Microsatellite marker isolation and cultured strain identification in Carassius auratus gibelio

Microsatellites have become the preferred molecular markers for strain selection and genetic breeding in fish. In this study a total of 105 microsatellites were isolated and identified in gibel carp (Carassius auratus gibelio) by microsatellite sequence searches in GenBank and other databases and by screening and sequencing of positive clones from the genomic library enriched for AG and GATA repeats. Moreover, nineteen microsatellites were randomly selected to design locus-specific primer pairs, and these were successfully used to identify and discriminate different cultured strains of gibel carp including strains A, D, L, and F. Three different types of microsatellite pattern were distinguished by the number and length of fragments amplified from the 19 primer pairs, and some microsatellite primer pairs were found to produce different microsatellite patterns among strains and strain-specific fragments. In addition, some duplicated alleles were also detected in two microsatellite patterns. Therefore, the current study provides direct molecular markers to discriminate among different cultured strains for selective breeding and aquaculture practice of gibel carp.

Isolation and characterization of 18 polymorphic microsatellite markers in Chinese mandarin fish Siniperca chuatsi (Basilewsky)

Eighteen microsatellite markers were isolated and characterized using an enrichment protocol in the Chinese mandarin fish Siniperca chuatsi (Basilewsky), a commercially important piscivorous fish in China. Out of 48 pairs of primers designed, 18 loci exhibited polymorphism with three to six alleles (mean 4.4 alleles/locus) and average observed heterozygosity ranged from 0.633 to 0.833 (mean 0.748) in a test population from Dongting Lake of China. Except for two loci, all other 16 loci were in the Hardy-Weinberg equilibrium. These markers would be useful for such studies as population genetics, ecology and selective breeding of the Chinese mandarin fish in future.

Isolation and characterization of six microsatellite markers in the large yellow croaker (Pseudosciaena crocea Richardson)

Six polymorphic microsatellite markers were isolated and characterized using an enriched library technique in the large yellow croaker (Pseudosciaena crocea Richardson, 1864), a commercially important marine fish in China. They showed PIC (polymorphism information content) ranging from 0.064 to 0.885 (average of 0.580) and allele numbers ranging from two to 13 (average of 7.5), which were useful for the studies on population genetics and selective breeding of the large yellow croaker.

Genetic heterogeneity analysis and RAPD marker detection among four forms of Atrina pectinata Linnaeus

Pen shell (Atrina pectinata Linnaeus) can be distinguished into four forms based on the morphololgic characteristics. Genetic similarity, and heterogeneity were analyzed among the four forms by random amplified polymorphic DNA (RAPD) technique using 24 10-nucleotide-long primers. Of these primers, 22 pruners produced well-identifiable RAPD band patterns. Significant differences in RAPD band patterns were revealed among the four forms. A total of 198 polymorphic fragments were scored from 22 pruners. and they are specific for one form, shared by two or three forms. Several pruners, such as S451, S453 S463 S464, S470. S473 and S474, produced abundant band patterns and provided sufficient information for reliable discrimination of the four forms. The average genetic distances and phylogenetic relationships were calculated and analyzed according to the distinguishable fragments. The data indicate that pen shells of form G and form Y are similar not only among individuals within the same form, but also between individuals from the two forms, and that shells of form T and form S are highly divergent. The constructed phylogenetic free matches the average genetic distances. Three clusters were clearly distinguishable, in which two were corresponding to form S and form T respectively and one included forms G and Y. This Study will be benefit to further studies oil the taxonomy and selective breeding of Pinnid species. It is suggested that the four forms of pen shell should be categorized to at least two species taxonomically.

