Multi-scale Calculation of Settling Speed of Coarse Particles by Accelerated Stokesian Dynamics without Adjustable Parameter

The calculation of settling speed of coarse particles is firstly addressed, with accelerated Stokesian dynamics without adjustable parameters, in which far field force acting on the particle instead of particle velocity is chosen as dependent variables to consider inter-particle hydrodynamic interactions. The sedimentation of a simple cubic array of spherical particles is simulated and compared to the results available to verify and validate the numerical code and computational scheme. The improvedmethod keeps the same computational cost of the order O(N log N) as usual accelerated Stokesian dynamics does. Then, more realistic random suspension sedimentation is investigated with the help ofMont Carlo method. The computational results agree well with experimental fitting. Finally, the sedimentation of finer cohesive particle, which is often observed in estuary environment, is presented as a further application in coastal engineering.

A fast-settling frequency-presetting PLL frequency synthesizer with process variation compensation and spur reduction

This paper proposes a fast-settling frequency-presetting PLL frequency synthesizer. A mixed-signal VCO and a digital processor are developed to accurately preset the frequency of VCO and greatly reduce the settling time. An auxiliary tuning loop is introduced in order to reduce reference spur caused by leakage current. The digital processor can automatically compensate presetting frequency variation with process and temperature, and control the operation of the auxiliary tuning loop. A 1.2 GHz integer-N synthesizer with 1 MHz reference input Was implemented in a 0.18μm process. The measured results demonstrate that the typical settling time of the synthesizer is less than 3μs,and the phase noise is -108 dBc/Hz@1MHz.The reference spur is -52 dBc.

Settling abalone veliger larvae in a free-swimming microalgal culture

In the current abalone hatchery in China, insufficient diatoms on vertically placed corrugated pvc plates at later stage often could not support the growth of postlarvae up to the stage that they can feed on live macroalgae. As a result, stripping the spats (35 mm) off by anaesthetization and switching the diet from live diatoms to artificial powdered diet in combination has to be performed in most of the abalone farms. This manipulation normally leads to more than 50% mortality. Here we report the direct use of the unicellular green alga Platymonas helgolandica Kylin var. tsingtaoensis as a potential alga to be used to settle the veliger larvae of the Pacific abalone Haliotis discus hannai and to feed the postlarvae. Settlement rate of 2-day-old veliger larvae in mono culture of P helgolandica could be as high as 92% ( +/- 4.2%) on day 10 in small scale trials, higher than that in the selected benthic diatom strain (53.6% +/- 12.7%) when settled in the water in which bacteria propagation was controlled by treatment of 2 ppm of benzylpenicillinum calcium and streptomycin sulfate. Postlarvae fed solely on P. helgolandica or the selected benthic diatom Navicula-2005-A grew at rates of 40.1 ( +/- 1.9) and 45.8 (+/- 13.4) mu m day(-1), respectively, when raised at 22 degrees C until day 50 postfertilization. P. helgolandica was shown to have distinct diurnal settling rhythm characterized with a peak of settled cells in the middle of the night for cell division and a peak of free-swimming cells in the middle of the day. High density of attached P. helgolandica cells on the inner surface of the culture facility in the night fits the nocturnal feeding behavior of the abalone spats. Judged by the promising larvae settling rate, growth and survival rates of the postlarvae fed with this alga, the free-swimming micro-green alga P. helgolandica constitutes a potential species for settling the veliger larvae and for supporting the growth of postlarvae as well. (c) 2006 Published by Elsevier B.V.

Characteristics and flux of settling particulate matter in neritic waters: The southern Yellow Sea and the East China Sea

The typology and flux of settling particulate matter (SPM) were investigated based on sediment trap sampling at six typical stations in the Yellow Sea and the East China Sea. The settling particulate matter in the neritic seas was sorted into three categories, lithogenic particles, living organisms, and particle aggregates. The mass of individual organisms is an important portion of particulate matter in the neritic waters. The aggregates contain six types, mucus aggregates, fecal pellets, diatom aggregates, silicoflagellate aggregates, tintinnids, and miscellaneous aggregates, of which the silicoflagellate aggregates and tintinnids are the most abundant in the Yellow Sea and the East China Sea. High particle fluxes, such as 215 to 874 g m(-2). day(-1) SPM in the bottom layer, were found at three stations where the water was well mixed, and the maximum flux was detected in the boundary area between the Yellow Sea and the East China Sea, where a wide nepheloid layer was present. Hence, particle flux in neritic waters can be easily shifted by water turbulence. The net vertical flux (123 to 961 mg C day(-1)), the contribution of lateral advection to resuspension flux (5 to 76%), and the particulate organic carbon export ratio (18 to 60%) were estimated for the other three stations where the water was stratified. The highest values were all found in the upwelling area off the Zhejiang coast, suggesting that the area of high productivity provides a high net vertical flux of SPM. (C) 2010 Elsevier Ltd. All rights reserved.

