handled. (C) 2005 Elsevier B.V. All rights reserved.

Seasonal variations in stable isotope ratios of two biomanipulation fishes and seston in a large pen culture in hypereutrophic Meiliang Bay, Lake Taihu

This paper reports on seasonal changes in stable carbon and nitrogen isotope ratios of seston and muscle tissue of silver carp and bighead carp during 2004 and 2005, focusing primarily on the carbon sources and trophic relationships among phytoplankton, zooplankton and silver carp and bighead carp in a large fish pen of Meiliang Bay (Lake Taihu, China). delta C-13 showed a minimal value in March 2005 and a maximal value in August 2005 in seston both inside and outside the pen, whereas delta N-15 of seston showed the minimum in winter and the maximum during algal blooms. A positive correlation between delta C-13 of silver carp and that of seston suggested that temporal variation Of delta C-13 in seston was preserved in fish via the food chain. The differences of delta C-13 among seston, zooplankton and muscle tissue of silver carp and bighead carp ranged only 0.2-1.7%, indicating that plankton production was the primary food source of filter-feeding fishes. According to a mass balance model, we estimated that the contributions of zooplankton to the diets of silver carp and bighead carp were 45.7% and 54.3%, respectively, based on the delta N-15 values of zooplankton and planktivorous fishes. (C) 2007 Elsevier B.V. All rights reserved

Food web of benthic macro invertebrates in a large Yangtze River-connected lake: the role of flood disturbance

This Study was conducted in Lake Dongtinghu, a large river-connected lake on the Yangtze River flood-plain, China. Our goal was to determine trophic relationships among benthic macroinvertebrates, as well as the effects of flood disturbance on the benthic food web of a river-connected lake. Macroinvertebrates in the lake fed mainly on detritus and plankton (both zooplankton and phytoplankton). Food web Structure in Lake Dongtinghu was characterized by molluscs as the dominant group, low connectance, high level of omnivory. based oil detritus and primary production, and most ingestion concentrating on a few links. Our analyses showed that flood disturbance is an important factor affecting the benthic food web in Lake Dongtinghu. The numbers of species and functional feeding groups (FFGs), and the density and biomass of macroinvertebrates decreased significantly during flooding. Connectance was higher during the flood season than in other seasons, indicating that floods have a strong effect on connectance in this Yangtze River-connected lake. Flood effects on the benthic web were also evident in the decrease of niche overlaps within and anion, FFGs. Our results provide useful information regarding biodiversity conservation on the Yangtze floodplain. Reconstructing and maintaining natural and regular flow regimes between Yangtze lakes and the river is essential for restoration of macroinvertebrates on the floodplain.

Food utilization of adult flatfishes co-occurring in the Bohai Sea of China

Stomach contents were examined of 4527 adult individuals of 12 flatfish species collected during the 1982 - 1983 Bohai Sea Fisheries Resources Investigation. Their food habits, diet diversity, similarity of prey taxa, trophic niche breadth and diet overlap were systematically analysed. Ninety-seven prey species belonging to the Coelenterata, Nemertinea, Polychaeta, Mollusca, Crustacea, Echinodermata, Hemichordata and fish were found and five of them were considered to be principal prey for flatfishes: Alpheus japonicus, Oratosquilla oratoria, Alpheus distinguendus, Loligo japonicus and Crangon affinis. Among the flatfishes, Paralichthys olivaceus was piscivorous, whereas Pseodopleuronectes yokohamae and Pseudopleuronectes herzensteini both had polychaetes and molluscs as their main prey groups. Pleuronichthys cornutus was classified as a polychaete-mollusc eater, with a strong preference for crustaceans. Verasper variegatus, Cynoglossus semilaevis, Eopsetta grigorjewi and Cleisthenes herzensteini ate crustaceans. Kareius bicoloratus was classified as a mollusc-crustacean eater: Cynoglossus abbreviatus, Cynoglossus joyneri and Zebrias zebra were grouped as crustacean-fish eaters. However, Z. zebra also took polychaetes and C. abbreviatus and C. joyneri preyed on some molluscs. Trophic relationships among the flatfishes were complicated, but they occupied distinctive microhabitats in different seasons and selected their specific prey items, which was favourable to the stability of the flatfish community in the Bohai Sea.

