左中部梭状回枕颞沟内皮质对汉字加工的必要性、选择性和作用性质

A number of functional neuroimaging studies with skilled readers consistently showed activation to visual words in the left mid-fusiform cortex in occipitotemporal sulcus (LMFC-OTS). Neuropsychological studies also showed that lesions at left ventral occipitotemporal areas result in impairment in visual word processing. Based on these empirical observations and some theoretical speculations, a few researchers postulated that the LMFC-OTS is responsible for instant parallel and holistic extraction of the abstract representation of letter strings, and labeled this piece of cortex as “visual word form area” (VWFA). Nonetheless, functional neuroimaging studies alone is basically a correlative rather than causal approach, and lesions in the previous studies were typically not constrained within LMFC-OTS but also involving other brain regions beyond this area. Given these limitations, it remains unanswered for three fundamental questions: is LMFC-OTS necessary for visual word processing? is this functionally selective for visual word processing while unnecessary for processing of non-visual word stimuli? what are its function properties in visual word processing? This thesis aimed to address these questions through a series of neuropsychological, anatomical and functional MRI experiments in four patients with different degrees of impairments in the left fusiform gyrus. Necessity: Detailed analysis of anatomical brain images revealed that the four patients had differential foci of brain infarction. Specifically, the LMFC-OTS was damaged in one patient, while it remained intact in the other three. Neuropsychological experiments showed that the patient with lesions in the LMFC-OTS had severe impairments in reading aloud and recognizing Chinese characters, i.e., pure alexia. The patient with intact LMFC-OTS but information from the left visual field (LVF) was blocked due to lesions in the splenium of corpus callosum, showed impairment in Chinese characters recognition when the stimuli were presented in the LVF but not in the RVF, i.e. left hemialexia. In contrast, the other two patients with intact LMFC-OTS had normal function in processing Chinese characters. The fMRI experiments demonstrated that there was no significant activation to Chinese characters in the LMFC-OTS of the pure alexic patient and of the patient with left hemialexia when the stimuli were presented in the LVF. On the other hand, this patient, when Chinese characters were presented in right visual field, and the other two with intact LMFC-OTS had activation in the LMFC-OTS. These results together point to the necessity of the LMFC-OTS for Chinese character processing. Selectivity: We tested selectivity of the LMFC-OTS for visual word processing through systematically examining the patients’ ability for processing visual vs. auditory words, and word vs. non-word visual stimuli, such as faces, objects and colors. Results showed that the pure alexic patients could normally process auditory words (expression, understanding and repetition of orally presented words) and non-word visual stimuli (faces, objects, colors and numbers). Although the patient showed some impairments in naming faces, objects and colors, his performance scores were only slightly lower or not significantly different relative to those of the patients with intact LMFC-OTS. These data provide compelling evidence that the LMFC-OTS is not requisite for processing non-visual word stimuli, thus has selectivity for visual word processing. Functional properties: With tasks involving multiple levels and aspects of word processing, including Chinese character reading, phonological judgment, semantic judgment, identity judgment of abstract visual word representation, lexical decision, perceptual judgment of visual word appearance, and dictation, copying, voluntary writing, etc., we attempted to reveal the most critical dysfunction caused by damage in the LMFC-OTS, thus to clarify the most essential function of this region. Results showed that in addition to dysfunctions in Chinese character reading, phonological and semantic judgment, the patient with lesions at LMFC-OTS failed to judge correctly whether two characters (including compound and simple characters) with different surface features (e.g., different fonts, printed vs. handwritten vs. calligraphy styles, simplified characters vs. traditional characters, different orientations of strokes or whole characters) had the same abstract representation. The patient initially showed severe impairments in processing both simple characters and compound characters. He could only copy a compound character in a stroke-by-stroke manner, but not by character-by-character or even by radical-by-radical manners. During the recovery process, namely five months later, the patient could complete the abstract representation tasks of simple characters, but showed no improvement for compound characters. However, he then could copy compound characters in a radical-by-radical manner. Furthermore, it seems that the recovery of copying paralleled to that of judgment of abstract representation. These observations indicate that lesions of the LMFC-OTS in the pure alexic patients caused several damage in the ability of extracting the abstract representation from lower level units to higher level units, and the patient had especial difficulty to extract the abstract representation of whole character from its secondary units (e.g., radicals or single characters) and this ability was resistant to recover from impairment. Therefore, the LMFC-OTS appears to be responsible for the multilevel (particularly higher levels) abstract representations of visual word form. Successful extraction seems independent on access to phonological and semantic information, given the alexic patient showed severe impairments in reading aloud and semantic processing on simple characters while maintenance of intact judgment on their abstract representation. However, it is also possible that the interaction between the abstract representation and its related information e.g. phonological and semantic information was damaged as well in this patient. Taken together, we conclude that: 1) the LMFC-OTS is necessary for Chinese character processing, 2) it is selective for Chinese character processing, and 3) its critical function is to extract multiple levels of abstract representation of visual word and possibly to transmit it to phonological and semantic systems.