Identification of factors affecting the growth and survival of the settling Japanese flounder larvae, Paralichthys olivaceus

A series of experiments were conducted to identify the factors that affected the growth and survival of the settling flounder larvae Paralichthys olivaceus. Settling larvae 24 days after hatching (DAH) were reared in 10-l experimental tanks up to 40 DAH, and two of the following factors were changed as controlled factors in each experiment: light regime (24L:0D or 12L:12D), prey density (1500, 3000, or 5000 Artemia l(-1)), shelter (sand or no sand) and stocking density (5, 10, or 15 fish l(-1)). Early settling larvae (24-35 DAH) experienced little mortality (less than 10% of the overall mortality) that was not significantly affected by above factors. In contrast, late settling larvae (36-40 DAH) suffered high cannibalistic mortality which was significantly influenced by each of the above factors. Larvae experienced significantly lower mortality at 10 fish l(-1) level than at other densities. Larvae at 15 fish l(-1) level had higher mortality than at 5 fish l(-1) when all other factors were identical. Larvae at 3000 and 5000 Artemia l(-1) treatments survived significantly better than at 1500 Artemia l(-1), but no significant differences in larval mortality were found between the two higher densities. Larvae suffered higher mortality at low prey density or at the absence of sand when they were exposed to longer photoperiod. Low stocking density significantly improved the growth of the settling larvae. The average daily instantaneous growth rate (G) at 5 and 15 fish l(-1) treatments were 0.050 and 0.034, with the coefficient of variation (CV) in final length at 16.4 and 23.5, respectively. Daily instantaneous growth rate increased significantly from 0.033 in the 1500 Artemia l(-1) to 0.041 and 0.045 in the 3000 and 5000 Artennia l(-1), respectively, but no significant difference in larval growth existed between the two higher prey densities. These findings suggested that the optimal prey density for growth and survival of the settling flounder larvae at a stocking density of 5 - 15 fish l(-1) was around 3000 Artemia l(-1) . Larvae that were exposed to 24L showed 20% increase in growth ( G = 0.046, CV = 18.7) than those exposed to 12L ( G = 0.037, CV = 20.5). Longer exposure to light significantly improved larval growth, provided sufficient food was available. Sand substrate did not show significant effects on larval growth, possibly because the larvae spent most of the time swimming or feeding in the water column during this stage. (C) 2003 Elsevier Science B.V. All rights reserved.

Effects Of Subgrid-Scale Modeling On Lagrangian Statistics In Large-Eddy Simulation

The application of large-eddy simulation (LES) to turbulent transport processes requires accurate prediction of the Lagrangian statistics of flow fields. However, in most existing SGS models, no explicit consideration is given to Lagrangian statistics. In this paper, we focus on the effects of SGS modeling on Lagrangian statistics in LES ranging from statistics determining single-particle dispersion to those of pair dispersion and multiparticle dispersion. Lagrangian statistics in homogeneous isotropic turbulence are extracted from direct numerical simulation (DNS) and the LES with a spectral eddy-viscosity model. For the case of longtime single-particle dispersion, it is shown that, compared to DNS, LES overpredicts the time scale of the Lagrangian velocity correlation but underpredicts the Lagrangian velocity fluctuation. These two effects tend to cancel one another leading to an accurate prediction of the longtime turbulent dispersion coefficient. Unlike the single-particle dispersion, LES tends to underestimate significantly the rate of relative dispersion of particle pairs and multiple-particles, when initial separation distances are less than the minimum resolved scale due to the lack of subgrid fluctuations. The overprediction of LES on the time scale of the Lagrangian velocity correlation is further confirmed by a theoretical analysis using a turbulence closure theory.