Analysis of diets of upland buzzards using stable carbon and nitrogen isotopes

We measured the stable carbon and nitrogen isotope ratios for muscles of the upland buzzards (Buteo hemilasius) and their potential food sources, plateau pikas (Ochotona curzoniae), Qinghai voles (Lasiopodomys fuscus), plateau zokors (Myospalax fontanierii), and several passerine bird species at the alpine meadow in Maduo county, Guoluo prefecture of Qinghai province, People's Republic of China, to provide diet information of upland buzzards, highlighting different diet composition of upland buzzards exposed to different locations. The results demonstrated that stable carbon isotope ratios of upland buzzards, passerine birds, plateau pikas, plateau zokors, and Qinghai voles were -24.42 +/- 0.25parts per thousand, -22.89 +/- 1.48parts per thousand, -25.30 +/- 1.47parts per thousand, -25.78 +/- 0.22parts per thousand, and -25.41 +/- 0.01parts per thousand, respectively, and stable nitrogen isotope ratios were 7.89 +/- 0.38parts per thousand, 8.37 +/- 2.05parts per thousand, 5.83 +/- 1.10parts per thousand, 5.23 +/- 0.34parts per thousand, and 8.86 +/- 0.06parts per thousand, respectively. Fractionation of stable carbon and nitrogen isotope ratios between upland buzzards and their food were 1.03parts per thousand and 2.11parts per thousand, respectively. Based on mass balance principle of stable isotopes and the Euclidean distance mixing model, upland buzzards depended mainly on plateau pikas as food (74.56%). Plateau zokors, Qinghai voles, and passerine birds only contributed a small proportion (25.44%) to diets of upland buzzards. The results were closely accordant with analyses of stomach contents and food pellets, which firmly supported the feasibility of using stable carbon and nitrogen isotope ratios to investigate diet information of upland buzzards. Another study based on stable carbon isotopes showed that upland buzzards living in the Haibei prefecture (another prefecture located in the southeast Qinghai province) mainly preyed on passerine birds (64.96% or more) as food supply. We were alarmed by the preliminary results that widespread poisoning activities of small mammals could reshape the food composition of upland buzzards, influencing the stability and sustainability of the alpine meadow. Bio-control on rodent pests should be carried out rather than the chemical measures.

Relationships between Testate Amoebae Assemblages (Protozoa) and Geographic Factors in Yunnan Plateau Lakes, China

Knowledge of the effect of geographic factors on the assemblages of protozoan testate amoebae is still limited, despite there having been a number of studies on this fauna. We applied statistical analyses to data on the distribution of testate amoebae from nine major lakes in the Yunnan Plateau, southwest China. Cluster analysis, based on community structure, separated the lakes into two groups - the oligotrophic/mesotrophic lakes and the hypercutrophic lakes - confirming the idea that the testate amoebae assemblages in lakes are closely related to the trophic status. Additionally, within the oligotrophic/mesotrophic lakes, there was distinct geographic clustering. Linear regression analysis and the Mantel test both revealed that similarity of species composition decreased with increasing geographic distance among the oligotrophic/mesotrophic lakes.