幼儿绘画表征的发展－－发展过程及其影响因素

Two major questions in this study are the development of children's representative drawing and the influence of semantic representation and image representation on it. Children aged from 3 and a half to 7 participated the experiments. Two-dimension and three-dimension displays were used in four experiments. The results show that: The development of children's representational drawing can be divided into stages. They become maturer in selecting the strategies of the representational drawing, which are different in nature across different ages. There is a development from feature processing to integrative processing in children's drawing. At the feature processing stage, the typological features are represented easily. No matter global or partial. They tend to use unconnected parts to represent, which is called the strategy of distributed representation, those displays without prominent features. In integrative processing stage, the features of two-dimension display are integrated according to its gestalt. And the features of three-dimension display are integrated by its prototypical view across the main axis of the display. Cubic representations were found in some of the children's drawings, but none of them can do it from a perspective view before 7 years old. The semantic processing of the display, both global and partial meaning, can influence the development of the representational drawing. The structural features of the display influence the development of drawing representation. Semantic principles and structural features influence the representational drawings together. For three-dimension display, the semantic face and structural face coexist and work together. Children's ability to draw the display according to the right perspective rather than the prototypical view increase along with them growing up.

汉字形音义加工时间进程的事件相关电位（ERP）研究

The time-courses of orthographic, phonological and semantic processing of Chinese characters were investigated systematically with multi-channel event-related potentials (ERPs). New evidences concerning whether phonology or semantics is processed first and whether phonology mediates semantic access were obtained, supporting and developing the new concept of repetition, overlapping, and alternating processing in Chinese character recognition. Statistic parameter mapping based on physiological double dissociation has been developed. Seven experiments were conducted: I) deciding which type of structure, left-right or non-left-right, the character displayed on the screen was; 2) deciding whether or not there was a vowel/a/in the pronunciation of the character; 3) deciding which classification, natural object or non-natural object, the character was; 4) deciding which color, red or green, the character was; 5) deciding which color, red or green, the non-character was; 6) fixing on the non-character; 7) fixing on the crosslet. The main results are: 1. N240 and P240:N240 and P240 localized at occipital and prefrontal respectively were found in experiments 1, 2, 3, and 4, but not in experiments 5, 6, or 7. The difference between the former 4 and the latter 3 experiments was only their stimuli: the former's were true Chinese characters while the latter's were non-characters or crosslet. Thus Chinese characters were related to these two components, which reflected unique processing of Chinese characters peaking at about 240 msec. 2. Basic visual feature analysis: In comparison with experiment 7 there was a common cognitive process in experiments 1, 2, 4, and 6 - basic visual feature analysis. The corresponding ERP amplitude increase in most sites started from about 60 msec. 3. Orthography: The ERP differences located at the main processing area of orthography (occipital) between experiments 1, 2, 3, 4 and experiment 5 started from about 130 msec. This was the category difference between Chinese characters and non-characters, which revealed that orthographic processing started from about 130 msec. The ERP differences between the experiments 1, 2, 3 and the experiment 4 occurred in 210-250, 230-240, and 190-250 msec respectively, suggesting orthography was processed again. These were the differences between language and non-language tasks, which revealed a higher level processing than that in the above mentioned 130 msec. All the phenomena imply that the orthographic processing does not finished in one time of processing; the second time of processing is not a simple repetition, but a higher level one. 4. Phonology: The ERPs of experiment 2 (phonological task) were significantly stronger than those of experiment 3 (semantic task) at the main processing areas of phonology (temporal and left prefrontal) starting from about 270 msec, which revealed phonologic processing. The ERP differences at left frontal between experiment 2 and experiment 1 (orthographic task) started from about 250 msec. When comparing phonological task with experiment 4 (character color decision), the ERP differences at left temporal and prefrontal started from about 220 msec. Thus phonological processing may start before 220 msec. 5. Semantic: The ERPs of experiment 3 (semantic task) were significantly stronger than those of experiment 2 (phonological task) at the main processing areas of semantics (parietal and occipital) starting from about 290 msec, which revealed semantic processing. The ERP differences at these areas between experiment 3 and experiment 4 (character color decision) started from about 270 msec. The ERP differences between experiment 3 and experiment 1 (orthographic task) started from about 260 msec. Thus semantic processing may start before 260 msec. 6. Overlapping of phonological and semantic processing: From about 270 to 350 msec, the ERPs of experiment 2 (phonological task) were significantly larger than those of experiment 3 (semantic task) at the main processing areas of phonology (temporal and left prefrontal); while from about 290-360 msec, the ERPs of experiment 3 were significantly larger than those of experiment 2 at the main processing areas of semantics (frontal, parietal, and occipital). Thus phonological processing may start earlier than semantic and their time-courses may alternate, which reveals parallel processing. 7. Semantic processing needs part phonology: When experiment 1 (orthographic task) served as baseline, the ERPs of experiment 2 and 3 (phonological and semantic tasks) significantly increased at the main processing areas of phonology (left temporal and frontal) starting from about 250 msec. The ERPs of experiment 3, besides, increased significantly at the main processing areas of semantics (parietal and frontal) starting from about 260 msec. When experiment 4 (character color decision) served as baseline, the ERPs of experiment 2 and 3 significantly increased at phonological areas (left temporal and frontal) starting from about 220 msec. The ERPs of experiment 3, similarly, increased significantly at semantic areas (parietal and frontal) starting from about270 msec. Hence, before semantic processing, a part of phonological information may be required. The conclusion could be got from above results in the present experimental conditions: 1. The basic visual feature processing starts from about 60 msec; 2. Orthographic processing starts from about 130 msec, and repeats at about 240 msec. The second processing is not simple repetition of the first one, but a higher level processing; 3. Phonological processing begins earlier than semantic, and their time-courses overlap; 4. Before semantic processing, a part of phonological information may be required; 5. The repetition, overlapping, and alternating of the orthographic, phonological and semantic processing of Chinese characters could exist in cognition. Thus the problem of whether phonology mediates semantics access is not a simple, but a complicated issue.