Study on the Performance of a Compact Compound Oil/Gas/Water Separator for Offshore Oil Industry

High-efficiency separation of the oil/gas/water mixtures is a significant issue in offshore oil industry. To reduce the total cost by means of reduction in weight and space compared with conventional separators, a novel compact compound oil/gas/water separator is developed. The research works on oil-gas-water separation by compound separating techniques is described in this paper. The innovative separator is a gravity settling tank with helical pipes within and T-shaped pipes outside. Both experiments and numerical simulations are presented to study the separating performance and efficiency of the helical pipes, which are the main part of the separator.

电子封装中的不流动芯下材料力学性能和封装可靠性的研究

可控坍塌芯片互连（C4）技术可以实现高速、高密度、小外形的封装，因此日渐得到关注和发展。本文针对发展新一代c4技术所面临的不流动芯下材料的机械性能问题，采用具有不同填充颗粒含量的不流动芯下材料，通过对材料的机械性能的测试和分析以及有限元模拟，初步揭示了不流动芯下材料变形行为的特点，填充颗粒含量对芯下材料机械性能的影响，以及芯下材料机械性能和芯下材料工艺导致的颗粒沉积对封装可靠性的影响。首先在差示扫描量热仪（DSC）、热一力学分析仪（TMA）上对材料的固条件、热膨胀系数、玻璃化转变温度进行了测试，接着又在六轴微型试验机上对材料在不同温度和应变率下的应力一应变行为进行了测试。测试结果表明，所用材料的固化条件和玻璃化转变温度可以满足不流动芯下材料的性能要求，材料的热膨胀系数高于芯下材料理想的热膨胀系数值，材料中填充颗粒含量、温度、应变率等对材料的应力一应变行为有重要的影响。为了解芯下材料中填充颗粒含量对机械性能的影响，对不同颗粒含量材料在各测试温度和应变率下的杨氏模量、屈服强度和流动应力进行了对比和分析。结果表明，在各测试条件下，芯下材料的杨氏模量基本随着颗粒含量的增加而升高；温度较低时，材料的屈服强度随颗粒含量的增加而升高，但是，较高温度时，材料的屈服强度和流动应力随着颗粒含量的增加呈现先升高后降低再升高的变化趋势。为理解芯下材料的屈服强度和流动应力随着颗粒含量非单调变化的行为，采用广义Eshelby等效夹杂法对含颗粒试样在单轴拉伸时试样内的应力分布进行了分析，并用纳米硬度计对材料纳米尺度的性能进行了测量。应力分析的结果表明，不流动芯下材料的SiO2填充颗粒的加入会在基体里引起应力集中，应力集中系数随着颗粒含量的增加先升高后降低，试样内的应力集中有使材料屈服强度降低的趋势。纳米硬度计的测试结果表明，芯～卜材料内形成了性能介于颗粒Z基体之间的界面相，界面相的形成有使芯下材料屈服强度提高的趋势。芯下材料屈服强度随着填充颗粒含量的非单调的变化是应力集中和界面效应藕合作用的结果。温度和应变率是影响芯下材料机械性能的重要因素。为刻画温度和应变率的效应，采用Pe化yna模型描述材料的应力一应变行为。结果表明，Per叮na模型可以拟合材料应变率相关的应力一应变行为，描述不流动芯下材料应力一应变曲线的基本趋势，对材料在测试范围外的行为给出较合理的预测，并且Perzyna模型可以很方便地用于ABAQUS中，这将易于工业应用。最后，采用商用有限元程序AB AQus分析了芯下材料机械性能和芯下材料工艺导致的填充颗粒沉积对C4封装可靠性的影响。结果表明，在芯片／基板的缝隙中填入芯下材料可以显著延长可控坍塌倒装封装焊点的热疲劳寿命，提高封装可靠性，可控坍塌倒装封装焊点的热疲劳寿命随着芯下材料中填充颗粒含量的增加而增长；芯下材料中填充颗粒在C4封装基板侧的沉积将导致封装焊点的热疲劳寿命缩短，而颗粒在芯片侧的沉积则可使焊点的热疲劳寿命稍稍延长。

Numerical study on heavy rigid particle motion in a plane wake flow by spectral element method