Dietary-morphological relationships of fishes in Liangzi Lake, China

Species in Liangzi Lake were clustered into four trophic groups: Hemiramphus kurumeus and Hemiculter bleekeri bleekeri fed predominantly on terrestrial insects; Carassius auratus auratus and Abbottina rivularis on non-animal food; Hypseleotris swinhonis, Ctenogobius giurinus, Pseudorasbora parva and Toxabramis swinhonis on cladocerans or copepods; Culterichthys erythropterus on decapod shrimps. Gut length, mouth width, mouth height, gill raker length and gill raker spacing, varied widely among species. With the exception of three species pairs (H. swinhonis, C. glurinus; C. erythropterus, H. kurumeus; T. swinhonis, H. bleekeri bleekeri), principal components analysis of morphological variables revealed over-dispersion of species. Canonical correspondence analysis of dietary and morphological data revealed five significant dietary-morphological correlations. The first three roots explained > 85% of the total variance. The first root reflected mainly the relationship of gut length to non-animal feud, with an increase in gut length associated with an increase in non-animal food. The second root was influenced strongly by the relationship of the gill raker spacing to consumption of copepods, with an increase in gill raker spacing associated positively with copepods in the diet. The third root was influenced by the relationship of mouth gape to consumption of fish and decapod shrimps, with an increase in mouth gape associated with more fish and decapod shrimps in the diet. These significant dietary-morphological relationships supported the eco-morphological hypotheses that fish morphology influence food use, and morphological variation is important in determining ecological segregation of co-existing fish species. (C) 2001 The Fisheries Society of the British Isles.

Surface pigments,algal biomass profiles,and potential production of the euphotic layer:Relationships reinvestigated in view of remote-sensing applications

Maps of surface chlorophyllous pigment (Chl a + Pheo a) are currently produced from ocean color sensors. Transforming such maps into maps of primary production can be reliably done only by using light-production models in conjuction with additional information about the column-integrated pigment content and its vertical distribution. As a preliminary effort in this direction. $\ticksim 4,000$ vertical profiles pigment (Chl a + Pheo a) determined only in oceanic Case 1 waters have been statistically analyzed. They were scaled according to dimensionless depths (actual depth divided by the depth of the euphotic layer, $Z_e$) and expressed as dimensionless concentrations (actual concentration divided by the mean concentration within the euphotic layer). The depth $Z_e$ generally unknown, was computed with a previously develop bio-optical model. Highly sifnificant relationships were found allowing $\langle C \rangle_tot$, the pigment content of the euphotic layer, to be inferred from the surface concentration, $\bar C_pd$, observed within the layer of one penetration depth. According to their $\bar C_pd$ values (ranging from $0.01 to > 10 mg m^-3$), we categorized the profiles into seven trophic situations and computed a mean vertical profile for each. Between a quasi-uniform profile in eutrophic waters and a profile with a strong deep maximum in oligotrophic waters, the shape evolves rather regularly. The wellmixed cold waters, essentially in the Antarctic zone, have been separately examined. On average, their profiles are featureless, without deep maxima, whatever their trophic state. Averaged values their profiles are featureless, without deep maxima, whatever their trophic state. Averaged values their profiles are featureless, without deep maxima, whatever their trophic state. Averaged values of $ρ$, the ratio of Chl a tp (Chl a + Pheo a), have also been obtained for each trophic category. The energy stored by photosynthesizing algae, once normalized with respect to the integrated chlorophyll biomass $\langle C \rangle _tot $ is proportional to the available photosythetic energy at the surface via a parameter $ψ∗$ which is the cross-section for photosynthesis per unit of areal chlorophyll. By tanking advantage of the relative stability of $ψ∗.$ we can compute primary production from ocean color data acquired from space. For such a computation, inputs are the irradiance field at the ocean surface, the "surface" pigment from which $\langle C \rangle _tot$ can be derived, the mean $ρ value pertinent to the trophic situation as depicted by the $\bar C_pd or $\langle C \rangle _tot$ values, and the cross-section $ψ∗$. Instead of a contant $ψ∗.$ value, the mean profiles can be used; they allow the climatological field of the $ψ∗.$ parameter to be adjusted through the parallel use of a spectral light-production model.