A Numerical Model of Rapid Solidification Processing of Ni-Al Alloy in Planar Flow Casting

A numerical model has been developed for simulating the rapid solidification processing (RSP) of Ni-Al alloy in order to predict the resultant phase composition semi-quantitatively during RSP. The present model couples the initial nucleation temperature evaluating method based on the time dependent nucleation theory, and solidified volume fraction calculation model based on the kinetics model of dendrite growth in undercooled melt. This model has been applied to predict the cooling curve and the volume fraction of solidified phases of Ni-Al alloy in planar flow casting. The numerical results agree with the experimental results semi-quantitatively.

Tailoring of dendritic microstructure in solidification processing by crucible vibration

We analyzed the effects of both natural convection and forced flows on solid–liquid interface morphology during upward Bridgman solidification of metallic alloys. Experiments were carried out on Al–3.5wt% Ni alloy, for a cylindrical sample. The influence of natural convection induced by radial thermal gradient on solidified microstructure was first analyzed as a function of the pulling rate. Then, the influence of axial vibration on solidification microstructure was experimentally investigated by varying vibration parameters (frequency and amplitude). Experimental results demonstrated that vibrations could be used to either attenuate fluid flow in the melt and obtain a uniform dendritic pattern or to promote a fragmented dendritic microstructure. However, no marked effect was observed for cellular growth. This pointed out the critical role of the mushy zone in the interaction between fluid flow and solidification microstructure.

Influence of the Processing Conditions on the Characteristics of the Clad Layers Produced with Laminar Plasma Technology

Laminar plasma technology was used to produce ceramic hardened layers of Al2O3-40% mass Ni composite powders on stainless steel substrates. In order to investigate the influences of processing conditions on the morphologies of the surface modified layers, two different powder-feeding methods were tested, one with carrier gas called the powder injection method, and the other without carrier gas called powder transfers method. The microscopic investigations demonstrate that the cross-section of the clad layers consists of two distinct microstructural regions, in which the Al2O3 phases exhibit different growth mechanisms. When the powder transfers method is adopted, the number density and volume fraction of the Al2O3 particles increase considerably and their distributions exhibit zonal periodical characteristics. When the powder-feeding rate increases, the microstructure of the Al2O3 phases changes from a small globular to a long needle shape. Finite element simulations show that the transient thermo-physical features of the pool substances, such as solidification rate and cooling rate, influence strongly the mechanisms of the nucleation and the directional growth of the Al2O3 phases in the thermal processing.

Determination of Proper Processing Conditions of Material Surface Heat Treatment Through Finite Element Method

A two-dimensional model has been developed based on the experimental results of stainless steel remelting with the laminar plasma technology to investigate the transient thermo-physical characteristics of the melt pool liquids. The influence of the temperature field, temperature gradient, solidification rate and cooling rate on the processing conditions has been investigated numerically. Not only have the appropriate processing conditions been determined according to the calculations, but also they have been predicted with a criterion established based on the concept of equivalent temperature area density (ETAD) that is actually a function of the processing parameters and material properties. The comparison between the resulting conditions shows that the ETAD method can better predict the optimum condition.