Experimental particle dispersion patterns in a plane wake flow at a high Reynolds number have been predicted numerically by discrete vortex method (Phys. Fluids A 1992; 4:2244-2251; Int. J. Multiphase Flow 2000; 26:1583-1607). To address the particle motion at a moderate Reynolds number, spectral element method is employed to provide an instantaneous wake flow field for particle dynamics equations, which are solved to make a detail classification of the patterns in relation to the Stokes and Froude numbers. It is found that particle motion features only depend on the Stokes number at a high Froude number and depend on both numbers at a low Froude number. A ratio of the Stokes number to squared Froude number is introduced and threshold values of this parameter are evaluated that delineate the different regions of particle behavior. The parameter describes approximately the gravitational settling velocity divided by the characteristic velocity of wake flow. In order to present effects of particle density but preserve rigid sphere, hollow sphere particle dynamics in the plane wake flow is investigated. The evolution of hollow particle motion patterns for the increase of equivalent particle density corresponds to that of solid particle motion patterns for the decrease of particle size. Although the thresholds change a little, the parameter can still make a good qualitative classification of particle motion patterns as the inner diameter changes.

Subgrid scale fluid velocity timescales seen by inertial particles in large-eddy simulation of particle-laden turbulence

Large-eddy simulation (LES) has emerged as a promising tool for simulating turbulent flows in general and, in recent years,has also been applied to the particle-laden turbulence with some success (Kassinos et al., 2007). The motion of inertial particles is much more complicated than fluid elements, and therefore, LES of turbulent flow laden with inertial particles encounters new challenges. In the conventional LES, only large-scale eddies are explicitly resolved and the effects of unresolved, small or subgrid scale (SGS) eddies on the large-scale eddies are modeled. The SGS turbulent flow field is not available. The effects of SGS turbulent velocity field on particle motion have been studied by Wang and Squires (1996), Armenio et al. (1999), Yamamoto et al. (2001), Shotorban and Mashayek (2006a,b), Fede and Simonin (2006), Berrouk et al. (2007), Bini and Jones (2008), and Pozorski and Apte (2009), amongst others. One contemporary method to include the effects of SGS eddies on inertial particle motions is to introduce a stochastic differential equation (SDE), that is, a Langevin stochastic equation to model the SGS fluid velocity seen by inertial particles (Fede et al., 2006; Shotorban and Mashayek, 2006a; Shotorban and Mashayek, 2006b; Berrouk et al., 2007; Bini and Jones, 2008; Pozorski and Apte, 2009).However, the accuracy of such a Langevin equation model depends primarily on the prescription of the SGS fluid velocity autocorrelation time seen by an inertial particle or the inertial particle–SGS eddy interaction timescale (denoted by $\delt T_{Lp}$ and a second model constant in the diffusion term which controls the intensity of the random force received by an inertial particle (denoted by C_0, see Eq. (7)). From the theoretical point of view, dTLp differs significantly from the Lagrangian fluid velocity correlation time (Reeks, 1977; Wang and Stock, 1993), and this carries the essential nonlinearity in the statistical modeling of particle motion. dTLp and C0 may depend on the filter width and particle Stokes number even for a given turbulent flow. In previous studies, dTLp is modeled either by the fluid SGS Lagrangian timescale (Fede et al., 2006; Shotorban and Mashayek, 2006b; Pozorski and Apte, 2009; Bini and Jones, 2008) or by a simple extension of the timescale obtained from the full flow field (Berrouk et al., 2007). In this work, we shall study the subtle and on-monotonic dependence of $\delt T_{Lp}$ on the filter width and particle Stokes number using a flow field obtained from Direct Numerical Simulation (DNS). We then propose an empirical closure model for $\delta T_{Lp}$. Finally, the model is validated against LES of particle-laden turbulence in predicting single-particle statistics such as particle kinetic energy. As a first step, we consider the particle motion under the one-way coupling assumption in isotropic turbulent flow and neglect the gravitational settling effect. The one-way coupling assumption is only valid for low particle mass loading.