Dietary-morphological relationships of fishes in Liangzi Lake, China

Species in Liangzi Lake were clustered into four trophic groups: Hemiramphus kurumeus and Hemiculter bleekeri bleekeri fed predominantly on terrestrial insects; Carassius auratus auratus and Abbottina rivularis on non-animal food; Hypseleotris swinhonis, Ctenogobius giurinus, Pseudorasbora parva and Toxabramis swinhonis on cladocerans or copepods; Culterichthys erythropterus on decapod shrimps. Gut length, mouth width, mouth height, gill raker length and gill raker spacing, varied widely among species. With the exception of three species pairs (H. swinhonis, C. glurinus; C. erythropterus, H. kurumeus; T. swinhonis, H. bleekeri bleekeri), principal components analysis of morphological variables revealed over-dispersion of species. Canonical correspondence analysis of dietary and morphological data revealed five significant dietary-morphological correlations. The first three roots explained > 85% of the total variance. The first root reflected mainly the relationship of gut length to non-animal feud, with an increase in gut length associated with an increase in non-animal food. The second root was influenced strongly by the relationship of the gill raker spacing to consumption of copepods, with an increase in gill raker spacing associated positively with copepods in the diet. The third root was influenced by the relationship of mouth gape to consumption of fish and decapod shrimps, with an increase in mouth gape associated with more fish and decapod shrimps in the diet. These significant dietary-morphological relationships supported the eco-morphological hypotheses that fish morphology influence food use, and morphological variation is important in determining ecological segregation of co-existing fish species. (C) 2001 The Fisheries Society of the British Isles.

Scaling relationships in conical indentation of elastic perfectly plastic solids

Using dimensional analysis and finite element calculations we derive several scaling relationships for conical indentation into elastic-perfectly plastic solids. These scaling relationships provide new insights into the shape of indentation curves and form the basis for understanding indentation measurements, including nano- and micro-indentation techniques. They are also helpful as a guide to numerical and finite element calculations of conical indentation problems. Finally, the scaling relationships are used to reveal the general relationships between hardness, contact area, initial unloading slope, and mechanical properties of solids.

Can stress-strain relationships be obtained from indentation curves using conical and pyramidal indenters?

Applying the scaling relationships developed recently for conical indentation in elastic-plastic solids with work-hardening, we examine the question of whether stress-strain relationships of such solids can be uniquely determined by matching the calculated loading and unloading curves with that measured experimentally. We show that there can be multiple stress-strain curves for a given set of loading and unloading curves. Consequently, stress-strain relationships may not be uniquely determined from loading and unloading curves alone using a conical or pyramidal indenter.

Relationships between hardness, elastic modulus, and the work of indentation

The work done during indentation is examined using dimensional analysis and finite element calculations for conical indentation in elastic-plastic solids with work hardening. An approximate relationship between the ratio of hardness to elastic modulus and the ratio of irreversible work to total work in indentation is found. Consequently, the ratio of hardness to elastic modulus may be obtained directly from measuring the work of indentation. Together with a well-known relationship between elastic modulus, initial unloading slope, and contact area, a new method is then suggested for estimating the hardness and modulus of solids using instrumented indentation with conical or pyramidal indenters.

Scaling relationships in indentation of power-law creep solids using self-similar indenters

We use dimensional analysis to derive scaling relationships for self-similar indenters indenting solids that exhibit power-law creep. We identify the parameter that represents the indentation strain rate. The scaling relationships are applied to several types of indentation creep experiment with constant displacement rate, constant loading rate or constant ratio of loading rate over load. The predictions compare favourably with experimental observations reported in the literature. Finally, a connection is found between creep and 'indentation-size effect' (i.e. changing hardness with indentation depth or load).

Relationships Between Initial Unloading Slope, Contact Depth, and Mechanical Properties for Conical Indentation in Linear Viscoelastic Solids

Using analytical and finite element modeling, we examine the relationships between initial unloading slope, contact depth, and mechanical properties for spherical indentation in viscoelastic solids with either displacement or load as the independent variable. We then investigate whether the Oliver-Pharr method for determining the contact depth and contact radius, originally proposed for indentation in elastic and elastic-plastic solids, is applicable to spherical indentation in viscoelastic solids. Finally, the analytical and numerical results are used to answer questions raised in recent literature about measuring viscoelastic properties from instrumented spherical indentation experiments.