PCR-RFLP analysis of mitochondrial DNA ND5/6 region among 3 subspecies of common carp (Cyprinus carpio L.) and its application to genetic discrimination of subspecies

Mitochondrial DNA ND5/6 region was studied by PCR-RFLP analysis among ten representative strains belonging to three subspecies (Cyprinus carpio carpio, Cyprinus carpio haematopterus and Cyprinus carpio rubrofuscus) of common carp (Cyprinus carpio L.). A total of 2.4 kb fragment was amplified and subjected to restriction endonuclease analysis with nine restriction endonucleases subsequently. The results indicated that each subspecies owned one hyplotype and four restriction enzymes (Dde I, HaeIII, Taq I and Mbo I) produced diagnostic restriction sites which could be used for discriminating the three subspecies and as molecular genetic markers for assistant selective breeding of common carp.

Molecular analysis of silver crucian carp (Carassius auratus gibelio Bloch) clones by SCAR markers

Random amplified polymorphic DNA (RAPD) molecular markers specific for one, two or three clones have been identified from five gynogenetic clones of silver crucian carp (Carassius auratus gibelio Bloch) using RAPD markers developed earlier. In this study, three RAPD markers (RA1-PA, RA2-EF and RA4-D) produced by Opj-1, and two RAPD DNA fragments (RA3-PAD and RA5-D) produced by Opj-7, were selected for molecular cloning and sequencing. Sequence data indicated that there were identical 801-bp nucleotide sequences in the shared marker RA1-PA cloned respectively from clones P and A, and the shared marker RA2-EF (which was cloned from clones E and F), were also of identical 958-by nucleotide sequences. The nucleotide sequences of the shared marker RA3-PAD fragments were also similar for 1181 by among clones P, A and D. The specific fragment RA4-D was composed of 628 bp, and the fragment RA5-D from clone D contained 385 nucleotides. According to the nucleotide sequences, we designed and synthesized five pairs of sequence characterized amplified regions (SCAR) primers to identify the specific fragments in these gynogenetic clones of silver crucian carp. Only individuals from clones P and A amplified a specific band using a pair of SCI-PA primers synthesized according to the marker RA1-PA sequences, whereas no products were detected in individuals from clones D, E and F. The PCR products amplified using SC2-EF and SC3-PAD primers were as expected. Furthermore, the pair of SC4-D primers amplified specific bands only in individuals from clone D, although weak bands could be produced in all individuals of the five clones when lower annealing temperatures were used. However, an additional pair of SC5-D primers designed from the RA5-D marker sequences could amplify a DNA band in individuals from clones P, A and D, and the same weak band was produced in clone E, whereas no products were detected in individuals from clone F. Searches in GenBank revealed that the 385-bp DNA fragment from RA5-D was homologous to the 5' end of gonadotropin I beta subunit 2 gene and growth hormone gene. No homologous sequences were found for other markers in GenBank. The SCAR markers identified in this study will offer a powerful, easy, and rapid method for discrimination of different clones and for genetic analyses that examine their origins and unique reproductive modes in crucian carp. Furthermore, they will likely benefit future selective breeding programs as reliable and reproducible molecular markers. (C) 2001 Elsevier Science B.V. All rights reserved.

Construction of AFLP-based genetic linkage map for Zhikong scallop, Chlamys farreri Jones et Preston and mapping of sex-linked markers

Zhikong scallop (Chlamys farreri) is an economically important aquaculture species in China; however, frequent mass mortality seriously affects the development of its industry. Genetic linkage map is useful for genetic improvement and selective breeding of C. farreri. Linkage maps were constructed using an intraspecific F-1 cross and amplified fragment length polymorphism (AFLP) markers. Thirty-two selected AFLP primer combinations produced 545 AFLP markers that were polymorphic in either of the parents and segregated in the progeny. Of these segregating markers, 166 were mapped to 19 linkage groups of the female framework map, covering a total of 1503.9 cM, with an average marker spacing of 10.2 cM; and 197 markers were assigned to 20 linkage groups of the male map, covering a total of 1630.7 cM, with 9.2 cM per marker. A sex-linked marker was mapped on the female map with zero recombination and a LOD of 27.3. The genetic length of C farreri genome was estimated as 1889.0 cM for the female and 1995.9 cM for the male. The coverage of the framework map was calculated as 79.6% for the female and 81.7% for the male. When the triplets and doublets were considered, the observed length of the map was calculated as 1610.2 cM with coverage of 85.2% for the female, and 1880.5 cM with coverage of 94.2% for the male. The genetic maps presented here will serve as a basis for the construction of a high-resolution genetic map and mapping of economically important genes. (C) 2004 Published by Elsevier B.V.