Coagulation removal of melanoidins from biologically treated molasses wastewater using ferric chloride

The pigments (melanoidins) in molasses wastewater are refractory to conventional biological treatment. Ferric chloride was used as coagulant to remove color and chemical oxygen demand (COD) from molasses effluent. Using jar test procedure, main operating conditions such as pH and coagulant dosage were investigated. Under the optimum conditions, up to 86% and 96% of COD and color removal efficiencies were achieved. Residual turbidity in supernatant was less than 5 NTU and Fe3+ concentration was negligible because of effective destabilization and subsequent sedimentation. The results of high performance size exclusion chromatography (HPSEC) show that low molecular weight (MW) fraction of melanoidins is more reactive than high MW fraction and increase in the concentration of the lowest MW organic group is related to the capacity of charge neutralization. Aggregate size measurement reveals the size effect on the settleability of flocs formed, with larger flocs settling more rapidly. Charge neutralization and co-precipitation are proposed as predominant coagulation mechanism under the optimum conditions. (C) 2009 Elsevier B.V. All rights reserved.

Variables affecting melanoidins removal from molasses wastewater by coagulation/flocculation

Coagulation/flocculation process was applied in the polishing treatment of molasses wastewater on a bench-scale. Important operating variables, including coagulant type and dosage, solution pH, rapid mixing conditions as well as the type and dosage of polyeletrolytes were investigated based on the maximum removal efficiencies of chemical oxygen demand (COD) and color, residual turbidity and settling characteristics of flocs. HPSEC was utilized to evaluate the removal of molecular weight fractions of melanoidins-dominated organic compounds. Experimental results indicate that ferric chloride was the most effective among the conventional coagulants, achieving 89% COD and 98% color eliminations; while aluminum sulfate was the least effective, giving COD and color reductions of 66% and 86%, respectively. In addition to metal cations, counter-ions exert significant influence on the coagulation performance since Cl--based metal salts attained better removal efficiency than SO42--based ones at the optimal coagulant dosages. Coagulation of molasses effluent is a highly pH-dependent process, with better removal efficiency achieved at lower pH levels. Rapid mixing intensity, rather than rapid mixing time, has relatively strong influence on the settling characteristics of flocs formed. Lowering mixing intensity resulted in increasing settling rate but the accumulation of floating flocs. When used as coagulant aids, synthetic polyelectrolytes showed little effects on the improvement in organic removal. On the other hand, cationic polyacrylamide was observed to substantially enhance the settleability of flocs as compared to anionic polyacrylamide. The effects of rapid mixing conditions and polymer flocculants on the coagulation performance were discussed. (C) 2009 Elsevier B.V. All rights reserved.

黏性泥沙絮凝沉降的数值研究

盐度等因素对泥沙絮凝沉降的影响是本文的研究目的.考虑了泥沙颗粒在水中的多体相互作用, 以及颗粒间的XDLVO势.分析了盐度、泥沙浓度、Hamaker常数、水合作用对泥沙絮凝沉降的影响.获得的泥沙絮凝沉降速度的拟合公式与计算和试验相符, 对于工程实际有重要参考意义

CaCl_2对细颗粒泥沙静水絮凝沉降的影响

细颗粒泥沙的絮凝或分散对土壤渗透性、土壤可蚀性有重要作用 ,是水土保持研究的重要内容。在 Ca Cl2 浓度为 0～ 1.0 mmol/L ,泥沙浓度为 10 g/L时 ,用吸管法研究了 Ca Cl2 对细颗粒泥沙絮凝沉降的影响。结果表明 :泥沙沉降分 2个阶段 ,分选沉降段和絮凝沉降段 ;在絮凝沉降段 ,Ca Cl2 浓度越大 ,絮凝沉降越快。但较高浓度时 ,细颗粒泥沙平均沉速反而随 Ca Cl2浓度增大而逐渐减小 ;泥沙浓度随时间呈指数衰减 ;细颗粒泥沙絮凝临界粒径为 0 .0 3mm。

有机质、CaCl_2和MgCl_2对细颗粒泥沙絮凝沉降的影响

在CaCl2和MgCl2浓度为0~1.0mmol/L,泥沙浓度为10g/L时,用吸管法研究了有机质、CaCl2和MgCl2对细颗粒泥沙静水絮凝沉降的影响,结果表明,去除有机质后,细颗粒泥沙絮凝沉降加快,其絮凝所需的最佳电解质浓度降低;CaCl2和MgCl2的絮凝能力无明显差异,有机质含量对其几乎没有影响;在相同盐度下,细颗粒泥沙的絮凝沉降速度随电解质摩尔浓度的增大而增大.