Thermodynamic behavior and applications of KMnO4 in cerium separation process using cyanex 923

In this work, studies were carried out on the extraction properties of Mn(II) and MnO4- in sulfuric acid medium using Cyanex 923. Effects of different variables on the extraction of Mn(II) and MnO4-, such as the concentrations of acid, the extractant, and the temperature, were investigated. Results indicated that Mn(II) was extracted weakly by Cyanex 923; however, MnO4- could be strongly extracted into the organic phase. The extraction mechanism of MnO4- was proposed, and the influence of MnO4- on the extraction of cerium was identified when KMnO4 as oxidizer added into the bastnasite sulfuric acid leaching liquor. As MnO4- was easier to be extracted into the organic phase than Ce(IV) and then lost its ability for oxidization, a new device was designed to realize sufficient oxidization of cerium from III to IV, and which has been applied to industrialization.

Integrated lectin affinity microfluidic chip for glycoform separation

Lectin affinity chromatography was miniaturized into a microfluidic format, which results in improvement of performance, as compared to the conventional method. A lectin affinity monolith column was prepared in the microchannel of a microfluidic chip. The porous monolith was fabricated by UV-initiated polymerization of ethylene dimethacrylate (EDMA) and glycidyl methacrylate (GMA) in the presence of porogeneities, followed by immobilization of pisum sativum agglutinin (PSA) on the monolith matrix. Using electroosmosis as the driven force, lectin affinity chromatographies of three kinds of glycoprotein, turkey ovalbumin (TO), chicken ovalbumin (CO), and ovomucoid (OM), were carried out on the microfluidic system. All the glycoproteins were successfully separated into several fractions with different affinities toward the immobilized PSA. The integrated system reduces the time required for the lectin affinity chromatography reaction to similar to3%, thus, the overall analysis time from 4 h to 400 s. Only 300 pg of glycoprotein is required for the whole separation process. Moreover, troublesome operations for lectin affinity chromatography are simplified.

APPLICATION OF POLYBUTADIENE-BASED POLYMERIC SURFACTANTS IN LIQUID MEMBRANE SEPARATION

New polybutadiene-based surfactants (LYF) were synthesized by sulfonation of liquid polybutadiene with acetal sulfate at an elevated temperature, and their properties in a liquid surfactant membrane (LSM) separation process were examined by comparison with the two polyisobutylene-based surfactants ECA4360 and EM301. It was found that LYF surfactants had satisfactory overall properties as regards stability, swelling, and demulsification Of the W/O emulsion in the cases of both acidic and caustic internal aqueous phases.

Macrocyclic polyamine-modified poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith for capillary electrochromatography

1,4,10,13,16-Pentaazatricycloheneicosane-9,17-dione (macrocyclic polyamine)-modified polymer-based monolithic column for CEC was prepared by ring opening reaction of epoxide groups from poly(glycidyl methacrylate-co-ethylene dimethacrylate) (GMA-co-EDMA) monolith with macrocyclic polyamine. Conditions such as reaction time and concentration of macrocyclic polyamine for the modification reaction were optimized to generate substantial EOF and enough chromatographic interactions. Anodic EOF was observed in the pH range of 2.0-8.0 studied due to the protonation of macrcyclic polyamine at the surface of the monolith. Morphology of the monolithic column was examined by SEM and the incorporation of macrocyclic polyamine to the poly(GMA-co-EDMA) monolith was characterized by infrared (IR) spectra. Successful separation of inorganic anions, isomeric benzenediols, and benzoic acid derivatives on the monolithic column was achieved for CEC. In addition to hydrophobic interaction, hydrogen bonding and electrostatic interaction played a significant role in the separation process.

氟碳铈矿分离过程中的氧化问题及工艺改进

针对Cyanex 923萃取分离铈、钍、稀土过程中Ce(IV)在萃取过程中被有机相中的还原性物质还原的问题，提出采用高锰酸钾氧化萃余水相中的Ce(III)。研究结果表明，在酸性条件下，高锰酸钾能有效的氧化水相中的Ce(III)，但在萃取过程中，高锰酸根会先于Ce（IV）被萃入到有机相中，从而失去氧化Ce(III)的能力，由此提出氧化过程必须无含Cyanex 923有机相存在并参与设计了一套油水分离氧化装置。经过高锰酸钾氧化后，萃余水相中铈可低于0.5g/L，铈收率达到98%。 针对攀西氟碳铈矿新流程中直接制备的纳米级氟化铈，考察了氟化铈的紫外吸收性能，发现其在254nm处有特征吸收峰，还考察了分散剂的极性强弱、分散物浓度、粒径、温度及表面包覆等因素对紫外吸收性能的影响；发现随着粒径的减小，紫外吸收峰发生明显的红移；经TiO2包覆后CeF3的紫外吸光域范围扩展。 研究了Cyanex 923与P204组成的双溶剂萃取体系及其单独体系萃取Ce(IV)、F及Ce(IV)-F混液的热力学性质，得出了协同萃取机理，获得了萃取平衡方程式以及协萃物的组成。研究发现混合体系对Ce(IV)及Ce(IV)-F混液中的Ce、F均有明显的协萃作用，这为该萃取体系应用于现实分离中提供了可靠的保证。 在上述工作的基础上，提出了Cyanex 923与P204组成的双溶剂萃取体系分离攀西氟碳铈矿的新清洁冶金流程。对影响这一流程的化学因素进行了系统研究，并给出了工艺运行参数。