Loss of allele diversity in introduced populations of the hermaphroditic bay scallop Argopecten irradians

The bay scallop Argopecten irradians is a hermaphroditic bivalve native to the Atlantic coast of the United States that was introduced to China for aquaculture production in 1982. It now supports a major aquaculture industry in China. Introduced species often start with limited genetic variability, which is problematic for the further selective breeding. Bay scallop aquaculture is exclusively hatchery based and as the initial introduction consisted of only 26 scallops, there have been concerns about inbreeding and inbreeding depression in cultured populations in China. In this study, eleven simple sequence repeat (SSR) markers were used to compare genetic variation in cultured populations from China with that in a natural population from the east coast of America. Although the difference in heterozygosity was small, the Chinese populations lost 9 of the 45 alleles (20%) found in the wild population. The reduced allele diversity suggests that the Chinese bay scallop populations experienced a bottleneck in genetic diversity that remains significant despite several recent introductions of new stocks aimed at expanding the gene pool. The loss of allele diversity may affect future efforts in selective breeding and domestication, and results of this study highlight the need for additional introductions, advanced breeding programs that minimize inbreeding and continued genetic monitoring. (c) 2007 Elsevier B.V. All rights reserved.

Production of a base population and its responses to F-1 selection in the bay scallop, Argopecten irradians irradians Lamarck (1819)

A base population of the bay scallop, Argopecten irradians irradians Lamarck, was produced by crossing two cultured bay scallop populations. After 1 year of rearing, the top 10% truncation selection of the top 10% (i=1.755) was carried out in the base population of about 1300 adults. A control parental group with a an identical number to the select parental group was randomly selected from the entire population before isolation of the select parental group. The result showed that, at the larval stage, the growth rate of larvae in the selected line was significantly higher than that of the control (P < 0.05), and that the genetic gain was 6.78%. Owing to the lower density of control at the spat stage, the mean shell length of the control line was larger than that of the select line at day 100. When the same density was adjusted between two lines in the grow-out stage (from day 100 to 160), the daily growth rate of the selected line was significantly higher than that of the control line (P < 0.05). Survival of the select line was significantly larger than that of the control line in the grow-out stage. In conclusion, the results obtained from this experiment indicate that selective breeding from a base population with a high genetic diversity established by mass spawning between different populations appears to be a promising method of genetic improvement in bay scallop, A. irradians irradians Lamarck.

Genetic parameter estimates for growth traits at early stage of Pacific abalone, Haliotis discus hannai Ino

Heritability and genetic and phenotypic correlations were estimated for juvenile growth traits of Pacific abalone Haliotis discus hannai Ino. The estimates were calculated from shell length and shell width measurements on progeny resulting from 12 half-sib families and 36 full-sib families obtained using artificial fertilization of mating three females to each male. The measurements were taken at 10, 20 and 30 d after fertilization. It was found that heritability estimates based on sire component ranged from 0.23 to 0.36 for shell length and 0.21 to 0.32 for shell width. Heritability estimates from dam component were larger than those from sire component at three ages, indicating presence of maternal effects, non-additive genetic effects and common environmental effects. Phenotypic correlations were significant at three ages (P < 0.05), with values of 0.92, 0.93 and 0.92, respectively. Genetic correlations from the paternal half-sib correlation analysis were highly positive at three ages, with values of 0.50, 0.78 and 0.81, respectively. The results suggest that selective breeding is an effective approach to improving growth traits of Pacific abalone stocks.