Three-Dimensional Modeling of Heat Transfer and Fluid Flow in Laminar-Plasma Material Re-Melting Processing

Modeling study is performed concerning the heat transfer and fluid flow for a laminar argon plasma jet impinging normally upon a flat workpiece exposed to the ambient air. The diffusion of the air into the plasma jet is handled by using the combined-diffusion-coefficient approach. The heat flux density and jet shear stress distributions at the workpiece surface obtained from the plasma jet modeling are then used to study the re-melting process of a carbon steel workpiece. Besides the heat conduction within the workpiece, the effects of the plasma-jet inlet parameters (temperature and velocity), workpiece moving speed, Marangoni convection, natural convection etc. on the re-melting process are considered. The modeling results demonstrate that the shapes and sizes of the molten pool in the workpiece are influenced appreciably by the plasma-jet inlet parameters, workpiece moving speed and Marangoni convection. The jet shear stress manifests its effect at higher plasma-jet inlet velocities, while the natural convection effect can be ignored. The modeling results of the molten pool sizes agree reasonably with available experimental data.

Numerical Simulation of Transient Thermal Features in the Remelting Processing of Stainless Steel

应用有限元方法对层流等离子体射流不锈钢表面重熔工艺中的瞬态热物理现象进行了数值模拟研究.针对不同加热距离,确定了材料熔化和凝固过程中的瞬态温度场、温度梯度和凝固率的时间和空间分布特征.通过引入等效温度面积密度概念,研究了不锈钢重熔热处理的适合条件.结果表明,9～13mm的范围是较为适宜的加热距离,该结果与试验观察基本符合.

Preliminary Investigations on Low-Pressure Laminar Plasma Spray Processing

The usual plasma spraying methods often involve entrainment of the surrounding air into the turbulent plasma core and result in coated materials having relatively high porosity and low adhesive strength. Therefore, exploration of new plasma spraying methods for fabricating high quality coatings to meet the requirement of special applications will be quite important. In this study, an alternative plasma spraying method, i.e. the low-pressure laminar plasma spraying process, is investigated and used in an attempt for spraying thermal barrier coatings (TBCs). Investigations on the characteristics of the laminar plasma jets, feeding methods for the ceramic powder and the formation process of the individual quenched splats have been carried out. The properties of the TBCs sprayed by laminar plasma jet process, such as the adhesive strength at the interface of the ceramic coating/bond coat, the surface roughness and microstructure, are examined by tensile tests and scanning electron microscope (SEM) observations.

Investigation of Laminar Plasma Remelting/Cladding Processing

Investigation of remelting and cladding processing with laminar plasma jets on several metals has been conducted looking for possible development of a new surface modification technique. The remelting tests illustrated that the new method could evidently improve the material microstructure and properties of cast iron. The cladding was done with Al2O3 ceramic powder on stainless steel. The energy dispersive spectra (EDS) analysis was used to determine the distribution of the major cladding element in the plasma-processed layers, for which the microstructure observations and hardness measurements were also performed.

Digitized Processing Track Generation of a Computer Integrated Multi-Functional 5-Axis Laser Processing System

Based on the computer integrated and flexible laser processing system, an intelligent measuring sub-system was developed. A novel model has been built up to compensate the deviations of the main frame-structure, and a new 3-D laser tracker system is applied to adjust the accuracy of the system. To analyze the characteristic of all kind surfaces of automobile outer penal moulds and dies, classification of types of the surface、brim and ridge(or vale) area to be measured and processed has been established, resulting in one of the main processing functions of the laser processing system. According to different type of surfaces, a 2-D adaptive measuring method based on B?zier curve was developed; furthermore a 3-D adaptive measuring method based on Spline curve was also developed. According to the laser materials processing characteristics and data characteristics, necessary methods have been developed to generate processing tracks, they are explained in details. Measuring experiments and laser processing experiments were carried out to testify the above mentioned methods, which have been applied in the computer integrated and flexible laser processing system developed by the Institute of Mechanics, CAS.

Processing Simulation of Virtual Manufacture in Laser Surface Treatmenthang

Processing simulation is at the bottom of the coral technology of VM and is also difficult due to the complexity of mechanism and diversity of parameters. Previously much research has been mainly carried out on the geometrical simulation or physical simulation respectively. The aim of this paper is to study the processing simulation in laser surface treatment based on the mechanism, put forward the architecture of the whole processing simulation and give the models of the processing. As a result the data structure layers in the whole simulation is presented.