胶体体系的固化及分离过程的计算机模拟

胶体体系是自然界很重要的组成部分，广泛应用于工业生产和日常生活中。胶体体系在固化的过程中，会形成有序的晶体结构或无序的玻璃态结构。对胶体的结晶和玻璃化的认识对研究相变理论，纳米材料以及自组装有着重要的意义。事实上，在这一领域存在着许多悬而未决的问题。另一方面，胶体的分离也是胶体科学研究中不可或缺的步骤。特别是近年来微流器件技术的进步为流体动力学色谱分离方法带来了进一步发展的机会，这为胶体的分离提供了非常有效的实验手段。然而，由于实际应用过程的复杂性，理论方法还不足以深入探讨胶体粒子体系固化和分离的本质。作为一种可以直接反映物理过程的研究方法，计算机模拟成为一种有效的研究胶体粒子固化和分离的手段。 硬球模型是一种最简单的胶体粒子体系，能够很好地描述具有体积排斥作用的胶体粒子的行为，因此，对于胶体粒子体系固化问题，我们采用分子动力学方法研究了硬球粒子体系的固化过程。此外，对于胶体和高分子体系的分离过程，我们主要采用耗散分子动力学（dissipative particle dynamics DPD）进行研究。论文的主要内容包括： 1)采用硬球分子动力学模型，研究了胶体颗粒在不同的压缩速率下得到的堆积态的结构异质性。我们应用Lubachevsky-Stillinger方法，在不同的压缩速率下得到了一系列的结构受限的硬球堆积状态。这些体系的有序度随着压缩速率的减小而增加，而体系的密度则是先增加后减小又增加，在中间压缩速率时出现最小值。通过测量体系中的局域序参量分布，粒子位置的均方根涨落分布和直接观察受限粒子的位置，发现这些状态中包含有无规区域和结晶区域，存在显著的结构异质性。特别的是低密度状态中许多小的有序区域互相连接成贯穿体系的逾渗网络，说明晶区之间的结构不匹配是生成这些状态的重要机理。 2)用DPD方法模拟了线性高分子链和星形高分子链在穿越纳米孔道的输运过程。对复合管道中小管的半径分别为2.5 和2.0 的两种情况进行了研究。在各种情况下我们都发现了存在一个临界流量Jc，只有当流量大于Jc的时候高分子才能进入纳米孔洞。对于线性高分子，长链的高分子进入同样粗细的小管所需要的临界流量比短链大。线性链和星形链在半径是2.0小管子中的临界流量比通过半径2.5的管子的临界流量大，或者近似相同。在半径2.5的小管中，星形高分子的临界流量要大于同等尺寸的线性高分子。此外，我们没有观察到不同接枝数的星形高分子的临界流量之间的差异。出现这种情况的原因可能是DPD模型中粒子间的相互作用势能很软，所以不能很好地体现出不同接枝数的星形高分子在位阻上的差异。 3）我们利用DPD方法模拟了圆柱形管道中线性高分子链的输运过程。比较了模拟得到的高分子保留时间和DG理论预测值之间的差异。发现分子量越大的高分子对DG理论的偏离越显著。计算了高分子链在流动过程中伸长的情况，发现了链的伸长率S与Weissenberg number 有着明确的标度关系。与狭缝中的情况类似，对于圆柱型管道中流动的线性高分子，如果采用修饰过的Peclet number，则能够更好地满足Aris-Taylor分散的标度关系。 4)我们建立了纳米粒子在DPD模拟的动力学模型，研究了在本体溶液中纳米粒子的自扩散系数和速度关联函数对与胶体粒子的半径定性关系。发现纳米粒子的扩散系数随粒子半径的增加而减小。纳米粒子的半径越大，其速度关联函数的衰减越慢，同样大小纳米粒子的质量越大，其速度关联函数衰减得越慢。我们进一步模拟了在狭缝中纳米粒子的输运过程。通过观察流体受限方向的流速曲线，我们发现由于与器壁之间的体积排斥作用，使得纳米粒子远离流体的边界。对Aris-Taylor分散的研究结果表明，在λ不大的时候，应用不同的Peclet numbers 对分散方程结果的影响不大。

The application of spline wavelet transform to the determination of electroosmotic mobility in capillary electrophoresis

The rule of current change was studied during capillary electrophoresis (CE) separation process while the conductivity of the sample solution was different from that of the buffer. Using a quadratic spline wavelet of compact support, the wavelet transforms (WTs) of capillary electrophoretic currents were performed. The time corresponding to the maximum of WT coefficients was chosen as the time of current inflection to calculate electroosmotic mobility. The proposed method was suitable for different CE modes, including capillary zone electrophoresis, nonaqueous CE and micellar electrokinctic chromatography. Compared with the neutral marker method, the relative errors of the developed method for the determination of electroosmotic mobility were all below 2.5%. (C) 2002 Elsevier Science B.V. All rights reserved.