Sustained response to selection in an introduced population of the hermaphroditic bay scallop Argopecten irradians irradians Lamarck (1819)

Introduced species often start with limited genetic variability, which is problematic for selective breeding. The problem of inbreeding can be exasperated by hermaphroditism. The bay scallop Argopecten irradians irradians is a hermaphroditic species that has been introduced to and now supports a major aquaculture industry in China. Positive response to selection for fast growth was observed in one of the less inbred stocks in a previous study. In this study, we evaluated selection for the second generation to determine if response to selection can be sustained in this introduced population of a hermaphroditic species. Response to selection, realized heritability for the second generation, cumulative (over two generations), current (for the second generation) and residual (from the first generation) genetic gains were estimated by comparing three different types of lines: SS (selected for two generation), SC (selected for the first generation only) and CC (unselected for two generations). The SS line grew significantly faster (P < 0.05) than the other two lines, indicating that the second generation selection for faster growth is still effective. Response to selection and realized heritability for the second generation were 0.612 +/- 0.101 and 0.349 +/- 0.057, respectively, which are similar to those observed for the first generation. The cumulative, current, and residual gains were 17.56 +/- 5.30%, 10.63 +/- 2.46%, and 6.25 +/- 3.13%, respectively. The sustained response to selection for the second generation observed here suggests that considerable genetic variability exists in this population and that future efforts on selective breeding are likely to be fruitful. (c) 2005 Elsevier B.V. All rights reserved.

One possible way to promote the bond-selective chemical-reactions by frequency-modulated lasers

It is proposed in this paper that we can use frequency-modulated (FM) lasers to realize bond-selective chemical reactions or to raise the efficiency of molecular isotope separation. Examples are given for HF molecule and the C–H bond in some hydrocarbons.

Mechanism study of femtosecond laser induced selective metallization (FLISM) on glass surfaces

We investigate the mechanism of selective metallization on glass surfaces with the assistance of femtosecond laser irradiation followed by electroless plating. Irradiation of femtosecond laser makes it possible to selectively deposit copper microstructures in the irradiated area on glass surfaces coated with silver nitrate films. The energy-dispersive X-ray (EDX) analyses reveal that silver atoms are produced on the surface of grooves formed by laser ablation, which serve as catalysis seeds for subsequent electroless copper plating. (C) 2008 Elsevier B.V. All rights reserved.

Fabrication of an integrated Raman sensor by selective surface metallization using a femtosecond laser oscillator

We demonstrate that a Raman sensor integrated with a micro-heater, a microfluidic chamber, and a surface-enhanced Raman scattering (SERS) substrate can be fabricated in a glass chip by femtosecond laser micromachining. The micro-heater and the SERS substrate are fabricated by selective metallization on the glass surface using a femtosecond laser oscillator, whereas the microfluidic chamber embedded in the glass sample is fabricated by femtosecond laser ablation using a femtosecond laser amplifier. We believed that this new strategy for fabricating multifunctional integrated microchips has great potential application for lab-on-a-chips. (C) 2008 Elsevier B.V. All rights reserved.

Selective metallization on insulator surfaces with femtosecond laser pulses

We report selective metallization on surfaces of insulators ( glass slides and lithium niobate crystal) based on femtosecond laser modification combined with electroless plating. The process is mainly composed of four steps: (1) formation of silver nitrate thin films on the surfaces of glass or crystal substrates; (2) generation of silver particles in the irradiated area by femtosecond laser direct writing; (3) removal of unirradiated silver nitrate films; and (4) selective electroless plating in the modified area. We discuss the mechanism of selective metallization on the insulators. Moreover, we investigate the electrical and adhesive properties of the copper microstructures patterned on the insulator surfaces, showing great potential of integrating electrical functions into lab-on-a-chip devices. (C) 2007 Optical Society of America.