AN EXPERIMENTAL-STUDY ON MEMBRANE DISTILLATION FOR TREATMENT OF GINSENG DEW AND GINSENG WASHING WATER

Membrane distillation is a new membrane separation process which has been developed in the last few years. When a piece of microporous hydrophobic membrane separates two kinds of aqueous solutions different in temperature, the solutions cannot transport through the pores of membrane in any directions because of the hydrophobicity of membrane. However, vapor can readily penetrate through the

Kinetics of picosecond laser pulse induced charge separation and proton transfer in bacteriorhodopsin

Bacteriorhodopsin (BR) films oriented by an electrophoretic method are deposited on a transparent conductive ITO glass. A counterelectrode of copper and gelose gel is used to compose a sandwich-type photodetector with the structure of ITO/BR film/gelose gel/Cu. A single 30-ps laser pulse and a mode-locked pulse train are respectively used to excite the BR photodetector. The ultrafast failing edge and the bipolar response signal are measured by the digital oscilloscope under seven different time ranges. Marquardt nonlinear least squares fitting is used to fit all the experimental data and a good fitting equation is found to describe the kinetic process of the photoelectric signal. Data fitting resolves six exponential components that can be assigned to a seven-step BR photocycle model: BR-->K-->KL-->L-->M-->N-->O-->BR. Comparing tests of the BR photodetector with a 100-ps Si PIN photodiode demonstrates that this type of BIR photocletector has at least 100-ps response time and can also serve as a fast photoelectric switch. (C) 2003 Society of Photo-Optical Instrumentation Engineers.

Measurement of Cavity Loss and Quasi-Fermi-Level Separation for Fabry-Perot Semiconductor Lasers

A fitting process is used to measure the cavity loss and the quasi-Fermi-level separation for Fabry- Perot semiconductor lasers. From the amplified spontaneous emission (ASE) spectrum, the gain spectrum and single-pass ASE obtained by the Cassidy method are applied in the fitting process. For a 1550nm quantum well InGaAsP ridge waveguide laser, the cavity loss of about ～24cm~(-1) is obtained.

Capillary electrochromatographic separation of ionizable compounds with a molecular imprinted monolithic cationic exchange column

A polymer-based monolithic capillary column imprinted with 4-aminopyridine (4-AP) was prepared by a thermally-initiated polymerization process; and its performance as a capillary electrochromatographic medium was evaluated in separating 4-AP and 2-AP isomers. The effects of experimental parameters, such as pH value and ionic strength of the buffer, the acetonitrile content in the mobile phase, and the applied voltage, on the resolution of these isomers had been carefully investigated. It was found that in the retention process there were interplays of multiple mechanisms of ion-exchange, molecular imprinting, and electrophoresis. These mechanisms allowed more sophisticated control of experimental parameters in the separation of ionizable compounds.

A simple preparation of stationary phase of alkylamide reversed-phase liquid chromatograph for the separation of basic substances

A simple preparation process of alkylamide phase for reversed-phase HPLC (RP-HPLC) is described. The process includes aminopropyltrimethoxysilane firstly reacted with octanoyl chloride, then the intermediate was coupled onto porous silica. The resultant bonded silica has a reproducible ligand surface concentration and homogenous bonded ligand distribution on the porous silica. Characterization of prepared packing was carried out with elemental analysis, solid-state C-13 NMR and Fourier transform infrared (FT-IR). Chromatographic evaluations were carried out by using a mixture of organic compounds including acidic, basic and neutral analytes under methanol/water as binary mobile phase. The results showed that the stationary phase have excellent chromatographic properties and can be efficiently used for the separation of basic compounds.

Lattice Boltzmann study of hydrodynamic effects in lamellar ordering process of two-dimensional quenched block copolymers

By incorporating self-consistent field theory with lattice Boltzmann method, a model for polymer melts is proposed. Compared with models based on Ginzburg-Landau free energy, our model does not employ phenomenological free energies to describe systems and can consider the chain topological details of polymers. We use this model to study the effects of hydrodynamic interactions on the dynamics of microphase separation for block copolymers. In the early stage of phase separation, an exponential growth predicted by Cahn-Hilliard treatment is found. Simulation results also show that the effect of hydrodynamic interactions can be neglected in the early stage.

Defect evolution and hydrodynamic effects in lamellar ordering process of two-dimensional quenched block copolymers

The effects of hydrodynamic interactions on the lamellar ordering process for two-dimensional quenched block copolymers in the presence of extended defects and the topological defect evolutions in lamellar ordering process are numerically investigated by means of a model based on lattice Boltzmann method and self-consistent field theory. By observing the evolution of the average size of domains, it is found that the domain growth is faster with stronger hydrodynamic effects. The morphological patterns formed also appear different. To study the defect evolution, a defect density is defined and is used to explore the defect evolutions in lamellar ordering process. Our simulation results show that the hydrodynamics effects can reduce the density of defects. With our model, the relations between the Flory-Huggins interaction parameter chi, the length of the polymer chains N, and the defect evolutions are studied.